Mol Mol, 3-Achser,Hydr. Rampen,Gelenkt,Verbreiterbar nakup rabljenega (38.102)

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) Nodpfx Amjxarmaebelb * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 27.760 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW axles * 1st axle liftable with traction aid ----Suspension: * Air suspension with automatic lowering during the tipping process (for increased stability; can be deactivated for overhead pavers) ----Electrics / Lighting: * Smart-Board (lift and lowering system, lifting axle lowering, traction aid, odometer, axle load indicator, ECAS, error memory reading) * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket Njdpfjw Eg Edex Ambjlb * Eco-LED II lighting with protective cover * 1 x additional LED work lamp * Flashing side marker lights ----General attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be unhitched when empty) * Enclosed plastic single mudguards * 4 m aluminium access ladder, stored on the right side over the mudguards * Folding underrun protection * Rear tow eye ----Chassis: * High chassis frame made of high-tensile fine grain steel, heavy-duty version ----Tipping body: * Semi-round steel rear tipper body, complete, made of STEELECT 450 steel -HBW 450- * Side walls with robust, continuous, inward-angled top belt * Outside access and aluminium platform in front of front wall ----Thickness of floor, side walls, front and rear wall: * Front and rear wall inclined * Front and rear wall 5 mm * Side walls 6 mm * Floor 8 mm, HBW 450 steel ----Hydraulic ram: * Front hydraulic ram with medium working pressure ----Hydraulic tailgate: * Overlapping hydraulic and swinging tailgate * Control of hydraulic tailgate via mechanical ball valve ----Tarpaulin: * Manual roll-up tarpaulin - RAL 9006 white aluminium ----Loading volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,340 mm * Laden approx. 1,330 mm ----Paintwork: * Chassis painted RAL 7021 black grey * Tipping body RAL 9006 white aluminium ----General information: * --Technical gross weight of up to 39,000 kg possible-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from week 11/2026

Stanje: rabljeno, prva registracija: 08/1998, skupna dolžina: 16.000 mm, skupna širina: 2.550 mm, Leto izdelave: 1998, GOLDHOFER STZ -TL 3 -33/80 3-osna polprikolica z upognjenim (labodjim vratom) SEMI, s 3 krmiljenimi osmi, z znižljivo ploščadjo in hidravličnimi rampami PRIKOLICA JE BILA PESPESKANA IN LAKIRANA!! • ABS Nljdpswpknwofx Ambeb • 3 x BPW ECO-Plus osi z zračnim vzmetenjem • 3 x krmiljene osi • Dvižno/spustno napravo • Hidravlične, dvodelne vzponske rampe • Hidravlično znižljiva ploščad • Razširljivo na 3 m širine • Opozorilne table • NATO vtikač za električno/hidravlično črpalko • Skupna dolžina: 16.000 mm • Lastna masa: 15.900 kg • Dovoljeno skupno maso: 48.000 kg (tehnično možno 48.000 kg) • Nosilnost: 32.100 kg • 4 x merilniki obremenitve osi • Dvojna pnevmatika: 235/75 R17,5 - Tehnični pregled in varnostni pregled: !! novo !! - Nemško vozilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, Leto izdelave: 2024, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading platform: - Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10° - A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick - Pneumatic locking with conical locking bolts and reinforced locking positions Nljdpoypb Akjfx Ambjb - Hardwood surface on the chamfer of the loading platform Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood inlay - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre pressure sensors Included Accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for hydraulic operations - 1 spare wheel - Outer beams on the gooseneck with fixing holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized - 2" kingpin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable galvanized outriggers, approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminium elements fitted on the extension pipes of the outriggers - Widenable U-profiles for inserting the ALU covers - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminium elements fitted on the extension pipes of the outriggers - 1 pair of mechanical rear supports - Remote steering control from both front and rear by cable remote control, with axle single-track alignment control - 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535 - Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame - Central lubrication system with 1 pump, BEKAMAX - Radio remote control for steering in addition to cable remote - Wabco Smart Board system - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 68.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 275/70-22,5, barva: črn, = Further Options and Accessories = - LED lighting - Air suspension Nlsdpoylvl Esfx Ambjb = Notes = Internal reference number for customer enquiries: 2-323 Pavic OptiPa HTA 27 68Z Air Suspension !!! IMMEDIATE AVAILABILITY !!! Stake body structure * 6x OPTIPA SL bunks or optionally 4x OPTIPA SL bunks * 12x OPTIPA AL10 stakes or optionally 8x OPTIPA AL10 stakes * 3x SAF 11t off-road axles * Wheelbase 3830 mm * Suspension air/air * Disc brakes or drum brakes * Twin tyres 12x 275/70R22.5 * Technical gross weight up to 33,000 kg possible! * Drawbar length adjustable * Chassis length approx. 6800 mm * LED rear lights * Unladen weight 4,600 kg * 2x shunting couplings at the rear * Front grapple with 20mm wire rope * Four welded lashing rings per side * Drawbar eye Ø 40 mm – optional Ø 50 mm * EBS braking system with Roll Stability Program Financing available through our financing partners. If you have any further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Additional Information = Tyre size: 275/70-22.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Steered Gross vehicle weight: 27,000 kg Body manufacturer: PAVIC short timber bunks OPTIPA SL General condition: very good Technical condition: very good Visual condition: very good

