Demmler Prikolica Z Nizko Platformo nakup rabljenega (31.234)

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300 - Turntable with robust ball bearing ring - Rear supports, foldable - 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit - 1 spare wheel, same brand and type as main tyres, steel rim - 1 plastic toolbox - Extendable load width up to 3,000 mm (not in rear slope) - Storage compartment for timber planks in the centre of the low-bed platform - Timber planks, 70 mm, for widening to 3,000 mm Tie-down points on low-bed: - with spring-loaded lifting aid Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Braking system: - Dual-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 Volt, multi-chamber lights, yellow LED side lights - 1 LED beacon with mounting bracket, controlled via parking light (removable beacon) - 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor: - Storage box recessed into drive-up angle at the drop bed - Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area - Rear slope with 70 mm softwood floor Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood Gbsdpstcwkrofx Acgsl - 1 pair of ring lashing eyes recessed front in drop bed, 10 t - 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks - 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed) - 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost) - 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Gbedpfxeyxh Rzj Acgsl

Stanje: novo, največja dovoljena obremenitev: 14.830 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 6 m³, skupna širina: 2.550 mm, skupna višina: 3.145 mm, Leto izdelave: 2026, Oprema: ABS, Loading area 6,300 mm, 5,300 mm straight low-bed and 1,000 mm rear incline, aluminum side walls 400 mm, foldable, removable, split in the middle with Kinnegrip, height-adjustable drawbar 850 mm infinitely variable +/- 150 mm, towing eyes DIN 50, one-piece ramps approx. 2,500 x 500 mm with perforated sheet surface, 15-21 lashing rings per side, each with 2t towing capacity, 2 pairs of lashing boxes front and rear each with 10t lashing capacity, 5-7 pairs of recessed lashing brackets in the outer frame, depending on load length, each with 2t lashing capacity, aluminum side walls arctic white, chassis nova gray, zinc dust paint coating, air connectors yellow/red, electrical connection 2x7 pin, foldable rear supports, ABS, EBS, "Gigant" axle(s), drum brake system, vehicle may be stickered and/or labeled with advertising. SI86656 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. Gjdpfx Acoyi N Rcjgebl We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Stanje: rabljeno, največja dovoljena obremenitev: 46.600 kg, skupna masa: 60.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1990, dolžina tovornega prostora: 10.430 mm, širina tovornega prostora: 2.750 mm, skupna širina: 2.750 mm, skupna višina: 3.700 mm, Ladebett: 8200 mm, razširljivo na približno 3250 mm, zložljive razširitve, višina nalagalnega ležišča: približno 980 mm, zgornje ležišče 1470 mm, zadnji naklon: 760 mm, 4 x točke za pritrditev težkega tovora na vsaki strani, hidravlična nakladalna rampa (DxŠ) 2700x1000, hidravlična zadnja podpora, vlečna kljuka 50 mm, nosilec za rotacijsko luč na zadnjem delu, BPW os(i), 3. in 6. os vodeni kot sledenje, bobnaste zavore, listnato vzmetenje, vozilo je lahko polepljeno z oglaševanjem in/ali opremljeno z napisi. SI86359 Naša ponudba je praviloma brez nove tehnične pregledne (TÜV) potrditve. Če želite novo TÜV potrditev, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko polepljeno z oglaševanjem in/ali opremljeno z napisi. Veljajo naši splošni pogoji dobave in plačila. Gbedexyncdjpfx Acgjl Z veseljem vam pripravimo ponudbo financiranja ali leasinga za ta objekt. Kontaktirajte nas!

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.940 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235/75R17,5, barva: drugo, Leto izdelave: 2026, 4-osna nizkopodna prikolica, vroče cinkana, razširljiva na 3000 mm. Jeklene rampe dolžine 3000 mm, širine 750 mm, hidravlično upravljanje s hidravličnim bočnim pomikom. Jama za rovokopačev izpust dolžine 1800 mm, širine cca 650 mm in globine 150 mm. Dno iz mehkega lesa debeline 70 mm. Gbedpfxoyxft To Acgel Vozilo na zalogi.

