Other Nizki Nakladalnik nakup rabljenega (13.983)

Stanje: novo, številka stroja/vozila: f79a9f15e7131d57a512793ab, lastna masa: 8.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminium Rear spray guards across the full width Quarter fender before 1st axle Extendable outriggers up to 3,000 mm (not in the rear slope area) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Lashing points Low-bed 1 pair of lashing rings on gooseneck, each rated at 5 t 9 pairs of lashing mushrooms, flush-mounted on the top and side in the outer frame, each rated at 10 t 2 x front on gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated at 5 t (for attaching tie-down straps) Drawbar System Turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mount and mechanical axle load compensation (rocker balance) front and rear Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System Klodpji Ri Izsfx Aicsu 2-line air brake system Spring-loaded parking brake 2 swap-proof coupling heads at the front with connection lines to towing vehicle ABS and ALS, with ABS connector at the front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with holder, switchable by parking light (removable) 2 pairs of warning boards, double LED illuminated and extendable up to 3,000 mm 2 x 7-pin swap-proof plugs at the front, with connecting cable Floor Gooseneck at front with steel/chequer plate covering Thereafter 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood plated Hydraulic activation via auxiliary drive on tractor unit with throttle, operation on front left side Hydraulic connection with SVK connector NW 10/3, including connection hose Operating Instructions A special permit is required for an axle load of 10,000 kg; only indivisible loads possible!!! The specified gross weight is technically possible; depending on the freight, the permissible gross weight may not be achieved while respecting axle, support and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Included Prepared for double-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova Grey 10-year warranty against rust-through Drawbar galvanised or black, at manufacturer’s choice Access ramps hot-dip galvanised

Stanje: rabljeno, številka stroja/vozila: XNTSXD3500007xxxx, Leto izdelave: 2012, Prosimo, navedite referenčno številko ob povpraševanju: 23655 Specifikacije: EU-homologacija do 26.09.2026 Letnik 2012 Zračno vzmetenje Pnevmatike (glejte slike) Dolžina odprtine: pribl. 383 cm Omarica za orodje Dolžina: 1375 cm Širina: 254 cm Medosna razdalja: 131/220 cm Lastna teža: 10.720 kg Največja nosilnost: 39.280 kg Kodpozdpbpjfx Aicelu Opis: Pacton Br nnprikolica iz leta 2012. Homologirana v EU do 26. septembra 2026. Možna hitra dobava. Tuf: Da EU odobreno do: 26.09.2026 Lastna teža: 10720 Nosilnost: 39280 Širina: 254 Dolžina: 1375 Model: SDX350 Brønnhenger = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, Leto izdelave: 2019, Oprema: ABS, Lastna teža: 9.480 kg Kledpfx Aijyzkn Ijcsu Nosilnost: 25.520 kg Dovoljena skupna masa (zGG): 35.000 kg

Stanje: rabljeno, Leto izdelave: 2018, Oprema: ABS, Lastna teža: 9.480 kg Kedpfxeyzknue Aicslu Nosilnost: 25.520 kg Dovoljena skupna masa (zGG): 35.000 kg

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 06/1990, Leto izdelave: 1990, Oprema: ABS, = Additional Options and Accessories = - Twin tires = Notes = Langendorf Low Loader 2-axle Langendorf Low Loader 2-axle Air suspension Forced steering Unladen weight 9,500 kg, payload 24,500 kg, gross weight 35,000 kg Front platform 3.3 m long, low-bed 5 m long, rear platform 5 m long ID No. 711 Steering axle We gladly welcome you for advice, contract signing or vehicle pickup at our dealership. Please schedule an appointment. If you’re unable to visit our dealership in person, we offer full processing via phone/email/WhatsApp/fax. Upon request, we can deliver your new vehicle directly to your door. This ensures you get the best price, maximum security, and convenience when purchasing a vehicle. Trade-in We are happy to accept your used car as a trade-in. We offer digital vehicle appraisal based on your photos, so no dealership visit is necessary. Our specialized purchasing team offers you a guaranteed top price. Upon request, we will deliver your new “used” vehicle anywhere in Germany directly to your door and take your old vehicle back. Financing - Leasing Immediate approval and old loan settlement available. Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Area) Visit our website at Klodpfxoxt S Epe Aicou Over 400 vehicles in stock at all times. The information provided in ads, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typos and data transmission errors. Listed equipment should be checked separately if necessary. Offers are generally made without a new TÜV inspection; we are happy to provide an offer from our partner workshop. Subject to error and prior sale. = Further Information = Unladen weight: 10,500 kg Payload: 24,500 kg gross weight: 35,000 kg Sales price: €11,999, US$13,980

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/1992, vzmetenje: zrak, velikost pnevmatike: 9.5R17.5, barva: rdeča, Leto izdelave: 1992, Self-tracking axle / trailing steering axle. Extendable. Loading bed length: 930 cm x 253 cm Loading height: 90 cm. Extendable. = Further Information = Axle configuration Tyre size: 9.5R17.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: twin tyres; left inner tread: 30%; left outer tread: 30%; right inner tread: 30%; right outer tread: 30% Rear axle 2: twin tyres; left inner tread: 30%; left outer tread: 30%; right inner tread: 30%; right outer tread: 30% Rear axle 3: twin tyres; steered; left inner tread: 30%; left outer tread: 30%; right inner tread: 30%; right outer tread: 30% Weights Curb weight: 9,985 kg Payload: 35,015 kg Gross vehicle weight (GVW): 45,000 kg Maintenance APK (periodic technical inspection): valid until 11/2026 Identification Type number: SD 31 / SEMI TRAILER / EXTENDABLE Kjdey N S Rmepfx Aicjlu = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We do our best to provide correct information, but no rights can be derived from the texts provided.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 17.840 mm, širina tovornega prostora: 1.750 mm, velikost pnevmatike: 9.50R17,5, medosna razdalja: 1.350 mm, barva: modra, Leto izdelave: 1992, Color: Blue Payload: 43,600 kg Extendable Manufacturer: Goldhofer Model: STZ-VL4-44-80 Extendable Low Loader Chassis Number: WG0STZV47N0020238 Year of Manufacture: 1992 Weights: Fifth-Wheel Load: 24,000 kg Axle Load: 10,000 kg Total Axle Load: 40,000 kg Gross Vehicle Weight (GVW): 64,000 kg Unladen Weight: 20,400 kg Payload Capacity: 43,600 kg Axles: Axle Brand: BPW Air Suspension All axles with hydraulic steering High-Low Valve ABS Brake System Tyres: 9.50R17.5, dual fitment Load Index: 143/141 J Dimensions: Length: 17,840 mm Extensions: 4,000 mm Max. Extended Length: 21,840 mm Loading Platform Length: 8,000 mm – 12,000 mm Loading Platform Width: 2,750 mm Height: 600 (+/-100) mm Fifth-Wheel Height: 1,300 mm Additional Information: Hydraulic connection for truck-side hydraulic functions Lashing rings 2x spare wheels Detachable gooseneck Hydraulically operated gooseneck Work lights Rear bumper with lights Fifth-wheel coupling 3.5” Schübler central lubrication system Outriggers for platform widening Fixed ramps on loading platform High-Low Valve = Further Information = General Information Year of Manufacture: 1992 Axle Configuration Tyre Size: 9.50R17.5 Axle Brand: BPW Rear axle 1: Dual wheels; Max. axle load: 10,000 kg; Steered Kodpfx Aijuu Hbhocslu Rear axle 2: Dual wheels; Max. axle load: 10,000 kg; Steered Rear axle 3: Dual wheels; Max. axle load: 10,000 kg; Steered Rear axle 4: Dual wheels; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 20,400 kg Payload: 43,600 kg Gross vehicle weight: 64,000 kg Functional Extendable chassis: Yes Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Price: On request