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 68.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 275/70-22,5, barva: črn, = Additional options and equipment = - LED lighting = Notes = Internal reference number for customer inquiries: 2-186 Pavic HTA 27 3-Axle Short Timber Bolster Trailer with Twin Tyres! LEAF SUSPENSION Pavic HTA 27 68Z 3-Axle Short Timber Trailer Twin Tyres: Bolster body * 4x OPTIPA SL bolsters, optionally 6x OPTIPA SL bolsters * 8x OPTIPA AL10 stakes, optionally 12x OPTIPA AL10 stakes * 3x SAF 11t off-road axles * Wheelbase 3830 mm * Leaf/leaf suspension * Drum brakes * Twin tyres 12x 275/70R22.5 * Technically possible gross weight 33,000 kg! * Adjustable-length drawbar * Chassis length approx. 6800 mm * LED tail lights * Unladen weight 4,600 kg * 2x shunting couplings at the rear * Front grapple with 20 mm wire rope * Four welded lashing rings per side * Drawbar eye ø 40 mm - optionally ø 50 mm * EBS braking system with roll stability program Financing possible through our financing partners. If you have any further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Nsdeylvikspfx Ambolb Tire size: 275/70-22.5 Brakes: Drum brakes Suspension: Leaf suspension Front axle: Steered Gross vehicle weight: 27,000 kg Body manufacturer: PAVIC Short Timber Bolster OPTIPA SL Overall condition: Very good Technical condition: Very good Visual condition: Very good

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 68.000 mm, širina tovornega prostora: 23.000 mm, vzmetenje: jeklo, velikost pnevmatike: 275/70-22,5, = Further options and equipment = - LED lighting = Notes = Nsdpfjylvavsx Ambolb Internal reference number for customer inquiries: 2-186 PAVIC HPA 27 68Z Trailer for Timber Transport Platform body with 12 stake pockets 8x ExTe telescopic stakes 3x BPW 10t axles Leaf/leaf suspension Drum brakes Twin tires 12x 275/70R22.5 Technical gross weight possible: 27,000 kg Unladen weight approx. 5,800 kg Length-adjustable drawbar Loading length 6,800 mm Financing available through our financing partners Our sales team will be happy to answer any further questions you may have. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Axle configuration Tyre size: 275/70-22.5 Brakes: Drum brakes Suspension: Leaf suspension Front axle: Steered Weights Unladen weight: 5,770 kg Payload: 18,230 kg Gross vehicle weight: 24,000 kg Functional Body manufacturer: PAVIC short timber platform type 144 Condition General condition: very good Technical condition: very good Visual condition: very good

Stanje: rabljeno, največja dovoljena obremenitev: 11.000 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2013, dolžina tovornega prostora: 5.000 mm, Interna številka: B - 08 Po naročilu stranke Obermeier * ECO Tip 100 * Tristrani prekucnik * Dvoosni * Široke pnevmatike * Nastavljiva vlečna kljuka * Dovoljena skupna masa 11.000 kg * V dobrem stanju Možna menjava staro za novo Financiranje od 3,99 % Pridržujemo si pravico do napak in vmesne prodaje! Podatki v tem oglasu so nezavezujoč opis in ne predstavljajo jamčenih lastnosti. Prodajalec ne prevzema odgovornosti za napake pri tipkanju ali prenosu podatkov. Oprema, navedena v oglasu, je predmet ločenega preverjanja. Vse informacije v oglasih so nezavezujoče! Dostava po celotnem območju Nemčije po dogovoru Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 Nlsdpfx Amoxvf U Aobsb Petek od 9:00 do 14:00 in po dogovoru!

