Müller-Mitteltal Müller Eal-Ta-P 10,5 Tandempritsche nakup rabljenega (38.708)

Stanje: rabljeno, lastna masa: 4.400 kg, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2012, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Location of vehicle: Bovenden, 2-axle, turntable trailer, air suspension, lift/lower function, ABS (anti-lock braking system), lashing eyes, container locks, twin tyres, toolbox. Body: 2-axle turntable flatbed trailer with insertable stanchions and TwistLock fasteners, TwistLock extendable to 3m. 20t, drum brakes, air suspension, 10t Gigant axles, ramp shaft 40x16cm. Gusdpfxjt Uq D Ts Aiajf Loading ramps available for an extra charge of €1,000! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Stanje: rabljeno, lastna masa: 5.150 kg, največja dovoljena obremenitev: 12.850 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2007, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, osi BPW, vrtljiva prikolica, zračno vzmetenje, dviganje in spuščanje, ABS (protiblokirni sistem), pritrdilne zanke, blokada kontejnerja, U-zaščita, bočna aluminijasta zaščita, dvojne pnevmatike, zaboj za orodje, nihajna vrata. Nadgradnja: 2-osna ploščadna prikolica z aluminijastimi stranskimi stenami in twist-lock zaporami, 2x BPW osi, bobnaste zavore! Nakladalna višina ca. 950 mm! Podatki o dodatni opremi brez garancije, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Gedpfjx A H S Aex Aiajuf

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 910 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear supports, side aluminum underrun protection, twin tires, storage box Body: Hydraulic ramps, extendable to 3m. BPW axles, drum brakes, lashing rings on the outer sides. Ramp length approx. 4000mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Godpfjqpgtmjx Aiaeuf

Stanje: rabljeno, lastna masa: 11.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2015, naslednji pregled (TÜV): 04/2027, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.720 mm, višina nakladalnega prostora: 950 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 5-osni, suknjič, zračno vzmetenje, zadnja os krmiljena, ABS (protiblokirni sistem), privezne točke, dvodelne nakladalne rampe, hidravlične rampe, zadnje podpore, stranska aluminijasta zaščita, dvojne gume. Gjdpsy U N Nwofx Aiasuf Nadgradnja: 5-osna nizkopodna prikolica s hidravličnima dvodelnima nakladalnima rampama, 5x 10t Gigant osi, bobnaste zavore, zadnja os krmiljena! Na prvih treh oseh so novo nameščene zavorne obloge! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake so pridržane!

Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Gusdpfx Aijywvhrjajf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in oprema = - Rezervno kolo - Dvojne pnevmatike = Opombe = Müller Mitteltal 2-osni nizkopodni priklopnik T5 2AL z rampami Zračno vzmetenje BPW osi ABS ZSA Pnevmatike 60% GR 235R17,5 ID številka 665 Z veseljem vas pričakujemo za svetovanje, podpis pogodbe ali prevzem vozila v našem avtohiši. Prosimo, da se predhodno dogovorite za termin. Če ne morete priti k nam, vam celoten postopek uredimo tudi po telefonu/e-pošti/WhatsAppu/faksu. Po želji vam novo vozilo dostavimo neposredno na vaš dom. To za vas pomeni najboljšo ceno, največjo varnost in udobje pri nakupu vozila. Odkup rabljenih vozil Z veseljem odkupimo vaše rabljeno vozilo. Ponujamo vam možnost digitalne ocene vozila na podlagi vaših fotografij, brez obiska avtohiše. Naša specializirana odkupna ekipa vam zagotovi najvišjo odkupno ceno. Na željo vam po vsej Nemčiji dostavimo izbrano "rabljeno vozilo" neposredno do vaših vrat ter vaše rabljeno vozilo vzamemo s seboj. Financiranje - Leasing Takojšnja odobritev in poplačilo starega kredita. Vaš specializiran partner za osebna vozila, dostavnike, gospodarska vozila in gradbene stroje. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrijska cona) Obiščite našo spletno stran Vedno preko 400 vozil na zalogi Navedbe v oglasih, na spletu, cenikih in slikah so nezavezujoči opisi in ne pomenijo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti ali jamstva za tipkarske napake oziroma napake pri prenosu podatkov. Oprema, navedena v oglasu, je lahko predmet posebnega preverjanja. Ponudba je na splošno brez nove TÜV homologacije - z veseljem izdelamo ponudbo v sodelovanju z našim partnerskim servisom. Možnost napak in predhodne prodaje pridržana. = Dodatne informacije = Guodpfx Aijxw T Uaoaof Lastna teža: 8.900 kg Nosilnost: 26.100 kg Dovoljena skupna masa: 35.000 kg Prodajna cena: 18.000 € / 20.890 US$

Stanje: rabljeno, največja dovoljena obremenitev: 17.290 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS * 5-komorni zadnje luči * Oranžna rotacijska luč * Duomatik zračni priključek * BPW-ECO osi ----Nadgradnja: nizkopodni priklopnik, pocinkan okvir (1900+7000mm)/nakladalna višina pribl. 900 mm, zadaj poševno znižano/pristopna višina pribl. 770 mm, jeklena/lesena tla, razširljiv na 3 m, hidravlične nakladalne rampe (pocinkane) s protidrsno prevleko, prav tako hidravlično pomične v stran, vpenjalni obroči Gusdjyulu Uspfx Aiasf Prodaja samo pravnim osebam. PRI IZVOZU JE PLAČILO MOŽNO LE NETO ZNESEK!!!!! VSE INFORMACIJE BREZ GARANCIJE VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji poslovanja (glejte impressum).

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2010, 3-osni nizek priklopnik, dostopen od zadaj. Dovoljena skupna masa 30.000 kg, nosilnost 22.700 kg. Nakladalna površina 8.900 mm (7.000 + 1.900) x 2.550 mm, opozorilni paket za prekomerno širino, 12 pritrdilnih ušes ter 8 žepov za stebričke z možnostjo istočasnega pritrjevanja, 6 orodnih zabojev. Dvodelne hidravlične rampe cca. 2.100+2.000 x 800 mm z gumijasto oblogo, hidravlično zadnjo podporo. BPW osi, EBS, parabolično vzmetenje z izravnalno enoto, pnevmatike 235-75 R 17.5. Pokrivljena vlečna roka, premična vlečna kljuka 40+50 mm. 2-cevni zračni (duomatik) in 2-cevni hidravlični priključek, 24 voltov. Višina nakladanja praznega vozila cca. 910 mm. Barva oranžna. Tehnični pregled veljaven do 03-2027. = Dodatne informacije = Dimenzije pnevmatik: 235-75R17.5 Vzmetenje: parabolično vzmetenje Gedpfx Ajy Evvleiaouf Lastna masa: 7.300 kg Nosilnost: 22.700 kg Skupna dovoljena masa: 30.000 kg Država proizvodnje: DE Za več informacij se obrnite na Jan-Marc Schwickert.

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reversing lights (activated via reverse gear) ----General equipment: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign sets front and rear * VA plastic quarter mudguards with spray protection * HA straight galvanized steel skirts with spray protection * Reflective contour tape on sides and rear * Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low loader platform: * Forepart in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip surface on the steel plate of the turntable platform * Hardwood floor on the running surfaces of the low loader platform ----Load securing (La-Si package comprising): Gujdpfx Ajl Tlhroiajf * In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right * 4 lateral holes each in the turntable platform with 2 t lashing capacity each * 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support * 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 pockets for stanchions per side, with simultaneous 2 t lashing facility ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper) * Plank holder for extensions under the chassis on the left, longitudinally ----Excavator arm rest: * Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points each side in the excavator arm rest ----Ramps: * Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of ramps made from hardwood * Steel structure prepped for 6-section control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * 235/75 R 17.5 tires ----Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized * -- Axles, air tanks, drawbar finished in a shade of black -- ----Information: * Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish Guodpfx Aiol Tik Nsasf * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: Gsdpfx Aopk D Dqjiasuf * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 tonne Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer (pressure gauge) for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning boards, front and rear * Front axle plastic mudguards with spray protection * Rear axle straight galvanized steel side skirts with spray protection * Reflective contour tape on the sides and rear * Tool box, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running areas of the low-bed platform ----Load Securing (La-Si package consists of): * 1 x 13.4 t UVV lashing ring left & right in front of the headboard carrier * 4 fixing holes each side in the turntable platform, each with 2 t lashing capacity * 1 pair of lashing rings (13.4 t), suspended at the rear left & right in front of the rear carrier * 4 pairs of UVV lashing rings (10 t) per side, pivotable and lowerable, loadable in all directions and recessed into the external frame * 3 stake pockets per side, each offering 2 t lashing capability simultaneously ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear slope) Guodpfx Aiel Tnu Aeajf * Beam bracket for widenings under the chassis on the left, longitudinally mounted ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Ramps: * Hydraulically operated one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the ramps made from hardwood * Steel construction prepared for 6-way control valve ----Loading Height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Coating/Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and drive-on ramps hot-dip galvanized * --Axles, air tanks, drawbar painted black-- ----Infos: * Vehicle has a daily registration as of 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release system for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder * Starting aid for shunting and mandatory lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on the truck; also with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flange-mounted drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connecting cables for agricultural and forestry vehicles Gusdpjx Dp Atjfx Aiajf * Power supply for radio remote: 12+24 V via taillight ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium wheels * Split-pin towing coupling (use only with retracted underrun protection) * Enclosed plastic half-shell single mudguards * Two-step access before the front bulkhead on the left side * Shovel and broom holders in front of the front bulkhead * 2 matte stainless steel toolboxes, approx. 650 x 350 x 320 mm, mounted right side * Enclosed side protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine end from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hook system (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of hooklift via radio remote control * Remote control with rapid function when lowering, not when raising * Emergency stop switches left and right sides * Container supports with 4 lateral supports per side and one roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 x mechanical fall supports at the rear * Approval for 20 t gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the radio remote is outside the charging cradle, the service brake must be applied for radio release. Brake connections must remain connected at all times so the hydraulically/pneumatically operated valves can be opened. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and fall supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as-new condition ----Delivery time: * Vehicle is immediately available

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: Gedpfx Asy Ngzyoiasuf ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: Gusdpeykx Nksfx Aiaof * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40,0 ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za izredno sprostitev zavor za cilindere vzmetne akumulacije * Bobnaste zavore ----Osi: * 4 x 11 t Gigant osi ----Vzmetenje: * Zračno vzmetenje s sistemom za dvig in spuščanje ter ventilom RtR ----Povezava vlečne glave: * Naravna povezava vlečne glave s 50 mm vtičnico in brezstopenjsko nastavljivo višino ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikazovanja na zaslonu tovornjaka preko signala EBS - brez namestitve na tovornjaku * SmartBoard kot informacijsko orodje z senzorji tlaka za prikaz obremenitve osi na posamezni skupini osi * 15-polni električni vtič * LED zadnje luči * LED obodna svetila (odstranljiva) zadaj ----Splošni dodatni deli: * Paketi opozorilnih tablic spredaj in zadaj * 2 x orodne omare iz pocinkane in prašno lakirane jeklene pločevine, cca 650 x 300 x 600 mm, na desni strani * Spredaj zaprt plastični blažilnik * Zadaj ravne jeklene zaščitne plošče s ščitnikom proti brizganju (zmanjšanje pršenja) * Stranski zaščitni element ----Površina nizkega nakladalnika: * Podaljšana platforma z vrtljivim podvozkjem za 520 mm, z 45° koti in 3 vgrajenimi predali z pokrovi in ključavnico * Talna obloga nad platformo z vrtljivim podvozkjem iz 50 mm iglasta lesa, v platformi nizkega nakladalnika pa iz 60 mm iglasta lesa * Gumijasta obloga 20 mm namesto lesene talne obloge v območju poti, s skupno dolžino nizke platforme 6.780 mm, vključno z rampo za vožnjo Guodpjylfvmsfx Aiaof * Gumijasta obloga na rampi za vožnjo na levi in desni strani, dolžina cca 860 mm * Na vsaki strani 4 žepi za opornike (oporniki niso vključeni), skupaj z možnostjo pritrjevanja dveh ton * Okvir, izdelan iz visoko trpežnega finozrnatega jekla ----Šasi: * Šasi iz visoko trpežnega finozrnatega jekla ----Zavarovanje tovora (paket Lasi): Platforma z vrtljivim podvozkjem: * 2 para 13,4 t pritrdilnih točk v zunanjem okvirju platforme z vrtljivim podvozkjem Nizka platforma: * Na vsaki strani 4 pari 10 t pritrdilnih točk na zunanjem okvirju, z možnostjo spuščanja in obremenitve v vse smeri * Na vsaki strani zadaj 2 para 13,4 t pritrdilnih točk, ki se lahko vrtijo ----Rampe: * Gumijasta obloga na zložljivih rampah za vožnjo * Hidravlične zložljive rampe z hidravlično nastavljivim končnim delom, cca 4.650 x 720 mm * Hidravlično stransko premikanje ramp in varnostni ventili za obremenitev ----Zadnja opora: * Hidravlična zadnja opora ----Širitev: * 8 parov pocinkanih zložljivih podaljškov za 3 m skupne širine (vendar ne na zadnji rampi) * Plošče za razširitev, nameščene na levi strani v predelu za shranjevanje ----Nosilec za bager: * Nosilec za bager nad zadnjo osjo do konca rampe za vožnjo, cca D=2.100 mm x Š=740 x V=190 mm * 2 para 13,4 t pritrdilnih točk na nosilcu za bager ----Hidravlika: * Hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku, ki je večja od 40 - maks. 120 l/min) ----Dimenzije nakladalnega prostora: * zadnja nakladalna površina: cca 6.780 x 2.520 mm (vključno z 860 mm rampo za vožnjo) * nakladalna površina nad vrtljivim podvozkjem: cca 2.990 x 2.520 mm ----Višina nakladanja: * pribl. 890 mm, +/- 20 mm ----Barvanje: * Stranska in zadnja odsevna pasova * Šasi, vrtljivi podvozek, rampe za vožnjo in zložljivi podaljški, vroče pocinkani * Osi, povezava vlečne glave, zračni rezervoar in vrtljivi podvozek, pobarvani v črno barvo ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders Gusdpsx Nli Njfx Aiajf * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with driving height +30 mm via positioning cylinder * Traction aid for shunting purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additionally supplied with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Eye: * 50 mm flange screw drawbar eye – height adjustable by +77 mm and -33 mm – for 2 ton support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lamps activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Power supply for radio control 12+24V via tail light Godpfx Aox Dp Ageiaeuf ----General Attachments: * BPW landing gear at the front * Mechanical, extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Closed plastic half-shell individual mudguards * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 matt stainless steel toolboxes, approx. 650 x 350 x 320 mm, right side mounted * Closed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tractive force * Hook height 1,570 mm * Hooklift operated via radio remote control * Radio remote control with fast function during tipping, but not during winching * Emergency stop switches on both left and right sides * Container bed with 4 side supports each and one roll at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with raising the main arm * 2 x mechanical folding rear supports * Approval for 20 ton gross weight (2 x 9 ton axles) and 2 ton support load * Note: If the radio control is outside the charging cradle, the service brake must be engaged to enable remote operation. Brake connections must remain connected at all times to operate the hydraulic/pneumatic control valves. * Monitoring system for underrun protection to ensure it is retracted while tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, access steps, underrun guard, and folding supports hot-dip galvanized * Axles, air tanks, and front landing gear painted in black * Palfinger hooklift painted in black/yellow ----Information: * Subject to errors and prior sale * Vehicle in very good / like-new condition ----Delivery Time: * Vehicle immediately available

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3-in-1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Toolbox made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box made of galvanized sheet metal for container nets, approx. 960 x 300 x 400/450 mm, right side * Plastic bumper buffer at rear * Mechanical drop-down supports at rear ----Load Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Possible to transport roll-off containers with a length of 5,500–7,000 mm * Pneumatic four-point clamp locking as well as mechanical locking angles at the front in the track, securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 removable tub stops for lateral centering of the tubs; front 4 stops plugged in with pivotable stop * Weld bead as anti-slip coating in the ramp area of the run-up incline Gusdpfol Thv Rex Aiajf ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to securely fix the tubs * 4 lashing bars per side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminium drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight up to 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrical / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, possible container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for lateral centering of the skips, front 4 skip stops inserted with pendulum mount * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 lashing bars each, cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings to the front ----Ramps: * 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: Guodpel Thwcjfx Aiasf * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 Gujdpfx Aisl Tphroaef * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors Gedpoxf Skpofx Aiaouf ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: Guedpfx Aondpn Seiaef * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40,0 ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za hitro sprostitev zavore za vzmetne akumulatorske cilindre * Bobnaste zavore ----Osi: * 4 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvigalom in spuščanjem ter ventilom za ohranjanje višine ----Vlečna naprava: * Naravna vlečna naprava s 50 mm vlečno oglico in nastavljivo višino ----Elektrika / Osvetljava: * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikazovanja na zaslonu tovornjaka preko signala EBS – brez dodatne namestitve na tovornjaku * SmartBoard kot informacijsko orodje z dajalniki tlaka za prikaz obremenitve osi na vsaki skupini osi * 15-polni vtič * LED zadnje luči * LED luči za osvetlitev vseh strani (odstranljive) zadaj ----Splošni dodatni deli: * Paketi opozorilnih tabel spredaj in zadaj * 2 x orodjna omara iz pocinkane, prašno lakirane jeklene pločevine, približno 650 x 300 x 600 mm, na desni strani * Spredaj zaprt, plastičen, posamični blatnik * Zadaj naravna jeklena ščitnika za blatnike, vsak z zaščito proti brizganju (zmanjševanje brizganja) * Stranski zaščitni sistem ----Nizka platforma: * Podaljšana platforma z vrtljivo podvozi za 520 mm, z 45° koti in 3 vgrajenimi predali z pokrovi, ki se lahko zaklenejo * Talna obloga nad platformo z vrtljivo podvozi iz 50 mm, v nizki platformi pa iz 60 mm iglavca * Gumijasta obloga 20 mm namesto lesene talne obloge na območju teka, z dolžino nizke platforme 6.780 mm, vključno z rampo za vožnjo * Gumijasta obloga na rampi za vožnjo, levo in desno, dolžine približno 860 mm * Na vsaki strani 4 žepi za nosilce (vendar nosilci niso vključeni), hkrati pa omogočajo pritrditev tovora z 2 tonami * Hidravlično nastavljivi stranski raztezniki za 3 m širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu * Nosilec za roko bagra nad zadnjo osjo do konca rampe za vožnjo, približno D=2.100 mm x Š=740 x G=190 mm * 2 para pritrdilnih točk 6,4 tone, stransko v nosilcu za roko bagra ----Podvozje: * Podvozje iz visoko trdnega jekla z drobno zrnato strukturo ----Pritrditev tovora (paket Lasi): Platforma z vrtljivo podvozi: * 2 para 13,4-tonske pritrdilne točke v zunanjem okvirju platforme z vrtljivo podvozi Nizka platforma: * Na vsaki strani 4 pare 10-tonske pritrdilne točke na zunanjem okvirju, ki se lahko spustijo in so obremenljive v vse smeri * Na zadnji strani, na vsaki strani 2 para pritrdilnih točk 13,4 tone, vrtljivih ----Rampe: Guodpfx Aioylfvgjaof * Gumijasta obloga na zložljivih rampah za vožnjo * Hidravlično zložljive rampe z hidravlično nastavljivim vrhom, približno 4.650 x 720 mm * Hidravlična stranska premika rampe in ventili za zadrževanje tovora ----Zadnji opornik: * Hidravlični zadnji opornik ----Razširitev: * 8 parov pocinkanih zložljivih podaljškov za 3 metre skupne širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu ----Nosilec za roko bagra: * hidravlična enota za razdelitev pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 - največ 120 l/min) ----Mere za nakladanje: * zadnja nakladalna površina: približno 6.780 x 2.520 mm (vključno z rampo za vožnjo 860 mm) * nakladalna površina nad vrtljivim obročem: približno 2.990 x 2.520 mm ----Višina nakladanja: * približno 890 mm, +/- 20 mm ----Barvanje: * Reflektirajoči obrobni trak na straneh in zadnji strani * Podvozje, vrtljiva platforma, rampe za vožnjo in zložljivi podaljški, vroče pocinkani * Osi, vlečna naprava, zračni rezervoar in vrt

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power plug * LED tail lights 12/24 V Godpfox Hm Rcjx Aiajuf * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical foldable support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks positioned at the central locking mountings and 2 at the front bulkhead * Steel pallet - 3-way tipper body with reinforced Strong sidewalls (continuous upper sidewalls with internal tube reinforcement – without central stanchions – foldable with sidewall spring lifting device) * Screw-fixed rear stanchions * Combination steel wing doors at rear, 2-leaf, asymmetrically split, can be swung and locked up to 270° (not foldable), with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rod lock at rear and central lock; deactivation function for automatic tailgate opening during rear tipping with opened wing door * 4 mm fine-grained steel floor plate ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings recessed in the outer frame on each side ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting track for deployable ramps * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps integrated below the loading area in the chassis at the rear ----Tyres: * Tyre size 358/55 R 19.5 ----Painting: * Drawbar, underride guard, rear stanchion, and rear foldable support legs hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black shade * Sidewalls painted in RAL colour of choice (no special or metallic paint) – can be modified up to approx. 6 weeks before completion ----Other Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery Time: * Immediately available from calendar week 29/2026