Müller-Mitteltal T3 Df 30.0 | Hydr. Rampen*Verbreiterbar*Hu 01/27 nakup rabljenega (12.762)

Stanje: rabljeno, največja dovoljena obremenitev: 7.000 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/1999, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Skupna masa: 10.000 kg Lastna masa: 2.000 kg Nosilnost: 7.000 kg Skupna dolžina: 6.900 mm Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / Širina naklada cca 2.450 mm Višina nakladanja: cca 1.100 mm Dodatne informacije - 40 km/h - 500 mm stranice - 500 mm pocinkana prednja nadgradnja - 8 parov pritrdilnih ušes na nakladalni površini Ppsdpfx Ajyz H A Ionmer - 4 pari pritrdilnih ušes pod nadgradnjo zunaj - BPW osi - Podporna noga - Dvižna vzmet za stranice - Nalivne rampe opcijsko 1.280,00 €

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck display via EBS signal – no truck-side installation required * SmartBoard infotool with pressure sensors for axle load display by axle group * 15-pin power connector * LED taillights * Removable rear LED rotating beacon ----General Attachments: * Warning sign package front & rear * 2 x toolboxes made of galvanized (powder-coated) sheet steel, approx. 650 x 300 x 600 mm, mounted right-hand side * Closed single plastic fender at the front * Straight rear steel mudguards with spray protection (anti-spray mist) * Side underrun protection ----Low Loader Deck: * Turntable platform extension by 520 mm with 45° corners and 3 recessed storage compartments including lockable lids * Floor over turntable platform made of 50 mm and on the low loader platform of 60 mm softwood * 20 mm rubber flooring in the running area instead of wooden floor, with a recessed bed length of 6,780 mm including the ramp slope * Rubber flooring on ramp slope left and right, approx. 860 mm long * Four stake pockets per side (stakes not included), each with 2 t lashing capability ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Turntable Platform: * 2 pairs of 13.4 t lashing rings on the outer frame of the turntable platform Recessed Bed: * Four pairs of 10 t folding and multi-directional lashing rings per side on the outer frame * Two pairs of 13.4 t swivel lashing rings each at the rear left and right ----Ramps: * Rubber covering on foldable ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m total width (not at the rear slope) * Widening planks stored in a side compartment on the left ----Dipper Stick Rest: * Dipper stick rest over rear axle to end of ramp slope, approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings on the sides of the dipper stick rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output from the truck over 40 – max. 120 l/min) ----Loading Dimensions: * Rear cargo area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Area above turntable: approx. 2,990 x 2,520 mm ----Loading Height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape on sides and rear * Chassis, turntable, ramps, and outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may include special equipment Ppedpeylfvmofx Anmer ----Delivery Time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone Pedpfx Asylfvgjnmjpr ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: rabljeno, največja dovoljena obremenitev: 19.800 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, Oprema: ABS, * Müller Mitteltal 3-osna prikolica za zabojnike za odpad * Tip TM 2 24 * Za dva zabojnika za odpad od 7 do 10 m³ * Zavarovanje tovora s samo dvema verigama na zabojnik * Dvojne pnevmatike 265/70 R19,5 * Zračno vzmetenje Ppsdpoyx R Enefx Anmjr * BPW osi * Vrtljivo vlečno uho pnevmatsko znižljivo s pnevmatskim sproščanjem * 8 UVV pritrdilnih obročev 5t za pritrditev napenjalnih elementov * 8 premakljivih omejevalnikov zabojnikov za bočno centriranje zabojnikov * EBS * Tehnično dovoljena skupna masa 27.000 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WMM000000L0066323, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.020 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dolžina tovornega prostora: 5.350 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 800 mm, skupna dolžina: 7.498 mm, skupna širina: 2.550 mm, stanje pnevmatik: 95 odstotek, barva: bela, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2021, Oprema: ABS, Prikolica kot nova Prodaja brez jamstva / garancije Pjdpfx Aeyt Igkenmepr Napake in vmesna prodaja pridržane! Podatki v tem oglasu so neobvezni opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Oprema navedena v oglasu se preverja posebej. Vse navedene informacije v oglasih so neobvezne!

