Iveco Ploščad Z Rampami - Priklopnik Za Težke Tovore nakup rabljenega (42.948)

Stanje: rabljeno, največja dovoljena obremenitev: 31.620 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2016, Platforma B = 12.000 mm Nakladalna dolžina 13.500 mm, nakladalna širina 2.480 mm Nakladalna višina 1.200 mm SAF osi Zadnja os vodljiva Zračno vzmetenje Nlsdpex I U E Dsfx Aibsa Dvižna os Razširitvene table Prečne letve za nosilce Žepi za nosilce v okvirju Zaklepi za kontejnerje 2x 20 in 40 čevljev

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, Oprema: ABS, Panav NP036 LowDeck Originalna platforma Prva registracija: 9/2017 Nlsdpfex E Iuaex Aiboa 1. in 3. dvigljiva os BPW osi Nosilec za kole 8 zabojniških zapor – twistlock Kolutne zavore ABS Pnevmatike 445/45 R19.5 Stanje: 1. os: 7 in 14 mm 2. os: 15 mm 3. os: 11 in 6 mm Obratovalna teža: 6100 kg Skupna masa: 36.000 kg.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.400 kg, največja dovoljena obremenitev: 29.400 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 09/1997, dolžina tovornega prostora: 1.360 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, stanje pnevmatik: 70 odstotek, odmik od tal: 850 mm, barva: oranžna, Leto izdelave: 1997, Oprema: ABS, dvižna zadnja plošča, Rabljen nizkopodni polpriklopnik De Angelis z vitlom, 3 osi (3. krmiljena), pnevmatsko vzmetenje, ABS, šasija labodji vrat z dvojnimi elektro-hidravličnimi zadnjimi rampami po celotni širini, hidravlično vitlo pod vratom, največja nosilnost 24 ton, spodnja nakladalna ploščad dolžine 9,95 m, višina 85 cm od tal, aluminijaste stranske stranice višine 70 cm – odpirajoče in snemljive, letnik 1997, tehnični pregled do 31.12.2026. PRODAJA: INTERDRIVE SRL – PARMA. Nsdpfx Aisx H S Awebsla

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.000 kg, največja dovoljena obremenitev: 48.000 kg, skupna masa: 60.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, višina nakladalnega prostora: 850 mm, skupna dolžina: 13.600 mm, skupna širina: 2.550 mm, skupna višina: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, stanje pnevmatik: 74 odstotek, barva: zelen, Leto izdelave: 2017, Oprema: ABS, dvižna zadnja plošča, Rabljeni De Angelis izjemni raztegljivi nizkoploščni polpriklopnik, 4 osi (1. os dvižna, 3. in 4. krmiljeni), šasija raztegljiva za dodatnih 3,70 m, zračno vzmetenje, EBS, Rud kavlji na tleh za 7 t, elektrohidravlične posamezne rampe, stranski razširitvi, zadnje in prednje stabilizacijske noge, letnik 2017, utori za stebre, jekleno-lesena podlaga z zaprto nizko platformo 9,40 m + 3,70 m podaljška, višina od tal 85 cm, aluminijaste stranice na vratu, bruto nosilnost do 70 t, lastna masa 16 t, tehnični pregled veljaven do 30. 4. 2026. Prodajalec: INTERDRIVE SRL, Parma. Nlodpex H Swuofx Aibea

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 29.600 kg, skupna masa: 39.000 kg, dolžina tovornega prostora: 13.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, Oprema: ABS, NEW, 3-axle low loader with SAF axles, 3rd axle steering, toolbox on gooseneck, spare wheel carrier, double hydraulic rear ramps 4000 x 800 mm, manually adjustable, 3+3 RUD certified 10-ton lashing rings mounted on 6+6 slots, 2+2 CARTEC certified 8-ton lashing rings on the upper deck, low loading deck height 850 mm, low loading deck length 10,030 mm Nljdpsv Upfyofx Aibea

Stanje: rabljeno, največja dovoljena obremenitev: 32.760 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, Oprema: ABS, Vehicle Identification No.: WKESD00000656919 CONTAINER LOCKS Unladen weight: 6,240 kg German MOT (HU) due BPW EcoPlus axles with disc brakes LIFT AXLE Nljdpot Ady Dsfx Aibja Stake pockets in the floor, WITHOUT stakesSide wall without lashing rail Toolbox Tyres: 435/50 R 19.5 Spare wheel carrier WITHOUT spare wheel Subject to change, prior sale, and errors excepted. The description serves to generally identify the vehicle and does not constitute a warranty in the sense of sales law. The description in the purchase contract is decisive. Our offer is generally without a new MOT (TÜV) inspection. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops! The vehicle may be stickered and/or labelled with advertising. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 32.660 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2013, Oprema: ABS, Vehicle Identification No.: WKESD00000580961 Unladen weight: 6,340 kg German MOT (HU) due SAF axles with disc brakes LIFT AXLE PALLET BOX Stake pockets in floor, WITHOUT stakes Width marker lights Suitable for truck-mounted forklift Tyres: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel Nsdoiac Iuopfx Aibela Modifications, prior sale, and errors reserved. The description serves only for general identification of the vehicle and does not constitute a warranty as defined by sales law. The description according to the sales contract is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be equipped with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 32.760 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, Oprema: ABS, Vehicle ID No.: WKESD00000657113 CONTAINER LOCKS Nedpfx Aiswwykdebjla Curb weight: 6,240 kg German MOT (HU) due BPW EcoPlus axles with disc brakes LIFT AXLE Stake pockets in floor, WITHOUT stakes, lateral slotted rail Toolbox Tyres: 435/50 R 19.5 Spare wheel carrier WITHOUT spare wheel Subject to change, prior sale, and errors. The description is for general vehicle identification purposes only and does not constitute a warranty in the legal sense of purchase law. The contractually agreed description is binding. Our offer is generally without new roadworthiness approval (TÜV). If required, we are happy to provide a quote for a new inspection from one of our partner workshops! Vehicle may be covered with promotional decals and/or lettering. Our general terms of delivery and payment apply.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2009, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2009, Oprema: ABS, KRONE flatbed semi-trailer with TwistLock pre-equipment and stake pockets (for Swedish stanchions) German trailer, 2nd owner Technical data Model: SDP 27 eL Kingpin load: up to 14,000 kg Axle load (technically possible): 27,000 kg Gross weight (technically possible): up to 39,000 kg Unladen weight: from 6,700 kg Payload (technically possible): up to approx. 32,300 kg Wheelbase: 1,310 / 1,310 mm Frame height front: 225 mm Fifth wheel height unladen: 1,150 – 1,450 mm Internal length: 13,480 mm Internal width: 2,480 mm Front overhang radius: 1,995 mm Technical description: Pre-installation for TwistLocks container locks: 1x 40’, 2x 20’, 1x 20’ center Mechanical landing gears, 2 x 12 t, semi-round with base plate BPW Eco 9 t axles with air suspension and disc brakes (430 mm), offset ET 0 With lift and lowering device Tyres: 6 units, size 385/65 R 22.5 (2x 25%, 2x 20%, 2x 15% tread) Spare wheel holder Plastic mudguards EU brake system including Vehicle Stability System Spring-loaded parking brake EBS system 2S/2M, 2 sensors on one axle Diagnostics via ISO7638 connector (EBS supply cable) 24-volt lighting system with two 7-pin sockets, DIN ISO 1185/3731 Multifunction rear lights to EU spec including rear fog lamp and reverse lamp 2 LED reversing lights 2 marker lights with rubber arms Side marker lights Stanchion depot for plug-in stakes on the right 30 mm thick timber floor Front wall bolted steel with sturdy central and corner stanchions Height: 1,600 mm Front wall strengthened on the inside with phenolic plywood 2 steel bumpers at the rear Delta-pattern steel impact profile transversely on the rear frame Water tank Lashing rings on the outer frame Device for oversize load (partly present)!!! Condition in line with age and mileage: OK! Chassis has the usual rust New MOT (TÜV/inspection) available at extra cost Delivery by arrangement and for an extra charge All details without guarantee! Sale to traders or export only! ATTENTION: PRICE IS NET EXCLUDING VAT German, English: JOSEF WhatsApp: Nledpfx Aioiwwhbobea We speak: German, Czech, Polish, Romanian, Russian, English

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Nljdpfjwg E Rbex Aibja

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 13.000 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 07/1995, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: modra, Leto izdelave: 1995, Oprema: ABS, extendable low-loader De Angelis, year 1995, payload up to 37 tons, 3 axles with air suspension, ABS, 2nd and 3rd axles steering, extendable chassis with a central extension of additional 3.50 m, closed well (culla) 5.0 m, height from ground 44 cm, removable cover above axles, manual rear ramps, good condition, DEALER: INTERDRIVE SRL – PARMA Nsdpowa T T Refx Aibsla

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.200 kg, največja dovoljena obremenitev: 31.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2019, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 235.75 r 17.5, barva: prometno oranžna, Leto izdelave: 2019, Oprema: ABS, Rabljen polpriklopnik nizkopodni Moeslin, gosji vrat, rampe, 3 osi (tretja vodilna), zračno vzmetenje, EBS, priprava za pomične zadnje rampe, sprednja glava 120 cm, bočni kavlji Rud 5 ton, twist lock za kontejnerje 20+20, 40 in 45 čevljev, 3 prečne ojačitve za nosilce, 2 PVC orodjarni, višina od tal 84 cm, letnik 2019, na voljo pri trgovcu INTERDRIVE SRL-PARMA. Nedpjxnqvcsfx Aibela

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm Nodpfx Aijq Dyvyjbola * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: rabljeno, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2023, dolžina tovornega prostora: 13.590 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 1.200 mm, Oprema: ABS, VIN: W09SPLB2ZPEN10219 2-Axle Semi-Trailer HRD Type: SPLB2Z Platform semi-trailer with container locks Fifth Wheel Load: 12,000 kg Aggregate Load: 20,000 kg Warning signs for oversize width, extendable Steering: Model: VSE ETS II, on both axles Axles / Suspension: Number / Capacities / Make: 2 x 10,000 kg, SAF Brakes: 17.5" drum brakes Suspension: Air suspension with lift and lower function Axle lift: Not included Axle spacing: 2,100 mm Wheels/Dimensions: 235 / 75 R17.5" fitted on 10-hole steel rims Quantity: 8 Stainless steel toolboxes Locking positions: 6 pairs, suitable for the following positions: - 11,000 mm platform flush with rear - 11,000 mm platform flush with front - 2,400 mm platform flush with rear - 2,400 mm platform flush with front Load securing: Lashing rings type: 50kN Vario (see attachment) Nedpfev T Hyfjx Aibela Quantity & position: 11 pairs in the outer frame Lashing holes: Ø 32 mm in the outer frame, c.c. approx. 400 mm Stake pocket positions: 8 pairs for stakes 81 mm x 51 mm in the outer frame Stake rows crosswise: 4 rows (positions to follow) Tyres Axle Position Dimension Manufacturer Model Type Rim Tread depth 1 Left Out 235/75R17.5 143/141K Continental HTR2+ Steel 11.0 mm 1 Left In 235/75R17.5 143/141K Continental HTR2+ Steel 11.0 mm 1 Right In 235/75R17.5 143/141K Continental HTR2+ Steel 11.0 mm 1 Right Out 235/75R17.5 143/141K Continental HTR2+ Steel 11.0 mm 2 Left Out 235/75R17.5 143/141K Continental HTR2+ Steel 10.0 mm 2 Left In 235/75R17.5 143/141K Continental HTR2+ Steel 10.0 mm 2 Right In 235/75R17.5 143/141K Continental HTR2+ Steel 10.0 mm 2 Right Out 235/75R17.5 143/141K Continental HTR2+ Steel 10.0 mm Customs license plates and insurance available at extra cost upon request! For export transactions, we can handle the export declaration and registration for you against reimbursement of costs. For exports to non-EU countries, a deposit of 19% of the purchase price will be withheld. This will be refunded to the buyer after successful customs clearance or delivery. For further information, please contact Mr. Lübberding via mobile / WhatsApp or Mr. Rohe! Always arrange an appointment for inspection or test drive! Just drop by and visit us—we look forward to seeing you. Disclaimer: The information provided online is non-binding and for descriptive purposes only. It does not constitute warranted features. The seller is not liable for typing, data transmission errors, changes, or mistakes. Subject to prior sale!

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2015, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 Platto, dvigljiva os, SAF osi Int. št. za povpraševanja: 1225958 * ABS * EBS * 3-osi, zračno vzmetenje * dvigljiva os * kolutne zavore * SAF osi Dolžina tovornega prostora: dolžina: 13.600 mm * širina: 2.520 mm Pnevmatike: Nlodpfx Aisyavigobea 1. os: 385/55 R 19,5 30% zračno vzmetenje / dvigljiva os 2. os: 385/55 R 19,5 30% zračno vzmetenje 3. os: 385/55 R 19,5 30% zračno vzmetenje ----Cena: 3.900 EUR + 19% DDV Za dodatna vprašanja smo dosegljivi na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ????? Pridržujemo si pravico do napak v besedilu, pomot in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: Nlodpfx Asq Euakoibea * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions Nedpfx Asykx I Heibsla * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: rabljeno, skupna masa: 3.500 kg, konfiguracija osi: 1 os, prva registracija: 09/1996, Leto izdelave: 1996, Oprema: žerjav, * Technische Daten: * Name: DENKA LIFT MK 25 *Clemens AB 25meter Arbeitshöhe: 25,00 m / 200 kg Korblast: 200 kg / 2 Personen Drehbereich: 360° endlos Reichweite: 11,40 m / 80 kg Reichweite: 9,00 m / 200 kg Eigengewicht: 2.450 kg Arbeitskorb: 0,70 x 1,40 m Durchfahrtsbreite: 1,69 m Durchfahrtshöhe: 2,11 m Gesamtlänge: 9,07 m Nlsdpfexzw Hzjx Aiboa Gesamtlänge minimal: 8,30 m * Abstütz-Quadrat: 3,90 x 3,90 m * Ausstattung - 24 V Batterieantrieb mit eingebautem Automatik-Ladegerät - hydraulische Schnellabstützung - zweites Bedienpult am Unterwagen - 230 V Steckdose und Werkzeugablage im Korb - Winkelarm mit drehbarem Korb - manueller Notbetrieb - Sicherheitsüberwachung für Stützbeine und Überlast - stufenlose Proportionalsteuerung * Arbeitszeit von Mo bis Fr 07:30-12:00 13:00-18:00, Samstag 07:30-17:00. * E-Mail: * Tel/ Whatsapp/ Viber: Alexandar Ilic * Tel/ Whatsapp/ Viber English: Mladen Ilic

Stanje: rabljeno, številka stroja/vozila: W09TS300870M49625, lastna masa: 12.400 kg, največja dovoljena obremenitev: 32.600 kg, skupna masa: 450.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 14.340 mm, skupna širina: 2.550 mm, skupna višina: 3.780 mm, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2008, The Meusburger MTS 3 low-loader is the ideal solution for anyone seeking a reliable, robust, and versatile truck trailer. Its high-quality workmanship and sturdy construction ensure a long service life and a high level of safety in any application. Thanks to its spacious platform, the MTS 3 offers ample room for a wide variety of loads, whether in construction or heavy haulage. The premium build quality and solid design make it a worthwhile investment for businesses. For more information or consultation, please do not hesitate to contact us! Nlsdpfeygxb Sjx Aibja Performance Features / Basic Data: Axles: 3 Length: 14.34 m Width: 2,550 mm Height: 3,780 mm Unladen weight: 12,400 kg Kingpin load: 18,000 kg Gross vehicle weight: 45,000 kg (technical) Max. axle load: 10,000 kg Tyres: 235/75R17.5 Equipment: - Two-piece hydraulic rear ramp - Axle spacing 1/2: 1.41 m - Axle spacing 2/3: 1.31 m - Axle 1: liftable - Axles 2 and 3: hydraulically steered - NATO socket

Stanje: rabljeno, številka stroja/vozila: W09H20338BHZ07032, lastna masa: 12.700 kg, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2012, The Zanner STL 38 low-bed trailer is a robust and versatile semi-trailer, ideal for transporting heavy and oversized cargo. Its sturdy construction and flexible application possibilities provide an efficient solution for your logistics and transport needs. Thanks to its low loading height and access ramps, loading and unloading are particularly straightforward, saving you both time and effort. Whether in the construction industry or for heavy haulage, the Zanner STL 38 impresses with its performance and durability, making it a worthwhile investment. If you are interested, we are happy to provide you with further information or a consultation! Specifications/Main Data: Length: 13.95 m - 14.37 m Width: 2.55 m Height: 2.80 m - 3.80 m Loading height: 920 mm Nljdpfxeyguxme Aibja Gooseneck: 1,350 mm Unladen weight: 12,700 kg Kingpin load: 11,000 kg Perm. total weight: 38,000 kg Maximum axle load: 10,000 kg Tyres: 235/75R17.5 Axles: 3 Axle spacing 1-2: 1.41 m Axle spacing 2-3: 1.31 m Lifting axle: 1 Steering axles: 2 Equipment: - Two-piece hydraulic ramp, adjustable - Hydraulic forced steering - Central platform vertically pivotable - Hydraulic cable winch with remote control - Hydraulic steering - Hydraulic supports - NATO plug

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 3-axle semi-trailer in platform design with Fassi crane F545RA.2.26 Chassis Welded construction with cross members made entirely of high-grade steel Neck structure reinforced for front-mounted crane Axles 3 BPW axles, each with 9,000 kg load capacity, with disc brakes ABS: 1 axle sensor-equipped Axle spacing: 1,310 mm / 1,420 mm Third axle as trailing steering axle (optionally available with forced steering) Tyres 6 x 385/65 R22.5, mounted on steel rims Lighting system 24V lighting system in accordance with EU directives 76/756/EEC et seq., featuring: 2x2 triple-chamber LED taillights 1x LED reversing light 1x LED fog light LED side marker lights Lane-keeping lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket, compliant with EU standards Floor Anti-slip phenolic plywood floor Steel chequer plate in axle area Load securing Outer frame with D30 mm lashing hole profile on the bevel 2x12 lashing points (8,000 daN) in the outer frame 3x combi stake pocket rows for 80x80 mm posts in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier with winch 2x toolboxes with pull-out drawer (chain storage) etc. Crane: Nsdpfxsyihg Tj Aibjla Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional stabilizer beams 360° working range approx. 100% outreach to the front The attached images are sample images. We manufacture crane semi-trailers in various designs. For further information, we are at your disposal. Upon request, we will send you a quotation based on your desired equipment.

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Availability from week 19/2026 Nedpfxjq Dyv Ie Aibola

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles Nodpfx Ajtplwijibsla * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs, 110 mm wide, with tandem equalizer unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal front wall * Side walls made of trapezoidal profiled steel sheet, foldable with board spring lifter * Steel rear wall, insertable between the ramps (holder for unused panel inside the front wall) * Bolted rear stanchions * Outer frame perforated and angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Possible installation of 3 t recessed lashing rings every 600 mm Nodpsl Th Hwefx Aibjla * In each corner front and rear: 1 x 10 t lashing ring; various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail centrally along longitudinal axis for lashing up to LC 3,000 daN * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Side boards painted RAL 9010 pure white * Side wall painting in a RAL color available at extra charge * Axles, springs, air tank, flange towing eye, and landing gear painted in black * New vehicle with full manufacturer warranty * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 profile 30.0: * EBS brake system * TPMS tire pressure monitoring system Nljdpfel Thxdox Aibsa * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle load equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Closed plastic mudguards on the front axle and straight galvanized steel fenders at the rear axle, each with spray protection * Reflective contour marking tape on the sides and rear * Foldable lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power plug * Four stake pockets on each side (however, no stakes included) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear taper) * Widening planks stored in the middle of the loading area * Excavator boom rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator boom rest) * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * 4-way control block for subsequent retrofitting of hydraulic ramp shift * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical GVW of 30,000 kg possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 18/2026