Stanje: rabljeno, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/1969, Vehicle identification number: 1837 Unladen weight: 11,100 kg German inspection (HU): due BPW axles with drum brakes Leaf suspension Total length with drawbar: 12,950 mm High-bed length: 2,750 mm Low-bed length: 7,100 mm (600 mm tapered) Width: 2,795 mm – Loading height: 970 mm Swivel drawbar eye – 40/50 mm Gbedpfx Aoy A Ar Ujcgol Hydraulic ramps, split – length 2,500 + 1,700 mm – width 800 mm Support legs Tyres: 1st axle: 10.00 R 20 2nd–3rd axle: 8.25 R 15 Modifications, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of commercial law. The description according to the purchase contract is decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops! The vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 21.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2017, dolžina tovornega prostora: 7.700 mm, širina tovornega prostora: 2.540 mm, Oprema: ABS, Vehicle Identification No.: W09000330G0Z14099 WITH ELECTRO-HYDRAULICS – NATO SOCKET Unladen weight: 8,300 kg German roadworthiness inspection (HU) valid until 08/2026 – Safety inspection (SP) due Total length: 10,050 mm – Bent drawbar – 50 mm Platform length: 7,700 mm – Width: 2,540 mm – Loading height: 880 mm Hydraulic ramps – 2,740 x 720 mm Extendable with extension lights and timber supports GIGANT axles with drum brakes Technical axle loads: 3 x 10,000 kg Gedpoyqcb Defx Acgsbl Air-suspended, Wabco Smart Control Stake pockets, incl. stakes 2 x toolboxes 2 x steel boxes Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Specifications, prior sale, and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sale of goods. The contract description is binding. Our offer generally does not include a new roadworthiness inspection (TÜV). Should you require a new TÜV inspection, we will gladly provide an offer from our partner workshops! Vehicle may have advertising stickers and/or inscriptions. Our general terms and conditions of delivery and payment apply.

Stanje: novo, največja dovoljena obremenitev: 9.100 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, skupna širina: 2.550 mm, skupna višina: 3.260 mm, Leto izdelave: 2026, Oprema: ABS, Humbaur HBT 106224 BS Heavy-Duty Low Loader Tandem Flatbed Trailer Standing Planks New Vehicle Overall Dimensions (mm): 8400 x 2550 x 3260 Internal Dimensions (mm): 6200 x 2450 x 400 Loading Height: 920 mm Gross Vehicle Weight: 11,900 kg Unladen Weight: 2,800 kg Payload: 9,100 kg Tyres (inch): 235/75 R 17.5 Ramps (mm): 2600 x 540 Beacon at Ramp (optional) Gbedpfx Aswfmgbecgel Reversing Lights (optional) 2x Toolboxes CHASSIS: - Axles from renowned manufacturers - Maintenance-free parabolic suspension with load equalisation - Tyres according to manufacturer selection - Tyre Pressure Monitoring System (TPMS) including auto-locate BRAKING SYSTEM: - EBS braking system according to ECE regulations - 2 non-interchangeable coupling heads red/yellow ISO 1728 - Spring-loaded parking brake ELECTRICS: - 24-volt lighting system with LED multi-chamber rear lights and flashing LED side marker lights - 15-pin connector for lighting DRAWBAR: - Galvanised drawbar with bolted towing eye Ø 40 mm - Coupling height steplessly adjustable via crank CHASSIS FRAME: - Heavy-duty, welded, hot-dip galvanised chassis frame - Loading area rear section chamfered - Floor covering: 40 mm softwood planks, painted/impregnated BODY: - Aluminium sidewalls, anodised, 400 mm high, fold-down and removable on sides - Corner posts galvanised, plug-in at front and rear LOAD SECURING: - 7 pairs of 2t lashing points on outer frame - 3 pairs of 6t recessed lashing points in deck SUPPORT SYSTEM: - Reinforced 12t gearbox support winch with load and quick mode - 2 telescopic folding supports at rear left/right RAMPS: - 2 foldable one-piece steel ramps, galvanised, laterally adjustable - Ramp lifter (1 gas strut per ramp) - Ramp safety on rear corner posts - Ramps with grating surface EQUIPMENT: - Galvanised steel mudguards with anti-spray system - Side underrun protection up to first axle, foldable - Contour marking on side and rear - 2 wheel chocks with holder, space for double-line number plate ATTENTION!!!! PLEASE READ!!!! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend viewing and inspection so that there are no misunderstandings regarding condition and suitability. Viewings and inspections are possible anytime by appointment and are expressly encouraged! Images similar, may contain optional extras subject to surcharge. Internal dimensions are approximate values. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE AND BALANCE PAYMENT POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 to 17:00, Saturday 8:30 to 14:00 Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2022, Leto izdelave: 2022, Alga TAT B-180, 7,3 m, rampe, dozvoljena ukupna masa 19 t, niskopodni prikolica, Tiefgänger, 1. vlasnik, dobro održavano vozilo. Tehnički opis: Gbjdpfxjy Ifyle Acgjl Šasija / Ovjes / Broj osovina: ABS, EBS. Utovarni prostor 7.300 mm, niskopodni dio 6.300 mm, zadnji kosina: 1.000 mm. Bočne stranice aluminijumske, visina 400 mm, mogu se preklopiti, ukloniti, djeljive po sredini (Kinnegrip). 8 veznih ušica po strani, svaka s vučnom snagom do 2t. 2 para sanduka za vezivanje naprijed i nazad, svaki kapaciteta 10t. Vučna rudica podesiva po visini / beskonačno, ±150 mm, vučna kuka 50 mm. Rampa u jednom komadu približno 2.500 mm x 500 mm, potpuno skupljiva. 2 preklopne zadnje potpore. EBS i ABS, “GIGANT” osovine, bubanj kočnice, lisnato ogibljenje. Bivša neto cijena novog: 32.700,- € Unatoč najvećoj pažnji moguća je greška u oglasu. Zadržavamo pravo na izmjene i prethodnu prodaju!

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white Gjdpfx Acsrwc R Aegsbl * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: dober (rabljeno), Leto izdelave: 2009, Proizvajalec: Schwarzmüller Gedoyyyfmspfx Acgebl Tip: G404, 4-osni Leto izdelave: 2009 Dolžina nakladalne površine: 9 m Lastna teža: 8.600 kg Dovoljena skupna masa: 24.000 kg Skupna masa v naloženem stanju: 45.200 kg Nosilnost: 15.400 kg

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronski kočioni sistem) * RDÜ (nadzor pritiska u pneumaticima) * Bubanj kočnice, 2 x 5,5 t Gigant osovine * Parabolične opruge sa balans agregatom * Vučna ruda podesiva po visini oko 300 mm * BPW oslonac (nožna dizalica) * Mehaničke zadnje potpornice * Plastična kutija za alat napred desno uz čeonu stenu * Bočna zaštita od podlijetanja * LED osvetljenje * Pod od mekog drveta (nordijska jela) debljine 50 mm * U uglovima ispred čeone stene i zadnjeg nosača po 1 x 6,3 t anker, kao i sa svake strane po 2 UVV ankerska prstena od 6,3 t ugrađena u spoljašnji ram * Jednodelne mehaničke rampe od rešetkastog metala sa oprugom za upravljanje jednom osobom, dimenzija cca 2.350 x 870 mm (unutrašnje rastojanje 20 mm, rampe nisu pomične) Gbsdjwyhzvspfx Acgsl * Čeona stena, bočne stranice, blatobrani i vučna ruda toplo pocinkovani * Osovine, opruge, vazdušni rezervoar, prednji oslonac lakirani u crnoj boji * Novo vozilo sa punom fabričkom garancijom * Zadržavamo pravo na greške i međuprodaju * Dostupno od približno 35. nedelje 2026.

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized steel sheet, mounted on the right side * Plastic quarter mudguards * Two-step entry on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights ----Tipper Platform: * Steel pallet three-way tipping body * Continuous side walls at the top with internal tube reinforcement (without central stanchions), foldable using drop side spring lifters * Rear wall foldable and pendulum-mounted, with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Mesh hooks, rear mounting rail for drive-on ramps * Prepared for later retrofitting with side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load Securing: * Each corner with 1 x 5 t lashing ring and each side with 4 x 3 t lashing rings embedded in the outer frame ----Aluminum Drive-on Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform integrated in the chassis, accessible from the rear ----Tires: * 385/55 R 22.5 tires ----Painting / Coating: * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Sidewall finish in RAL 9010 pure white * Side wall painting in other RAL colors available at extra cost ----Info: Godpfx Asl Th A Eocgjbl * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 29/2026

Stanje: novo, največja dovoljena obremenitev: 2.705 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.660 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 270 mm, skupna širina: 2.300 mm, Leto izdelave: 2026, The Ifor Williams GX126 with ramp is an exceptionally robust and versatile plant trailer, ideally suited for transporting excavators, wheel loaders, and other machinery. At our location in Mainaschaff near Aschaffenburg, we offer you this model with the following features: Features: * Full-width, gas spring-assisted ramp for comfortable and safe loading, even of heavy machines. * Galvanized steel frame for maximum stability and durability. * Phenolic-coated plywood floor for high load capacity and long service life. * Spare wheel with bracket and heavy-duty jockey wheel as standard. * Bucket rest for excavator buckets and accessories. * Multiple lashing points for optimal load securing (optional). Optional equipment: Aluminum floor, ladder rack, mesh extension (only with ramp), longer ramp (1.8 m instead of 1.2 m), toolbox, and additional accessories. Special features: The ramp is supported by gas struts, significantly easing handling even with heavy machines. The GX series can be individually equipped with numerous extras to tailor the trailer precisely to your requirements. Our services for you: - TÜV/inspection - Attractive financing - Large spare parts warehouse - Registration service - Workshop service Location: Visit us in Mainaschaff, just 30 minutes by car from Frankfurt am Main — directly off the A3. Our experienced team will be happy to offer you personal and individual advice. Godpfsy E A Inox Acgjbl

Stanje: rabljeno, lastna masa: 1.300 kg, največja dovoljena obremenitev: 2.700 kg, skupna masa: 4.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/1978, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 2.350 mm, skupna širina: 2.700 mm, vzmetenje: jeklo, velikost pnevmatike: 7.00 R 16, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Location of vehicle: Bovenden, 2 axles, tandem, leaf suspension, mechanical ramps Gjdpoi Rnllofx Acgebl Body: mechanical ramps, wooden floor, ramps: 1800 x 500 mm, Was reconditioned for EUR 1,500 including paint! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders Gedpfx Aox Ipbgjcgjbl * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering device * Tow bar height-adjustable by approx. 300 mm * Tow bar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * 15-pin electrical connector * LED lighting * Front landing gear * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right exterior bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions for subsequent installation of 20" container locks in front of the bulkhead and at rear * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profile steel sheet, center-folding, divided once * Rear steel panel insertable between ramp mounts; storage inside at bulkhead when not in use * Bolted rear stanchions * Perforated outer frame approx. 45° angled, lashing points (2 t lashing capacity) every 480 mm * Optional installation of 3 t drop lashing brackets every 600 mm – four lashing rings installed per side * One 6.3 t lashing ring in each front and rear corner * Profifix lashing rail along the longitudinal axis center, for lashing capacity up to LC 3000 daN * Various holes in front and rear crossmember for 1.2 t lashing options Godpol Thvxefx Acgebl * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear driving slope approx. 860 mm * Chassis, tow bar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, drawbar eye, and landing gear painted black * Side wall paint in desired RAL color shade (no special or metallic finishes), modifiable up to about 6 weeks before completion * -- Reinforced and certified bodywork according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 31/2026

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: Godpfx Acjylfvgsgebl * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck display via EBS signal – no truck-side installation required * SmartBoard infotool with pressure sensors for axle load display by axle group * 15-pin power connector * LED taillights * Removable rear LED rotating beacon ----General Attachments: * Warning sign package front & rear * 2 x toolboxes made of galvanized (powder-coated) sheet steel, approx. 650 x 300 x 600 mm, mounted right-hand side * Closed single plastic fender at the front * Straight rear steel mudguards with spray protection (anti-spray mist) * Side underrun protection ----Low Loader Deck: * Turntable platform extension by 520 mm with 45° corners and 3 recessed storage compartments including lockable lids * Floor over turntable platform made of 50 mm and on the low loader platform of 60 mm softwood * 20 mm rubber flooring in the running area instead of wooden floor, with a recessed bed length of 6,780 mm including the ramp slope * Rubber flooring on ramp slope left and right, approx. 860 mm long * Four stake pockets per side (stakes not included), each with 2 t lashing capability ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Turntable Platform: * 2 pairs of 13.4 t lashing rings on the outer frame of the turntable platform Recessed Bed: * Four pairs of 10 t folding and multi-directional lashing rings per side on the outer frame * Two pairs of 13.4 t swivel lashing rings each at the rear left and right ----Ramps: * Rubber covering on foldable ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m total width (not at the rear slope) * Widening planks stored in a side compartment on the left ----Dipper Stick Rest: * Dipper stick rest over rear axle to end of ramp slope, approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings on the sides of the dipper stick rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output from the truck over 40 – max. 120 l/min) ----Loading Dimensions: * Rear cargo area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Area above turntable: approx. 2,990 x 2,520 mm ----Loading Height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape on sides and rear * Chassis, turntable, ramps, and outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may include special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power plug * LED lighting ----General Fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation before the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Bolted bulkhead made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, folding design, divided centrally * Steel rear wall, can be inserted between the ramp brackets, stowed inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Slotted outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t folding lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing point * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember * Profifix lashing rail along the centerline for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid approach ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach slope approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, rear panel, folding supports, and approach ramps hot-dip galvanized * Axles, springs, air tank, flange drawbar eye, and support winch painted in black * Side wall paint in a RAL color of your choice (special or metallic paints not available), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified construction according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted Gbsdpfx Asv D Tcbscgel ----Delivery Time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1: Suitable for swap containers (Abrollbehälter) and as low-loader trailer ----Braking System: * EBS electronic braking system * Emergency release facility for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lift and lower system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * Tire pressure monitoring system, display option in truck via EBS signal (no truck-side installation required) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box, powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic buffer bumper * Foldable 'A' sign at the rear ----Loading Platform: * Main frame with raised outer frame to guide swap containers * Steel sheet floor with recesses for rollers in the bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point clamping lock and mechanical plug-in stops in the running channel at the front, securing certificate according to DIN 30722-1 * Weld bead as anti-slip covering in the inclined running area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs 10 t UVV lashing rings on each side of the outer frame * Each side with 4 x 2 t cloverleaf lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking elements, rear drop-supports hot-dip galvanized * Drawbar, axles, and air tanks painted in a black shade ----Additional Info: * New vehicle, no initial registration, full manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available approx. from KW 43 / 2026 Gbedpfxjl Tq Nmj Acgol

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * 3-in-1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Toolbox made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box made of galvanized sheet metal for container nets, approx. 960 x 300 x 400/450 mm, right side * Plastic bumper buffer at rear * Mechanical drop-down supports at rear Godpfsl Thv Rex Acgebl ----Load Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Possible to transport roll-off containers with a length of 5,500–7,000 mm * Pneumatic four-point clamp locking as well as mechanical locking angles at the front in the track, securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 removable tub stops for lateral centering of the tubs; front 4 stops plugged in with pivotable stop * Weld bead as anti-slip coating in the ramp area of the run-up incline ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to securely fix the tubs * 4 lashing bars per side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminium drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight up to 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Lifting middle axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: Gedpfxotplv Te Acgobl * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumpers * Mechanical rear drop-down supports ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point container clamp locking as well as mechanically plug-in front stop angles in the guide tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with pendulum stoppers ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive load securing of skips * 4 lashing rails in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp incline running area * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at rear chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with spray protection Gbodpfx Acol Tq Euogsl * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) toolbox lid on bogie platform * LED tail lights * Removable rear amber beacon * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four side stake pockets each with integrated 2 t lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of bogie platform, 5 pairs of UVV-compliant swivel and lowerable lashing rings loadable in all directions and embedded in external frame – at corners up to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in rear tapered section) * Widening planks stored in center of loading area * Hydraulic single-section loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Digger arm rest above rear axle up to crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on side of digger arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, bogie, drawbar, folding wideners & loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. calendar week 32 / 2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection Gedpol Th Adofx Acgebl * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin supplementary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access ladder, front left in direction of travel Gbodpsl Thw Isfx Acgjl * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 pieces at the front wall * Steel pallet—3-way tipper body (continuous side panels—no centre stanchions—fold-down with side panel spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side in the outer frame ----Ramps: * 1 pair of aluminium ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment beneath the loading area integrated into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paint: * Chassis, drawbar, tipper body, front wall, folding supports, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Sideboard paintwork in preferred RAL colour shade (excluding special or metallic paints), changeable up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted * Sample images ----Delivery Time: * available from approx. week 28 / 2026