Stanje: rabljeno, največja dovoljena obremenitev: 5.250 kg, skupna masa: 5.250 kg, konfiguracija osi: 2 osi, prva registracija: 02/2018, dolžina tovornega prostora: 4.000 mm, Št. int.: B - 10 Po naročilu stranke Blohmenröhr * Tristranski kiper * Dvoosna prikolica * Nakladalne rampe * Nastavljiva vlečna ojla * Dovoljena skupna masa 5250 kg * Nosilnost cca 2250 kg * Zelo dobro stanje Možnost vračila starega vozila Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so neobvezujoči opisi in niso zagotovljene lastnosti. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Oprema, navedena v oglasu, je treba posebej preveriti. Vse informacije v oglasu so neobvezujoče! Nlsdpfxexvf Szj Ambeb Dostava po celotni Nemčiji na povpraševanje Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: novo, največja dovoljena obremenitev: 28.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW axles * Lift axle with traction aid ----Suspension: * Air suspension with automatic lowering during tipping process (to increase stability, disconnectable for overhead paver) ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber tail lights with protective housing * 1 x additional LED work spotlight * Flashing side marker lights ----General Attachments: * Aluminum air tanks * Jost telescopic steel landing legs with plate foot (uncoupling only when unladen) * 4 m aluminum leaning ladder stowed on the right side above the mudguards * Closed single plastic mudguards * Folding underrun protection * Rear towing eye * Folding access ladder at the front left side * Document box on the front wall ----Chassis: Nsdexxf Twspfx Ambjlb * Chassis made of high-tensile fine-grain steel with Meiller-specific torsional cross members ----Tipping Body: * Semi-circular steel rear tipping body * Front wall with 600 mm front roof as tarpaulin support * Side walls with robust, continuous, inwardly sloped top rail * Front and rear walls angled ----Thickness of floor, side walls, front and rear wall: * Front wall: 4 mm BS 70 steel * Tailgate: 4 mm HBW 400 steel * Side walls: 4 mm HBW 450 steel * Tailored floor: 5 / 6 mm Hardox 450 steel ----Hydraulic Cylinder: * Front hydraulic cylinder with medium working pressure ----Hydraulic Rear Wall: * Overlapping hydraulic and pendulum rear wall. Control of the hydraulic rear wall via mechanical ball valve block ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminium- with switch on the chassis and remote control ----Loading volume: * approx. 25 m³ ----Fifth-wheel height: * Unladen approx. 1,247 mm * Laden approx. 1,217 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminium ----General Information: * --Permissible total weight of 39,000 kg technically possible-- * Subject to prior sale and errors * New vehicle with manufacturer’s warranty * Sample images ----Delivery time: * available immediately from Egestorf

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Nedpfxok Aht Uo Ambjlb Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Nedjl Sl Izspfx Ambjlb Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, barva: rjava, voznikova kabina: drugo, vrsta prenosa: drugo, Vehicle location: Bovenden, Body: 16 t skip loader system, for 3-axle truck (new stock) ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted! Njdpfei Rpdvsx Ambslb

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2012, barva: srebrn, voznikova kabina: drugo, vrsta prenosa: drugo, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2012, Vehicle location: Bovenden, steel body Body: Tipper bed for 4-axle chassis, WITHOUT SUBFRAME AND HYDRAULIC STABILIZERS! As-new condition from demo Mercedes-Benz Arocs, subframe and stabilizers available at an extra cost of €4,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Nsdpfx Amoi Rlgxsbslb

Stanje: novo, največja dovoljena obremenitev: 2.640 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.060 mm, širina tovornega prostora: 2.420 mm, skupna širina: 7.680 mm, skupna višina: 630 mm, Trailer for 20-ft Container * Trailer type: 20-ft container trailer !!! WITHOUT container !!! * Gross weight: 3,500 kg * Payload: 2,640 kg * Internal dimensions: L: 606 cm, W: 242 cm, H: 0 cm * External dimensions: L: 768 cm, W: 242 cm, H: 63 cm * Loading height: approx. 63 cm * Flooring: NONE * Side walls: NONE * Lashing points: 4 container locks * Frame: welded steel frame, hot-dip galvanized * Electrics: 13-pin, 12V * Tyres: 195/50R13C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 3x 1500 * Braked axle * Support wheel * 4 retractable crank supports Njdpfx Amjvkmk Ejbelb * Suspension: shock absorber chassis * Spare wheel * Rear extendable step Vehicle registration document (Fz-Brief) plus €219.00 All prices incl. 19% VAT. !!! WITHOUT container !!! Illustrations may not correspond to standard equipment; technical changes (e.g. tyre sizes) reserved. Delivery: Delivery by freight forwarding possible, €1.50 per km one-way Germany-wide (from Seesen to destination), minimum €270.00 plus VAT. Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.== .=.=.=.=.=.=. Here too you can order your custom trailer and accessories by arrangement: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.== .=.=.=.=.=.=., ?FINANCING OR LEASING POSSIBLE Images may not reflect standard specification; technical modifications (e.g. tyre sizes) reserved.

Stanje: rabljeno, največja dovoljena obremenitev: 18.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1991, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS * BPW axles ----Superstructure: Low-loader trailer (2200+6000 mm), loading height approx. 900 mm, rear end tapered, drive-on height approx. 750 mm, steel/wood floor, extendable to 3 m width, spring-assisted loading ramps, lashing rings. Nsdpfx Aewdb Ttombolb Sale only to traders. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, PARTICULARLY REGARDING EQUIPMENT AND ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see imprint for details).

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Nljdeya E A Nspfx Ambsb Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Nsdjmfqi Ijpfx Ambslb Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, največja dovoljena obremenitev: 30.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/1998, dolžina tovornega prostora: 12.120 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 30 m³, ? Crane semi-trailer ? 2nd and 3rd axle steered ? Rotating beacon ? Drum brakes ? Air suspension with lift axle ? 1 x storage box ? Support legs ? SAF axles Nledpjwqk R Iefx Ambsb All information without guarantee / Subject to prior sale.

Stanje: novo, največja dovoljena obremenitev: 11.400 kg, skupna masa: 15.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T009 Bale Trailer 3-Axle Platform Trailer Flatbed Trailer New Vehicle Year of Manufacture: 2026 Overall dimensions: 11990mm + 800mm x 2480mm x 2900mm Internal dimensions: 9300mm + 800mm x 2380mm x 1875mm Gross weight: 15,000 kg Unladen weight: 3,560 kg Payload: 11,440 kg Loading height: 1,160 mm Tyres: 500/50-17 Extendable loading platform Wide tyres Air brake system Load-dependent brake force regulator (ALB) Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading grids Y-drawbar 40 km/h road approval possible Mudguards Custom paint available !!! ATTENTION – PLEASE READ !!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. Nedpfxjtw N D Sj Ambjlb We strongly recommend inspection and verification to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are for illustration purposes and may show optional accessories at additional cost. The internal dimensions stated are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE DEALS AND SURCHARGE POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, Leto izdelave: 2022, VALTRA ZGORNJA VEZNA PALICA HIDR. KAT.3 (0010) Zgornja vezna palica SK hidr. Kat. 3/2/90 Nodpfx Asxpk H Dombjlb (0020) Zgornja vezna palica SK hidr. Kat. 3/2/90 (0030) z priključnim cevovodom

Stanje: rabljeno, največja dovoljena obremenitev: 2.474 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, prva registracija: 01/2022, naslednji pregled (TÜV): 10/2025, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 50 mm, skupna širina: 2.250 mm, skupna višina: 930 mm, Leto izdelave: 2022, Temared Car Transporter Car transporter Transport trailer Vehicle transporter First registration: 01/2022 Valid inspection (TÜV): 10/2025 Overall dimensions: 9760 mm x 2250 mm x 930 mm Internal dimensions: 8,000 x 2,000 mm x 50 mm Gross weight: 3,500 kg Unladen weight: 1,026 kg Payload: 2,474 kg Tri-axle Winch 13-inch tyres 100 km/h approval Bolted and galvanised chassis Steel loading ramps V-drawbar, hot-dip galvanised 13-pin connector Automatic jockey wheel Anti-sway coupling Telescopic rear supports Spare wheel holder Rental possible. ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to prior sale as this item is also listed on other platforms. We highly recommend inspection and testing to avoid any misunderstandings regarding the condition and suitability. Viewing and testing are possible at any time by appointment and are expressly encouraged!!! The specified internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Business hours: Monday–Friday 9:00 am to 5:00 pm, Saturday 9:00 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Legal notice: Pegasus Anhänger Schnee GmbH Am Sinnerhoop 17 Nsdporx Nv Dsfx Ambelb 58285 Gevelsberg Tel.: Fax:

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° Nedpfx Aetvfkfsmbjlb - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V Nljdpol Tlhrsfx Ambob * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf