Lecitrailer Plateau Twistlocks nakup rabljenega (405)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.640 kg, skupna masa: 40.000 kg, prva registracija: 02/2023, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R 19,5, barva: siv, Leto izdelave: 2023, 3-axle Mega Flatbed Semi-Trailer HeavyTrailer Gross weight: approx. 40,000 kg Fifth-wheel load: approx. 16,000 kg Axle load: approx. 24,000 kg Unladen weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle width: 2,540 mm Coupling height: approx. 980 mm / 1,100 mm Loading height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous cross members - Wide underrun neck approx. 700 mm - 6 pairs of lashing rings (2,000 kg lashing capacity), welded into outer frame - 6 pairs of stake pockets (80 x 50 mm) in outer frame - 6 pairs of stake pockets (80 x 50 mm) inside on the longitudinal beam Bledpfov Darpex Amtoi - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing rings (5,000 kg lashing capacity), welded into outer frame - Front wall approx. 2,000 mm high, with sheet metal cladding, bolted design - Large, edged premium rear lamp panel - Rear underrun protection, welded version (rectangular tube) - Side underrun protection, both sides Support Legs - 24 t telescopic landing gear, single-sided operation, half-moon with base plate Axles/Suspension - 3 axles à 8 t (technically 9 t), disc brakes - Second ride height: Button for 2nd ride height at bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total stroke approx. 300 mm - Lifting and lowering device with 1 rotary slide valve - Holder for lifting/lowering device, bolted version - 6 tyres 445/45 R 19.5 - Wheel mounting via center centering Brakes - Dual-circuit compressed air brake system according to EC Directive 71/320 - With double eyelet valve for brake and spring brake - Test nipple for brake cylinder pressure at front right brake cylinder - Each coupling button red and yellow - Lifting/lowering device mounted at rear left in direction of travel - 2 x approx. 80 l air tanks in steel, painted black (1x brake, 1x lifting/lowering) Lighting System - Lighting system 24 Volt with large multifunction lights - Side marker lights (LED) with reflector - Front position lights, lower, white, one each on left and right - 15-pin plug and socket at front - EBS socket - License plate lighting Floor - 28 mm hardwood floor with galvanized omega steel profiles - Hardwood floor screwed onto the cross members - Omega profiles bolted to head frame Painting - KTL with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau Accessories - Contour marking for flatbed vehicles - Front wall up to 2,000 mm high, with sheet metal cladding, plug-in type - Bracket for rotating beacon at rear - SmartBoard - ECE marking plate at rear - 4x warning signs, extendable - Access ladder rear right, foldable and extendable at rear - 2x wheel chocks with holder - 2 rubber bumpers at rear corners - Mud flaps at rear - Plastic fenders with anti-spray mud flaps - 4 pairs of container locks with retractable twistlocks, recessed into the floor, including additional cross members - Suitable for accommodating 1x40' and 2x20' containers - Open mesh box longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanized, bolted

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 601.974 km, moč: 338 kW (459,55 KM), prva registracija: 09/2009, vrsta goriva: dizel, konfiguracija osi: 6x2, gorivo: dizel, barva: drugo, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, dolžina tovornega prostora: 10.500 mm, Leto izdelave: 2009, Tailgate Platform length: 50 cm = Further Information = General Information Cab: single License plate: 2GBL187 Technical Information Engine displacement: 12,902 cc Axle Configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires; Lift axle Weights Empty weight: 15,725 kg Payload: 275 kg gross vehicle weight (GVW): 26,000 kg Max. towing capacity: 29,500 kg Functional Extendable body: Yes Blodpfx Amoy Umu Detsi Layout Number of beds: 1 Condition Technical condition: very good Visual condition: very good Financial Information Price: On request = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are excluding VAT. No rights can be derived from the given information. Office Phone: Mobile: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber). Mobile: Dutch (Available on WhatsApp and Viber). When paying by bank transfer, please ensure the funds are transferred to our bank account below. Always verify the payment details as stated on our website. If you have received other information, please contact us. If you have any doubts, call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WEB TRAILER PRSH 27 PLATFORM with Hardwood Floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Driving height: 1,280 mm with 1,150 mm fifth wheel height Spring center approx. 1,300 mm Fifth wheel load max. approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents available Chassis: Chassis made of welded longitudinal beams and through-bolted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the grooves in the outer frame, each rated at 5t!! Landing Gear: 24 t telescopic landing legs from brand manufacturer (Jost/SAF) Axles: Brand manufacturer (SAF/BPW/JOST) 9 t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (option) Axle spacing approx. 1,310/1,310 mm Brakes: EBS braking system by Knorr or Wabco Air connections with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve (Knorr/Wabco) Air tanks 2 x approx. 80 l Tire pressure monitoring Lighting system: LED 15-pin front connection Flashing side marker lights Tyres: Blodog Dkx Ejpfx Amtei Premium brand tyres 385/65 R 22.5 on steel rims Bodywork: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted construction Floor: Weatherproof 28 mm hardwood floor alternately with galvanized omega steel profiles Hardwood planks bolted onto cross-members (optional double bolting) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium, large, and edged rear lamp bracket Welded underrun protection (rectangular tubing) Rear access ladder, right side, foldable and extendable with platform Two wheel chocks with holders, plastic or galvanized Plastic mudguards 180° over each axle Side underrun protection on both sides — aluminum or plastic profile Coating: Chassis painted in RAL 9005 or Novagrey 7350 Other colors at extra cost (subject to powder availability) KTL coating with zinc phosphating plus powder, highest corrosion protection Hot-dip galvanizing (optional) Ex-works price Attention!!! Pictures show special equipment. Get professional advice and a free, non-binding offer. Leasing, financing, or hire purchase available! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Subject to prior sale and errors!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVJS1339PH522406, lastna masa: 8.520 kg, največja dovoljena obremenitev: 30.480 kg, skupna masa: 39.000 kg, prva registracija: 01/2024, dolžina tovornega prostora: 13.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, barva: rumena, Leto izdelave: 2024, Oprema: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL PLATFORM SEMI-TRAILER RH230 - forced-steered Vehicle identification number: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle group load (technical): 27 t Kingpin load (technical): 12 t Bsdpfoxq S H Ijx Amtsli DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Overall width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm FRAME - welded steel frame construction - reinforced for 20 t load concentration over 4 m loading length - frame height at front approx. 230 mm - interchangeable 2" kingpin - frame for unladen fifth wheel height approx. 1,120 mm to 1,200 mm with air-suspended tractor unit - 4 mm perforated outer frame with hole spacing approx. 100 mm, elongated hole 50/30 mm, for lashing, 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed in floor, foldable, also can be folded outward - 8 pairs of box section inserts with plug-in fixtures for 80x80 mm stanchions, both sides of the outer frame - 6 box section inserts with plug-in fixtures for 80x80 mm stanchions, across entire width, max. tensile force 2000 daN AXLES - BPW EcoDisc axles with disc brakes ø430 mm (22.5'' disc) - Load capacity 9 t/axle, on-road version - 1st axle rigid - 2nd and 3rd axle with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Self-acting forced steering, front fifth wheel turntable with steering wedge - Transmission via two steering rods, axle mounting at rear with bogie - Central lubrication points for steering at front fifth wheel turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on load, start-off aid with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensing - RSS/RSP stability program - Spring brake parking brake on 2 axles - Aluminium air reservoirs - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at front - Air suspension with lift/lower function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for display in the driver's cab - Wabco SmartBoard for reading data via display (mileage, axle group load, brake diagnosis, etc.) FLOOR - 27 mm phenolic plywood floor with steel hat-profile rails over the longitudinal members - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift guard rail bolted both sides to the outer frame - Aluminium forklift guard rail at rear crosswise - Closed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, for loads up to approx. 1 t, asymmetrical with doors on both sides - Galvanised steel toolbox / lid painted in single colour - 8 removable hardwood cross beams approx. 100/100 mm, with steel edging, can be fixed in plug-in fixtures in the outer frame Very good condition, German registration papers, immediately available.

Stanje: rabljeno, barva: rumena, Leto izdelave: 2002, Renders TAN 4-2L. Jahr: 2002. 10 t BPW-Achsen. Leergewicht: 8.625 kg. Max. Gewicht: 24.000 kg. 2. Achse Liftachse. Luftfederung. Twistlocks. Bljdsy S Sibjpfx Amtei ABS. Maße Ladefläche: L: 7.000 mm. B: 2.550 mm. H: 950 mm. Heck des Aufliegers ausziehbar. Reifen: 235/75R17,5 50%. Deutscher Anhänger! ID NR: 618. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, alle abgeschlossenen Verträge sowie die ihnen vorausgehenden Verhandlungen. Durch jegliche Form der Reaktion akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2002 Leergewicht: 8.625 kg Nutzlast: 15.375 kg zGG: 24.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 319.000 km, prva registracija: 07/1997, vrsta goriva: dizel, skupna masa: 6.000 kg, gorivo: dizel, število prestav: 5, število sedežev: 7, Leto izdelave: 1997, Oprema: kabelska vitla, vlečno vozilo z drsno ploščadjo, vilicami in vitlom... vse deluje brezhibno... ploščad Falkom... Blsdpjy Ti T Tsfx Amtoi Vozilo vozi odlično... 4,2-litrski motor z dvojno baterijo....

Stanje: novo, številka stroja/vozila: AHW BJT 476-6024-35-3-12, lastna masa: 975 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.430 mm, Pri ANHÄNGERWIRTZ je na spletu na voljo veliko prikolic Brian James. Priročen in neprekinjen spletni nakup na trailershop de. Prikolico prevzamete sami ali si jo daste dostaviti. Spletna prevzemna točka za vaš novi priklopnik ponuja vrhunske blagovne znamke! Več kot 850 novih prikolic na zalogi. Več kot 130 rabljenih prikolic stalno v ponudbi. Nezavezujoč primer: Iz našega razstavnega prostora – samo dokler zaloga zadostuje! Platforma Connect 23 Multifunkcijska prikolica CarGO Connect 600x243cm, 3500kg, triosovinski visokonakladni priklopnik z ALKO nizkim okvirjem V-podvozje, 12" pnevmatike, pocinkana perforirana jeklena nakladalna površina, zaprta z večslojno ploščo, bočna zaščita blackline, montirana rezervna guma, LED osvetlitev in pozicijske luči, zaklepna sklopka, visokokakovostno podporno kolo... dokler traja zaloga! Prodaja in telefonsko sprejemanje naročil v naslednjih urah: PON. - PET. 08.00-12.30 & 14.00-18.00 ali neprekinjeno prek naše spletne trgovine trailershop. Avtorske pravice – zaščita blagovne znamke 06/26 Št. artikla: 476-6024-35-3-12 Blodpfxoy Dvips Amtji

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 583 kg, največja dovoljena obremenitev: 2.117 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 2.110 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, MARTZ GT Plattformanhänger 400/2 2,7T NEUFAHRZEUG Bjdpfx Aoxp U A Aemteli Innenmaße: 406cm x 211cm Gesamtgewicht: 2700kg Nutzlast: 2117kg Gebremster Tandemanhänger Auflaufbremse und Handbremse von KNOTT 2x 1350kg Achsen mit Bremse inklusive Rückfahrautomatik Tiefbettfahrgestell Geschraubter, feuerverzinkter Stahlrahmen Stahlrampen im Schienenkanal Stützlast Mehrere Zurrösen über die gesamte Länge Verstärkte 10-Zoll-C-Bereifung mit Stahlventil M+S Reifen 13-poliger Stecker Begrenzungsleuchten vorne Rückleuchten inkl. Rückfahrlicht, Nebelschlussleuchte (NSL) und Dreieckrückstrahler Leuchten und Kennzeichenhalter abklappbar Seilwinde mit Bremse und Halterung 2x Unterlegkeile 15mm starker, robuster und rutschfester Siebdruckholzboden OPTIONALES ZUBEHÖR – DAUERHAFT PREISGESENKT AB FEBRUAR 2026 -Ausrüstung für 100km/h (Stoßdämpfer) -Ersatzrad mit Halter -Komplette LED-Beleuchtung -Diebstahlsicherung -Tausch Stahlschiene gegen Aluschiene -Tausch 10"-Bereifung gegen 13"-Bereifung -Radstopper -Klappbare Kurbelheckstützen -Anti-Schlingerkupplung -Seitenreling -Alubordwände 30cm -Aluaufsatzbordwände 30cm -Hochplane 150cm -Radstopper über gesamte Breite Weitere Ausstattungen auf Anfrage! Zzgl. Fracht bis Gera und Fahrzeugpapiere 250 € netto Abbildungen beispielhaft, können aufpreispflichtiges Zubehör zeigen. Haben Sie den passenden Anhänger nicht gefunden? Wir haben 50–100 Fahrzeuge ständig verfügbar und sofort abholbereit auf Lager. Unsere Werkstatt ist Werktags von 8:00 – 17:00 Uhr für Reparaturen aller Art geöffnet. Spezialist für Achsreparaturen – auch an Wohnanhängern. Zusätzlich bieten wir ein großes Sortiment an Ersatzteilen und Zubehör, auch für Anhänger verschiedenster Hersteller. Außerdem haben Sie bei uns eine große Auswahl an Mietanhängern. Besuchen Sie uns online oder kommen Sie direkt vorbei!

Stanje: dober (rabljeno), prevoženi kilometri: 293.139 km, moč: 177 kW (240,65 KM), prva registracija: 05/2011, vrsta goriva: dizel, velikost pnevmatike: 285/70 R19.5, stanje pnevmatik: 80 odstotek, konfiguracija osi: 4x2, medosna razdalja: 5.600 mm, gorivo: dizel, barva: drugo, voznikova kabina: dnevna kabina, število prestav: 6, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, število sedežev: 2, dovoljena osna obremenitev (os 1): 5.800 kg, dovoljena osna obremenitev (os 2): 10.900 kg, Leto izdelave: 2011, Oprema: ABS, električno nastavljivo ogledalo, električno upravljanje oken, meglenke, zapora diferenciala, žerjav, = Dodatne možnosti in oprema = - 2 osi - 4x2 - Omejevalnik hitrosti - Zračno vzmetenje - Parabolské vzmeti - Radio - Opozorilna luč - Zapora diferenciala - Kardan = Opombe = Dvigalo Delovne ure: 1695 ur Število hidravličnih izvlekov: 4 Število podpornih nog: 2 Daljinsko upravljanje: ✓ Kavelj za tovor: ✓ Rotator: × Squeeze-Box: × Vitlo: × Paletni kavelj: × Bjdjy Rh Spjpfx Amtjli Doseg (metri): 12 m Nosilnost (kg): 5360 kg = Dodatne informacije = Splošne informacije Število vrat: 2 Kabina: FL, enojna Tehnične informacije Število valjev: 6 Prostornina motorja: 7.146 ccm Dovoljena skupna masa: 16.000 kg Pogon Znamka motorja: VOLVO Konfiguracija osi Dimenzija pnevmatik: 285/70 R19.5 Globina profila pnevmatik: 80% Sprednja os: maks. obremenitev: 5800 kg; vodena Zadnja os: dvojna montaža; zapora diferenciala; maks. obremenitev: 10.900 kg Funkcionalno Dvigalo: PALFINGER PK9002EH-C (4x) + RADIO, letnik 2011, za kabino Stanje Tehnično stanje: dobro Vizualno stanje: dobro

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 5.840 kg, največja dovoljena obremenitev: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 03/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, Leto izdelave: 2011, LAG plato z dno iz trdega lesa, opremljen za izredne prevoze. Bedpfx Aey N Slqemtjli

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2005, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, skupna višina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, barva: drugo, Leto izdelave: 2005, Oprema: ABS, = Additional options and accessories = - EBS = Remarks = Bsdpey Atkusfx Amtoli Number of axles: 3, Unladen weight: 6,840 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2005, Axle type: BPW = Further information = General information Cab: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 2 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 3 mm Axle 3: Steering; Tyre tread left: 2 mm; Tyre tread right: 8 mm Weights Unladen weight: 6,840 kg Payload: 32,160 kg Gross vehicle weight: 39,000 kg Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good pricing • Proper trading conduct • Multilingual team • We understand our customers • Assistance with import and transport • (Export) registration handled quickly • Expert technical services • The security of 'recognizable quality' • And much more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty packages.

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area: • Extendable cargo area with pneumatically operated locking mechanism • Cargo platform with approx. 30 mm thick timber flooring • 7 pairs of external folding lashing rings (LC 5,000 daN) • 3 pairs of external folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydromechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with lift and lower valve • Axle tool kit • Tyres: 385/65 R 22.5 • TPMS tire pressure monitoring system compliant with ECE R 141 Brake System: • WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical System: Bsdpfx Ameiu Etrjtjli • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets • Connections as per ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Standard Accessories Included: • Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring • 4 wheel chocks with holders mounted on the front wall • 2" king pin • One galvanized steel front wall, approx. 1,600 mm high • Yellow-red air couplings at the galvanized front connection strip • White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red • European reflective plates (red-yellow) at the rear of the trailer • One mud flap at the rear of the trailer • Operating manual and instructions • Mount for a revolving beacon at the rear of the trailer • Cargo area with approx. 30 mm thick timber floor inset in omega profiles • 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed • 1 spare wheel holder under the cargo area, right-hand side in the direction of travel • Electro-hydraulic unit • At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket • Coated sand layer on the main beam as anti-slip protection • 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container • 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm • Access ladder mounted on the right side in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel • BEKAMAX (Pico) centralized lubrication system with removable pump guard • Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status • Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring • Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light • Bracket for revolving beacon on the warning signs • 80 km/h speed sticker on rear and both sides • Load gauge for axle load determination, including load chart • HRM (High Resistance Metallisation) of the outer frame • Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction Bedpfx Amol Ux Rwoteli - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Bodpfx Amek Eammotsli Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear Blsdpfx Ashlz Shsmtei European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform: - 2 pairs of folding external lashing rings (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), lift/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system compliant with EU regulations featuring EBS-E (2S2M) Paintwork: - Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paintwork not possible Steel Construction: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting: 24 volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets - Connection standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall approx. 1,600 mm high, EN12642-XL - White reflector tape according to EU regulations, lateral and rear red - European reflective panels (red-yellow) at the rear of the trailer - Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles - 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame - 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes - Bracket for 1,000 mm plug-in stakes, rear in the central beam - 1 spare wheel carrier under the loading platform on the right hand side - 1 mudflap at the rear of the trailer - Manual and description on USB stick - Bracket for beacon at the rear of the trailer - Holders for warning signs including socket at the gooseneck and left/right rear panel - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and both sides Bledpfx Amjiu Etketoi - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load diagram - HRM (High Resistance Metallisation) of the outer frame - Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Blodpsikyh Hefx Amtji Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle Blodpfjiuy Nlox Amtsi - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light Bledoi Dwlwopfx Amtji - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of vehicles available immediately or at short notice on our website. Excerpt of equipment. Full equipment details available upon request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform including sloped frame, corners beveled * Approx. 5,350 mm = low-bed platform – flat loading area * Approx. 850 mm = rear ramp slope * Overall width: approx. 2,550 mm (or approx. 3,000 mm with extensions) * Loaded loading height: approx. 870 mm * When assembling tractor-trailer combinations, compliance with the legally permissible overall height and train length must be observed! Chassis/Frame: * Steel welded construction with front frame cranking and rear bevel * Ramp slope with excavator bucket recess in the center = rear depression between longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 5 pairs of approx. 4 t lashing lugs (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out lashing rings, approx. 10 t (4x low-bed, 1x on ramp slope, 2x on raised platform) * Standard ball bearing slewing ring Frame attachments: * Both sides of the low-bed platform equipped with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery being transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arrangement: 1 pair at the front of the raised platform inside longitudinal beams, 1 pair right and left in the excavator bucket recess at the far rear, 1 pair at the front of the raised platform before the frame cranking, inside beams, 1 pair at the rear of the low-bed before the ramp slope in the bucket recess, left + right Towing device: * Fixed tow bar with swivel coupling eye approx. 40 + 50 mm, cranked design, silent bushing mounting, tow bar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Tow bar length approx. 1,800 mm Support equipment: * 2 automatic folding support legs at the rear Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires, size 235/75 R 17.5, 141J, brand as per factory selection Brake system/Suspension: * Brake system according to ECE regulation R13 * Two-line air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle equipped with sensors * RSS/RSP Stability Program * Spring-loaded parking brake on 2nd and 3rd axles * Brake/air connection lines with 2 separate couplings (yellow/red) * EBS/ABS connection cable Blsdjy Aug Ropfx Amtji * Air suspension with lift/lowering function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle bump stop on the front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in the driver’s cab (truck must be prepared accordingly, not a calibrated scale) * Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels, for display in the cab (display, etc. must be present in the tractor unit) Floor: * Approx. 50 mm softwood flooring, impregnated, protruding approx. 5–10 mm above the top edge of the frame * Steel chequer plate covers over the wheels Ramps: * 2 foldable, one-piece lightweight steel loading ramps, approx. 2,800 mm long, approx. 750 mm wide, with 35 mm

Stanje: novo, največja dovoljena obremenitev: 30.860 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpts from the equipment specifications. Full equipment details available upon request. Chassis: * Steel welded construction with front frame cranking, chamfered front corners, and rear chamfer, drive-up slope with centrally located excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x at the front cranked slope, 3x in the low bed between the wheel recesses, 1x on the drive-up slope) 2 Pairs of Wheel Recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the cranking, including one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between 3rd and 4th axle, including one-piece drive-over aluminium cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer beam spacing) Frame Attachments: * 5 pairs of stake pockets in the outer frame for rectangular tube stakes approx. 100 x 50 x 5 mm (3x in the low-bed, 2x on the raised platform) * Low-bed platform with extendable width extensions on both sides with softwood planks approx. 50 mm (the track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distributed as follows: 1 pair at the front on the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the cranking inside the longitudinal beams, 1 pair at the rear of the low-bed before the drive-up slope in the excavator bucket recess left and right Towing Device: * Fixed towing drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height from approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support Device: * 2 hydraulic rear supports, operated individually, controls housed in a separate stainless-steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake System/Suspension: * Brake system per ECE regulation R13, two-line pneumatic system * Brake system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed * RSS/RSP – stability control programme * Spring-loaded parking brake on the 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air connection lines with two separate coupling heads, yellow/red * EBS/ABS connection cable * Tension rubber as holder for EBS and electrical connectors * Air suspension with lift and lowering device, operated separately at front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Bodpoy Auhnsfx Amtjli Floor: * Softwood floor, approx. 50 mm, impreg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2003, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.900 mm, skupna širina: 2.540 mm, skupna višina: 2.600 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, barva: drugo, Leto izdelave: 2003, Oprema: ABS, = Additional Options and Accessories = - EBS (Electronic Braking System) - Alloy wheels = Notes = Number of axles: 3 Unladen weight: 7,110 kg Gross weight: 39,000 kg Chassis type: Full chassis Chassis material: Steel Kingpin size: 2 inch Alloy wheels Suspension type: Full air suspension ABS EBS Body year of manufacture: 2003 Axle type: BPW = Further Information = General Information Cab: Day cab Bedpoyu Hz Nefx Amtjli Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 3: Steering; Tyre tread left: 8 mm; Tyre tread right: 6 mm Weights Empty weight: 7,110 kg Payload: 31,890 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-moving inventory • Recognizable quality • Competitive prices • Correct business practices • Multilingual staff • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more… Visit our website for special offers and a complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 05/2005, dolžina tovornega prostora: 12.150 mm, širina tovornega prostora: 2.500 mm, skupna dolžina: 12.400 mm, skupna širina: 2.500 mm, skupna višina: 2.600 mm, vzmetenje: zrak, velikost pnevmatike: 425/65R22,5, barva: drugo, Leto izdelave: 2005, Oprema: ABS, = Additional Options and Equipment = - EBS = Notes = Number of axles: 2, Unladen weight: 7,200 kg, Gross weight: 38,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2005, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Bodpfxoyupans Amtjli Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 425/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 4 mm Axle 2: Steered; Tyre tread left: 12 mm; Tyre tread right: 12 mm Weights Curb weight: 7,200 kg Payload: 30,800 kg Gross vehicle weight: 38,000 kg Functional Loading height: 158 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simply! • Large, rapidly changing inventory • Recognizable quality • Good prices • Proper business practice • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates quickly arranged • Expert technical services • The security of recognizable quality • And more.... Please visit our website for special offers and our full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Directly inquire about our European warranty package.

Stanje: rabljeno, številka stroja/vozila: SKBD20S20HKE20608, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2018, = Dodatne možnosti in oprema = - Zadnje zračno vzmetenje - Sprednje zračno vzmetenje - Bobnasti zavorni sistem = Dodatne informacije = Teže Lastna teža: 4.570 kg Nosilnost: 15.430 kg Skupna dovoljena teža: 20.000 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Optično stanje: povprečno Dodatne informacije Bedpfx Ameykh Rkstsli Stanje sprednjih pnevmatik: 50 Sprednje pnevmatike: 235/75 22.5 Zadnje pnevmatike: 235/75 22.5 Zadnji pregled: 2025-10-20 Dodatne informacije Za več informacij kontaktirajte Lastas prodajo.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2009, barva: drugo, Leto izdelave: 2009, Os 1: leva 8 mm desna 8 mm Os 2: leva 8 mm desna 12 mm Os 3: leva 8 mm desna 10 mm Imamo možnost zlaganja prikolic! = Več informacij = Lastna teža: 7.340 kg Blodpfxsy A Rqxe Amtji