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2007, skupna dolžina: 13.400 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, medosna razdalja: 9.800 mm, barva: bela, Leto izdelave: 2007, Oprema: ABS, SAF axle. 2 x steered trailing axles. Extendable. Lifting roof. Sliding roof. Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration Tire size: 205/65R17.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 2: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 3: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 4: twin tires; tire tread left inner: 40%; tire tread left outer: 40%; tire tread right inner: 40%; tire tread right outer: 40% Weights Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight: 47,600 kg Identification Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = Ksdpey N Aw Refx Aicolu ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We do our best to provide accurate information, but no rights can be derived from the published texts.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, velikost pnevmatike: 245/70R17,5, barva: zelen, Leto izdelave: 2015, Doll T3E-S3F/28 Year of manufacture: 2015 12 ton BPW Panther axles Kedpsy I Rltjfx Aicjlu Gross vehicle weight: 64,000 kg Kingpin load: 28,000 kg 6 meters extendable Alcoa wheels Hydraulic suspension Hot-dip galvanized chassis Spare tyre Radio remote control 4 removable floor panels Hydraulically detachable gooseneck Aluminium side boards and toolbox on the gooseneck Hydraulics compatible for NATO Dimensions: Neck: L: 3,500 mm W: 2,500 mm H: 1,500 mm Kingpin height: 1,200 mm Loading platform: L: 8,300 mm W: 2,750 mm H: 400 mm Floor thickness: 220 mm Rear section trailer: L: 4,150 mm W: 2,750 mm H: 950 mm Tyres: 245/70R17.5, tread depth 80% 2 units available! German trailer ID No: 680 The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations from Heinhuis, as well as to all contracts entered into by Heinhuis, including any preliminary negotiations. By responding in any form, you accept the applicability of Heinhuis's General Terms and Conditions and confirm that you have taken note of these terms. Our prices are net export prices. = Further information = General Information Year of construction: 2015 Axle configuration Tyre size: 245/70R17.5 Axle manufacturer: BPW Rear axle 1: Twin tyres, alloy rims, max. axle load: 12,000 kg, steering axle, tyre tread left inside: 80%, left outside: 80%, right inside: 80%, right outside: 80% Rear axle 2: Twin tyres, alloy rims, max. axle load: 12,000 kg, steering axle, tyre tread left inside: 80%, left outside: 80%, right inside: 80%, right outside: 80% Rear axle 3: Twin tyres, alloy rims, max. axle load: 12,000 kg, steering axle, tyre tread left inside: 80%, left outside: 80%, right inside: 80%, right outside: 80% Weights Gross vehicle weight: 64,000 kg Condition Technical condition: Good Visual condition: Good Financial information Price: On request = Company information = For more information: WhatsApp:

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/1997, vzmetenje: hidravlika, velikost pnevmatike: 245/70R17.5, medosna razdalja: 10.670 mm, barva: rdeča, Leto izdelave: 1997, Oprema: ABS, Nooteboom MCO 58-04V 4 x gelenkte Achsen. 2 x ausziehbar: 1340 cm. BPW Achsen. Abstand Königszapfen bis zum Ende des Trailers: 1200 - 2540 cm. = Further information = Axle configuration Ksdpew Dtlhjfx Aicslu Tyre size: 245/70R17.5 Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tyres; Steering; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tyres; Steering; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Rear axle 3: Twin tyres; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Rear axle 4: Twin tyres; Steering; Tyre tread left inner: 20%; Tyre tread left outer: 20%; Tyre tread right inner: 20%; Tyre tread right outer: 20% Weights Unladen weight: 15,980 kg Payload: 38,020 kg Gross vehicle weight: 54,000 kg Identification Type number: MCO-58-04V / 2 x EXTENDABLE / ST = Company information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Russian spoken. We strive to provide accurate information, but no rights can be derived from the listed texts.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2009, skupna dolžina: 13.220 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, medosna razdalja: 6.830 mm, barva: modra, Leto izdelave: 2009, Oprema: ABS, Overall length: 1,322 cm Extendable: 700 cm Kledsy Nxwaspfx Aicou Total bed length: 16,300 cm Width: 255 cm Loading height: 80 cm (loaded) = More information = Axle configuration Brakes: drum brakes Suspension: air suspension Rear axle 1: Tire size: 205/65R17.5; twin tires; steered; tire tread left inner: 60%; tire tread left outer: 60%; tire tread right inner: 60%; tire tread right outer: 60% Rear axle 2: Tire size: 205/65R17.5; twin tires; steered; tire tread left inner: 60%; tire tread left outer: 60%; tire tread right inner: 60%; tire tread right outer: 60% Rear axle 3: Tire size: 205/65R17.5; twin tires; steered; tire tread left inner: 40%; tire tread left outer: 40%; tire tread right inner: 40%; tire tread right outer: 40% Rear axle 4: twin tires; steered; tire tread left inner: 40%; tire tread left outer: 40%; tire tread right inner: 40%; tire tread right outer: 20% Weights Unladen weight: 13,750 kg Payload: 35,850 kg Gross vehicle weight: 49,600 kg Identification Type number: STZ-L4-34/80 A / 4 x STEERING AX = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide correct information, however, no rights can be derived from the listed texts.

