Stas Schubboden 13.50 "Biostar" nakup rabljenega (6.299)

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Ncsdofi Nmwopfx Aibsr Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Nodpfxjfi Nmpe Aibocr Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2022, naslednji pregled (TÜV): 02/2027, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Mobile & WhatsApp Fynn Jacobsen ----Well-maintained moving floor trailer with excellent floor condition! - Immediately available and ready for operation STAS Moving Floor Trailer “bioSTAR” Semi-Trailer 92 m³ First registration: 16/02/2022 VIN: YE6S300ZXM0002146 Inspection valid until: 02/2027 Technical capacity: 42,000 kg / Permissible total weight: 36,000 kg Information in German:* Internal dimensions: * Length approx. 13,500 mm * Width approx. 2,475 mm (pallet width) * Height at front approx. 2,650 mm * Height at rear approx. 2,825 mm * Volume approx. 92 m³ * Full aluminium construction (low tare weight / corrosion-resistant) * Self-supporting aluminium structure with welded cross beams * Premium aluminium alloy AlMgSi 1 / F31 * 3 x 9 t JOST axles with disc brakes * Automatic lift axle with traction aid * Wabco Smartboard installed * Air suspension / ECAS air suspension system * R.S.S. Roll Stability System * Tyres: 385/65 R22.5 * 6 steel rims * Wabco EBS-E braking system 2S/2M * Equipped with odometer, axle load display, fault memory, ODR data logger * Cargo Floor CF500 SLC reinforced moving floor system (21 profiles) * 10 mm reinforced profiles * 3 hydraulic cylinders * Radio remote control * Electric control unit at rear left * Emergency stop function * INOX reinforced wear plate / reinforced end pieces Ncedjy Ei E Topfx Aiber * Pump capacity up to max. 110 l/min * Working pressure 225 bar * 10 mm reinforced moving floor boards * Suitable for highly adhesive bulk goods * Drive-over design for forklifts and pallet trucks * Interior body fully welded * Self-supporting aluminium structure * Fifth wheel height 1,150–1,200 mm * Sliding end wall for complete unloading with rail cleaners * Pneumatic central locking system * 12 pairs of recessed lashing rings in the body * 2 access ladders * 3 fixed steel mirrors (reinforced version) * 4 lateral tension belts with hand ratchets * Extendable ladder at right rear * Tool holder on side underrun protection Left loading side newly painted / Roof tarp newly replaced Note: All offers are provided without new TÜV inspection.

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 90 m³, Leto izdelave: 2022, Oprema: ABS, Vehicle identification no.: YE6S300ZXN0000950 German MOT due FRAME: ALUMINIUM – Welded aluminium construction with additional reinforcement at axle mounts Nodpfx Aieylfafobecr Unladen weight: 7,650 kg Volume: approx. 90.0 m³ Dimensions: 13,500 x 2,475 x 2,565/2,752 mm Side walls inside & outside smooth Side wall profiles approx. 600 mm wide, 30 mm thick, 3 mm inside, 2 mm outside (grain design) FLOOR BOARDS: 21 aluminium floor boards, 7 mm smooth, extremely durable with welded aluminium end caps Cramaro overquick with electric remote control MERCEDES-BENZ JOST axles with disc brakes 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Crank-operated landing gear Tyres: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel ALUMINIUM wheels Changes, prior sale and errors excepted. This description serves as general identification of the vehicle and does not constitute a warranty in the legal sense. The contractual description at the time of sale is binding. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we would be pleased to provide a quote from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories Ncodpfxsyh S Aio Aibsr 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Ncedpfx Aijgcw Rmebor Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.641 mm, prostornina tovornega prostora: 906 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor (walking floor) * King pin load (National, t): 12 * Axle load (National, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor semi-trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Activation of traction aid via button in truck (installation of button not included) and by pressing brake pedal three times * Option: 3rd axle with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via smartboard as well as lift/lower valve * Pneumatic coupling head: European palm coupling * Control console: EBS control on driver's side, behind axles * Standard smartboard * Air and electrical console centrally mounted with gantry * Landing legs: Weweler * As steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation and 2 speed stages * Position of landing leg crank handle: outside * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Steel * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 LED reversing lights, mounted at rear left and right on the lamp holder * Work lights (operated via switch): 2 LED reversing lights at front left and right, mounted near landing legs * Protection of lighting unit: One-piece mudguard * LEDs in door end cross member: 2 x 3-function LED * Operating underrun protection: Fixed underrun bar * Mud flaps underrun protection: Black with STAS logo * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: Swivel coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling - hose: 3,000 mm * Hydraulic coupling - position: Connection possible at front wall (additional connection possible at landing legs) * Hydraulic positioning: Pressure return, pressure left, return right (CON) * Number of mud flaps on fenders: 2 pieces * Toolbox * Air connection mounted laterally on control panel * Aluminium access ladder 3.80 m - right side * Broom and shovel holder * Two plastic wheel chocks * Profile front wall: 3 mm - 2 mm * Profile side wall: 3 mm - 2 mm * Moving floor system: Cargo Floor brand * Floor system operation: Radio remote control * Cargo Floor Control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Front wall inclination (°): 90 Ncedpfoy Dmu Njx Aibjr * Rear wall inclination (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Residue emptying wall: Aluminium * Storage for residue emptying wall: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: Swing door, 1/2 to 1/2 division, with door end cross member

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 03/2026, Oprema: ABS, Stas S300ZX Moving Floor Trailer 90 m³ * 90 m³ loading volume * SAF axles * 1st and 3rd axle liftable * Air suspension * Pneumatic control * Disc brakes * Sliding tarpaulin * Smartboard * Double-wing rear doors with rotary bar lock * Access ladder and platform at the front wall * ABS connection * 2 x 7-pin electrical connections Ncjdpexycilofx Aiber * ISO air couplings with red and yellow coupling heads * 21 wooden floor slats * Lashing rings on the sides of the loading area * Foldable rear light protection * Loading pressure gauge Subject to prior sale and errors excepted! Sale exclusively according to our general terms and conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some of these may result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Information: This sales advertisement does not constitute an offer in the sense of §145 of the German Civil Code (BGB). Rather, it serves as information to initiate a contract. All information provided here is without guarantee and does not constitute warranted characteristics.

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 09/2019, skupna dolžina: 14.000 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, medosna razdalja: 9.160 mm, barva: siv, Leto izdelave: 2019, Konfiguracija osi Dimenzija pnevmatik: 385/65R22.5 Znamka osi: JOST Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Največja dovoljena obremenitev: 9.000 kg; profil pnevmatike levo: 50%; profil pnevmatike desno: 50% Zadnja os 2: Največja dovoljena obremenitev: 9.000 kg; profil pnevmatike levo: 80%; profil pnevmatike desno: 80% Zadnja os 3: Največja dovoljena obremenitev: 9.000 kg; profil pnevmatike levo: 50%; profil pnevmatike desno: 50% Teže Lastna masa: 7.440 kg Nosilnost: 34.560 kg Ncodpjx Trmiofx Aibor Dovoljena skupna masa: 42.000 kg Vzdrževanje Tehnični pregled: veljaven do 09.2026 Identifikacija Registrska številka: OR-26-YP Dodatne informacije Za več informacij se obrnite na Boba Beukersa.

Stanje: novo, največja dovoljena obremenitev: 34.200 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.820 mm, prostornina tovornega prostora: 91 m³, Leto izdelave: 2026, Oprema: ABS, Stock no. 5739 Immediately available! Purchase, rental, or hire-purchase options available upon request! Approx. 91 m³ Stas moving floor semi-trailer with 10m floor / radio remote control / front service door / RENT / PURCHASE ---- * Manufacturer: Stas * Model: S300ZX Biostar * Year of manufacture: 2026 * Gross weight: 42,000 kg * Unladen weight (manufacturer specification): 7,800 kg * Payload: 34,200 kg * Axles: 3x SAF with 1st axle as lift axle and traction aid / disc brakes * Tyres: 385/65 R22.5 on steel rims * Suspension: Air suspension with ECAS lift/lower function * EBS * Volume: approx. 91m³ (13.50 m length x 2.47 m width x 2.82 m height) * Colour: Superstructure RAL 9006 / Tarpaulin black SIO7999 / Chassis galvanised * Double-wing rear doors with pneumatic locking * Extendable step ladder on right side * Lift axle traction aid via truck push button * Smartboard * Telescopic landing legs * PVC toolbox 830x500x470 mm * 2 LED reversing lights rear left and right * 2 additional LED reversing lights at landing legs * 1 interior front wall LED * Ecoled 2 LED rear lights * Cargo Floor 10 mm ribbed floor CF500SL-C -E Control * V2A stainless steel end plate * Additional plastic guides under floor profiles * Radio remote control * Moving partition wall * Sliding roof with tension straps Panama 900 g/m² * Tarpaulin fasteners * Front service door Ncsdpfx Aieyz H Spobsr * 2 x 3 LEDs in rear crossmember above door * Smartboard German semi-trailer!! German documentation!! NEW VEHICLE!! Notice regarding potential errors in the listing: Despite careful creation of the listing, occasional errors may occur in the text or details. We assume no liability for mistakes, alterations, or prior sale. All information is supplied without guarantee. Please contact us to confirm details or for any further questions.

Stanje: novo, največja dovoljena obremenitev: 29.710 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.610 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Leto izdelave: 2026, Oprema: ABS, New vehicle – available for purchase, rental, or lease with purchase option, subject to agreement! STAS 60 m³ moving floor trailer with Cargo Floor system and remote control – Rental option available! ---- * Manufacturer: Stas * Model: Farmstar * First registration: - (new vehicle) * Colour: Superstructure RAL 9007 grey aluminium, chassis RAL 9005 black, tarpaulin black * Volume: 60 m³ (approx. 10.61 m long x 2.475 m wide x 2.30 m high) * Gross weight: 39,000 kg (technical) / 36,000 kg (permitted) * Unladen weight (according to registration): 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle lift axle / starting aid / disc brakes * Tyres: 385/65R 22.5 NEW on Speedline Diamond aluminium rims * Suspension: Air suspension with lift & lower * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-board floor system with additional plastic inserts beneath the floor profiles * Floor end caps stainless steel * 6 mm ribbed floor * Moving bulkhead with stainless steel handles * Control box rear left * Operating platform with access steps front right and left * Hydraulic connections front with 3 m hoses (additionally connectable to landing legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2x locking rods and 1x pneumatic lock * Sidewalls smooth (grain specification), fully welded inside and out * Roll-top tarpaulin (680g/m²) with central locking * 3x cross members * Single mudguards * Full-load support legs * Tool box rear right * Shovel and broom holder left Nedeyz H S Aepfx Aibscr * Smartboard * TPMS – tyre pressure monitoring system * Aluminium ladder right * Extendable ladder rear right * Rear aluminium buffer * One-piece foldable aluminium plate to protect rear lights * 2x LED work lights (left + right) * 2x LED reversing lights rear * 2 x 3 LEDs in door header rail New vehicle – available immediately! Available for rental, purchase, or lease with purchase option (subject to prior agreement)! Disclaimer regarding potential listing errors: Despite careful preparation, errors may occur in the text or technical data. We assume no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify any questions.

