Knapen Polpriklopnik S Premičnim Dnom nakup rabljenega (54.562)

Stanje: rabljeno, največja dovoljena obremenitev: 27.000 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2015, naslednji pregled (TÜV): 05/2026, skupna širina: 2.550 mm, Oprema: ABS, Nemška polprikolica Crsdpjym Hypsfx Am Ssc 1 lastnik Walking floor Hidravlična zaščitna ponjava nad polprikolico Hidravlična zadnja vrata Dvižna os

Stanje: rabljeno, največja dovoljena obremenitev: 29.560 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Leto izdelave: 2025, Oprema: ABS, Stock no. 5768 Approx. 60m³ Stas Agrar Moving Floor Trailer with Grain Hopper / Radio Remote Control / Rental Option Available! ---- * Manufacturer: Stas * Model: Farmstar - Agricultural Moving Floor * First Registration: 09/2025 * Gross Vehicle Weight: 36,000 kg * Unladen Weight (per registration documents): 6,440 kg * Payload: 29,560 kg * Axles: 3x Jost axles / 1st axle with lift function & start assist / disc brakes * Suspension: Air suspension with raise/lower function * Tyres: 385/65 R22.5 with Alcoa matte aluminium rims, approx. 50% * EBS * Colour: Chassis RAL 9005, Body RAL 9010, Tarp SIO 601 Opal Green * Capacity: approx. 60m³ (10.60m length x 2.55m width x 2.30m height) * TÜV: 09/2026 * CARGO FLOOR CF 500 SL-C with radio remote and control panel on left side in front of axles * 21-slot floor slat system, 6mm ribbed * Welded aluminium end caps * Rear closure plate made of aluminium * Integrated grain hopper * Additional guides below the floor slats * Complete emptying wall with brushes and stainless steel handles * Front wall made of aluminium plank profiles * Service door in the front wall * Side walls with smooth finish inside/outside for grain transport, fully welded * Inspection window at rear left side wall * Swing doors (50/50) * 4x locking rods * 2x sample hatches (left and right) * Swingable rear cross beam above doors * Operating platform with access steps front left and right * Fifth wheel height: 1,150mm * Single mudguards * Full load supports (aluminium drop supports) Crodpfxoywq Rbj Am Soc * Roll tarp (680g/m²) with quick-lock system * Foldable aluminium roof bows * Foldable aluminium rear light protection * Aluminium air reservoirs * Tool box on the right * Shovel and broom holder on the left * 1x 2.50m aluminium extension ladder, right side * 1x extendable ladder at rear right * Smartboard * TPMS tyre pressure monitoring system * LED rear lights ECOLED III * 1 owner German trailer! German documents! Rental Option Available! Note on possible errors in this listing: Despite careful preparation, errors may accidentally appear in the description or details. No liability will be assumed for mistakes, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or if you have further questions.

Stanje: rabljeno, lastna masa: 8.270 kg, največja dovoljena obremenitev: 27.730 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2021, naslednji pregled (TÜV): 03/2026, prostornina tovornega prostora: 92 m³, skupna dolžina: 14.040 mm, vzmetenje: zrak, barva: zelen, vrsta prenosa: mehanski, Oprema: ABS, Nezavezujoča ponudba – pridržujemo si pravico do sprememb in vmesne prodaje – prodaja poteka brez vsakršnega jamstva – vsi podatki brez garancije! Crjdpfxsynkmie Am Sec

Stanje: rabljeno, največja dovoljena obremenitev: 28.070 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 08/2026, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Knapen Moving Floor Trailer K100 92m³, 10mm Floor General Information Manufacturer: Knapen Trailers • Model/Type: K100 A5060 • Year of Manufacture: 2020 • Chassis Number: XPNK0C100LD071956 202003-0071956-r_order-configur? • Registration Country: Germany • Unladen Weight: approx. 7,924 kg 202003-0071956-r_order-configur? • Gross Vehicle Weight Rating: 36,000 kg 202003-0071956-r_order-configur? • Max Axle Load: 24,000 kg • Max Fifth Wheel Load: 12,000 kg (permitted in registration country) • Capacity: approx. 91.9 m³ • Tapered moving floor semi-trailer • Axle configuration: rigid/rigid/rigid ----Dimensions • External length: 13,670 mm • External width: 2,550 mm • External height: 4,000 mm • Internal height front: 2,690 mm • Internal height rear: 2,785 mm • Saddle height: 1,150 mm • Kingpin to 2nd axle: 7,750 mm • Axle spacing 1st–2nd axle: 1,310 mm • Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear • 3 x SAF 9 t Intradisc+ Integral CD Off-Road axles • All axles rigid • Disc brakes Ø 430 mm • 10-hole wheel connection • Air suspension with standard control console, left in front of the axles • 1 lift axle, fully automatic via EBS • Including starting aid (3x brakes) Crodpsymhxgjfx Am Sec • Remote control for lift axle ----Tyres & Wheels • Goodyear KMAX T • Tyre size: 385/65 R22.5 • Steel wheels 22.5" x 11.75 • 6 wheels total • No spare wheel ----Body • Closed side walls left and right • Moving partition (minimum ground clearance 100 mm) • Rear doors with external locking bars • One locking bar per door • Top rail made of steel, swing-out left and right • Front wall platform • Ladder on front wall left and right • Standard hoops, Ø 60.3 mm (4 pcs) • Hoop compartment: 3 x approx. 4,100 mm • Tarpaulin 680 g/m² (RAL 9006 White Aluminium) • Tarpaulin supports, 3 positions (4 pcs) • Lashing straps (4 pcs) ----Floor / Moving Floor • Cargofloor system CF-500 SL-C • Electric control • Corrugated aluminium floor planks 10 mm (21 planks) • Fixed front plate • Stainless steel plate at the rear under the floor ----Attachments • JOST landing legs with thrust compensation • Plastic toolbox left in front of the axles (1000 x 500 x 500 mm) • 30 l water tank with soap dispenser • Closed side underrun protection • Pendulum mud flaps • Anti-spray mat on 3rd axle • Long staircase with extendable rear stairs and platform • 2 x wheel chocks, left • Broom and shovel holders, right ----Lighting • 6 x round LED tail lights (3-chamber) • LED fog and reversing lights • LED side marker lights (4 pairs) • LED marker lights at the rear • Reflective contour marking according to EU regulation • LED work lights at the rear (remote controlled) • LED work lights at the landing legs (remote controlled) • LED LCG-2 switch unit ----Hydraulics / Connections • ISO-N and ISO-S couplers + 15-pin plug • Remote control Knapen Trailers V1 • Hydraulic connections central at front wall (vertical) • Pressure line left, return line right • Additional hydraulic connections at the landing legs • Brake connections available • Acoustic reversing signal (manual adjustment) ----Paintwork • Body in RAL 7011 Iron Grey • Wheel hubs in RAL 2008 Light Red Orange • Chassis and underside unpainted If you require further information, please do not hesitate to contact me.

Stanje: rabljeno, lastna masa: 7.920 kg, največja dovoljena obremenitev: 27.080 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.515 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.725 mm, prostornina tovornega prostora: 93 m³, skupna dolžina: 13.600 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5, medosna razdalja: 7.900 mm, barva: črn, vrsta prenosa: mehanski, Oprema: ABS, Lease hire with no down payment, 72-month term with final installment Technical Data Weights: - Fifth wheel load: approx. 11,000 kg - Permissible axle load: approx. 24,000 kg - Permissible total weight: approx. 35,000 kg - Unladen weight as per DIN 70020: approx. 7,920 kg - Payload as per DIN 70020: approx. 27,080 kg Codpfx Amsx Nbgks Ssrc Dimensions: - External dimensions – superstructure: approx. 13,600 x 2,550 mm - Platform size: approx. 13,515 x 2,480 mm - Rear loading platform height, unladen: approx. 1,142 mm - Clear internal height at rear under cover: approx. 2,725 mm - Clear internal height at front under cover: approx. 2,675 mm - Overall height front, unladen: approx. 4,033 mm - Overall height rear, unladen: approx. 4,017 mm - Usable volume: approx. 93.1 m³ - Fifth wheel height of tractor unit: approx. 1,150 mm Chassis - Integrated chassis frame made of high-quality, painted fine-grain steel Axles - 3 x 9t axles with disc brakes (Z 430 mm), for rims with 120 mm offset, centrally aligned axles - Lift axle: automatic lift axle (3rd axle at rear), controlled via EBS brake pedal function - 1st axle with start assist Wheels - 6 x 11.75 x 22.5 disc wheels, on ALCOA aluminum rims Tyres - 6 x 385/55 R 22.5, brand: Continental HTR2 Suspension - Air suspension unit incl. lift and lower system Brake system - Electronic brake system EBS-Knorr as per DIN 7638, RSS activated, with parking brake via spring-loaded cylinder, brake connections in front bulkhead Kingpin - 2” Jost, conforming to DIN and ISO 1726, replaceable from below Landing legs - 2 mechanical 24t telescopic landing legs with 2 speeds and compensating shoes Floor - Aluminum frame, laid directly on the longitudinal members, with 28 closely-spaced, welded Alu-I crossmembers 100 x 100 mm. All I-beams pre-drilled at uniform intervals using a special boring jig before welding. Our patented special plastic substructure is mounted on this for guiding the moving floor profiles with U-clamps. The moving floor profiles are subsequently tensioned with a cable winch. This substructure system enables us to achieve an absolutely straight

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Crodpfsgcw Rmex Am Soc Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories Credpfsyh S Aiex Am Sjc 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Cjdpfjfi Nmwjx Am Serc Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, največja dovoljena obremenitev: 28.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.530 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, Tovarna nov Knapen Schubboden K 100 A5060 92 m³ * BPW osi * Prva osovina kao podizna osovina * Vazdušno vešanje * Disk kočnice * ABS/EBS * OptiTire sistem za kontrolu pritiska u gumama * Pneumatici 385/65 R22,5 Cedpfx Ameyhtn No Serc * Podupirači menjača sa kompenzacijom potiska * Plastična kutija za alat * Pod od 10 mm, 21 daska * Ploča otpornika od nerdjajućeg čelika ispod poda * Daljinski upravljač za pod, podiznu osovinu i dodatna svetla * Okrugli nosači cerade * Rol cerada, ručno * Nosači cerade sa 3 položaja * 1 par crvenih LED svetala na zadnjem nosaču cerade * Bočna signalna svetla sa funkcijom žmigavca * Upozorenje pri vožnji unazad * 6 dodatnih zadnjih svetala: kod nogu poluprikolice, iza zadnje osovine i na nosaču svetala * Preklopni lim A, ofarban, na levoj zadnjoj vratima * Boja cerade slična RAL 9006 * Nadgradnja lakirana u RAL 7011 gvozdano siva * Šasija pocinkovana, nelakirana !!! Naznačena prodajna cena je fiksna cena sa isporukom iz fabrike Knapen Trailers u NL-Deurne !!!

Stanje: rabljeno, največja dovoljena obremenitev: 28.530 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 13.530 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.550 mm, prostornina tovornega prostora: 85 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Knapen K200 s pomično dno 85m³ * 10 mm dno, 15 tal za razsute tovore * SAF osi z zračno vzmetenjem in kolutnimi zavorami * Strešna rolo ponjava * Premična pregrada * Pnevmatske gume 385/65R22,5 * Plastična shrambna škatla * BPW podporna stojala * Nosilec za metlo in lopato * Delovni podest Crsdpfx Asyhi E Rsm Sec * Delovne luči Za več informacij smo vam z veseljem na voljo.

Stanje: rabljeno, največja dovoljena obremenitev: 28.400 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2014, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 24.600 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 96 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2014, Oprema: ABS, H&W, HWDKSS38, polpriklopnik Walkingfloor, standardna višina priklopa 96 m³ Nadgradnja notranjost / zunanjost: * Drsna tla, Cargo Floor * Dostopna platforma * Rolirna ponjava * Pregradna stena * Konusna nadgradnja (2.700 mm spredaj, 3.000 mm zadaj) * LASI koda XL Šasija / druga oprema: * SAF Intradisc osi * Kolutne zavore * Zračno vzmetenje * ABS, EBS Cjdeykxn Hjpfx Am Sorc * Dviganje in spuščanje * Pneumatike 435/50 R 19,5 * Preostali profil 5 - 12 mm ---- Nezavezujoča ponudba s lokacije Bocholt, vmesna prodaja in napake pridržane. Prodaja samo pravnim osebam ali za izvoz.

Stanje: rabljeno, največja dovoljena obremenitev: 30.670 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.850 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.860 mm, prostornina tovornega prostora: 93 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Moving floor +/- 92 cbm, double-wing door with rotary bar lock at the rear, access steps and standing platform at the front of the body, sliding tarpaulin, "Cargo Floor" floor with 21 planks 10 mm, stainless steel wear plate at rear under the moving floor, 12 lashing rings per side, complete emptying (moving bulkhead), push-in/pull-out function, loading pressure gauge, folding rear light guard, cable remote control, ABS, EBS, BPW Eco Plus axle(s), disc brake system, support legs, 1x toolbox, vehicle may be stickered and/or labeled with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from one of our partner workshops! The vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to offer you a financing or leasing option for this unit. Cjdouf Iruepfx Am Sjrc Please contact us!

Stanje: rabljeno, največja dovoljena obremenitev: 27.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2015, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, PEISCHL Schubboden +/- 90 cbm, 'Cargo-Floor' dno sa 21 letvom debljine 8 mm, zadnja zaštitna ploča od nerđajućeg čelika ispod pomičnog poda, potpuna pražnjenja (pomični prednji zid), funkcija uvlačenja i izvlačenja, dvostruka vrata pozadi sa rotirajućim šipkastim zaključavanjem, pristupna i stojeća platforma napred na nadgradnji, rolo cerada, zaštitna cerada za bočne zidove, ABS, EBS, SAF INTRA osovina(e), prva osovina podizna, disk kočnice, vazdušno vešanje sa podizačem i spuštačem, aluminijumske potporne noge, vozilo može biti oblepljeno reklamama i/ili natpisima. Cedpfx Aet T Ik Uom Serc

Stanje: rabljeno, lastna masa: 7.950 kg, največja dovoljena obremenitev: 31.050 kg, skupna masa: 39.000 kg, prva registracija: 10/2024, prostornina tovornega prostora: 93 m³, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, drsna vrata, elektronski program stabilnosti (ESP), Knapen Schubbodenauflieger 92 m³ Volumen * Leergewicht ca. 7.950 kg * Abmessungen innen (L x B x H): 13,53 x 2,48 x 2,69/2,79 m * Hecktüren mit Edelstahlverschlussstangen und Sicherung * Mitlaufende Trennwand * ABS/EBS * 1 x Liftachse * Alcoa-Aluminiumfelgen * 10 mm Cargofloor * 1-Zoll-Adpro-Anschluss * LED-Lichtanlage * Zusätzliche LED-Rückfahrscheinwerfer * Knapen-Achsen * Bereifung: 385/65R22,5 Sehr guter Zustand! Deutsches Fahrzeug! Auch zur Vermietung! Knapen Walking Floor Trailer, volume 92 m³ * Empty weight approx. 7,950 kg * Internal dimensions (L x W x H): 13.53 x 2.48 x 2.69/2.79 m * Rear doors with stainless steel locking rods and safety latch Csdpewrfaaefx Am Sorc * Mobile partition wall * ABS/EBS * 1 x lift axle * Alcoa aluminum rims * 10 mm cargo floor * 1-inch Adpro connection * LED lighting system * Additional LED reversing lights * Knapen axles * Tires: 385/65R22.5 Very good condition! German vehicle! Available for rental! Remorque à fond mouvant Knapen, volume 92 m³ * Poids à vide env. 7 950 kg * Dimensions intérieures (L x l x H) : 13,53 x 2,48 x 2,69/2,79 m * Portes arrière avec barres de verrouillage en inox et sécurité * Cloison mobile * ABS/EBS * 1 x essieu relevable * Jantes aluminium Alcoa * Plancher mobile 10 mm * Raccord 1 pouce Adpro * Système d'éclairage LED * Feux de recul LED supplémentaires * Essieux Knapen * Pneus : 385/65R22,5 Très bon état ! Véhicule allemand ! Disponible à la location !

Stanje: rabljeno, največja dovoljena obremenitev: 28.520 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2021, naslednji pregled (TÜV): 10/2025, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Knapen K200 s pomično dno 92m³ * BPW osi z zračnim vzmetenjem in kolutnimi zavorami * 1. os dvižna * Pnevmatike 385/65 R22,5 * Delovne luči * Strešna navijalna cerada * Pomikajoča pregrada * Nosilec rezervnega kolesa Credpfx Ajx R Rdbom Ssc * Delovni podest z dostopom Za dodatne informacije smo vam na voljo.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Cjdpfxjfi Nmpe Am Serc Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Csdpfx Asgcw Rism Sjrc Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, Oprema: ABS, Hello! We are pleased to welcome you to our company. We hereby offer you the following vehicle with the listed specifications: Please be sure to leave your telephone number in your message! * First registration: 30.03.2015 * Permissible total weight: 39,000 kg * Empty weight: 8,300 kg * Payload: 30,700 kg * Model: C03S * Overall length: approx. 14.40 meters * Overall width: approx. 2.55 meters * Overall height: approx. 4 meters * Moving wall * SAF axles * Tyres: 385/55R22.5 Our services: - New TÜV (MOT) and emissions inspection - Nationwide delivery within Germany - Test drives available at any time - Attractive financing conditions Cjdpfxjt Hccre Am Sjrc - Trade-in of your existing vehicle Appointments also available on Sundays by prior arrangement.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2003, * Dvižna os * BPW osi * Transportni trak * Pomikalno dno * Pokrivna ponjava * Dozirni valj * Lastna masa: 9.860 kg -----Interna številka vozila: 9815----Pridržujemo si pravico do napak in vmesne prodaje. Podpora prek WhatsApp na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsAppa. Cedpfx Aevyxzbom Sorc Whatsapp Whatsapp

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvižna os * ALU platišča * JOST osi * Pomikajoča cerada * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje Codpfx Asw Rit Tom Sjrc Podpora preko WhatsAppa na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa.

Stanje: rabljeno, največja dovoljena obremenitev: 33.880 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, naslednji pregled (TÜV): 11/2024, dolžina tovornega prostora: 13.425 mm, širina tovornega prostora: 2.502 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Dvigalna os * Prekrivna ponjava * Shranjevalna skrinja * Zračno vzmetenje * Kolutne zavore Crjdpfjwy Hd Nex Am Sjc * SAF osi * Lastna teža: 8.120 kg ----Interna številka vozila 11142-----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsAppa Whatsapp Whatsapp

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.179 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.800 mm, Oprema: ABS, * Stas premična tla * Pokrivna ponjava * ALU platišča * SAF osi * Lastna teža: 7790 kg Crodpoxu Th Uefx Am Soc * Leto izdelave: Interna številka vozila: 11498-----Pridržane so napake in vmesna prodaja

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.435 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.690 mm, * JOST axles * Air suspension * Lift axle * Wabco SmartBoard Crsdpfxsv Hlwis Am Soc * Storage box * Aluminum rims * Tarpaulin cover -----Internal vehicle number: 10290----Subject to errors and prior sale.

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2013, Oprema: ABS, Fliegl Schubboden Walking Floor * First registration: 22.05.2013 * 3 axles * 92 cubic meters * 1st axle lift axle * 1 owner * German trailer * Unladen weight: 7,525 kg * Permissible total weight: 35,000 kg * SDS 350 * Tyres: * 1st axle 385/55 R 22.5 left 5 mm & right 8 mm * 2nd axle 385/55 R 22.5 left middle 10 mm & right middle 9 mm * 3rd axle 385/55 R 22.5 left rear 5 mm & right rear 8 mm Codpfx Ajqk Tf Tsm Sorc * All information without guarantee * HU/SP (German MOT) will be renewed before sale Additional services and criteria on request: * Repainting and retrofitting possible * Short-term and export license plates available * Transfer and shipping possible * Assistance with customs and export documentation * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible * In-house workshop * We speak Polish, English and Russian Repainting in your desired color available in our facility at a reasonable price and high quality. Are you located further away and unable to inspect the truck on site? No problem. You are welcome to appoint an independent expert of your choice to inspect the truck both technically and visually. Should any defects unexpectedly occur, we can quickly and efficiently rectify them in our workshop. Additionally, we can deliver your new used vehicle throughout Europe for an additional fee.

Stanje: rabljeno, največja dovoljena obremenitev: 27.290 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.853 mm, Oprema: ABS, SDS390 101m³ X-TRA Long Moving Floor SAF Lift Axle * German Semitrailer * 101m³ X-TRA Long Model * SAF axles * Lift axle * Disc brakes * Floor: moving floor with wear plate at the rear made from V2A stainless steel, floor planks made from aluminium, 8 mm floor profile, ribbed design, end caps in aluminium * Tires: 385/55 R 22.5 — 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Permissible total weight: 35,000 kg * Payload: 27,290 kg * Air suspension * All information subject to change * Further details and criteria on request Crodpjrwvl Tsfx Am Sec Additional Service Offerings * Repainting and retrofitting possible * Short-term and export license plates available * Transfer and shipping possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available: We cooperate with several leasing companies and can offer every customer the best fitting financing solution. We also often support customers with a weaker credit rating and can connect you with strong leasing partners. * In-house workshop Languages spoken: Polish, English, Russian. Repainting in your desired color is available at our facility with high quality and at a competitive price. Unable to visit and inspect the truck in person? No problem—feel free to appoint an independent surveyor of your choice to perform a technical and visual inspection. Should any defects be found, we can remedy them promptly and professionally in our workshop. Additionally, we offer Europe-wide delivery of your new used truck for an extra fee.