Fliegl Tps135 13,5 T Tandemplanenanhänger, Neuwertig nakup rabljenega (58.109)

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake Nlsdpfx Aei Ri Ryjm Teb 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: c13a96854ea37997845c1bf36, lastna masa: 6.860 kg, največja dovoljena obremenitev: 28.140 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235/75 17,5,

Stanje: novo, številka stroja/vozila: b50cac2c60a813b0968994fa0, lastna masa: 5.700 kg, največja dovoljena obremenitev: 18.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Full-width rear mudflap Preparation for widening to 3,000 mm (holes in outer frame, not in rear bevel) Low-loader lashing rings 1 pair of lashing cutouts embedded in the front longitudinal beam at the gooseneck, each rated for 10 t 7 pairs of lashing mushroom pins embedded on top and side of the outer frame, each rated for 10 t 1 x on the front gooseneck 5 x in the low-bed area 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated for 5 t (for lashing strap hooks) 5 x at the gooseneck, 6 x in the low-bed area, and 1 x in the rear bevel Drawbar system for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles, brand as per manufacturer’s choice Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5 Fulda Steel rims in twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 unmistakable coupling heads at the front, with connecting lines to the truck, Connecting lines extended by approx. 60 cm No ABS, but with mechanical ALB (automatic load-dependent brake valve), thus maximum 60 km/h permit Nodpfxji Ri Agj Am Tjlb Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front with connecting cable, extended by approx. 60 cm 1 LED beacon with holder, operated via parking light (lamp removable) 2 pairs of illuminated and extendable warning plates up to 3,000 mm Floor Front gooseneck with steel/chequer plate covering Toolbox recessed in the drive-over slant to gooseneck Following area with 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-bed loading area including rear bevel: 5,900 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wooden covering Spring-assisted lifting Operating Instructions For axle loads of 10,000 kg, an exemption permit is required; only indivisible loads permitted!!! The stated total weight is technically possible; depending on the load, the total weight may not be achievable within the allowable axle/support and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle as agricultural/forestry vehicle (LoF), (for Switzerland, max. 40 km/h possible) Prepared for double-line license plate holder No contour markings / reflective tape according to ECE R 048 Painting Frame: DB 7350 Novagrau 10-year corrosion protection warranty Drawbar galvanized or black, according to manufacturer’s choice Loading ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: 6e7907b4000c16661fa1c8a1f, lastna masa: 4.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis – Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front end – patented Without landing gear Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holder, stone-repellent surface Tow hook at rear Axles + Suspension SAF disc brake axles Axles/chassis laser alignment reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and traction aid, activated by 3x braking (traction aid active up to 30% axle overload and max. speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded hoses for easy maintenance Spring-loaded parking brake 2 interchangeable couplings at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractors capable of ensuring ABS functionality! With raise & lower valve Vehicle electronic stability program Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Polished aluminum rims, brand at manufacturer’s discretion Electrics Njdpfx Asi Ri Arem Telb 24 volt, multi-chamber rear lights, yellow LED side markers 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, no connecting cables Hydraulics Low pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (no hose connection) Operation hydraulic via truck PTO Body Aluminum box body made from high-grade, wear-resistant alloy; front wall 5 mm thick, external side walls made from 30 mm hollow section profiles, neatly welded, with bulk material-repellent top rail profile. Inside with ladder at front wall (not together with Cramaro system). Shovel and broom holders mounted externally on front wall. Greenline – conical and aerodynamic body shape Membrane – rear wall Rear wall as pendulum flap with double-joint hinge, external, double hook locking. Rear wall with rubber seal. Note: Heat resistant up to max. 170°C! Floor continuous 5 mm thick, Brinell 110. Note: Only suitable for transport of sand, gravel and round aggregate with max. grain size up to 20 mm! Warranty excluded for all other goods! Standing platform with ladder, terminal plate for air/electric connections and brake with large clearance for optimum accessibility. Roll tarp stored on right (FR-right), with central locking on left (FR-left). Operating instructions For salt, lime etc. transports, we recommend a tipping cylinder with hard chrome-plated piston rod to prevent corrosion. The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable while respecting permitted axle, coupling and king pin loads. (Incorrect load distribution may cause poor driving and trailing behavior) Revolution Link: Revolution Link user report: Registration Country / Registration Plates Germany With Dekra inspection and certificate (according to §13 EC – FGV) 24/7 service hotline Prepared for single-line number plate holder Reflective contour markings according to ECE R 048, white at sides, red at rear Paintwork Frame DB 7350 nova gray Body R

Stanje: novo, številka stroja/vozila: 15431365fe5515297a6a9fb05, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Half-shell mudguards on 1st and 2nd axles with antispray mud flaps behind each axle, antispray mud flaps before and after 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points each 5 t located in the excavator arm recess on the side at the main frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, can be locked with a padlock (lock not included) 1 storage box recessed into the floor at the gooseneck, with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm 70 mm timber planks for extension to 3,000 mm Storage compartment for timber planks under the loading platform Lashing eyes (40 securing options) 1 pair lashing eyes on gooseneck, each 5 t 9 pairs lashing mushrooms integrated on top and side of outer frame, each 10 t 2 x on gooseneck to the front 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each 5 t (for tension belt attachment) 3 pairs of additional folding lashing eyes, each 10 t 1 x inside next to the main frame at the beginning of the low-bed 1 x on gooseneck (protruding) 1 x recessed behind the last axle Trailer towing device turntable Drawbar with tested 50 mm towing eye, towing eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum braked axles Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) front and rear Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics Njdpfx Aei Ri A Som Telb 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, operated via sidelights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel chequer plate covering Followed by 70 mm softwood floor, wheel arch area with steel chequer plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber overlay Spring-assisted lifting Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for double-line licence plate holder Conspicuity marking with reflective strips according to ECE R 048, white at the side and red at the rear Warning panel according to ECE - 70 Coating Frame hot-dip galvanized incl. passivation, 15-year corrosion guarantee Drawbar galvanized or black, as per the manufacturer's choice Loading ramps hot-dip galvanized Attention! Archive pictures shown!

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) Nljdoi Ri Dlopfx Am Tjb 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, številka stroja/vozila: dd98a7658922be8f2e25bcadb, lastna masa: 2 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 10 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r 17,5, Further information Nljdpfxji Ri Ebj Am Teb Chassis Central Axle Trailer Low-bed Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel mudguards over both wheels Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & Suspension Euro-axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5 (manufacturer’s choice) Factory silver steel rims Braking System 2-line compressed air braking system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS plug at the front, including connection cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin mistake-proof plugs at the front, including connection cable Body TTS Low-mounted steel trough, bridge floor made of steel/chequer plate covering, steel sidewalls solidly welded to the floor Bridge length 4500 mm; trough at the front and sides with load-lock profile for attaching lashing straps (8 points in front, 12 per side) Note: Slight floor waviness possible due to welding distortion! 2 pairs of lashing rings, one at the corners of the steel trough front and one at the rear floor, each rated 5t 2 additional pairs of lashing rings in the floor, each rated 5t Ramps Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps Wooden covering Gas spring assist for one-man operation Operating instructions The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable while observing the permissible axle/load and saddle loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline markings with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame RAL 3002 Carmine red Ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: a3b1347da4aa7f31dceb875db, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 6 pairs of lashing eyes bolted to the outer floor/frame, each rated at 5 tons Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter-shell fenders Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Factory silver steel rims Braking System Dual-line air brake system Hand spindle parking brake Nodpfx Amsi Ri Ilj Telb Integral air reservoir 2 interchange-proof coupling heads at the front with connecting pipes to the towing vehicle ABS and ALB, ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white front position lights 2 white/red rear marker lights 2 x 7-pin interchange-proof plugs at the front, with connecting cable Floor Steel/chequer plate floor for high point load capacity Note: Slight floor waviness possible due to welding distortion! Platform length approx. 5,200 mm Rear tapering approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, 320 mm high Side walls 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / corner posts 1 pair of steel stanchions fixed to the frame and with holders for securing the loading ramps, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps wooden inlay with gas strut for one-person operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable within the permitted axle/support/coupling loads. (Poor driving and tracking may result from incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau, 10-year warranty against rust-through Front wall aluminum Side wall anodized aluminum Loading ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: e8628b18bda6db44719c946e0, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further Information Chassis Swap Drawbar Trailer Fine-grained steel welded construction Fliegl V-Stream frame Front stop, lengthwise adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holders Side underrun protection, aluminium Side underrun protection offset inwards for optimum clearance to swap body supports Rear underrun protection, steel Rear underrun protection shortened for optimum clearance to swap body supports, lighting system mounted for protection Half-shell mudguards Drawbar configuration for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake System 2-line compressed air braking system, colour-coded lines for easy service Air reservoir 208 litres Spring-actuated parking brake 2 mix-up-proof coupling heads at front, with connection lines to motor vehicle EBS, Electronic Braking System with EBS socket at front, including connection cable Note: The trailer may only be towed by tractors that ensure the functionality of ABS! With raising & lowering valve, hold function in both raised and lowered positions Wheels and Tyres 385/65 R22.5, brand as per manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Nedpsi Rivlsfx Am Tslb 2 white position lights front 2 white/red marker lights rear 2 x 7-pin mix-up-proof plugs at front, with connection cable 2 additional LED work lights at rear, controlled via reverse light 1 LED work light centrally at the front between the crossmembers, rear-facing, controlled via reverse light Country of Registration / Plates Germany with Dekra inspection and certificate (per §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective strips according to ECE R 048, white at sides and red at rear Paintwork Frame DB 7350 Novagrau. 10-year warranty against rust-through Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: d7a33d709a92cd60f18d010e8, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further Information Chassis Swap Central Axle Trailer Fine-grained structural steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20’ base for swap bodies 7.15 and 7.45 1 pair of gearbox support feet at the front, with straight bottom part and single-side operation on FR right 2 wheel chocks with holders Side underrun protection made of aluminium Side underrun protection set inwards, for optimal clearance to the swap body supports Rear underrun protection made of steel Half-shell mudguards Mud flaps Central axle trailer drawbar system Drawbar with tested 50 mm towing eye, freight forwarding specification (not suitable for trucks with tail lift; exact review required in case of order) Axles + Suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system; colour-coded line routing for easy servicing Air reservoir 208 litres Spring-loaded parking brake 2 foolproof coupling heads at the front, with connection lines to towing vehicle, connection on FR right EBS, Electronic Braking System with EBS socket at the front, with connecting cable, connection on FR right Attention: The trailer must only be towed by vehicles which ensure the function of the ABS! Nljdpfxji Riwbo Am Teb With lift & lower valve, hold function in both lift / lower position Wheels and Tires 385/65 R22.5 make Athos Steel rims, factory silver Electrics 24-volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane indicator lights at the rear 1 x 15-pin plug at the front, with connection cable, connection on FR right 2 additional LED work lights, integrated in the rear, switched via the reversing light 1 LED work light at the front centered between the supports, shining to the rear, switched via the reversing light Operating Notes The specified gross weight is technically possible; depending on the type of load the gross weight may not be achievable within the admissible axle, tongue and king pin loads. (Poor driving or trailing behavior possible due to improper load distribution) Country of Registration / License Plates Germany With Dekra inspection and appraisal (according to §13 EC - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective tape per ECE R 048, white on sides and red on rear Paintwork Frame DB 7350 Nova Grey, 10-year corrosion warranty Note: Archive images!

Stanje: novo, številka stroja/vozila: bdf30cb8a53c70e900bdb40a7, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Gear support foot at the front 2 wheel chocks with holders Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the load platform Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker equalization) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel rims, factory silver Braking System 2-line air brake system with color-coded piping for easy service. Manual spindle parking brake Integral air tank ABS and ALB, with ABS plug at the front, including connection cable. Note: The trailer may only be towed by vehicles that guarantee ABS functionality! 2 non-interchangeable coupling heads at the front, with connecting lines to the truck Electrics 24 Volt, multi-chamber lighting, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Hydraulics Three-way tipping system, hydraulic multi-piston cylinder with stroke limiter and safety cable Low pressure cylinder up to max. 170 bar, without restrictor. If required, the restrictor must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Tipping operated hydraulically via truck PTO Tipper Body Robust tipping platform with 4 mm steel sheet floor, steel side wall construction, continuous side walls, foldable and swinging with central locking at the bottom. Removable rear corner stanchions. Rear wall foldable and swinging, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 bottom hinges. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated for 5 tonnes Operating Notes The specified gross weight is technically feasible; depending on the cargo, the gross weight might not be attainable while complying with permissible axle/support/kingpin loads. (Poor handling or tracking may result from incorrect load distribution) Registration/Country & Plates Country of registration: Germany with Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Nedpfx Aji Riwiom Telb Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year anti-corrosion warranty against rust-through Side wall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox are optionally available at additional cost Note: Archive images

Stanje: novo, številka stroja/vozila: 068983c41e44eb5660fa9100c, lastna masa: 6 kg, največja dovoljena obremenitev: 28 kg, skupna masa: 35 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r19,5, Further Information Chassis, Fifth-Wheel, Logistics Fine-grained steel welded construction, with preload for slight neck area pretension, fifth wheel plate with replaceable 2" kingpin X-tra Long, with 15,030 mm internal length New type slightly inclined outer frame with Load-Lock profile for securing lashing straps 24 t twin-speed landing gear, operable from one side, with straight lower section, without compensating device Note: Free support foot external dimension or free rear swing radius approx. 1,930 mm Extending ladder at rear Lateral door retainers 2 wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter mudguards in front of the first axle and behind each axle Rear impact guard Axles + Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake System Dual-line compressed air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle working on last axle, maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS CAN-bus signal, for display in the driver’s cab, truck must be preconfigured accordingly; not installed (not a certified scale) Wheels and Tyres 435/50 R19.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side lighting Side yellow LED lighting linked with indicators, flashing Side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Floor Phenolic plywood, approx. 30 mm thick, on longitudinal subframes for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Front Wall / Front Corner Raves 2 pieces, 580 mm high, steel corner raves in high-volume design, release device for side curtain at bulkhead, crash blocker, inner steel rear impact guard at approx. 140 mm height Centre Stanchions 3 pairs of sliding stanchions moveable along full length, with quadruple pocketing and long lower pocket 3 pairs of stanchion positions Insert Slats Nledpfx Amji Riwus Tsb 5 rows of wooden insert slats Rear Wall / Rear Corner Raves Rear corner raves, steel up to lower roof edge, fitting for curtain with round tube and curtain tension ratchet Double-winged tail doors, each with 2 internal locking bars Curtain Curtain with welded horizontal and vertical straps Tension closures made of stainless steel Roof Sliding roof, rear end-lift foldable, canopy can be slid from rear to front, L-roof beam for automotive industry, clear internal width between roof beams approx. 2,490 mm, curtain colour: white Roof non-elastic, minimal deflection of roof beam during loading and unloading EcoLift - hydraulically liftable roof by approx. 380 mm on both sides, gas strut-assisted 3 driving positions at the front: Internal height at front approx. 2,900mm / 2,950 mm / 3,000 mm, set to approx. 3,000 mm Optimized rain gutter at rear, upper end spar, above doors Operating Instructions Special permit required if total train length exceeds 16,500 mm. When assembling the truck and trailer combinations, ens

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Nljdpfoi Ri Ddex Am Tjb Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: 074630ca1b8dc2d710f82c15a, lastna masa: 3.980 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis – Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front end – patented Without landing gear Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holder, stone-repellent surface Tow hook at rear Axles + Suspension SAF disc brake axles Axles/chassis laser alignment reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and traction aid, activated by 3x braking (traction aid active up to 30% axle overload and max. speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded hoses for easy maintenance Spring-loaded parking brake 2 interchangeable couplings at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractors capable of ensuring ABS functionality! With raise & lower valve Vehicle electronic stability program Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Polished aluminum rims, brand at manufacturer’s discretion Electrics 24 volt, multi-chamber rear lights, yellow LED side markers 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, no connecting cables Hydraulics Low pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (no hose connection) Nsdpfxei Ri H Se Am Telb Operation hydraulic via truck PTO Body Aluminum box body made from high-grade, wear-resistant alloy; front wall 5 mm thick, external side walls made from 30 mm hollow section profiles, neatly welded, with bulk material-repellent top rail profile. Inside with ladder at front wall (not together with Cramaro system). Shovel and broom holders mounted externally on front wall. Greenline – conical and aerodynamic body shape Membrane – rear wall Rear wall as pendulum flap with double-joint hinge, external, double hook locking. Rear wall with rubber seal. Note: Heat resistant up to max. 170°C! Floor continuous 5 mm thick, Brinell 110. Note: Only suitable for transport of sand, gravel and round aggregate with max. grain size up to 20 mm! Warranty excluded for all other goods! Standing platform with ladder, terminal plate for air/electric connections and brake with large clearance for optimum accessibility. Roll tarp stored on right (FR-right), with central locking on left (FR-left). Operating instructions For salt, lime etc. transports, we recommend a tipping cylinder with hard chrome-plated piston rod to prevent corrosion. The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable while respecting permitted axle, coupling and king pin loads. (Incorrect load distribution may cause poor driving and trailing behavior) Revolution Link: Revolution Link user report: Registration Country / Registration Plates Germany With Dekra inspection and certificate (according to §13 EC – FGV) 24/7 service hotline Prepared for single-line number plate holder Reflective contour markings according to ECE R 048, white at sides, red at rear Paintwork Frame DB 7350 nova gray Body R

Stanje: novo, številka stroja/vozila: 45d76d32267904923b7adcdea, lastna masa: 4.980 kg, največja dovoljena obremenitev: 30.020 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable kingpin (size 2) Curved front wall (patented) 24t, 2-speed landing gear with single-side operation, straight foot, without load equaliser Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holder with stone-repellent surface Tow hook at rear Axles and Suspension SAF disc brake axles Laser-measured axles/chassis – reduces tyre wear and fuel consumption Air suspension 1st axle lift axle, automatic, incl. forced lowering and traction aid, activation by braking 3 times (traction aid operates up to 30% axle overload and max. speed of 25 km/h) Hot-dip galvanised lift axle mechanism – 10-year warranty against rust-through Brake System 2-line compressed air brake system with colour-coded lines for easy service Spring-loaded parking brake 2 fool-proof coupling heads at the front, no connecting line EBS (Electronic Braking System) with EBS socket at front, no connection cable Note: The trailer may only be towed by towing vehicles that ensure functional ABS! With raise/lower valve Nlodpfx Amsi Ri Ide Tjb Vehicle Stability Control System Wheels and Tyres 385/65 R22.5 – brand at manufacturer's discretion Polished aluminium rims – brand at manufacturer's discretion Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, no connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (no hose connection) Hydraulic operation via truck PTO Body Aluminium box body, made of high-quality, wear-resistant material; front wall 5 mm thick, outer side walls made of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent top rail. Internal access ladder at front wall (not compatible with Cramaro). Shovel and broom holder outside on front wall. Greenline – conical and aerodynamic body shape Flexible rear wall Tailgate as pendulum flap with double hinge, external, with double hook locking Tailgate with rubber sealing (Note: Heat-resistant up to max. 170°C!) Floor continuously 5 mm thick, Brinell 110 (Note: Only for transport of sand, gravel, and round gravel with max. grain size up to 20 mm! All other materials are excluded from warranty!) Standing platform with access, connection plate for air/electrics and brakes with large clearance for optimum operability Roll tarp stored on right side (view FR-right), with central locking on FR-left Operational Notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and rust. The specified total weight is technically feasible; depending on the load, the permissible total weight may not be achievable when adhering to legal axle, support, and saddle loads (poor driving and trailing characteristics possible due to incorrect load distribution). Revolution Link: Revolution Link User Report: Registration Country / Plates Germany With Dekra inspection and certificate (as per §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity markings with reflective strips according to ECE R 0

Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box incl. Turntable front structure Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Extendable widenings to 3,000 mm (not at rear taper) (track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central compartment on loading area for timber planks 70 mm timber planks for widening to 3,000 mm Lashing points Low-loader 3 pairs of integrated lashing points, each rated to 10 t, at the front floor 6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t 1 x at neck area remaining points distributed, distance no greater than 1,200 mm 1 x at rear taper 5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly for trailer turntable Nlsdpfx Amoi Ri I Eo Tsb Drawbar with certified 40 mm towing eye Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with ABS connector at front, connection cable included Attention: The trailer may only be towed by vehicles that ensure ABS functionality! Electrics 24-volt multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear lane marker lights 2 x 7-pin non-interchangeable connectors at the front, with connection cable 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-lit and extendable to 3,000 mm Floor Steel floor at front section thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear taper with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable wooden inlays spring-assisted lifting Operating instructions Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!! The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution) Country of Registration / Plates Registration country: Germany 1 with Dekra inspection and report (according to §13 EC-FGV) 24/7 service hotline prepared for 2-line license plate holder Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear Paint Frame RAL 3002 Carmine Red 10 years warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Attention: Archive photos!

Stanje: novo, številka stroja/vozila: 6d88bda3a1ee2464a81b34f36, lastna masa: 4 kg, največja dovoljena obremenitev: 13 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction with a slight central camber, turntable with heavy-duty ball bearing slewing ring, chocks with holders, quarter shell mudguards in front of and behind each axle. Nlsdpoi Ri N Aofx Am Tob Lashing Points Low Loader Over front axle: 2 pairs of ring lashing eyes (each 5 t) at the front on the cranked section Low-bed: 4 pairs of lashing eyes (each 6 t) at the sides of the lowbed 5 pairs of lashing eyes (each 5 t) between the longitudinal beams Drawbar Assembly Turntable Trailer Drawbar with certified 40 mm towing eye, mechanically adjustable in length by 6 x 100 mm increments and lockable (Drawbar length 1,700 – 2,300 mm) Axles + Suspension BPW drum brake axles with 10 t axle load each, slack adjusters. Continuous axle brake test up to 105 km/h. Rear axle can be removed manually. To do so, release air locking mechanism, lower the rear section to the ground, disconnect hydraulic hoses from rear section, insert the transport bar into a rear socket, and by gently pushing down and simultaneously pulling backwards, release rear section (parking brake released). After loading/unloading, move rear section into position and hook up to mark. Then raise rear section to driving height and connect hydraulic hoses. Confirm bolt locking (visual inspection if bolt snaps in) and check rear function. Air suspension with lift & lower valve. Wheels and Tires 235/75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver. Braking System 2-line compressed air brake system, spring-loaded parking brake, 2 fool-proof coupling heads at front with connection lines to tractor, EBS, electronic brake system with EBS plug at front with connection cable. Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow LED side marker lights, 2 white position lights front, 2 white/red lane control lights rear, revolving beacon with bracket, powered via parking light (removable), 2 pairs of warning boards double LED illuminated and extendable up to 3,300 mm, removable with plug, 2 x 7-pin fool-proof plugs at front with connecting cable, 1 x 7-pin agricultural plug, voltage converter 12/24 volt (for electrics only, not for ABS/EBS) Floor Steel/aluminum checker plate floor on cranked section, between longitudinal and cross beams with perforated cover plates. Axle cover not drive-over, widening to 3,000 or 3,300 mm possible. Operating Instructions Note! For 10,000 kg axle load, a special permit is required. Permit must be applied for separately in each federal state; the legislator is not obliged to grant approval for 20 t GVW. Customer’s risk. Special permit required if total train length exceeds 18,750 mm. Observe country-specific registration regulations. The stated gross weight is technically possible; depending on the cargo, the gross weight may not be achievable in compliance with permissible axle, support, and fifth wheel loads. Observe BO-circle!!! Registration / License Plates Registration country: Germany, with Dekra inspection and report (per §13 EC-FGV), prepared for single-line license plate holder, ECE-70-compliant warning board, contour marking with reflective strips per ECE R 048 Paintwork Front frame hot-dip galvanized incl. passivation, rear frame RAL9006 silver, drawbar KTL black Attention: Archive images!

Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Rear foldable support 2 wheel chocks with holders Side underrun protection in aluminium Full-width rear mudflap Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm) Central storage compartment for timber planks on the loading platform 70 mm timber planks for widening to 3,000 mm Tie-down eyes for low-loader: 1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t 7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t 1x front on swan neck Nedei Riwfspfx Am Tjlb 6x in low bed area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included) 2 additional pairs of foldable lashing eyes, each rated at 10t 1x on swan neck (protruding) 1x behind the last axle, recessed in the floor Drawbar assembly for turntable trailer: Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235/75 R 17.5 Manufacturer's choice, with M&S marking Steel rims in twin arrangement, factory silver finish Braking System 2-line compressed air braking system Spring-actuated parking brake 2 foolproof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS socket at the front and connecting cable Brand: Wabco or Knorr Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof plugs at the front with connecting cable 1 LED beacon with bracket, switched via parking lights (lamp removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Front swan neck with steel chequer plate covering Storage box recessed in the approach slope to the swan neck Then 70 mm softwood flooring, in wheel arch area with steel chequer plate Rear slope with 70 mm softwood flooring Low-bed area incl. rear slope 6,500 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment) Wooden covering Spring-assisted lifting support Operating Instructions At 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution) Country of Registration / Pla

Stanje: novo, številka stroja/vozila: f80f2330e1318ef03bc20755e, lastna masa: 3.200 kg, največja dovoljena obremenitev: 35.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information: Nsdpfxji Riwqe Am Tslb Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, only 2 longitudinal frame members as double-T beams for subsequent attachment of a front end gantry in the latest/current version, outer frame slightly inclined with load-lock profile for tie-down strap hooks (Note: to hook-in the straps in connection with side walls, the side boards must be opened!), 24-ton, 2-speed landing gear, single-sided operation, with straight lower section, without compensating slide, wheel chocks with bracket, folding aluminium side underrun protection, extendable galvanized steel rear underrun guard, half-shell mudguards delivered loose, not installed, with anti-spray splash guards behind each axle, 1 plastic water tank, approx. 30l capacity, installed front left. BPW disc brake axles with 430 mm disc diameter, axles/chassis laser-aligned to minimize tire and fuel consumption, air suspension, 1st axle automatic lift axle, also manually lowerable, operable via manual control on the vehicle. 2-line compressed air brake system with 1 standard central air tank, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting hose, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable, EBS 2S/2M, test port for brake cylinder pressure at the external EBS module. Note: This trailer may only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve, control unit + brakes integrated into the frame as with a tipper semi-trailer, mounted in front of the axles. Brake pad wear indicator for disc brakes via ABS/EBS lamp in the truck. 385/65 R22.5 Continental brand, steel rims, factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting as on tipper semi-trailer, 3000 mm width must be observed, 2 front white LED position lamps, supplied loose, 2 white/red lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without interconnecting cable. Germany, EC 2007/46 type approval for complete vehicle, 24/7 service hotline, prepared for double number plate holder (single line), 1 x plastic and 1 x stainless steel interchangeable holder. Warning sign according to ECE - 70, aluminium, loose, EBS, safe parking, without contour markings / reflective tape according to ECE R 048. Frame: DB 7350 Nova Grey, landing legs: Black coated Available immediately!

Stanje: novo, številka stroja/vozila: 81b04fd2e28f354df79a4c3b3, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5``, Further information Chassis: Central axle swap trailer Fine-grain steel welded construction Front stop, adjustable lengthwise and foldable 2 pairs of removable guide rollers, front and rear Locking-folding adapter + height adjustment for support height 1,000–1,120 mm, folding centre supports and guidance rollers repositionable upwards 4 container locks with robust outriggers on 20' base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support legs at the front, with straight base and single-side operation, positioned front right 2 wheel chocks with holder Side underrun protection: Aluminium Rear underrun protection: Steel Half-shell mudguards Drawbar arrangement: Central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift; detailed verification required upon ordering) Undermount coupler drawbar, free drawbar length approx. 2,200 mm Axles + suspension: SAF drum brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system: 2-line compressed air braking system, colour-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle, connection front right EBS: Electronic Braking System with EBS socket at the front, with connecting cable, connection front right Warning: The trailer may only be towed by towing vehicles that ensure ABS functionality! With lifting & lowering valve, holding function in both lower and raised positions Vehicle stability control system Wheels and tyres: 235/75 R17.5'', brand at manufacturer’s discretion Steel twin wheels, factory silver Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED marker lights 2 white position lights at front 2 white/red lane-keeping lights at rear Nedpji Riy Njfx Am Tolb 1 x 15-pin socket at the front, with connecting cable, connection front right 2 additional LED work lamps at the rear, controlled via reverse light 1 LED work lamp centrally at the front between the crossmembers, rear-facing, controlled via reverse light Operating instructions: The indicated gross weight is technically possible, yet depending on the cargo, the gross weight may not be reached when observing permitted axle, support, and kingpin loads. (Poor driving and trailing characteristics may result from improper weight distribution) Country of registration / Plates: Germany With Dekra inspection and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-row licence plate holder Warning plate as per ECE-70 Contour marking with reflective tapes according to ECE R 048—side white, rear red Paintwork: Frame DB 7350 Novagrau 10-year warranty against rust-through Note: Archive images!

Stanje: novo, številka stroja/vozila: e7fbe178b85a202cade7e95af, lastna masa: 5 kg, največja dovoljena obremenitev: 22 kg, skupna masa: 29 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Nlodpfoi Ri Hvex Am Teb Chassis: Semi-Trailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable king pin, two king pin positions. Outer frame slightly sloped with load-lock profile for attaching lashing straps. Note: When using lashing straps in conjunction with side boards, the side boards must be opened to attach the straps! 2 pairs of lashing rings recessed into the outer frame on the gooseneck, each rated at 5 tons 8 pairs of lashing rings recessed into the outer frame in the low bed, each rated at 5 tons 24-ton two-speed landing gear, single-sided operation, with straight lower section, without sliding compensation 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter shell mudguards in front of and behind the axle assembly 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished lockable door 2 pairs of stake pockets recessed into the outer frame on the gooseneck, internal dimensions 70 x 40 mm 6 pairs of stake pockets recessed into the outer frame in the low bed, internal dimensions 70 x 40 mm !!Internal width between stakes: 2,420 mm!! 3 lashing/stake rails in the low bed, recessed crosswise into the floor across the entire width up to the outer frame (max. usable internal width between external drop-in stakes approx. 2,170 mm), approx. 100 mm high. With 20 mm round bar rails, top and bottom, approx. 60 mm clearance between the round bars (top to bottom). Bottom finished with angle plate, half open to below. For lashing and setting stakes 80 x 80 mm. Quantity: Drop-in stakes B=80/T=50/L=1200 mm, hot-dip galvanized Quantity: Drop-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Note: Stake pockets / drop-in stakes are not intended as the sole means of load securing for long materials, pipes, etc. without lashing. Rear extension manual with hand crank, extendable approx. 1,500 mm, lockable every 500 mm, with support beam; load capacity at center of gravity: approx. 2,000 kg over entire width at 500 mm, 1,000 kg at 1,000 mm, 500 kg at 1,500 mm; includes extendable rear underrun guard with lighting. 2 pairs of drop-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Open storage compartment for drop-in stakes at the front wall or below the load area (for 10 drop-in stakes 80 x 50 x 1200 mm and 4 stakes 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axles/chassis laser aligned, reduces tire wear and fuel consumption Last axle is steering, with automatic reverse lock via reverse light and additional manual lock on the vehicle via a hand button. Air suspension with raise & lower valve Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel twin rims, factory silver Braking System 2-line compressed air brake system Spring-actuated parking brake 2 foolproof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, no connection cable Attention: The trailer may only be towed by vehicles that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, for display in driver’s cab; truck must be properly equipped, no truck installation (not a calibrated scale) Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, without connecting cables 2 additional LED work lights at rear, switched via reverse light 1 LED rotating beacon with bracket, switch

Stanje: novo, številka stroja/vozila: f79a9f15e7131d57a512793ab, lastna masa: 8.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminium Rear spray guards across the full width Quarter fender before 1st axle Extendable outriggers up to 3,000 mm (not in the rear slope area) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Lashing points Low-bed 1 pair of lashing rings on gooseneck, each rated at 5 t 9 pairs of lashing mushrooms, flush-mounted on the top and side in the outer frame, each rated at 10 t 2 x front on gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated at 5 t (for attaching tie-down straps) Drawbar System Turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mount and mechanical axle load compensation (rocker balance) front and rear Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 swap-proof coupling heads at the front with connection lines to towing vehicle ABS and ALS, with ABS connector at the front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with holder, switchable by parking light (removable) Nlsdpfx Amsi Ri Ize Tob 2 pairs of warning boards, double LED illuminated and extendable up to 3,000 mm 2 x 7-pin swap-proof plugs at the front, with connecting cable Floor Gooseneck at front with steel/chequer plate covering Thereafter 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood plated Hydraulic activation via auxiliary drive on tractor unit with throttle, operation on front left side Hydraulic connection with SVK connector NW 10/3, including connection hose Operating Instructions A special permit is required for an axle load of 10,000 kg; only indivisible loads possible!!! The specified gross weight is technically possible; depending on the freight, the permissible gross weight may not be achieved while respecting axle, support and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Included Prepared for double-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova Grey 10-year warranty against rust-through Drawbar galvanised or black, at manufacturer’s choice Access ramps hot-dip galvanised

Stanje: novo, številka stroja/vozila: d9c951d746f03c05bc5470f89, lastna masa: 5 kg, največja dovoljena obremenitev: 29.045 kg, skupna masa: 35 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis Semi-trailer Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Vario-stake system 4 pairs recessed into the loading platform, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stakes can be locked every 100 mm within an internal width of 2,100 mm up to 3,000 mm. 4 pairs of divisible stakes (600 mm + 1,200 mm), total height 1,800 mm, removable. For inner stake width from approx. 2,350 mm: oversize. Vario front walls Floor prepped to fit 3 front walls. 4 x 5 pairs of Vario stake pockets for plug-in front walls (each front and rear) and 1 x 3 pairs central for transporting reinforcing mesh 2 x 5,000 mm or 2 x 6,000 mm. 2 pieces of Vario front walls, each comprising 1 pair of plug-in stakes and 1 upper crossbeam approx. 2,200 mm wide. Crossbeams can be extended by 220 mm on both sides, with lashing holes for tensioning. Height of Vario front wall approx. 1,900 mm, convertible to height 1,300 mm or 700 mm. 4 stake pockets centrally recessed in floor for 80 x 80 mm plug-in stakes 1 pair of lower supports for Vario front wall (front) 1 pair of lower supports for Vario front wall (rear) Outer frame slightly sloped with load-lock profile for attachment of lashing straps 14 extra pairs of lashing rings set into the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-sided operation, with straight base, no load equalizer Pull-out ladder at rear Wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter shell mudguards in front of and behind axle assembly With anti-spray mud flaps only on last axle Rear impact protection bumper 8 reinforcing mesh winches with wire rope and counter hooks, 4 left and 4 right, wire guided through the external frame, 1 detachable plug-on gear for reinforcing mesh winches (supplied separately, no bracket on frame) 1 spare wheel holder for 1 E-wheel, with wheel fastening kit 1 plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included) 1 stake storage box, closed but open at the top, below loading bed, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm Njdpfx Aei Ri R Dem Tslb 4 transverse lashing/stake rails recessed in the floor across the full width to the outer frame (max. usable interior width between outermost plug-in stakes approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, 60 mm distance between top and bottom (of the round steel). Bottom with angle steel edge, half open down. For lashing and plug-in stakes 80 x 80 mm. Note: Stake pockets/plug-in stakes are not designed for the sole securing of long goods, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, operated by braking 3x (Traction aid is active up to axle overload of 30% and a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake system, color-coded piping for easy service Spring-applied parking brake 2 non-interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, no connecting cable Note: The towed vehicle may only be towed by towing vehicles

Stanje: novo, številka stroja/vozila: 59ade5d1599dcdee29033ac46, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r19,5, Further Information Chassis semi-trailer for freight forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Full-width hook-in bar for aluminium ramps Frame in reinforced design for vehicle loading (up to the outer frame) Outer frame with load-lock profile approx. every 400 mm, for lashing strap hooks 10 pairs of lashing mushrooms recessed in the outer frame, each rated at 10 t 24 t two-speed landing gear with single-sided operation, half-round base and straight mounting plate, with compensating slide Folding rear support 2 wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray mud flaps behind each axle Pair of ferry lashing rings, yellow marked 1 spare wheel holder for 1 spare wheel, with wheel fastener kit 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) Container locks: 4 pairs recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, front-most position as flush fold-down lock 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm 10 stake pockets recessed centrally in the floor, internal dimension 70 x 40 mm 2 cross lashing/stake rails recessed in the floor across the full width up to the outer frame (max. usable internal width between outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spacing approx. 60 mm (between round bars). Lower side with angle bracket as a termination, half open downward. For lashing and fitting stakes 80 x 80 mm as per Fliegl data sheet, positions 2 and 4 20 plug-in stanchions, hot-dip galvanized Note: Stake pockets/plug-in stanchions are not suitable for securing long goods, pipes, etc. by themselves without lashings Storage space for aluminium loading ramps, ramps insertable from the rear 3 pairs of folding lashing rings, 10 t in the outer frame (1 pair in front of bulkhead, 2 pairs in rear area) Axles + Suspension SAF disc brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Nlodpfxeld Ihle Am Tjb 1st axle is an automatic lift axle, including forced lowering and start-off aid, activation via 3x braking (start-off aid operates up to an axle overload of 30% and up to max. 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage 2 ride heights, manually adjustable via rotary knob, 1 for 980 mm coupling height, 1 for 1100 mm coupling height (Note: Vehicle with inclined position) Braking System 2-line air brake system Color-coded airline routing for easy servicing Spring-actuated parking brake 2 front anti-mistake coupling heads, without interconnection line EBS, electronic braking system with EBS socket at the front, no connecting cable Attention: The trailer may only be towed by tractors that ensure ABS functionality! With lift & lower valve 2 ride heights, manually adjustable via rotary knob, 1 for 980 mm coupling height, 1 for 1100 mm coupling height (note: check total height, overheight is the customer's risk) Ride height in conjunction with lift axle: when lift axle is raised, loading and overall height increase by 50 mm (for Mega Flex only at low ride height or coupling height) Vehicle stability control system Wheels and Tyres 435/50 R19.5 manufacturer as per supplier's choice Steel rims, factory silver Electri

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34002026856, lastna masa: 5.592 kg, največja dovoljena obremenitev: 29.408 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 2.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: bela, Leto izdelave: 2020, Chassis Semi-Trailer Forwarding Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with replaceable 2" kingpin Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment Note! To attach straps in conjunction with drop sides, the side panels must be opened! Lashing rings for insertion in the "Load-Lock profile", each 6 t, loose 24 t 2-speed landing gear, operation from one side, with straight lower section, without thrust equalization Free pivoting radius to landing leg approx. 2200 mm, landing foot spacing approx. 2350 mm 2 wheel chocks with holders Aluminium side underrun protection Nedox Rq Slspfx Am Tslb Hot-dip galvanized steel rear underrun protection Quarter-shell mudguards in front of and behind axle assembly Spray suppression flaps on last axle only 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of stake pockets recessed at the very front in the outer frame/floor, 83 x 83 mm internal dimensions 2 plug-in stakes B=80 / D=80 / L=1200 mm, hot-dip galvanized Note: Stake pockets / plug-in stakes are not designed for sole load securing of long materials, pipes, etc. without lashing 4 pairs of ferry lashing eyes, marked yellow Axles & Suspension 3x BPW drum-braked axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Color-coded piping for simplified service Spring-loaded parking brake 2 reverse-polarity protected coupling heads at front, without connecting line Wabco Premium EBS, electronic brake system incl. EBS socket at front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be towed by tractors that ensure proper ABS function! With lift and lower valve Vehicle stability control system Electrics 24 Volt, multi-chamber LED lamps with resistor, lateral yellow LED lighting, number plate LED lighting (note! certain towing vehicles may display false diagnostics, even if all functions are intact) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin reverse-polarity protected sockets at front, without connecting cable Front bulkhead / corner stanchions 2 steel corner stanchions in volumetric version, 580 mm high, mechanism for side curtain release at bulkhead "Crash Blocker", lower interior with steel impact protection at approx. 140 mm height Insert slats Rows of wooden slats Tarpaulin Tarpaulin with welded-in horizontal and vertical belts Stainless steel tension fasteners Floor Approx. 30 mm thick phenolic resin boards on longitudinal beams, high point load resistance, suitable for forklift axle load up to max. 7100 kg Note: Floor warping due to weather possible (no warranty)! Rear wall / rear corner stanchions Rear corner stanchions made of steel up to lower edge of roof, curtain attachment via round pipe and tensioning ratchet Double-leaf rear portal doors, each with 2 internal locking rods Roof Sliding roof, tail-end liftable, sliding tarpaulin from rear to front, tarpaulin color: white Optimized drip rail at rear, upper rear wall hoop, above the doors Registration country / signage Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips acc. ECE R 048, white on sides, red at rear