Stanje: rabljeno, največja dovoljena obremenitev: 29.560 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Leto izdelave: 2025, Oprema: ABS, Stock no. 5768 Approx. 60m³ Stas Agrar Moving Floor Trailer with Grain Hopper / Radio Remote Control / Rental Option Available! ---- * Manufacturer: Stas * Model: Farmstar - Agricultural Moving Floor * First Registration: 09/2025 * Gross Vehicle Weight: 36,000 kg * Unladen Weight (per registration documents): 6,440 kg * Payload: 29,560 kg * Axles: 3x Jost axles / 1st axle with lift function & start assist / disc brakes * Suspension: Air suspension with raise/lower function * Tyres: 385/65 R22.5 with Alcoa matte aluminium rims, approx. 50% * EBS * Colour: Chassis RAL 9005, Body RAL 9010, Tarp SIO 601 Opal Green * Capacity: approx. 60m³ (10.60m length x 2.55m width x 2.30m height) * TÜV: 09/2026 * CARGO FLOOR CF 500 SL-C with radio remote and control panel on left side in front of axles * 21-slot floor slat system, 6mm ribbed * Welded aluminium end caps * Rear closure plate made of aluminium * Integrated grain hopper * Additional guides below the floor slats * Complete emptying wall with brushes and stainless steel handles * Front wall made of aluminium plank profiles * Service door in the front wall * Side walls with smooth finish inside/outside for grain transport, fully welded * Inspection window at rear left side wall * Swing doors (50/50) * 4x locking rods * 2x sample hatches (left and right) * Swingable rear cross beam above doors * Operating platform with access steps front left and right * Fifth wheel height: 1,150mm * Single mudguards * Full load supports (aluminium drop supports) * Roll tarp (680g/m²) with quick-lock system * Foldable aluminium roof bows * Foldable aluminium rear light protection Nodpfjywq Rbjx Aibjcr * Aluminium air reservoirs * Tool box on the right * Shovel and broom holder on the left * 1x 2.50m aluminium extension ladder, right side * 1x extendable ladder at rear right * Smartboard * TPMS tyre pressure monitoring system * LED rear lights ECOLED III * 1 owner German trailer! German documents! Rental Option Available! Note on possible errors in this listing: Despite careful preparation, errors may accidentally appear in the description or details. No liability will be assumed for mistakes, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or if you have further questions.

Stanje: rabljeno, lastna masa: 7.590 kg, največja dovoljena obremenitev: 28.410 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2021, prostornina tovornega prostora: 92 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, STAS Moving Floor Trailer | Type S300ZX, Grain Hopper, Remote Control | 7mm Floor, Extreme Durabright | Toolbox with Air Hose, 2 Lift Axles | Air Suspension, Spare Wheel Holder | Unladen Weight: 7,590 kg, Payload: 28,410 kg | Tires: 385/65 R22.5 | Jost Axles with Disc Brakes Seller: Christopher Glock German/English Mobile: (Whatsapp) Email: christopher. Full Inventory at: Hofgasse 25, A-4063 Hörsching | Subject to error, input mistakes, and prior sale. | Sale to trade customers only Nedpfxswqqy Ao Aibocr

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2025, prostornina tovornega prostora: 100 m³, Leto izdelave: 2023, Oprema: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR – STEERED AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross Vehicle Weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm Nodpfx Aioxplxzsbscr TECHNICAL DESCRIPTION 1. CHASSIS FIFTH WHEEL HEIGHT: Exact fifth wheel height is 1,150 mm. AXLES: Tridem axle set. Manufacturer: SAF – CUSTOM DESIGN (CD). Capacity: 3 x 9 t. Suspension: Original SAF air suspension. Brakes: Large disc brakes. Rim offset: ET 120. Wear indicator: with. First axle is an automatic lift axle controlled by the EBS-E system. The third axle is a trailing steer axle. Connection: BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID: The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lift and lower function. Aluminium air tank. STEERING AXLE LOCKING: Trailing steering axle locking is achieved as follows: – via reverse lights – with a button in the truck (truck equipment not included). TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. BRAKING SYSTEM – EBS: EBS-E system WABCO 2S/2M – PREMIUM MODULATOR. Two-line compressed air brake system according to CE directives. Spring-loaded parking brake on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING – ASPÖCK: 24 volt electrical system. 2 x 7-pin + 1 x 15-pin sockets ISO connection. Aspöck light set. Orange LED side marker lights mounted on trailer side. Without rear distribution box – NORDIC. REAR LIGHTS IN UNDERRUN PROTECTION: Lighting is mounted in fixed aluminium underrun guard. With foldable aluminium light protection cover. 2 x 1 five-chamber lights – EUROPOINT III – LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection below the body ahead of the landing legs. ACCESSORIES EXTENDABLE LADDER REAR: Extendable ladder integrated at the rear of the vehicle (right-hand side). PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm). SPARE WHEEL HOLDER: Aluminium single spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminium plank profiles. INTERIOR SEALING BETWEEN FLOOR AND FRONT WALL: Fixed seal between floor and front wall using aluminium profile and PVC seal. SIDE WALLS: Smooth finish inside and out. Double-walled side wall profiles: 600 mm wide, 30 mm thick, 3 mm inner, 2 mm outer (grain version). Side wall profiles are continuously welded on the inside. WEAR PLATE: Wear plate in aluminium, rectangular, at rear inside, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electronic control. 21-board floor system. Drive segment comprises 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear stainless steel end plate. FLOOR OPERATION: E-control – Electric with radio remote control (original Cargo Floor). Loading – stop – unloading via switch. Manual emergency operation via unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 ribbed aluminium floor boards – 8 mm thick with welded aluminium end caps. REAR DOOR: 2 portal doors ...

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvižna os Njdpfx Aisw Rit Tsbscr * ALU platišča * JOST osi * Pomikajoča cerada * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje Podpora preko WhatsAppa na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Ncjdpfxsgcw Rij Aiber Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: novo, največja dovoljena obremenitev: 28.240 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.820 mm, prostornina tovornega prostora: 91 m³, Oprema: ABS, Stock No. 5559 New vehicle in stock – available immediately! Purchase, rental, or rent-to-own options available by arrangement! Side tarpaulin retrofittable at extra cost! Stas 91 m² moving floor trailer / 10 mm flat floor / TÜV load certification ---- * Manufacturer: Stas * Model: BIOSTAR - Moving Floor * First registration: - (new vehicle) * Colour: Galvanized chassis, body RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50 m length x 2.475 m width x 2.64–2.82 m height) * Gross weight: 36,000 kg * Unladen weight (vehicle registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle liftable / traction aid / disc brakes * Tyres: 385/65 R22.5 new on Speedline Diamond aluminium rims * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise/lower function * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box rear left * 21 floor boards, 10 mm flat * 12 pairs of recessed lashing rings in the floor * End caps made of welded aluminium Nedpfx Asv Emk Uoibocr * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall * Swing doors (50/50) with pneumatic locking * 2x locking rods * Pivoting cross member for door closure * Hydraulic connections at the front with 3 m hoses and * Connection possibility below the body without hoses * Operating platform with access front left * Fifth wheel height: 1,150 mm * Single wheel arches * Full-load support legs * Rear aluminium lighting guard (single-piece, foldable) * Roll tarp (900g/m²) with tension belts * Steel roof bows, folding, and lengthwise tension belts * 1x toolbox rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tyre pressure monitoring system * Aluminium underrun protection bumper at rear * 1x pull-out ladder, rear right * 2x LED work lights in front of the axles * 2x LED reversing lights, rear * 1x LED work light front wall, inside * 2 x 3-function lights in the top door cross member New vehicle in stock – available immediately! Purchase, rental, or rent-to-own options available by arrangement! Note regarding possible errors in the listing: Despite careful preparation, errors may have occurred in the text or specifications. We assume no liability for errors, changes, or intermediate sales. Information provided without guarantee. Please contact us to verify details or for further questions.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.179 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.800 mm, Oprema: ABS, * Stas premična tla * Pokrivna ponjava * ALU platišča * SAF osi Nsdpexu Th Uefx Aibocr * Lastna teža: 7790 kg * Leto izdelave: Interna številka vozila: 11498-----Pridržane so napake in vmesna prodaja

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.435 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.690 mm, * JOST axles Njdpsv Hlwiefx Aibjcr * Air suspension * Lift axle * Wabco SmartBoard * Storage box * Aluminum rims * Tarpaulin cover -----Internal vehicle number: 10290----Subject to errors and prior sale.

Stanje: novo, največja dovoljena obremenitev: 29.560 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Oprema: ABS, Stock no. 5640 Purchase, rent, or rent with a purchase option by arrangement! Approx. 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS Ncsdpexl Ntuefx Aibsr * Model: FARMSTAR – Agricultural Moving Floor Trailer * First registration: - (new vehicle) * Colour: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500 * Capacity: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle lift axle + traction aid / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25 m * Suspension: Air suspension with raise and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer’s spec): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and rear left operating console * 21-board floor system, 6 mm ribbed * Welded aluminium end caps * Rear closure plate in aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue discharge wall with brushes and stainless steel handles * Front wall made of aluminium plank profiles * Service door in front wall * Side walls with smooth finish inside and out (grain specification), fully welded * Observation window on left rear side wall * Swing doors (50/50) * 4x locking rods * Swivelling cross member at the door closure * Hydraulic connections front with 3 m hoses and * Connection possibility under body without hoses * Pressure 1" female * Return 1" female * Operator’s platform with steps front left and right * Fifth wheel height: 1,150 mm * Single wheel mudguards * Heavy-duty landing legs * Rolling tarpaulin (900g/m²) with quick-lock system * Foldable aluminium roof bows * Foldable aluminium rear light protection * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left * 1x aluminium step ladder, 2x 8-steps, mounted right * 1x extendable ladder at rear, right side * Smartboard * TPMS tyre pressure monitoring system * 5-chamber LED tail lights * 2x LED work lights in front of axles * 2x LED reversing lights rear * 1x LED work light, front wall interior * 2 x 3-function lamps installed in upper door cross member Purchase, rent, or rent with a purchase option by arrangement! Notice regarding possible errors in the listing: Despite careful creation of the listing, there may occasionally be errors in the text or details provided. We accept no liability for errors, changes, or prior sale. All information is without guarantee. Please contact us to verify details or for further inquiries.

Stanje: rabljeno, največja dovoljena obremenitev: 32.447 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration 01/2023, one owner Mileage 188,744 km Ncedpfx Aijy Dy E Uober Internal dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (conical design) Unladen weight: 9,640 kg Continuous 5 mm Hardox steel HB450 floor Front and side walls in 3 mm Hardox steel HB450 Pneumatically folding rear underrun protection Straight front wall, interior access ladder Rear portal doors 50:50, pneumatic remote unlocking Reinforced roof tarpaulin with roll-up mechanism HYVA tipping cylinder Type Alpha, low pressure 2x pneumatic vibrators JOST full-load crank landing legs SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with rollover protection RSS WABCO Smartboard Lifting and lowering device Automatic tipping lowering function 6x tyres 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox left side 4x LED reversing spotlights RENTING is the new BUYING – available immediately as full-service rental with us

Stanje: rabljeno, največja dovoljena obremenitev: 32.410 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2024, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration 02/2024, one owner Mileage: 152,200 km Internal dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls made of 3 mm Hardox steel HB450 Pneumatically retractable rear underrun protection Straight front wall, internal access ladder Rear portal doors 50:50 split, pneumatic remote unlocking Heavy-duty reinforced sliding roof tarpaulin HYVA tipping cylinder, Alpha type, low-pressure 2x pneumatic vibrators JOST crank landing legs, full load Ncjdpfx Aijy Dy Hrjbjr SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE WABCO trailer EBS with rollover stability support (RSS) WABCO Smartboard Lifting and lowering device Automatic tipping lowering function Tyres: 6 x 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on left side 4x LED reversing lights RENTING is the new BUYING – now available for immediate full-service rental with us -----

Stanje: rabljeno, največja dovoljena obremenitev: 32.590 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2027, dolžina tovornega prostora: 9.665 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, skupna širina: 2.550 mm, skupna višina: 3.690 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3- osovinska aluminijumska kiper prikolica 52 cbm Erstzulassung 04/2024 Ukupna kilometraža 152.817 km Dimenzije unutrašnjosti (DxŠxV): 9.665 x 2.475 x 2.165 mm Širina za palete Neto težina 6.410 kg Pod potpuno izrađen od 8 mm ALU sa tvrdoćom 110 Brinell Prednji zid 4 mm ALU Bočni zidovi profilisani 3 mm-2 mm, glatka izvedba iznutra i spolja Dvokrilna kombi vrata sa klatnom funkcijom, pneumatsko naknadno otključavanje 2 komada kliznih otvora za žitarice sa 1x vrećom za zaštitu od prašine Ojačana krovna rolo cerada HYVA kip cilindar tip Alpha, pogodan za visok i nizak pritisak Ručno podizanje poluprikolice za punu nosivost SAF osovine sa velikim disk kočnicama, 430 mm 1. osovina podizna osovina WABCO Trailer-EBS sa zaštitom od proklizavanja RSS WABCO Smartboard uređaj za podizanje i spuštanje Pneumatici 385/65 R 22.5 Aluminijumske pristupne merdevine Držač za lopatu i metlu Kutija za alat sa desne strane 4x LED zadnja radna svetla IZNAJMLJIVANJE je nova kupovina, kod nas dostupna i u full-service najmu odmah! Ncjdpfx Aey Dy Hfeibjr

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.355 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 608 m³, skupna širina: 2.550 mm, skupna višina: 2.165 mm, Leto izdelave: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load (national): 12 t * Axle load (national): 8 t * Axle spacing (mm): 1310-1310 * Coupling height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-value: 0800 * Total width (mm): 2550 Ncodpfxey Dmv Ho Aibor * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Total length (mm): 12355 * Brake version: Disc brake * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Activation of traction aid via push button in the truck (installation of button not included in scope of supply) and by threefold actuation of the brake pedal * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake lining wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as switch on chassis * Pneumatic coupling head: European palm coupling * Control console: EBS controls on left side in direction of travel, in front of axles * Standard Smartboard * Landing gears: Weweler * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tire type: Regional * TPMS sensor type: rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Work lamp position (activated by switch): 2 LED reversing lights rear left and right, mounted on lamp bracket * Work lamp position (activated by switch): 2 LED reversing lights front left and right, mounted in area of landing gears * LEDs in door end crossmember: 2 x 3-function LED * Underrun protection operated manually * Spray flaps underrun protection: Black with STAS logo * Cylinder tipping angle: Normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Tipping cylinder max. pressure: 250 * Surface treatment of cylinder stages: Standard surface * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Splash guard type mudguard: Clear Pass * Toolbox: 860x520x500 * Air connection left side, mounted on lamp carrier * 3 m aluminum access ladder * Two plastic chocks * Safety device chassis - body: Rubber polyps Body: * Front wall slope (°): 90 * Rear wall slope (°): 90 * Inner lower rail profile slope (°): 90 * Front wall: 4 mm (Aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads mounted below the floor crossmembers * Rear wall type: Combination door * Rear wall: Aluminum * Combination door type: 1/2 - 1/2 with swivelling door end crossmember * Door end crossmember in swivelling design * Slide position: 2 pieces, left + right * Additional rear wall locking: Pneumatic double-acting * Operation of additional lock: automatic during unloading, additionally manually via control on the side of the control panel * Quantity and position of bows: 3 center bows (centrally, evenly spaced) and 1 rear bow (at rear) * Bow type hinge position: right

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, skupna širina: 2.550 mm, skupna višina: 2.165 mm, Leto izdelave: 2026, Equipment: * Chassis material: Aluminium Nsdpfxey Dmvmj Aibocr * Chassis type: V-chassis * Kingpin load (National): 12 t * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm): 2165 * Internal height rear (mm): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of the air suspension during tipping, can be locked manually via Smartboard or switch on chassis * Pneumatic coupling head: European Palm Coupling * EBS control panel on the left-hand side in the direction of travel, in front of the axles * Standard Smartboard * Air and electric console on the right-hand side in the direction of travel * Landing gears: Weweler as steel gear landing gears, type Weweler, with compensation feet, single-sided operation and 2 speed settings * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: regional distance * TPMS sensor type: rim-mounted sensor * TPMS sensor * Wheel nut caps: Chrome with STAS logo * Work light position (operated by switch): 2 LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp bracket * Work light position (operated by switch): 2 LED reversing lights at the front, left and right in the direction of travel, mounted in the area of the landing gears * LEDs in rear cross member: 2 x 3-function LED * Manual underrun protection operation * Towing eye: 2 pieces, left and right * Rear underrun splash guards: Black with STAS logo * Cylinder tipping angle: Normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white line * Number of mudflap pieces on mudguard: 2 * Mudflap type (on mudguard): asphalt * Toolbox: 860x520x500 * Aluminium access ladder 3 m - right side in direction of travel * Holder for broom and shovel * Ferry rings * 2 lashing eyes at rear of chassis * 2 plastic wheel chocks * Body retention device: chassis - body rubber buffer Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm aluminium * Sidewall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads attached below floor cross members * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with pivoting door end cross member * Right door leaf opens first * Door end cross member: pivoting design * Hinge type: double door hinge * Sliding shutter: rectangular design * Position of shutter: 1 piece, centered * Grain outlet / dust sack: 1 grain hopper incl. dust sack * Smooth surface on rear wall * Open door leafs are fixed using a chain * ...