Müller-Mitteltal 24 To. Kombi Cont. Fl.-Liftachse Neu nakup rabljenega (38.892)

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: Fgsdpoxptn Dofx Al Hsb * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Fedsn Aw Hkopfx Al Hegb Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: rabljeno, največja dovoljena obremenitev: 17.290 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS * 5-komorni zadnje luči * Oranžna rotacijska luč * Duomatik zračni priključek * BPW-ECO osi ----Nadgradnja: nizkopodni priklopnik, pocinkan okvir (1900+7000mm)/nakladalna višina pribl. 900 mm, zadaj poševno znižano/pristopna višina pribl. 770 mm, jeklena/lesena tla, razširljiv na 3 m, hidravlične nakladalne rampe (pocinkane) s protidrsno prevleko, prav tako hidravlično pomične v stran, vpenjalni obroči Prodaja samo pravnim osebam. PRI IZVOZU JE PLAČILO MOŽNO LE NETO ZNESEK!!!!! VSE INFORMACIJE BREZ GARANCIJE VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji poslovanja (glejte impressum). Fgsdsyulu Uepfx Al Hob

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int.-št.: ZANDT Zelo dobro vzdrževana tandem šasija s kesonom ZANDT Cargo * TAT B 110 * Keson * Ojačano leseno dno * Težko nosilne pritrdilne tirnice * Dvoosna tandem os * Široke pnevmatike * Nastavljiva vlečna kljuka * Največja dovoljena masa 11.900 kg * Zelo dobro stanje Možna je menjava staro za novo Financiranje od 3,99% Pridržujemo si pravico do napak in vmesne prodaje! Podatki v tem oglasu so neobvezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema nobene odgovornosti za tipkarske ali prenosne napake. Oprema iz oglasa se preveri posebej. Vsi podatki v oglasih so neobvezujoči! Fedpfxsymuz Us Al Hegb Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00-17:00, petek od 9:00-14:00 ali po dogovoru!

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int. št.: ZANDT zelo dobro vzdrževana tandem ploščadna prikolica ZANDT Cargo * TAT B 110 * ploščad * ojačan lesen pod * pritrdilne tirnice za težke tovore * tandem z dvema osema * široke pnevmatike * nastavljivo vlečno oje * dovoljena skupna masa 11.900 kg * zelo dobro stanje Možnost menjave starega za novo Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so nezavezujoči opisi in ne veljajo kot zagotovljene lastnosti. Prodajalec ne prevzema odgovornosti za tipkarske napake ali napake pri prenosu podatkov. Oprema, navedena v oglasu, je treba posebej preveriti. Vsi podatki v oglasih so nezavezujoči! Fgodpsymuz Ijfx Al Hsb Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, Oprema: ABS, * MüllerMitteltal nizkopodni priklopnik s 4 osmi T40 * 2x krmiljeni vrtljivi osi * Nemška prikolica * pero * hidravlično pomične rampe / levo-desno * deljene preklopne rampe * možnost razširitve * ABS * BPW osi * 40 t * lastna teža: 9300 kg Fgsdpeyuri Eofx Al Hsb * osne obremenitve = 10 t na os * popolnoma funkcionalen * pnevmatike v redu

Stanje: rabljeno, največja dovoljena obremenitev: 5.900 kg, skupna masa: 9.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2020, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 5 m³, Oprema: ABS, * ABS * 5-komorna zadnja svetla * Podesivi vučni uređaj po visini * Gigant osovine * Prednji oslonac na navijanje Fedeyncyhepfx Al Hjgb ----Nadgradnja: Niskopodni prikolica, približna visina utovara 870 mm, zadnji deo zakošen, visina uspona približno 780 mm, opružno rasterećene čelične stranice levo i desno, drveno dno, prstenovi i ušice za vezivanje. Opružno rasterećene i bočno pomične rampe za uspon sa vatrootpornim i protivkliznim rešetkastim prečkama od pocinkovanog čelika (dužina cca 2.600 mm), automatska zadnja podrška povezana s upravljanjem rampama, plastična kutija za alat ispred prednjeg zida. Šasija/prednji zid/vučno vratilo/zadnji zid/rampe i stubići pocinkovani. Prodaja isključivo pravnim licima. KOD IZVOZA SE PLAĆA SAMO CENA BEZ PDV-A!!!!! SVE INFORMACIJE BEZ GARANCIJE, POSEBNO OPREMA I DODACI. Osnov za sve kupoprodajne ugovore, fakture, profakture, narudžbine i prodajne razgovore su naši Opšti uslovi poslovanja (vidi Impressum).