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer/Ramps * BRAND NEW vehicle with no initial registration, * Available mid/end of May ’26 in RAL 7016 anthracite, Reference number for inquiries: 30504 * GVWR: 11.9 t, Payload: 8.77 t * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * 6.27 m x 2.47 m x 0.4 m laser-welded steel side walls, foldable with 2 spring assistors * Front wall bolted smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized) slides in front of ramps with storage holder behind front wall * Bolted rear stanchions (hot-dip galvanized) * 50 mm thick softwood floor * 4 UVV lashing rings LC 6300 daN, recessed front and rear in crossmember * 10 UVV lashing shackles LC 3000 daN recessed in existing hole pattern on outer frame * Ramps: one-piece hot-dip galvanized grating with anti-slip design * Pre-installed bracket for retrofitting container locks in front of the front wall Pjdpjyxbdbjfx Anmepr * Plastic toolbox in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (dual tires), parabolic springs * BPW axles with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12V + 24V * Side marker lights with indicator control * 1 removable LED rotating warning beacon including holder and installation ---- * Trade-ins possible * Financing via our partners with or without down payment or final installment and various terms available. Request your tailored offer! ---- * Example installment lease from our partner FM LeasingPartner: €475/month net for 60 months, no down payment, and zero final payment. Other terms, with or without down payment/final installment, are also possible. Request your offer! We are official Müller-Mitteltal distributor! ---- * Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours we are available by appointment * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, Mowimy po polsku, on parle français.

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * 3 in 1 = for roll-off, skip containers, and as a low loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS, indicator can be viewed in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underride guard * Plastic quarter mudguards with splash protection * Storage box for container nets made of galvanized sheet steel, approx. 960 x 300 x 400 / 450 mm, right side Pedpjl Thwcsfx Anmspr * Plastic rear impact protection buffer * Mechanical rear drop supports ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor with wheel depressions in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp lock and mechanically insertable stop angles at the front in the guide rail, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for lateral centering, front 4 skip stops are insertable with swiveling stops * Weld bead as anti-slip coating in the ramp area of the run-up slope ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for securing the skips with lashing elements (positive and non-positive locking) * 4 cloverleaf lashing points on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Information: * Load securing certificate in accordance with DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Gross vehicle weight of 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * 3-in-1 – Suitable for hooklift containers, skip loaders, and use as a low-loader ----Braking System: Ppodpfel Thv Rjx Anmer * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinder ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * RDÜ (tire pressure monitoring), in-cab display via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, mounted on the right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact bumpers * Mechanical drop-down support legs at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll containers * Steel floor plate with roller recesses in the bogie area * For hooklift container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical plug-in stops at the front in the running track; load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable container stops for lateral centering, front 4 stops plug-in with pivoting stop * Continuous weld bead as anti-slip coating on the ramp running area ----Load Security: * 3 pairs of 10 t UVV lashing rings mounted sideways for securing containers with positive locking and frictional connection * 4 cloverleaf-shaped lashing points on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for vehicles with rubber tires and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross vehicle weight technically possible up to 20,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm Pjdpfx Anexmpydsmopr * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles Ppjdpfsxmpykox Anmer * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool installed with pressure sensors for displaying axle group loads * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized * Axles, air tanks, and drawbar painted in black shade * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) Podpjxptn Dsfx Anmjpr * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve Ppedpfjl Tihujx Anmsr ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: rabljeno, konfiguracija osi: 1 os, prva registracija: 08/1993, Leto izdelave: 1993, Oprema: ABS, = Further Options and Equipment = - Electronic Braking System (EBS) Podjxt Sl Nepfx Anmopr = Notes = Müller-Mitteltal KA-TA Tipping Trailer Single axle Air suspension ABS Tyres 60% Processing We look forward to welcoming you for a consultation, contract signing, or vehicle collection at our dealership. Please schedule an appointment. If you are unable to visit us in person, we offer complete processing via phone, e-mail, WhatsApp, or fax. On request, we can deliver your new vehicle directly to your door. This means you benefit from the best price, maximum security, and convenience during your transaction. We are also happy to take your used vehicle in part exchange. We offer a digital vehicle appraisal based on your photos, even without you visiting our dealership. Our dedicated purchasing team guarantees you the highest price. Upon request, we can deliver your new 'used' vehicle nationwide, directly to your doorstep, and collect your trade-in vehicle. Financing - Leasing Immediate approval and old loan settlement Your specialist partner for passenger cars, transporters, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial estate) Over 400 vehicles in stock at all times The information provided in advertisements, on the internet, on price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability or warranty for typographical and data transmission errors. Listed equipment should be checked separately if necessary. The offer is generally without a new MOT; we are happy to provide a quote for an inspection at our partner workshop. Subject to errors and prior sale. = Further Information = Unladen weight: 3,700 kg Payload: 9,300 kg gross vehicle weight: 13,000 kg

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 03/2004, Leto izdelave: 2004, Oprema: ABS, = Additional options and equipment = - Electronic Braking System (EBS) = Notes = Müller-Mitteltal RAK German vehicle Roll-off trailer 2-axle Air suspension ABS Tyres 60% ID no. 709 We look forward to advising you, signing contracts, or handing over the vehicle at our dealership. Please make an appointment. If you are unable to visit our showroom, we offer complete processing by phone, email, WhatsApp, or fax. On request, we deliver your new vehicle directly to your door. This means you get the best price as well as maximum safety and convenience with your purchase. We are happy to take your used vehicle as a trade-in. We offer you the option of a digital vehicle appraisal based on your vehicle photos, even without visiting the dealership. Ppjdpfx Aoxyx Hajnmjr Our specialised purchasing team offers you a guaranteed top price. Upon request, we deliver your new ‘used’ vehicle nationwide directly to your doorstep and take your trade-in back with us. Financing – leasing Immediate approval and settlement of existing loans. Your specialist partner for passenger cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Over 400 vehicles in stock at all times. The information given in advertisements, on the internet, on price labels, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately by the buyer. Offer is generally without new TÜV approval; we will gladly provide you with an offer from our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 4,850 kg Payload: 13,150 kg Gross vehicle weight: 18,000 kg

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, Leto izdelave: 2005, Oprema: ABS, = Further Options and Equipment = - Electronic Braking System (EBS) = Notes = Müller-Mitteltal KA-TA 18 We look forward to advising you. Contract signing or vehicle collection takes place at our dealership. Please arrange an appointment. If you are unable to visit us in person, we can handle the entire process via telephone, email, WhatsApp, or fax. On request, we can deliver your new vehicle directly to your doorstep. This ensures you get the best price, maximum security, and convenience when taking delivery. We are happy to take your used vehicle in part exchange. We also offer digital vehicle appraisal based on your photos, without requiring a visit to our dealership. Our specialized purchasing team guarantees you the highest possible price. If you wish, we can deliver your new used vehicle nationwide right to your door and collect your trade-in at the same time. Financing and leasing available — immediate approval and settlement of your existing loan. Your expert partner for passenger cars, transporters, commercial vehicles, and construction machinery: ITC GmbH & Co. KG Siemensstraße 7 32312 Lübbecke (industrial area) Ppedpfx Aext Tf Rsnmer Always over 400 vehicles in stock. All details in advertisements, online listings, price tags, and pictures are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment must be individually verified where applicable. This offer does not include a new TÜV inspection; we are happy to provide an offer for a TÜV inspection through our partner workshop. Subject to error and prior sale. Information available in German. = Further Information = Unladen weight: 4,080 kg Payload: 13,920 kg Gross vehicle weight: 18,000 kg

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 08/1996, Leto izdelave: 1996, Oprema: ABS, = Additional Options and Equipment = - Electronic Braking System (EBS) = Remarks = Müller-Mitteltal Trailer ATL Roll-off trailer 2-axle Air suspension ABS Tyres 60% Information available in German Ppodpext Sd Eefx Anmer We look forward to advising you Contract signing or vehicle collection at our dealership. Please arrange an appointment If you are unable to visit our dealership in person, we offer complete processing via telephone/email/WhatsApp/fax On request, we can deliver your new vehicle directly to your door This means best price for you, maximum security and convenience during acceptance We are happy to accept your used vehicle as part-exchange We offer the option of digital vehicle evaluation based on your vehicle photos even without a dealership visit Our specialised purchasing team offers you a guaranteed top price On request, we deliver your new used vehicle nationwide directly to your door, and collect your trade-in for financing or leasing Immediate approval and settlement of existing credit Your specialist partner for cars, transporters, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Area) Over 400 vehicles permanently in stock The details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately. Our offer generally does not include new TÜV approval; we are happy to make you a quote with our partner workshop. Subject to errors and prior sale = Additional Information = Unladen weight: 2,360 kg Payload: 10,640 kg Gross vehicle weight: 13,000 kg

Stanje: rabljeno, največja dovoljena obremenitev: 29.850 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2012, naslednji pregled (TÜV): 04/2028, Leto izdelave: 2012, Interna številka vozila: G300402 Nemško vozilo Takoj na voljo na našem dvorišču v Kaufungen - Kassel, Nemčija Več INFO pri Luis Lucena Letnik 2012 Lastna masa priklopnika: 6.530 kg Priklopnik mešalec betona LIEBHERR 10 m³ Možne so napake. Z veseljem vzamemo vaše rabljeno vozilo v račun. Psdexy Ul Sepfx Anmepr Financiranje možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, največja dovoljena obremenitev: 15.100 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/1987, dolžina tovornega prostora: 8.650 mm, širina tovornega prostora: 2.480 mm, ? Mehanske rampe ? Nakladalna višina: cca 910 mm ? Nosilec rezervnega kolesa ? Vlečno uho 40 mm ? Rotacijska luč Psdpfx Aoyw Egwjnmspr ? Bobnasta zavora ? Listnato vzmetenje ? 1 x shranjevalna skrinja ? Dvojna kolesa ? SAF osi Vsi podatki brez garancije / Predhodna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 13.640 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2019, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.500 mm, HU: NOVO Skupna masa: 18.000 kg/20.000 kg Psdpfxoyw Ep Se Anmspr Lastna masa: 4.360 kg Nosilnost: 13.640 kg/15.640 kg Dodatne informacije - dvojna kolesa 235/75R17,5 - osi Gigant - 4 pari pritrdilnih obročkov - pnevmatska zapora - znižljivo podvozje - nakladalne rampe pribl. 2.300 mm v prostor za shranjevanje - zadnja podporna noga - skladiščna omarica - zaščita proti podletu

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED rear lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Mechanical rear drop supports ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Suitable for roll-off container transport with lengths from 5,500 - 7,000 mm * Pneumatic 4-point container locking clamps and mechanically lockable end brackets at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip locators for lateral centering of the skips, front 4 locators inserted with swiveling stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips * 4 cloverleaf-style lashing rails (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certification according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded beads as anti-slip coating on the slope in the running rail area * 1 pair of aluminum ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Painting: * Reflective contour tape on the sides & rear Ppjdpfjtplv Tsx Anmjr * Axles, turntable, drawbar, and air tank painted in a black tone * Main frame hot-dip galvanized ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without first registration with manufacturer's warranty * Errors and interim sales excepted ----Delivery Time: * Available from week 20/2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem Low Loader / Flatbed Trailer, drive-over platform Reference No. for enquiries: 27963, available end of March 2026 NEW VEHICLE incl. COC * GVW: 21t, Payload: 16.5t, hot-dip galvanised chassis * Available end of March 2026 * Flatbed version with 400 mm high front wall, ramp safety provide by ramp holding rods and diagonal supports * Version: GVW 21 t, reinforced frame and axle, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7,000 mm loading platform with 400 mm high front wall * Extended ramps: 3,000 mm, one-piece hot-dip galvanised ramps with galvanised grating * Ramp lifters with vertically adjustable springs for easy single-person operation Ppsdpfeyuq R Uex Anmor * Load securing package: * 4 UVV-compliant fall-type lashing rings (LC 8,000 daN) mounted to existing hole pattern in 45° outer frame, positioned approx. 1 m from front/rear cross-member * 10 UVV-compliant lashing rings (LC 3,000 daN) retractable in the existing hole grid of the outer frame * 2 UVV lashing rings each at front and rear, recessed in cross-members (LC 10,000 daN) * Additional lashing options via 50 mm (LC 1,200 daN) holes in front and rear cross-members * Fitting provisions for retrofitting container locks * Softwood flooring, 50 mm thick * Air suspension with Gigant axles incl. EBS 2S/2M * Raise and lower function * 235/75 R17.5 (8x), twin tyres with tyre pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead on the right-hand side (direction of travel) * LED lighting system * 7-pin socket on rear, wired for extra-length lighting with tail light (58 R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Oversize width warning panel * 1 removable LED beacon incl. holder and installation * Foldable rear supports, front support foot with gearbox winch ---- Finance lease sample from our cooperation partner MMV Leasing: €655/month net with 60 months term, no down payment and zero euro balloon payment Other terms possible with/without down payment / residual value. We are MüllerMitteltal authorised dealers. ---- Our opening hours: * Monday-Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of these hours by appointment We speak German, English, Russian, Polish, and French. Leasing, financing, trade-in possible.

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int.-št.: ZANDT Zelo dobro vzdrževana tandem šasija s kesonom Pedsymuz Uspfx Anmepr ZANDT Cargo * TAT B 110 * Keson * Ojačano leseno dno * Težko nosilne pritrdilne tirnice * Dvoosna tandem os * Široke pnevmatike * Nastavljiva vlečna kljuka * Največja dovoljena masa 11.900 kg * Zelo dobro stanje Možna je menjava staro za novo Financiranje od 3,99% Pridržujemo si pravico do napak in vmesne prodaje! Podatki v tem oglasu so neobvezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema nobene odgovornosti za tipkarske ali prenosne napake. Oprema iz oglasa se preveri posebej. Vsi podatki v oglasih so neobvezujoči! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00-17:00, petek od 9:00-14:00 ali po dogovoru!

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int. št.: ZANDT zelo dobro vzdrževana tandem ploščadna prikolica ZANDT Cargo * TAT B 110 * ploščad * ojačan lesen pod Ppedpfx Aoymuz Ienmsr * pritrdilne tirnice za težke tovore * tandem z dvema osema * široke pnevmatike * nastavljivo vlečno oje * dovoljena skupna masa 11.900 kg * zelo dobro stanje Možnost menjave starega za novo Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so nezavezujoči opisi in ne veljajo kot zagotovljene lastnosti. Prodajalec ne prevzema odgovornosti za tipkarske napake ali napake pri prenosu podatkov. Oprema, navedena v oglasu, je treba posebej preveriti. Vsi podatki v oglasih so nezavezujoči! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: rabljeno, lastna masa: 3.280 kg, največja dovoljena obremenitev: 14.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2013, vzmetenje: zrak, velikost pnevmatike: 265/70 R19,5, medosna razdalja: 5.030 mm, Oprema: ABS, Müller-Mitteltal hooklift trailer | Toolbox | Hot-dip galvanized | Tyres: 265/70R19.5 | BPW disc brakes | TÜV valid until | Subject to errors, input mistakes, and prior sale. Podpfx Answd Sdcomopr

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (therefore B-dimension approx. 8,080 mm) * 40 mm flange towing eye Ppjdsv D Tbkspfx Anmjr ---- Electric / Lighting: * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated by reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Landing gear at the front * External folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted to the left and right sides * Lateral underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable, locking dimension retracted to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with an absolute external width of 3,000 mm. ----Cargo Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing force every 480 mm * Option to fit 3 t drop-in lashing rings every 600 mm - 5 x 3 t UVV lashing rings installed per side - * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front and rear cross member for 1.2 t lashing points ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Storage compartment from the rear, recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from week 22/2026