Humbaur Polpriklopnik Z Nizko Nakladalno Ploščadjo nakup rabljenega (28.965)

Stanje: rabljeno, največja dovoljena obremenitev: 84.000 kg, skupna masa: 105.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2000, Oprema: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 HYDRAULIC SUSPENSION - Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg - Axle loads: 6 x 13,000 kg Unladen weight: 21,000 kg RO HU due Dedpfxox Txllj Al Heut Gooseneck: 3,900 mm Saddle height: 1,350 - 1,450 mm Low bed: Length: 13,550 mm (600 mm of which tapered) -- Width: 3,000 mm -- Loading height: 920 mm TELESCOPIC (with sliding table - 500 mm) Insertable rails Axle loads technical: 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTABLE Axles 2, 3, 4, 5, 6 = FORCED STEERED Tyres: 9.5 R 17.5 We expressly reserve the right to make changes, prior sale, and errors. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sale of goods. The details in the purchase agreement are binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be pleased to provide a quote from our partner workshops! The vehicle may be labelled and/or branded for advertising purposes. Our general delivery and payment terms apply.

Stanje: rabljeno, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, 4-AXLE LOW LOADER SEMITRAILER WITH CRANKED PLATFORM Tractor unit data and equipment: 3-axle tractor unit Please check saddle height under the "Dimensions" section! No modifications to the tractor unit required Please note: 5,000 mm = maximum distance from front of tractor unit to center of fifth wheel coupling 1,730 mm = minimum clear front distance from fifth wheel coupling center 2,230 mm = maximum rear turning radius Tractor unit suspension type: air suspension Gross train weight (permitted): 40 t Gross weight (technical): 58 t Axle unit load (technical): 40 t Saddle load (technical): 18 t Approx. 3,500 mm = front cranked platform Approx. 7,970 mm = low bed platform – level loading area Approx. 730 mm = rear ramp slope Overall width approx. 2,550 mm (approx. 3,000 mm with extensions) Loaded loading height approx. 870 mm Unloaded loading height approx. 900 mm With unloaded saddle height approx. 1,250 mm For combined vehicle operation, please observe legal total height and total train length limits! Welded steel construction with front inclined frame crank and rear incline (without central excavator shovel recess) 5 pairs of lashing pockets in the low bed for box stanchions 100 x 50 mm 4 pairs of lashing eyes on the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t lashing rings on the cranked platform 7 pairs of recessed, retractable 5t lashing rings (10t technical pull force) in the low bed + 1 pair folding, between 2nd and 3rd axle 1 pair of recessed, retractable 10t lashing rings on front crank slope Pair of recessed, foldable 10t lashing rings on the inside of side member after 2nd axle 1 pair of recessed, foldable 10t lashing rings on the inside of side member after front crank Interchangeable 2" king pin 5 pairs of steel box stanchions 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, stanchion securing by pressure actuation # Permissible stanchion load 1,000 kg per stanchion with load application point 500 mm above ground Both sides of the low bed platform with extendable widening elements with 50 mm softwood planking (track width of the construction machines to be transported must not exceed outer frame width of 2,550 mm) Mechanical steel support winches, 2 x 12 t, single-sided operation (right), load compensation, manufacturer at factory’s discretion 2 hydraulic supports at rear – individually operable, controls housed in a separate stainless steel box AF air-suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake slack adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as stub axle/friction-steered SAF trailing axles, approx. 20° steering angle, electro-pneumatically controlled reverse lock automatically activated via reverse gear, also switchable from the cab and with release valve on the trailer Start-assist on 1st axle = speed-limited pressure relief, unloadable when loaded, actuation via button in cab Mechanical odometer mounted on 2nd axle, right side in driving direction 16 pcs. Tires 245/70 R 17.5, 146/146F (tire load capacity 12t/axle) 16 pcs. Steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12t/axle) 1 pc. Tire 245/70 R 17.5, 146/146F, make: Conti HTR2 (tire load capacity 12t/axle) 1 pc. Steel rim 6.75 x 17.5, with offset, silver Dujdou Uzv Ejpfx Al Het Tread depth: 10-11 mm WIT – Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package ... further details on request! Export pla

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Dusdog Sk Trspfx Al Hjt Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Dodpfeg Sk T Dex Al Hjut Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Dedpfx Aov D Abmel Hjut

Stanje: novo, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded coupling height: 1,200 mm Rear swing radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Chassis length: 2,600 mm Chassis rear loading height at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Low-bed: Low-bed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking device. Supply lines are routed safely within the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of folding external lashing rings (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat lashing rings in trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm plug-in uprights in outer frame Gooseneck: Gooseneck in SNT design for maximizing loading area length, length approx. 3,785 mm. Gooseneck hydraulically lift/lower and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 PENDLE AXLE: "PENDLE-AXLE", all axles hydro-mechanically forced steered. Burst protection valve on axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position. Axles finished in 2 layers of single-color 2K paint (FAY-Gray-34-0260). Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Djdpfx Aljizu Nwj Hout Brake system: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor. Electrical system: Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S, and 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Steel construction: Steel structure made of high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single-color in RAL shades of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Tyres: 245/70 R 17.5 3PMSF tyres, brand at manufacturer’s discretion. Load index (146/146F) Prepared to accommodate bolted container positioning devices for 1x 20' or 1x 40' container on the outer beams. Without container locks. - 2” king pin - Galvanized steel headboard, approx. 400 mm high - One spare wheel with holder in front of the headboard - Two wheel chocks with holder on the headboard - At the galvanized front connection panel, yellow-red air couplings - Steering from front and rear via remote cable control with push buttons, including single-track axle control (without installation on the tractor unit) Hydraulic connections from gooseneck to low-bed

Stanje: novo, največja dovoljena obremenitev: 36.461 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Leto izdelave: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: Dodpfx Alow Dl Hwe Heut Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings at the front central beam (LC 10,000 daN). C40/4 grating floor (point load 2.3 t on an area of 20 x 20 cm), over the axles checker plate covering. Two-part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections, hydraulic lifting system. Max load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length of 16,500 mm when in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in line with ECE R 141. Data transmission to the towing vehicle is via the standardised EBS interface according to ISO 11992. The towing vehicle must be able to receive and display this data for correct indication. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to tractor unit. Electrical System: Electrical system according to EU regulations, LED lighting 24 V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15 pin. Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction made of high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Curtainsider Structure: Curtainsider body, ??? 3,960 mm ??? - Galvanised front wall with a tensioning mechanism for sliding curtains. - "EDSCHA" roof, forward sliding on ALU roof beam profiles (bolted to front and rear wall). - 3 pairs of sliding stanchions in the loading platform. - The body is hydraulically extendable at the rear by approx. 750 mm left and right. - Sliding roof with upward folding portal beam. - Sliding curtain with 700 mm length reserve and tie-down straps approx. every 600 mm. Height upper edge of body approx. 3,960 mm (laden). - Driving with an open sliding roof is not permitted and will cause damage to the curtain. Paintwork: Entire steel structure is shot-blasted automatically after welding using a wheel blast system. Second blasting with corundum for optimal coating system adhesion. HRM-metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection. Final painting with two layers of 2K topcoat, single colour, shade selectable according to RAL 841GL. Rear section metalized and painted RAL 9010 (pure white). No metallic paint.

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Duedpfxog Sk Tvs Al Hjt Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Dujdpfx Asv D Abtjl Hst

Stanje: novo, največja dovoljena obremenitev: 34.104 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Further details here: Dsdpfx Alev D Abge Hsut

Stanje: novo, največja dovoljena obremenitev: 40.017 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Technical Specification Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading platform: 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of flat lashing rings at the front end of the platform (LC 10,000 daN). Approx. 48 mm hardwood flooring, over the axle areas with checker plate covering. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load). Tyres: 205/65 R17.5 tyres, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit occurs via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transferring and displaying this data. Dedow Dl Hqopfx Al Hsut Axles: BPW axles, two rigid, two self-steering, air-suspended, drum brakes, with lift/lower function. The self-steering axles have an electromagnetic reverse lockout, activated via reverse gear or manually. Axle tool included. Brake System: WABCO braking system in accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor. Electrical System: Electrical system per EU regulations, LED lighting, 24V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets. Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: High-strength fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: Entire steel construction automatically shot-blasted after welding. Additional blasting with corundum for optimal coating adhesion. HRM-metallisation of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection. Final coating with 2 layers of 2K top coat, single-colour to customer choice according to RAL 841GL. Rear section metallised and painted in RAL 9010 (pure white). Metallic paints not possible. Paint finish tested with salt spray test according to ISO 9227-NSS. Cavities sealed with special wax. Options Included: 2" king pin Galvanised steel front wall. Yellow-red air couplings on galvanised front connection rail. 2 wheel chocks with holder at the front wall. Rear gooseneck ramp mounts for ALU loading ramps. Further options available.

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Dusdpjizu Ntjfx Al Hot Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Maximum speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Coupling height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Load height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific legislation: Technical Description Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading platform: Loading platform approx. 9,600 mm in length with rear bevel approx. 900 mm x 6°. Loading area after gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle according to technical datasheet: C470319 Maximum gradient angle with lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion Load index 143/141J (144/144F) Brake System: WABCO EBS-E brake system according to EU regulations. No connecting cable to the tractor unit included. Lighting System: 24V lighting system in "ASPÖCK-NORDIK full LED" version according to EU regulations. (ASS 3) Metallisation: Complete HRM metallisation (High Resistance Metallisation) Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). 6-Coat Paint Treatment: Entire steel structure shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Topcoat consisting of 2 layers of 2K paint (acrylic) in a single RAL shade of choice, followed by cavity sealing with special wax. Rims in silver. Multi-colour and special coatings available at extra charge. Steel Construction: High-strength fine-grain steel structure. Steel grades: S355J2+N/S355MC (min. yield strength 355MPa) S690QL/S700MC (min. yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG-welding process to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Front bulkhead made of steel, detachable, approx. 400 mm high Connector strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. Anderson socket at the front connection strip. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or

Stanje: rabljeno, lastna masa: 13.200 kg, največja dovoljena obremenitev: 52.800 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and function report. Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Load Area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame for attaching tension belts (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Axles and Tyres: - BPW axles and suspension, 1st axle rigid, all others hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Two-part Steel Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramp sections hydraulically foldable and retractable, with hydraulic lifting and shifting - Max load per pair: 40,000 kg Included Accessories: - 2'' king pin - Galvanized steel front wall approx. 400 mm high Duodpfx Aloyffd De Het - Yellow and red air couplings to the galvanized coupling rail at the front - 4 wheel chocks - One spare wheel - Electro-hydraulic power unit - Remote steering front and rear via cable remote control with push buttons, including axle alignment monitoring - Mounting at the rear of the gooseneck for ALU approach ramps - EU reflective panels (red-yellow) at the rear of the trailer - White reflective tape on sides, extension and rear in red (per EU regulations) - At the gooseneck and ramps, left and right, holder for warning boards including socket - Holder for a rotating beacon at the rear of the trailer - Galvanized folding supports under the chamfered load area - Ramp control valves mounted on the right trailer side - Cover plates to bridge the gap between ramps and load area - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm - Rear galvanized plug-in stanchions removable (structure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mounted on the gooseneck, box covers oil filler cap - 4 pairs of WADER container lock pockets on load area, for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in outer frame - Galvanized, extendable platform wideners approx. 230 mm per side - Square-section climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfer - Lift axle on front axle with TEBS E control, based on axle load and loading condition - Four extendable warning signs, approx. 400 mm extension, dimensions 423 x 423 mm each with position light - Radio remote control for rear axle steering, in addition to cable remote, with signal lights for axle alignment on receiver - Anti-slip sand coating painted on checker plate surfaces of gooseneck and load area - 80 km/h speed decals rear and on both sides

Stanje: rabljeno, največja dovoljena obremenitev: 43.640 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2013, Semi-trailer with air suspension and hydraulic dual-circuit forced steering (turntable steering) Loading platform from 15,475 mm up to 54,575 mm Loading platform - “Flatbed” design, 4-fold extendable with stepped gooseneck - Mechanical landing legs - Front corners 90°, closed outer frame - Front-end integrated steering linkage - Kingpin plate mounted on ball bearing turntable with exchangeable 2" kingpin and adjustable steering wedge - Rear crossmember designed as reinforced underrun protection Chassis - 4-axle chassis with air suspension including lift and lower valve - BPW axles with adjustable tapered roller bearings Dsdeyltm Hepfx Al Hsut Brake system - Dual-line, all-wheel pneumatic brake system with diaphragm cylinders - Automatic load-dependent braking (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded actuators - ABV (ABS) Loading platform L x W: 15,475 mm x 2,520 mm Extendable by 9,800 mm + 9,700 mm + 9,800 mm + 9,800 mm up to 54,575 mm deck height loaded: 1,305 mm at fifth wheel height loaded: 1,300 mm Articulation radius to rear: 2,350 mm Gooseneck capacity: 25,000 kg Axle loads: 4 x 10,000 kg Steering 1st to 4th axle hydro-mechanically force-steered (dual-circuit steering) (turntable steering) Electric power unit with wireless remote control

Stanje: novo, skupna masa: 36.000 kg, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 1.640 mm, višina nakladalnega prostora: 3.770 mm, Leto izdelave: 2026, Oprema: ABS, Posebno vozilo za prevoz viličarjev. Notranji nakladalnik / vmesni nakladalnik za največjo notranjo višino cca 3.770 mm Ponujena cena brez dodatne opreme. Na voljo oprema: Zadnji del z nakladalnim dvigalom / dvigalo, primerno za nakladanje in razkladanje na rampah. Dodpfjvw Hm Tex Al Hsut Vozilo je v proizvodnji in ima dobavni rok. Na zahtevo pripravimo ponudbo z želeno opremo. Več informacij na: ali nas pokličite.

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable loading platform: - Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steering - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Axle tool kit - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres: 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip - 2 wheel chocks with holder on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring - European reflective warning plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Gooseneck and rear left and right brackets for warning signs, including socket - Sliding hook-in bar for ALU loading ramps at the rear of the vehicle - One bracket for a rotating beacon at the rear of the trailer - Galvanized folding supports under the rear bevel of the loading platform - One mudguard at the rear of the trailer - Operating manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover - Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm - The rear galvanized stanchions are removable (body length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Dsdpfxjyxc Eye Al Heut - One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - On the warning signs a bracket for a rotating beacon - Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring - On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection - Speed sticker 80 km/h at the rear and on both sides - Axle load gauge for determining axle loads, including load diagram

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WLAST300000A72224, lastna masa: 13.880 kg, prva registracija: 08/2023, naslednji pregled (TÜV): 12/2026, skupna dolžina: 17.100 mm, skupna širina: 2.550 mm, skupna višina: 3.750 mm, Leto izdelave: 2023, LANGENDORF low-bed semi-trailer with wheel recesses, drive-over version, type SATÜV 30 – 8,900 mm + 4,200 mm telescopic extension, compatible with a three-axle tractor unit 6x4, wheelbase 3,300 mm, “A” dimension max. 5,000 mm. Rear loading ramps: L x W 2,950 + 1,700 x 700 mm, automatically spreadable. Permissible total trailer weight: 48,000 kg Permissible fifth-wheel load: approx. 18,000 kg Permissible trailer axle load: 30,000 kg Unladen weight: approx. 14,000 kg Payload with uneven load distribution: approx. 34,000 kg Gross vehicle weight (according to StVZO): 40,000 kg Unladen weight of tractor unit (depending on type): approx. 9,500 kg Unladen weight of low-bed semi-trailer: approx. 14,000 kg Payload (according to StVZO): approx. 16,500 kg Gross train weight with exceptional permit (per § 29): 41,800 kg Payload with exceptional permit (§ 29, indivisible load): approx. 18,300 kg Gross train weight with exceptional permit (per § 70): 56,000 kg Payload with exceptional permit (§ 70, indivisible load): approx. 32,500 kg Dimensions: Dodpfx Ajywniujl Hout * Kingpin to rear of vehicle: approx. 11,500 mm * Loading length incl. 600 mm ramp slope: 8,900 mm * Telescopic extension: 4,200 mm (total loading length up to 13,100 mm) * Platform loading length: 3,500 mm * Loading width: 2,550 mm * Loaded loading height at full load incl. 10 mm timber floor overhang to the outer frame: approx. 910 mm * Axle spacing: 2,260 mm – 1,410 mm * Saddle height loaded: 1,250 mm

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, air suspension, rear axle steered, ABS (anti-lock braking system), lashing eyes, underrun protection, supports, storage box Body: 3 units available! Total length approx.: 13,800 mm Maximum total width: 2,550 mm Total height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Lowbed length approx.: 9,600 mm Loaded deck height in lowbed approx.: 900 mm Djdpfx Aex Hkciol Hjut Internal width approx.: 2,480 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grain steel welded construction, reinforced design, fifth wheel plate with replaceable 2" kingpin, slightly inclined outer frame with "Load-Lock profile" for attaching tie-down straps, 8 additional pairs of lashing eyes recessed into the outer frame, each rated at 5 tons, 1 detachable compensating block on the lowbed deck (3-part), top timber cross member at least 200 mm wide for height compensation; gooseneck adjustable to 3 positions with parking position at the crank; 4 pairs of stake pockets 83 x 83 mm recessed into the floor for inserting the compensating block; open storage compartment for insertable stakes located below the loading area; 13 pairs of stake pockets recessed into the outer frame with 70 x 40 mm internal dimensions (3 pairs on gooseneck and 10 pairs on lowbed); 3 rows of stake pockets recessed into the floor, each with 7 stake pockets, 70 x 40 mm internal dimension, 26 plug-in stakes B=80/T=50/L=1200 mm, hot-dip galvanized; hardwood floor approx. 30 mm thick, laid lengthwise, with omega profiles for high point load capacity in the wheel recess area, steel/chequer plate floor. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Stanje: rabljeno, največja dovoljena obremenitev: 46.600 kg, skupna masa: 64.000 kg, prva registracija: 04/2009, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 13.730 mm, širina tovornega prostora: 2.750 mm, Oprema: ABS, * ABS * Krmilna os * Oranžna rotacijska luč * BPW-ECO osi * 5-komorni zadnji žarometi Dedpfx Ajyu Htxol Hsut ----Nadgradnja: nizkopodno globoko nadgradni priklopnik (8000 mm/globoko podvozje + 5730 mm/šasija), višina nakladanja v globokem podvozju cca 550 mm (obremenjeno), labodji vrat snemljiv (prevozen spredaj), nakladalna ploščad na labodjem vratu (3750x2480x300 mm), 4x krmilna os in pomožno krmiljenje z daljinskim upravljanjem, globoko podvozje razširljivo do 3.190 mm, pod iz trdega lesa/jekla, vezni obroči. Prodaja le pravnim osebam. PRI IZVOZU SE PLAČA LE NETO CENA !!!!! VSE INFORMACIJE SO BREZ GARANCIJE, ŠE POSEBEJ OPREMA IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji poslovanja (glej Impressum).

Stanje: rabljeno, največja dovoljena obremenitev: 34.500 kg, skupna masa: 50.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2025, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 12.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, skupna širina: 2.550 mm, skupna višina: 320 mm, Leto izdelave: 2025, Oprema: ABS, 2-axle low-loader/low-bed trailer with full equipment First registration 05/2025, new vehicle Total length: 13,065 to 17,565 mm (single telescopic extension 4,500 mm, extendable in 500 mm increments) Fifth wheel height: 1,200 mm Low-bed length (standard): 6,650 mm Low-bed length (extended): 11,150 mm Gooseneck length: 3,650 mm Rear bogie length: 2,765 mm Dusdpfx Aew A Ekmol Hjt Loading height on rear bogie: only 845 mm LOW-BED LOADING HEIGHT: approx. 300 mm (loaded) Gross technical weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis: 3-coat paint Detachable gooseneck with external main frame Central lubrication system for front chassis and an additional for rear bogie All axles with hydraulic forced steering GIGANT axles with drum brakes WABCO trailer EBS with RSS anti-skid control WABCO Smartboard PENDULUM AXLES with hydraulic suspension, 600 mm lift RADIO REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental 24-Volt electric hydraulic system OVERSIZED LOAD PACKAGE 10 pairs of foldable loading platform extensions, each 225 mm 3 pairs of CONTAINER locking adapters, for 40 ft or 20 ft container accommodation Removable side wall superstructure on the fifth wheel platform Loading ramps for the low-bed platform 5 pairs of swivelling lashing rings, 10,000 daN lashing capacity in the low-bed 4 pairs of stake pockets in the outer frame 3 pairs of swivelling lashing eyes on the rear bogie 1 pair of lashing eyes on the rear underrun bar, LC 6,000 daN RENTING IS THE NEW BUYING – immediately available for rent or full-service leasing

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tires: -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder Duodpoywv Ixofx Al Hot -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: rabljeno, lastna masa: 20.000 kg, največja dovoljena obremenitev: 66.000 kg, skupna masa: 86.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2013, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Fahrzeugstandort: Bovenden, luftgefedert, 6-Achsen, BPW Achsen, 1. Achse liftbar, Zwangsgelenkt, Heben und Senken, ABS (Antiblockiersystem), Zentralschmieranlage, ausziehbar, verbreiterbar auf 3m, Verzurrösen, hydraulische Rampen, Abstützung vorne, Abstützung hinten, EBS Aufbau: Teleskopierbar um 7m. Voll ausgezogen 21,25m, 10 - 17m im Bett. Staukasten auf Schwanenhals L: 2450mm, B: 2450mm, H: 450mm. Königszapfen 2 Zoll, 5 x hydromechanisch zwangsgelenkte Achsen, 5 x 10t BPW Achsen, 2 Zentralschmieranlagen, Schwanenhals hydraulisch verstellbar, Hydraulikpumpe wird elektrisch von der Zugmaschine versorgt (Hydraulik kann auch von der Zugmaschine angeschlossen werden), Funk- und Kabelfernbedienung. Reifen zwischen 50 und 80%. Zubehörangaben ohne Gewähr, Änderungen, Zwischenverkauf und Irrtümer vorbehalten! Dujdsxc Nztopfx Al Het

Stanje: novo, največja dovoljena obremenitev: 31.500 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, Priekaba Wiese ar trijų ašių važiuokle, kėlimo stalu ir atverčiamu galu. Idealiai tinka šakinių krautuvų ir (arba) darbo platformų pervežimui. Techninės specifikacijos. Duodpjvw Hmtofx Al Hst 3 x 10 t ašys Pakeliama ašis Valdoma ašis su „Smart Steering“ (vairavimas į priekį ir atgal) Išorinio rėmo važiuoklė su nuolydžiu Galinė konstrukcija, tinkama 18 t, pritaikyta 2- ir 3-ašių vilkikams Hidraulinis kėlimo stalas reguliuojamas 3 pozicijose Atverčiamas galas su hidrauliniais išstumiamais elementais, tinkamas naudoti kaip užvažiavimo rampos, pervažiavimo rampos arba kaip pakrovimo platforma (Bendro ilgio sumažinimas pakėlus galą vertikaliai) Nuotolinis valdymas rampoms ir kėlimo stalui Priekinė sienelė Grotelinis grindų paviršius Daug tvirtinimo taškų „SmartBoard“ sistema Centrinė tepimo sistema Plieninė konstrukcija, cinkuota ir nudažyta Galima įsigyti daugybę papildomų pasirinkimų, pvz.: - Gervė - Įrankių dėžė ant priekabos pakopos - Aliuminiai ratlankiai Daugiau informacijos pagal užklausą.

Stanje: rabljeno, največja dovoljena obremenitev: 27.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2005, Leto izdelave: 2005, Oprema: ABS, Empl 3-osna nizkopodni priklopnik, zadnja os prisilno vodena, hidravlične dvojne rampe preko lastne NATO hidravlične črpalke. Duedjx Sbpqjpfx Al Hst Lastna teža: 7.300 kg Nosilnost: 27.700 kg Dolžina: 13,2 m Stanje: zelo dobro Pnevmatike: 70%

Stanje: rabljeno, skupna masa: 37.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, naslednji pregled (TÜV): 07/2026, Leto izdelave: 2018, Oprema: ABS, * Doll Fahrzeugbau 2-osno nizkopodna prikolica za gozdarske stroje, tip T2H-0L * Zračno vzmetenje Dujdpfoyxb Tvex Al Het * Hidravlično vodene osi * Daljinsko upravljanje * Skupna dolžina 16,70 m * Dolžina nizkega podna 9,50 m * Širina 2,55 m * Skupna teža 37.000 kg (tehnično možno 39.000 kg) * Lastna teža 10.360 kg * Možna nosilnost 27.640 kg * Pnevmatična velikost 235/75 R17,5 * Dvojna montaža * Rampe * BPW osi Tehnični pregled/SP do 01/2027