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2009, Faymonville STBZ-3VA. Baujahr: 2009. 10-t-SAF-Achsen. Eigengewicht: 16.000 - 16.500 kg. Zulässiges Gesamtgewicht: 60.000 kg. Sattellast: 30.000 kg. Hydraulik kompatibel mit NATO. Allu-Bordwände + Werkzeugkasten auf dem Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. 6 m ausziehbar. Kodpfx Aioy I Av Decslu 2 x 25 cm verbreiterbar. Luftfederung. Baggerbrücke: 4300 x 950 mm. Verzinkt. Abmessungen: Schwanenhals: L: 4500 mm B: 2500 mm H: 1850 mm Sattelkupplungshöhe: 1300 mm Ladefläche: L: 8000 mm B: 2750 mm H: 500 mm Bodenstärke: 300 mm Heck Auflieger: L: 4300 mm B: 2750 mm H: 950 mm Bereifung: 235/75R17,5, 80% Profil Dolly D-1. Baujahr: 2008. Erstzulassung: 2009. 10-t-BPW-Achse. Eigengewicht: 2400-2600 kg. Zulässiges Gesamtgewicht: 28.000 kg. Sattellast: 18.000 kg. Bereifung: 235/75R17,5, 80% Profil. Deutscher Auflieger! 2 Stück verfügbar! ID NR: 632. Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für sämtliche Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, für alle von Heinhuis geschlossenen Verträge sowie für die diesen vorausgehenden Verhandlungen. Durch jegliche Form der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2009 Leergewicht: 16.000 kg Zuladung: 44.000 kg zul. Gesamtgewicht: 60.000 kg ausziehbarer Aufbau: Ja Preis: auf Anfrage = Firmeninformationen = Für mehr Informationen: WhatsApp:

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, prva registracija: 03/2015, dolžina tovornega prostora: 134.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 480 mm, vzmetenje: hidravlika, Leto izdelave: 2015, Oprema: ABS, = Dodatne možnosti in oprema = - Centralno mazanje = Dodatne informacije = Konfiguracija osi Vzmetenje: hidravlično vzmetenje Zadnja os 1: Max. obremenitev osi: 12.000 kg; Krmiljena Zadnja os 2: Max. obremenitev osi: 12.000 kg; Krmiljena Kedpjvtc Aiofx Aicslu Teže Lastna teža: 12.660 kg Nosilnost: 34.340 kg Skupna dovoljena masa: 47.000 kg Funkcionalno Višina nakladalne površine: 48 cm Izvlečna nadgradnja: Da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: Po dogovoru Dodatne informacije Za več informacij se obrnite na Davida F Middelmana.

Stanje: novo, konfiguracija osi: 2 osi, Leto izdelave: 2023, Brian James General Plant (3.500 kg), novo vozilo brez prve registracije, prekucna tovorna površina, popolno za škarjaste dvižne mize in skladiščno tehniko, letnik: 2023, mere tovorne površine: 3,10 m x 1,70 m, dovoljena skupna masa: 3.500 kg, nosilnost: 2.790 kg, perforirana jeklena nakladalna rampa, rezervno kolo, takoj na voljo. Cena: 6.590,00 € neto / 7.842,10 € bruto Na željo pripravimo leasing ali finančno ponudbo. Gospod Ebert (tel.) vam je z veseljem na voljo. Več informacij najdete na naši spletni strani. Pridržujemo si pravico do napak in vmesne prodaje! = Dodatne informacije = Kjdoyfra Sopfx Aicjlu dovoljena skupna masa: 3.500 kg Za več informacij se obrnite na Tobiase Eberta.

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 245-70R17.5, Leto izdelave: 2014, 4-achs Tiefladeanhänger, von hinten überfahrbar. Zul. Gesamtgewicht 40.000 kg, Nutzlast 30.400 kg. Ladefläche ca. 9.850 mm (ca. 2.350+7.500 mm) x 2.550 mm, Laufflächen mit Gummibelag, klappbare Verbreiterungen auf 3.000 mm, Warntafeln, Rundumkennlicht, Baggerstielablage, 24 Zurrösen, 8 Rungentaschen im Außenrahmen. 2-teilige hydr. Rampen ca. 2.800+1.500 x 720 mm mit hydr. Verschub, hydr. Heckabstützung, Gummibelag. BPW-Achsen, EBS, Parabel-Federung mit Ausgleichsaggregat vorne und hinten. Beladehöhe ca. 910 mm. 2 Werkzeugkästen. Bereifung 245-70R17.5. Zuggabel gekröpft, Zugöse 50 mm, 2-Leiter Luft (Duomatik), 2-Leiter Hydraulik, 24 Volt. Lackierung orange. HU gültig bis 03-2027. = Weitere Informationen = Reifenmaß: 245-70R17.5 Federung: Parabelfederung Leergewicht: 9.600 kg Zuladung: 30.400 kg zGG: 40.000 kg Produktionsland: DE Wenden Sie sich an Jan-Marc Schwickert, um weitere Informationen zu erhalten. Kodpfxey Evvfj Aicolu