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t Fgodpeyndh Hsfx Al Hob * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Floor height unladen 930 mm / laden 870 mm * One-piece ramps with hot-dip galvanized grid surface, slip-resistant design, retractable down to approx. 20 mm. Secured by retaining bar and diagonal brace * Ramp lifter with upright, adjustable springs for easy one-man operation * 4 UVV drop lashings (LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashings LC 3000 daN at approx. 600 mm spacing possible), closely spaced cross-stiffeners, high-ribbed front and rear closure with rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN retractable in the existing hole grid in the outer frame, additional * Additional lashing options via bore holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers * Toolbox in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable, 50 mm eye possible on request * 1 removable LED warning light at the rear * ---- * Leasing, hire purchase, financing, trade-in possible * Example: 510 euros for 60 months’ term, no down payment, no final installment * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours, viewings possible by appointment. We speak German, English, Polish, and French Leasing, financing, trade-in possible

Stanje: rabljeno, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, skupna dolžina: 7.500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2012, Uporabni material: Beton Lastna masa: 6.530 kg Nosilnost: 25.470 kg Fjdpfex Utq Sjx Al Hegb Skupna dovoljena masa (zGG): 32.000 kg

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje Fsdpfswmpbdox Al Hegb - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: novo, skupna masa: 36.700 kg, konfiguracija osi: 3 osi, Oprema: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low loader extendable telescopic – for building material and construction machinery transport - NEW - UNUSED - gross vehicle weight: 36,000 kg empty weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in the low-bed area (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatic locking, operated from the trailer plus an additional position for a 40ft container in the low-bed area Reinforced design for building material transport, rated for 20 t on 5 m at the center of gravity and for machine transport up to 20 t Fgedpfxsu A Nilo Al Hob Frame suitable for transporting timber construction parts L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads at the front and rear with support block Reinforced outer frame in cranked platform, 6 mm Reinforced outer frame in the low-bed area, 6 mm Tapered crossmembers Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stake pocket crossmember for box section stanchions 80x80 mm, as well as 1 pair of 5 t load securing rings integrated on the outside of the intermediate support Frame suitable for 2-axle tractor unit (SZM), saddle height (unladen) approx. 960 mm – 1,020 mm with air-suspended tractor Front: 3 pairs and rear: 10 pairs of 10 t lashing rings in the extendable outer frame, on both sides, can also be folded outward for oversize load securing 10 pairs of lashing mushrooms with welded-in round steel at the bottom outer frame Frame Equipment: 10 pairs of plug-in housings with reinforcement beams for box section stanchions 80x80 mm, on both sides of the outer frame 6 stake pocket crossmembers for box section stanchions 80x80 mm 24 steel box-section stanchions 80x80x5 mm, usable height approx. 2,000 mm, top with lashing holes for straps, hot-dip galvanized 3 pairs of container locks in the low-bed platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container when extended U-profile rail for ramp installation at rear frame end Support Device: Mechanical steel landing legs, 2 x 12 t 2 drop-down supports, both sides on rear frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reversing lock automatically activated in reverse gear Last axle steering Brake System/Suspension: Brake system manufacturer: Wabco Brake/air connections with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with lifting/lowering device, total lift approx. 200 mm Automatic adjustment to programmed ride height from 15 km/h Assistance & Safety Systems: Standard reporting interval: every 15 minutes when ignition is on every 24 hours when ignition is off Axle load display via EBS-CANbus signal for display in cab (truck must be appropriately equipped) Wabco SmartBoard for data readout via display (mileage, axle load unit, brake diagnostics etc.) Floor: 35 mm larch wood flooring, impregnated on both sides, laid longitudinally with small gaps, over-wheel areas with steel chequer plate covering Front Wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: bela, skupna masa: 32.000 kg, lastna masa: 6.600 kg, največja dovoljena obremenitev: 25.400 kg, velikost pnevmatike: 425/65R22,5, prva registracija: 03/2016, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Location of vehicle: Bovenden, 2 axles, BPW axles, air suspension, liftable first axle, ABS (anti-lock braking system), underrun protection, landing legs Superstructure: Liebherr concrete mixer type HTM 1004 approx. 10m³, 2x 10t BPW axles! Fgsdpfx Asi Rk Axjl Hob Suitable hydraulics for engine PTO on the tractor unit available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale, and errors!

Stanje: rabljeno, lastna masa: 2.700 kg, največja dovoljena obremenitev: 7.300 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2007, dolžina tovornega prostora: 5.020 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, storage box, height-adjustable drawbar. Body: Tandem low-bed trailer with mechanical loading ramps, 2x BPW axles, drum brakes! Loading height approx. 930 mm! Ramp length approx. 2600 mm! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors. Fjdpfxswvikqj Al Hjgb

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty Fgodpfx Aoq Dyv Ijl Heb * Subject to errors and prior sale * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V Fgsdpfetplwfex Al Hjb * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 19/2026

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2006, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.250 mm, * Dolly trailer for roll-off & skip containers * Pneumatic container locking system * Lowerable drawbar * BPW air suspension axles As inspected or offered, without additional services or accessories. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be provided with advertising stickers and/or signage. Our general terms and conditions of delivery and payment apply. We support you with export processing, preparation of export documents, procurement of license plates, supplier declarations, etc.! The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment must be checked separately if necessary. We expressly reserve the right to prior sale, as this item is also offered on other platforms. Accessory information is provided without guarantee. Fsdpfeizy Nysx Al Hogb Subject to changes, prior sale, or errors. We offer and strongly recommend a viewing and inspection to avoid any misconceptions regarding condition and suitability by the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: Fgjdpfxel Tlhre Al Heb * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes Fgjdpfx Ael Th Htol Heb * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing ring * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located in the central locking storage areas, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with continuous side walls, upper section reinforced with internal tube, without central stakes, fold-down sides with drop-side spring assist * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270°, not foldable, with additional pivot frame for automatic rear door opening during tipping, locking by galvanized rotary bar lock at the rear and central locking, deactivation function for the automatic rear door when reversing with open swing doors * Each corner with 1 x 5 t lashing point, plus 4 x 3 t recessed lashing rings per side in the outer frame * 4 mm fine-grain steel floor plate * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area at the rear * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanized * Axles, suspension, air tank, and landing gear painted in black * Tires: 285/70 19.5 * Sideboard paint finish in RAL 9010 pure white * Additional color options for side walls in RAL colors available at extra cost * Vehicle has a day registration (not in use) * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering function as well as return-to-ride valve * Pressure gauge for axle load determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panels front and rear * Front axle: plastic quarter mudguards with spray guards * Rear axle: straight, galvanized steel side skirts with spray guards * Reflective contour marking tape, side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reverse lights (controlled by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section ahead of turntable platform approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the steel plate of the turntable platform Fgedpfxol Tnu Aj Al Heb * Load securing package consisting of: 1 x 13.4 t UVV lashing eye left & right in front of front bulkhead support, 4 holes per side in the turntable platform for 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the end support, 4 pairs per side of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and recessed in the outer frame, 3 stake pockets per side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out outriggers for 3 m overall width (not in the rear slope) * Plank holder for extensions mounted longitudinally under the chassis on the left * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, with 2 pairs per side of 6.4 t lashing eyes in the excavator arm rest * Hardwood floor on the running surfaces of the low bed platform * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer boards of the loading ramps made of hardwood * Steel construction prepared for 6-valve control block * Loading edge unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, and drawbar painted in black shade-- * Tires 235/75 R 17.5 * The vehicle has a day registration from 07/2024, due to the lack of a tire pressure monitoring system, and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm front right side on the chassis Fsdpfel Th Dusx Al Hsgb * 15-pin power socket * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks installed at each locking point of the central locking system, plus 2 hooks on the front wall * Chassis made of fine-grained steel * Steel pallet three-way tipper body with continuous side walls, internal tube reinforcement, no center posts, foldable with drop-side spring assist * Rear posts bolted * Combination steel wing-door tailgate, asymmetrically split with 2 leaves, can be swung and locked to 270°, not foldable; with additional pendulum frame for automatic tailgate opening during tipping, rear locking with galvanized rotary bolt and central locking system, deactivation function for automatic tailgate function when tipping backwards with open wing door * Each corner fitted with 1 x 5 t lashing ring, and each side with 4 x 3 t lashing points recessed in the outer frame * 4 mm fine grain steel floor plate * Rear mounting rail for loading ramps * Reinforced structure with cargo securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment from the rear, recessed under the loading area in the chassis for storing the ramps * Chassis, drawbar, underrun protection, rear post, and rear folding supports galvanized * Axles, springs, air tank, and landing gear painted black * Tires 285/70 R 19.5 * Drop-sides painted RAL 9010 pure white * Sidewall painting available in an RAL color of your choice for an additional charge * Vehicle has day registration (unused) * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: rabljeno, Leto izdelave: 2013, Različni kontejnerji za Müller-Mitteltal CHK: - 7 kosov 4,5 - 5 m³, cena na kos 1.000,- € - 3 kosi 8 m³, cena na kos 2.000,- € Vsi kontejnerji so v uporabnem stanju. Letniki 2013 - 2015. Fgodpfexb N A Ijx Al Hjb = Dodatne informacije = Država proizvodnje: DE Za več informacij kontaktirajte Jan-Marc Schwickert.

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, Leto izdelave: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extra Features Equipment: - 2 spring-assisted lifts for 400mm high steel side walls - Reinforced and certified superstructure according to EN 12642 XL load securing certificate - 10 UVV lashing hoops in the existing perforated pattern in the outer frame - Additional clamped wooden floor Fjdoxcxmfepfx Al Hegb - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg load capacity Paintwork: - Wheels: silver - Chassis / front wall / drawbar / rear wall / stakes / ramps: hot-dip galvanized - Axles / springs: black - Side walls: RAL2011 deep orange We will be happy to offer you suitable financing, hire purchase, or leasing solutions. Delivery or shipping available by arrangement. We always have a selection of new equipment in stock and demo units available. Feel free to contact us! We rent vehicles with or without drivers, as well as machinery. A wide range of used machines and equipment always available. Subject to technical modifications, errors, and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 7.950 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2010, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.000 kg Lastna teža: 3.050 kg Nosilnost: 7.950 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: skupno cca 6.000 mm Širina: 2.550 mm / nakladalna širina cca 2.470 mm Nakladalna višina: 900 mm Dodatne informacije - po višini nastavljiva vlečna ojnica - podporna noga - stranske stene 400 mm, vzmetene - električno kolo - BPW osi - rešetkaste klančine z vzmetjo, bočno pomične - plezalne letve, zadnja podpora Fsdpox E I Utofx Al Hogb - velik pritrdilni paket

Stanje: rabljeno, največja dovoljena obremenitev: 10.100 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2001, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna teža: 13.500 kg Lastna teža: 3.400 kg Fgjdow Nu I Topfx Al Hob Nosilnost: 10.100 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: 6.000 mm Širina: skupna širina 2.550 mm / širina kesona 2.460 mm Višina nakladanja: ca. 1.000 mm Dodatne informacije - Pnevmatske gume: 285/70R19,5 - Stranske stene 400 mm, 1x deljene

Stanje: rabljeno, največja dovoljena obremenitev: 31.120 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2021, naslednji pregled (TÜV): 05/2026, Leto izdelave: 2021, Oprema: ABS, SCHWARZMÜLLER TIPPER TRAILER 2-AXLE THERMO BODY HARDOX ? LIFT AXLE ? VEHICLE HISTORY Fodpfx Aey Eux Ssl Hegb ✅ GERMAN VEHICLE ✅ ONE PREVIOUS OWNER ✅ VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT ✅ TIPPER SEMITRAILER ✅ 2 BPW AXLES ✅ STEEL BODY ✅ DISC BRAKES ✅ LIFT AXLE ✅ ALCOA ALUMINIUM RIMS ✅ AIR SUSPENSION ✅ ABS ✅ ROLLING TARPAULIN ✅ TIRE SIZE: 385/65R22.5 ✅ GOOD TYRES FURTHER DETAILS ✅ TIRE SIZE: 385/65R22.5 ✅ TYRES IN GOOD CONDITION ✅ VEHICLE IMMEDIATELY AVAILABLE ✅ READY FOR OPERATION ✅ GROSS VEHICLE WEIGHT: 36,000 KG ✅ UNLADEN WEIGHT: 5,880 KG ✅ PAYLOAD: 31,120 KG EXPORT / NOTES EXPORT SALES ONLY WITH A SECURITY DEPOSIT MIN. €500 - €2,000 EXPORT CLEARANCE (EXW) POSSIBLE WITHIN 10 MIN. (APPROVED EXPORTER). VEHICLE RESERVATIONS ONLY IN WRITTEN FORM. VERBAL AGREEMENTS ARE NON-BINDING. SUBJECT TO CHANGE, ERROR, AND PRIOR SALE. LEGAL NOTICE THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF §145 BGB. IT SERVES SOLELY FOR THE INITIATION OF A CONTRACT. ALL INFORMATION PROVIDED WITHOUT GUARANTEE. NO WARRANTED CHARACTERISTICS. SALE EXCLUSIVELY UNDER OUR TERMS AND CONDITIONS.