Müller-Mitteltal Tieflader Ts3-Rm Ml30,0 Mit Radmulden Lenkachse nakup rabljenega (11.263)

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.000 mm, skupna višina: 40.000 mm, Leto izdelave: 2014, Oprema: ABS, Za vprašanja v zvezi z vozilom je vam na voljo gospod Seidel (po telefonu). MÜLLER MITTELTAL SF32BM/BT betonska polprikolica Nadgradnja: Liebherr HTM 1004 10m³, osi BPW, bobnaste zavore, vzmetni akumulator, Wabco ABS, 1. os dvižna, zračno vzmetenje, dovoljena skupna masa: 32.000 kg, lastna masa: 6.510 kg, nosilnost: 25.490 kg, profil pnevmatik: 1. os 14-15mm, 2. os 10mm Po želji vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel vas z veseljem vodi po telefonu. Več informacij najdete na naši spletni strani. Itodpfx Agoyfu Sdj Ieg ... Napake, spremembe in vmesna prodaja pridržane!!! = Dodatne informacije = Dovoljena skupna masa: 32.000 kg Za dodatne informacije se obrnite na gospoda Tobiasa Eberta.

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized steel sheet, mounted on the right side * Plastic quarter mudguards * Two-step entry on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights ----Tipper Platform: * Steel pallet three-way tipping body * Continuous side walls at the top with internal tube reinforcement (without central stanchions), foldable using drop side spring lifters * Rear wall foldable and pendulum-mounted, with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Mesh hooks, rear mounting rail for drive-on ramps * Prepared for later retrofitting with side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load Securing: * Each corner with 1 x 5 t lashing ring and each side with 4 x 3 t lashing rings embedded in the outer frame ----Aluminum Drive-on Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform integrated in the chassis, accessible from the rear ----Tires: * 385/55 R 22.5 tires ----Painting / Coating: Itodpfx Aol Th A Esg Iog * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Sidewall finish in RAL 9010 pure white * Side wall painting in other RAL colors available at extra cost ----Info: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange towing eye: * Vertically adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----General attachments: * Jost mechanical landing gear, front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel, right side * Plastic quarter mudguards * Two-step step on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights ----Tipper body: * Steel, pallet-width, 3-way tipper body * Continuous upper sidewalls with inner pipe reinforcement, foldable without center stanchions, with drop side spring assist * Tailboard foldable and swinging with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor * Net hooks, mounting rail at the rear for approach ramps * Prepared for subsequent installation of sidewall extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: * Each corner equipped with 1 x 5 t lashing ring, each side with 4 x 3 t lashing eyes recessed in the outer frame ----ALU approach ramps: * 1 pair aluminum approach ramps approx. 3570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-lockable storage compartment under the loading area, integrated into the chassis ----Tyres: * Tyres 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks and landing gear painted black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * Side boards painted in a RAL custom color (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL Iodpfov Dz N Njx Ag Ietg * New vehicle without first registration, including manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails Itsdpfxspk D Awe Ag Iog * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (RDÜ) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with raising and lowering function, equipped with Ride-to-Ride (RtR) valve * Smart-Board as infotool * Lateral underrun protection * Pivoting support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle with closed plastic mudguards, rear axle with straight hot-dip galvanized steel fenders, both with spray protection * Reflective contour marking strips on sides and rear * Folding cover (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye; height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side, each with 2 t lashing capability * Load securing package includes: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame—13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for up to 3 m overall width (not at the sloped rear end) * Widening planks stowed in the center of the load area * Hydraulic, one-piece, laterally adjustable ramps (approx. 3,000 x 720 mm) Itjdpfol Tpwyex Ag Isg * Excavator arm rest, length approx. 2,100 mm from rear axle to end cross-member (2 pairs of 6.4 t lashing rings integrated on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp incline) * Chassis, turntable, drawbar, folding extensions, and ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross vehicle weight * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 32 / 2026 * Sample photos

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight Iedpfxol Thxde Ag Ijtg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) Iodpjl Tnvgsfx Ag Ietg ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system Itodex Ipbgspfx Ag Iog * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights Iodpfx Agjx Ipb He Ietg * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 14.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring system * Emergency release for spring brake cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when brake is uncoupled) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Plastic toolbox 450 x 470 mm mounted right side * Side-mounted mesh box 1,000 x 500 x 5000 mm * Enclosed plastic mudguards front & rear * Closed side underrun protection, suitable as advertising panel * Rear underrun protection * Rear plastic anti-collision buffers * Rear ADR plate * 15-pin electrical connector * LED tail lights * Track length approx. 6,830 mm * Pneumatic 4-point clamping lock * Mechanically adjustable stop brackets (2 positions) front left and right on the guide tracks * 265/70 R 19.5 twin tyres Ijdpfx Agov Nulze Iotg * Unladen weight: 3,220 kg * --Permissible gross weight technically up to 20,000 kg-- * Ride height loaded: approx. 1,130 mm * Suitable for container lengths of 5,500 – 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, turntable, and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1: Suitable for swap containers (Abrollbehälter) and as low-loader trailer ----Braking System: * EBS electronic braking system * Emergency release facility for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lift and lower system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device Iedpfxel Tq Nmj Ag Ijtg ----Electrics / Lighting: * Tire pressure monitoring system, display option in truck via EBS signal (no truck-side installation required) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box, powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic buffer bumper * Foldable 'A' sign at the rear ----Loading Platform: * Main frame with raised outer frame to guide swap containers * Steel sheet floor with recesses for rollers in the bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point clamping lock and mechanical plug-in stops in the running channel at the front, securing certificate according to DIN 30722-1 * Weld bead as anti-slip covering in the inclined running area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs 10 t UVV lashing rings on each side of the outer frame * Each side with 4 x 2 t cloverleaf lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking elements, rear drop-supports hot-dip galvanized * Drawbar, axles, and air tanks painted in a black shade ----Additional Info: * New vehicle, no initial registration, full manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available approx. from KW 43 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as low-bed trailer ----Braking system: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lowering system, including RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made from powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made from galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour marking tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper buffers * Foldable rear A-board ----Loading area: * Main frame with raised outer rails to guide the roll-off containers * Steel floor plate with roller recesses in the bogie area * Container length of 5,500 - 7,000 mm possible * Pneumatic 4-way clamp lock, as well as mechanical plug-in stop angles at the front of the guide track, load securing certificate according to DIN 30722-1 * Weld bead as anti-slip coating in the ramp area * Mechanical drop-down supports at the rear ----Load securing: * 1 pair of 10 ton UVV lashing rings at the front on the bulkhead carrier * 3 pairs of 10 ton UVV lashing rings on the outer frame (side) * 4 pairs of 2 ton side lashing eyes with cloverleaf design on each side * 4 x 8 ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum access ramps (10.6 tons/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking parts, rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black ----Information: * New vehicle without first registration, with full manufacturer's warranty * Subject to errors and prior sale Ijdjl Tpc Aepfx Ag Istg * Sample images ----Delivery time: * Available from approx. week 43 / 2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Lifting middle axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) Itjdpfx Aetplv Teg Ieg ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumpers * Mechanical rear drop-down supports ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point container clamp locking as well as mechanically plug-in front stop angles in the guide tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with pendulum stoppers ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive load securing of skips * 4 lashing rails in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp incline running area * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) Itedpfjpk D I Aex Ag Ijg * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm Isdpfjl Th Adox Ag Ijtg * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at rear chassis frame * Mechanically adjustable warning panel sets front and rear Iodpfx Aol Tq Euog Ijtg * Front closed plastic mudguards and rear straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) toolbox lid on bogie platform * LED tail lights * Removable rear amber beacon * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four side stake pockets each with integrated 2 t lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of bogie platform, 5 pairs of UVV-compliant swivel and lowerable lashing rings loadable in all directions and embedded in external frame – at corners up to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in rear tapered section) * Widening planks stored in center of loading area * Hydraulic single-section loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Digger arm rest above rear axle up to crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on side of digger arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, bogie, drawbar, folding wideners & loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. calendar week 32 / 2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffer * Mechanical rear support legs ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 to 7,000 mm * Pneumatic 4-point container clamp lock and mechanical plug-in end stops at the front of the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swinging end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 cloverleaf-style lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp run-up area * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: Itodpfx Agjpk D Iij Ieg * Permissible total weight technically possible: 27,000 kg * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (electronic braking system with RSS) * Emergency release for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * Tire pressure monitoring system with display possibility in the truck dashboard via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar eye / Drawbar: * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) Itsdpex Ipbyofx Ag Isg ----General attachments: * Landing leg at the front * Foldable galvanized steel underrun guard for paver feeding * Enclosed single plastic mudguards * Front wall platform made of grating with step on drawbar and handholds on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Steel 3-way tipper body with continuous asymmetrical aluminum side walls – without center stanchion – pendulum-mounted with manual central locking, left side foldable with side board spring lifter * Tailgate – made from HBW 400 steel – pendulum-mounted with automatic 2-claw lock * 5 mm steel floor made from HBW 450 steel ----Load securing: * 4 x 3 t lashing rings per side – recessed and foldable – integrated into the steel floor ----Roll tarp: * Roll tarp – agate grey, similar to RAL 7038 * Tarpaulin tensioning using ratchet tensioners on the sides and tensioning rubber at the front and rear ----Painting: * Chassis, underrun guard, and drawbar hot-dip galvanized * Axles, air tanks, landing leg, and flange towing eye painted in a shade of black * Side wall painting according to RAL color of choice (excluding special or metallic paints); color can be changed up to approx. 6 weeks before completion ----Info: * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale * Sample images (vehicle images may vary due to special equipment) ----Delivery time: * Vehicle available from week 42/2026

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar, approx. 300 mm, with 40 mm flange towing ring * Jost mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on underrun guard * Plastic quarter mudguards * Net hooks located at the central locking bearing and 2 on the front wall * Chassis made of high-tensile steel * Steel three-way tipper body with reinforced "Strong" side walls (continuous upper side walls, reinforced with internal tube, no central stanchions, foldable with side wall spring lifter) * Bolt-on rear stanchions * Combination steel double-wing rear door, asymmetrical split, can swivel and be locked at 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bolt lock at the rear and central locking. Deactivation function for automatic tailgate operation when reverse tipping with open door wing Itsdpfxsx Hm Rcs Ag Iog * 1 x 5 t lashing ring in each corner and 4 x 3 t lashing points recessed into the outer frame on each side * 4 mm high-tensile steel floor plate * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable rear storage compartment recessed below the loading area in the chassis for the ramps * Drawbar, underrun guard, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and support winch painted in a black finish * Tires: 358/55 R 19.5 * Side wall coating in a RAL color of your choice (no custom or metallic finishes). Color can be changed up to approx. 6 weeks before completion. * Subject to errors and prior sale. * Available immediately from week 29/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic leaf springs with tandem compensating aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front-right on chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on side underrun protection * Plastic quarter mudguards * Tie-down hooks located at central locking mounts, plus 2 on the front wall * Chassis made of fine grain steel * Steel platform – 3-way tipper body with reinforced strong side walls (continuous upper side walls with internal tube reinforcement – without intermediate posts, side walls foldable with drop side spring assist) * Rear corner posts bolted * Combination steel wing-door rear wall – dual-wing asymmetrical, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping operation, locking via galvanised turning rod lock at the rear and central locking, deactivation function for automatic rear wall operation when tipping backwards with open door * Four 5 t lashing points in the corners, and four 3 t lashing rings recessed in the outer frame on each side * 4 mm steel floor made of fine grain steel * Mounting rail at rear for loading ramps * Reinforced body with cargo lashing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred & tracked vehicles * Lockable storage compartment at rear under load area recessed in chassis for the ramps * Drawbar, underrun protection, rear corner posts, and rear foldable supports hot-dip galvanized * Axles, springs, air tank and landing gear painted in black * Tyres: 358/55 R 19.5 * Drop sides painted in desired RAL color (no special or metallic finishes) – can be changed up to approx. 6 weeks before completion * Subject to errors and prior sale * Available immediately from calendar week 29/2026 * Example images Itjdox Hm Rispfx Ag Isg

Stanje: rabljeno, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2020, naslednji pregled (TÜV): 11/2026, Oprema: ABS, Nemško vozilo iz prve roke brez nesreč Stranske stranice iz aluminija SAF osi Bobnaste zavore dobro vzdrževano stanje najem, nakup, najem z odkupom polni servis najem od 590 EUR mesečno neto (cene najema so odvisne od trajanja pogodbe) vse informacije pod Primer najema z odkupom: Itjdsy Haz Uopfx Ag Ieg 479 EUR mesečno neto pri trajanju 36 mesecev, posebna najemnina 5.000 EUR neto in končna rata 2.000 EUR neto. Vse cene so neto, brez DDV in pod pogojem pozitivne kreditne ocene.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 10/2013, skupna širina: 2.750 mm, Leto izdelave: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-Axle | Hydraulic Low-Loading Platform | 48 t Gross Vehicle Weight | 275 cm Wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for transporting machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy construction and reliability. Technical Specifications: Brand: Müller Mitteltal Model: ITS-VLL 30.0 Profi Isdpfx Agsy I Si Te Ietg Chassis Number (VIN): WMM00000D0057250 Permissible Gross Weight: 48,000 kg Axle Configuration: 3 Axles Axle Loads: - Axle 1: 10,000 kg - Axle 2: 10,000 kg - Axle 3: 10,000 kg Permissible Rolling Load: 18,000 kg Loading Platform: Low-level loading (low loader design) Loading Ramps: Hydraulically operated Low-loading Platform: Height hydraulically adjustable (up/down) Tyres: Good condition Construction: All-steel chassis Maximum Speed: 80 km/h Features & Options: - Heavy-duty low loader design - Hydraulic height-adjustable low-loading platform - Hydraulic rear loading ramps - Wide (275 cm) and stable loading area - Suitable for excavators, rollers, cranes, etc. Robust construction, immediately ready for use Condition: The trailer is used but fully functional and shows age- and use-related wear. Technically, it is a robust and reliable equipment transporter. Ready for immediate operation – ideal for transport companies and construction firms. For further information or to arrange a viewing, please contact us. = Further Information = Axle Configuration Rear Axle 1: Twin tires; Max. axle load: 10,000 kg; Steerable Rear Axle 2: Twin tires; Max. axle load: 10,000 kg; Steerable Rear Axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 14,500 kg Payload: 33,500 kg gross vehicle weight (GVW): 48,000 kg Maintenance, History and Condition APK (Roadworthiness test): valid until 02/2027 Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information Please contact Klaas Gerrits or Henk Gerrits for further information.

Stanje: rabljeno, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, Oprema: ABS, Dobrodošli u Johanning’s Nutzfahrzeuge, vašeg specijalistu za mlada i ekskluzivna polovna vozila. ODMAH dostupno! Moguća isporuka. Isdpfx Agjycpd Aj Ietg Cena na upit! Finansiranje i lizing moguće na zahtev. Lokacija: 39606 Osterburg Marka: Mueller Mitteltal Tip: TA-2 / ETUE-TA-R 11,9 Godina proizvodnje: 2016 Radna težina: 3.250 kg TÜV: mart / 2026 SP: septembar 2026 Širina: 2,47 m Dužina: 6,20 m Visina: 90 cm Za dodatne slike ili video materijal slobodno nas kontaktirajte. Johanning’s Nutzfahrzeuge, Vaš partner za ekskluzivna i mlada polovna vozila. Naše usluge - Vaše prednosti (posle prodaje) - Otkupljujemo Vaše vozilo (u bilo kom stanju) - Besplatna odjava Vašeg vozila odmah - Registracioni servis za 150 € (uključuje takse i tablice) - Privremena registracija - Pregled i probna vožnja mogući u svakom trenutku uz prethodnu telefonsku najavu - Isporuka na Vašu adresu moguća po dogovoru. Greške i prethodna prodaja su mogući.

Stanje: rabljeno, lastna masa: 3.110 kg, največja dovoljena obremenitev: 9.490 kg, skupna masa: 12.600 kg, konfiguracija osi: 2 osi, prva registracija: 05/2016, naslednji pregled (TÜV): 02/2025, dolžina tovornega prostora: 4.550 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 600 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, turntable trailer, leaf suspension, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps. Iedpfxowth Iio Ag Iotg Body: 2-axle 3-way tipper trailer, Gigant axles, drum brakes, hot-dip galvanized frame! Loading height approx. 1290 mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brake * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable ___ mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed lateral underride guard usable as advertising space * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum structure; inner width between drum arms 1,700 mm, with clamp lock for drum securing at the ends of the carrier arms, plus central claw locking device for securing the cable drum structure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepwise profiled * Hydraulic supply and return lines * Steel construction and hydraulics prepared for retrofit of a separate engine * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty Itjdsxyniwspfx Ag Iog * Errors and prior sale excepted * Immediately available ex Egestorf