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 12/2006, skupna dolžina: 13.200 mm, skupna širina: 2.520 mm, skupna višina: 2.900 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17,5, barva: drugo, Leto izdelave: 2006, Oprema: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, twin tires, payload: 33,700 kg, unladen weight: 11,300 kg, gross weight: 45,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, body year of manufacture: 2006, low loader type: semi low-loader, loading platform length: 800 cm, gooseneck length: 390 cm, extendable chassis: center, extendable length: 580, axle type: SAF = Further Information = General information Cab: day cab Registration number: OJ-04-NP Drivetrain Fuel type: diesel Transmission Gearbox: manual transmission Axle configuration Tire size: 245/70R17.5 Brakes: drum brakes Suspension: air suspension Axle 1: twin tires; left inner tire tread: 5 mm; left outer: 6 mm; right inner: 7 mm; right outer: 6 mm Axle 2: twin tires; left inner: 4 mm; left outer: 4 mm; right inner: 9 mm; right outer: 7 mm Axle 3: twin tires; left inner: 4 mm; left outer: 4 mm; right inner: 7 mm; right outer: 5 mm Weights Unladen weight: 11,300 kg Permitted payload: 33,700 kg Kljdpfey Ad R Sox Aicju Gross vehicle weight: 45,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, year models, and price categories. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing selection • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Stanje: rabljeno, številka stroja/vozila: SZFPN3320ALD0xxxx, Leto izdelave: 2010, Veuillez indiquer le numéro de référence lors de la demande : 23529 Caractéristiques : Année modèle : 2010 Homologué UE jusqu’au : 30/09/2026 3 essieux Pneus (voir photos) Peu de rouille compte tenu de l’âge Poids à vide : 9 200 kg Poids total autorisé : 30 000 kg Rampes hydrauliques Longueur intérieure de la remorque : 8,623 m Longueur du plateau : 2,051 m Longueur du plateau : 5,960 m Kljdpfoy U T S Njx Aicju Feux arrière Prêt à être livré Description : Nous proposons à la vente une remorque porte-engins Istrail 3 essieux de 2010 avec rampes hydrauliques. Tout fonctionne selon le propriétaire. Très peu de rouille par rapport à son âge, en bon état général. Prêt à la livraison. Km : 1 Contrôle technique : Oui Homologué UE jusqu’au : 30/09/2026 Poids à vide : 9 200 Poids total : 30 000 Charge utile : 20 800 Largeur : 2,55 Longueur : 11,58 Modèle : Porte-engins 3 essieux avec rampes hydrauliques = Plus d’informations = Contactez ATS Norway pour plus de renseignements.

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Kljdpfjk Aht Uex Aiceu Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container Kedpfxsl Sl Izo Aicjlu 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform Kedpfx Ajhlz S Njicslu • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 235/75 R17.5, barva: siv, obratovalna teža: 11.000 kg, Oprema: ABS, Chassis: - Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer - Neck and kingpin plate 225 mm - Lowered bed rated for 25 t point load over 5 m - Outer frame closed to the outside with welded-on lashing rings for securing - Interchangeable 2" king pin - Rear hook-in rail for aluminum ramps Axles and Tyres: - BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tyres 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate) - 6 pairs of mushroom anchors in outer frame in the lowered bed - Storage box with lid in the lowered bed floor, front left and right Front Wall: - 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener - Tarp extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for separate tarpaulin extension piece - 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank - With belt pockets Kodpfxoiu Eu No Aicjlu Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door holders - Each door wing with aluminum double-joint hinge and two recessed grip hollows Front Corner Posts: - Roof height, bolted to front side Central Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length via trolley - Middle posts in the lowered bed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area) - Rear portal cross beam swivels away - PVC tarpaulin roof without customs closure - Manually operated hydraulic lifting roof on both sides, lift 450 mm - Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height - Including tarpaulin extension and apron at rear - Roof can be cranked out 900 mm at front wall Accessories: - Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm - Storage for 4 warning signs on inside of front wall, top right and left - 1 aluminum ladder with holder 2,500 mm long on front wall - 2 rows of self-securing aluminum slats - Metal mudguards with splash flaps - 1 overnight parking plate and 1 ADR plate on rear wall - BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points - Electrohydraul

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: Kodsk Ahugepfx Aicslu 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Ksdpsh Hm Thjfx Aicolu Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Kjdpfxsl Uxdke Aicslu Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control Kodpfx Aish Hm Tzscjlu - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey