Stas S300Zx*Schubboden*92M³*Fernbedienung*2Xliftachse nakup rabljenega (5.723)

Stanje: novo, največja dovoljena obremenitev: 30.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.664 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles, controlled via the EBS-E system ----Suspension: * Air suspension with lifting and lowering function (automatic lowering during tipping – can be manually blocked via SmartBoard or by switch on the chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * Start assist activated via button in the truck – no truck-side installation required – as well as by pressing the brake pedal three times * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (activated via reverse gear) Gusdpfx Aiswgg Uzeajf * 1 LED work light each on the side at the support legs ----General Equipment: * Aluminum air tanks * Weweler crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox on left side approx. 860 x 520 x 500 mm * Air blow gun with 16 m hose reel in toolbox * Closed single plastic mudguards * 1 dust bag incl. holder on right side * 3m aluminum ladder stored on right above mudguards * Shovel and broom holders on left above mudguards * Load pressure gauge mounted at the front of the chassis * Access steps and standing platform mounted at the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping trough – rectangular – with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted on inside of the left front wall of the body * Smooth side walls inside and outside * Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inside and 2 mm outside * Side wall profiles continuously welded inside, 90° corners with right-angled profile between floor and side walls – ensures the full floor width can be used * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor with 110 Brinell quality * Combination double-wing rear doors – upright, with double hinges and reinforcement profiles, each with grain shoot and all-round rubber seal * When doors are open, they are fixed by chains to lie flat against the side walls * Fourfold lower door locking hooks automatically open during tipping – can be pneumatically locked using valve on the frame ----Roll Cover: * Roll tarp – in RAL 9005 deep black – with three side tension belts * Trapezoidal tarp support 150 mm high on front wall and rear tailgate ----Load Volume: * Load volume 51.8 m³ ----Fifth Wheel Height: * Fifth wheel height 1,150 mm ----Info: * Superstructure and chassis painted with acrylic paint in RAL 9005 deep black * --Permissible gross weight of 39,000 kg technically possible-- * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 33.370 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2014, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.160 mm, Oprema: ABS, Stas S300CX izolirani asfaltni kiper Prva registracija Godex Txmispfx Aiasuf MB osi z disk zavorami, ABS in EBS Zračno vzmetenje Smartboard Serijska številka: YE6S300CXD0001049 Pnevmatike: 385/65 R22,5 35% Skupna teža: 39.000 kg, lastna teža: 5.630 kg, nosilnost: 33.370 kg Delovni podest Ročna ponjava 3x žitna zaporna loputa Poklopna zaščita proti podletu Box: D-8,50 m, Š-2,35 m, V-1,50 m = 30 m3 Izdelano za ADR homologacijo Pridržujemo si pravico do napak/tipkarskih napak in vmesne prodaje.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 56 m³, Oprema: ABS, Chassis – Lightweight Version Made from aluminium (15-6-12) Two fully automated welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Gedpfx Aisfi Nmueajuf Axles and Suspension - 430 mm disc brakes - Jost (ex Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, air bellows centrally positioned on the chassis longitudinal member - 1st axle liftable with start-up aid and manual forced lowering - Smart Board Info Center - Raise/lower valve - BVA brake wear indicator Tyres and Wheels - 6 wheels with 385/65 R22.5 tyres from selected manufacturers, steel rims 11.75 x 22.5 ET 120 Landing Gear - Mechanical version with single-sided operation, 2-speed gearbox, swiveling foot for air suspension Brake System - According to E.G. standard, two-line Wabco system, spring-loaded parking brake on two axles, and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Info Center, aluminium air reservoir system Electrical System - According to German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck Ecopoint 2 lights, 24V system with 2 x 7- and 1 x 5-pin sockets, side marker lights, 2 separate LED reversing lights at the rear, 1 LED interior light Tipping Body / Body Construction (fully welded interior) - Aluminium tipper body - Sidewalls: 30 mm thick plank profiles (2–3 mm), welded 600 mm wide - Floor: 8 mm high-wear resistant alloy (5383H34/HB 110) - Front wall: 4 mm reinforced, straight version - Rear wall: Universal door, straight version with 2 wing doors in 2/3-1/3 division with one grain chute, or optional in 1/2-1/2 version with one grain chute per door - Aluminium round profile sealing at rear doors (side and bottom) - Rear doors partially smooth aluminium-plated - Universal door operation: pneumatically automatic with separate lever lock - Aluminium swing-out rear canopy - 2 hold-down devices with rubber buffers on tipping body frame at the front wall Hydraulic System – Tipping Cylinder with Large Housing - Hydraulic cylinder mounted on the front wall, max. working pressure 150 bar, manufacturer Edbro - Approx. 2.5 m hydraulic hose and 1" loose half coupling - Tipping angle approx. 48° Accessories - 6 Parlok mudguards - Complete splash apron covering the entire vehicle width mounted to the underrun protection - Aluminium spare wheel holder - Right-side foldable side underrun guard - Large toolbox type 860 - Approx. 3 m aluminium ladder - 3 aluminium pivoting bows approx. 150 mm raised in the middle - Additional centrally mounted bow bracket for a total of 2 bows to increase loading width - Rolling tarpaulin with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with roll tarp system, perimeter rubber cord at the rear closure of the tarp with two hooks to fix at rear pivoting bow - Walkway on chassis frame painted in chassis color - Tarpaulin quick release lock - Rear tarp closure with welded-in rubber seal for water ingress protection - Robust, foldable underrun protection with two towing eyes left and right incl. pin - 2 "Clear-Pass" splash guards on the fenders (EG standard) - Aluminium grain funnel with sack, mounted on the side of the frame - Holder for shovel, broom, and scraper above the axles +€590 delivery charge Available in 50 m³ – 56 m³ Loading compartment length: 9,700 mm and 10,500 mm * Price varies according to equipment configuration

Stanje: rabljeno, skupna masa: 39.000 kg, prva registracija: 01/2013, naslednji pregled (TÜV): 07/2025, Oprema: ABS, Volume tipper 59 cubic meters All-aluminium construction Unladen weight: 7,570 kg SAF axles with disc brakes Tyres: 60% tread remaining Good condition Belgian registration Gedpfsvwhvpox Aiaouf Price: €23,900 net

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2000, skupna dolžina: 10.200 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 385/65 R22,5, Leto izdelave: 2000, Oprema: ABS, = Dodatne možnosti in oprema = - Listnato vzmetenje = Dodatne informacije = Dimenzija pnevmatik: 385/65 R22,5 Znamka osi: ROR Vzmetenje: Parabolično vzmetenje Lastna masa: 5.880 kg Gusdpezam A Dofx Aiaof Nosilnost: 32.120 kg DGV: 38.000 kg Kiper: Zadnji

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2007, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.400 mm, vzmetenje: zrak, velikost pnevmatike: 385/65r22,5, medosna razdalja: 1.250 mm, Leto izdelave: 2007, Velikost pnevmatike: 385/65R22,5 Vzmetenje: Zračno vzmetenje Pogon: Kolo Lastna teža: 5.300 kg Nosilnost: 33.700 kg Dovoljena skupna masa: 39.000 kg Znamka nadgradnje: STAS Gusdjyx Dgxspfx Aiaof Kiper: Zadnji

Stanje: novo, največja dovoljena obremenitev: 27.976 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.150 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 2.290 mm, prostornina tovornega prostora: 55 m³, Oprema: ABS, Stock no. 5627 Available immediately! Purchase, rent, or rent with a purchase option by arrangement! Approx. 55m³ Stas steel tipping trailer for scrap / swing doors / alloy wheels / immediately available — * Manufacturer: Stas * Model: Ferrostar - Steel tipping trailer * First registration: - (New vehicle) * Gross weight: 36,000 kg * Unladen weight according to manufacturer: 8,024 kg * Payload: 27,976 kg * Axles: 3x SAF axles / 1st axle with lift function / traction aid / disc brakes * Suspension: Air suspension with raise/lower function * Tires: 385/65 R 22.5 on Speedline Diamond alloy wheels * Volume: approx. 55m³ (10.15m long x 2.33m wide x 2.29m high) * Color: Chassis RAL 9005, body RAL 9005, tarpaulin SIO 7999 * EBS * Swing door (split 1/2 to 1/2) with additional pneumatic locking system * Full-perimeter rubber seal for swing door * 1x discharge slide in right-hand door * Front left internal step into body * Front operator platform made of aluminum with left-hand access * Central tarpaulin locking system * 2 roof bows (1x center + 1x rear) * Aluminum sheet for tarpaulin protection * Coupling height 1.20m * Floor: 5mm HB450 * Side walls: 4/3mm HB450 * Front wall: 3mm HB450 * Rear wall: 3mm HB450 * Automatic lowering during tipping * Loading pressure gauge * Wabco Smartboard * Approx. 2.8m aluminum ladder on the right * Individual mudguards * Full load aluminum landing supports (drop supports) * Shovel and broom holder right side * 1x toolbox left * 1x LED work light left * 1x LED work light right * LED reversing spotlights * LED rear lights * Folding underrun protection * Tire pressure monitoring (Wabco Trailerpulse) * A-sign Available immediately! Purchase, rent, or rent with a purchase option by arrangement! Notice regarding possible errors in this advertisement: Gedpfx Aexpb Ufsiaouf Despite careful preparation, mistakes may occasionally occur in the text or details. We accept no liability for errors, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or address further questions.

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2001, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Gedpfx Aieyda E Hsaeuf Ponjava 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg = Dodatne informacije = Prazna masa: 5.260 kg Nosilnost: 33.740 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2008, Oprema: ABS, Stas S 339 CX Letnik izdelave: 2008 Zračno vzmetenje 3-osni Ponjava 2 x podporni nogi Polkrožni prekucnik = Dodatne informacije = Gjdpfjydavxsx Aiasuf Lastna teža: 6.800 kg Nosilnost: 32.200 kg Dovoljena skupna masa: 39.000 kg

Stanje: rabljeno, lastna masa: 6.340 kg, skupna masa: 39.000 kg, Leto izdelave: 2002, Oprema: ABS, STAS SA339K/ALU Year of manufacture: 2002 Gusdsvdru Ajpfx Aiasf 3 axles ABS Air suspension Gross weight: 39,000 kg Unladen weight: 6,340 kg

Stanje: rabljeno, lastna masa: 5.635 kg, skupna masa: 36.000 kg, Leto izdelave: 2015, Oprema: ABS, STAS / ALU / TARPAULIN Gedpfx Aevdrtloiaouf Year of manufacture: 2015 2 axles Unladen weight: 5,635 kg Gross weight: 36,000 kg ABS EBS

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle lift with traction aid and electric operation, raise & lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" king pin bolted into a 10mm plate, mechanical landing gear with single-side operation, braking system per EEC standard, Westinghouse two-line system, spring brakes on two axles and EBS electronic system Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per StVZO with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, Edbro hydraulic system with approx. 2m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on the tailgate, prepared for vibrating plate, mud-tight! ADDITIONAL EQUIPMENT AVAILABLE TO ORDER AS REQUESTED COLOR FREELY CHOOSABLE Guodpou Dvw Eofx Aiasf +590€ delivery costs *Pictures and offers non-binding*

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection. Gusdoyh S Aiepfx Aiajf

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Gsdjfakkcepfx Aiajuf Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, traction aid, and electric operation, raising and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with unilateral operation, braking system according to EEC standards, two-line system, spring actuators acting on two axles, EBS electronic brake system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system in accordance with StVZO regulations, 2 five-chamber tail lights (Aspöck type), 24-volt system, aluminum tipper body, Edbro brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, continuous sealing rubber, spindle locks on the rear door; tipper body optionally also available with mud-tight seal! Godpfx Aieu Dvw Soajuf Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. FURTHER EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +€590 delivery costs Also available in versions Z9-Z13 *Images and offers subject to change*

Stanje: novo, največja dovoljena obremenitev: 28.840 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.660 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.350 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, STRONG & LIGHT, now also available for heavy-duty applications, from 40 m³ loading volume and 6,600 kg. High-quality aluminium chassis with high-strength steel body, ACTUAL 7,160 KG. Chassis with 3x 9t DCA axles, equipped with 430 mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting aid, aluminium drop-down landing legs (can be decoupled when loaded), foldable underrun protection, digital load gauge for axle load indication, toolbox, access ladder. Godpfxshfiqce Aiaouf Body made from HB450 steel sheets, floor 5 mm thick, side walls and rear doors made from 4 mm HB450 steel sheets. Rear doors split 1/2 - 1/2 with a grain chute on the right, rear doors can be unlocked from the rear, doors sealed with round steel bar (optionally with rubber seal – mud-tight), roll tarp with central support tube, aluminium splash guard to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long casing, loading height = 3,650 mm. (The vehicles shown are partly equipped with special options) Further equipment details and a comprehensive vehicle quotation are available upon request. Various loading volumes, vehicle lengths, and heights are possible. Painting and equipment according to customer specifications. +€500 delivery charge Offers and images are subject to change.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2001, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 1.400 mm, skupna dolžina: 9.860 mm, skupna višina: 2.900 mm, vzmetenje: zrak, stanje pnevmatik: 25 odstotek, Leto izdelave: 2001, Profil pnevmatik: 25 % Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Gujdpfouzn N Isx Aiaof Lastna teža: 6.080 kg Nosilnost: 31.920 kg Skupna dovoljena masa: 38.000 kg = Podatki o podjetju = Ob povpraševanju vedno navedite številko zaloge (8 številk) Pri SMZ Smeets & Zonen: - na trgu od 1976, že 65.000 prodanih/1700 na leto/1000 na zalogi - Popolna storitev od A do Ž, podpora pri transportu/organiziramo carinske tablice (ekstra!) - Možnost nakladanja za najcenejši transport po svetu Veliko skladišče za vse nove in rabljene dele: Vedno oglašujemo z našimi najboljšimi cenami Obiščite nas za popoln zalog in informacije Sprejmemo vas na 130.000 m2 zemljišča z 20.000 m2 skladišča in popolnoma opremljeno delavnico. Oglejte si naš video

Stanje: rabljeno, lastna masa: 11.245 kg, skupna masa: 36.000 kg, Leto izdelave: 2009, Oprema: ABS, STAS/ALU/TIPPER Year of manufacture: 10/2009 Gsdpfxovdrt Se Aiasuf 2 axles Gross weight: 36,000 kg Unladen weight: 11,245 kg ABS

Stanje: rabljeno, številka stroja/vozila: YE6SZ339V600R0459, konfiguracija osi: 3 osi, prva registracija: 07/2006, dolžina tovornega prostora: 13.350 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.750 mm, skupna dolžina: 13.950 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2006, Oprema: ABS, = Más opciones y accesorios = - Hidráulica = Notas = Chasis Altura del chasis: 100 cm Altura del perno de acoplamiento / barra de tiro: 120 cm Estructura Hidráulica: ✓ Depósito Combustible: ✓ = Más información = Configuración de ejes Tamaño de neumáticos: 385/65 R22.5 Marca de ejes: Mercedes Frenos: Frenos de disco Suspensión: Suspensión neumática Eje 1: Perfil neumático izquierdo: 65%; perfil derecho: 10% Eje 2: Perfil neumático izquierdo: 75%; perfil derecho: 15% Eje 3: Perfil neumático izquierdo: 70%; perfil derecho: 15% Pesos Peso en vacío: 7.960 kg Carga útil: 31.040 kg Peso bruto: 39.000 kg Guedpfx Aioyq R Ryoaof Funcional Carrocería: Stas Altura de la plataforma de carga: 110 cm Identificación Matrícula: QAZ297 = Información de la empresa = Para más información sobre esta unidad, por favor llame o envíe un correo electrónico a: . Puede consultar el inventario completo en: . No olvide suscribirse a nuestro boletín para recibir actualizaciones semanales sobre nuestro stock.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2013, dolžina tovornega prostora: 8.400 mm, širina tovornega prostora: 2.390 mm, višina nakladalnega prostora: 1.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 1.310 mm, Leto izdelave: 2013, Dimenzija pnevmatike: 385/65R22,5 Vzmetenje: zračno vzmetenje Pogon: kolo Guedpewzkx Tofx Aiasf Lastna teža: 5.590 kg Nosilnost: 33.410 kg Skupna dovoljena masa: 39.000 kg Znamka nadgradnje: STAS Kiper: zadaj

Stanje: rabljeno, največja dovoljena obremenitev: 23.690 kg, skupna masa: 25.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2012, naslednji pregled (TÜV): 10/2025, Leto izdelave: 2012, Oprema: ABS, * Peischl prikolica s premikalno ploščjo * Letnik: 2012 Guodpozrkkusfx Aiajf * Lastna teža: 1310 kg – Skupna teža: 25000 kg * Nosilnost: 23690 kg * Vse navedene informacije so brez jamstva za pravilnost. * Pridržana možnost spremembe in prodaje.

Stanje: rabljeno, prevoženi kilometri: 439.518 km, moč: 331 kW (450,03 KM), prva registracija: 06/2014, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, navigacijski sistem, Vzmetenje s pomočjo zračnih blazin, strešno okno, zračni sedež, ogrevani zunanji ogledali, električni zunanji ogledali, pomožni pogon, dvojne pnevmatike, rabljeno vozilo. Guedpfozuh Rwex Aiajf Številka vozila: 3400, ABS, TC, tempomat, večfunkcijski volan, udoben sedež voznika s funkcijo ogrevanja, avtomatska klimatska naprava, kabina CR16L, zadnja stena z oknom, retarder, menjalnik Scania Optic Cruise s pedalom za sklopko, kamera za vzvratno vožnjo, navigacija, prazna teža: 14.360 kg, skupna teža: 32.000 kg, zaklep diferenciala, pomoč pri speljevanju v klanec, prikolica Fliegl, tip ASW Stone 5215, s pokrovom. Pri vprašanjih nas kontaktirajte. Pridržujemo si pravico do sprememb in napak.

Stanje: rabljeno, največja dovoljena obremenitev: 31.229 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 02/2027, prostornina tovornega prostora: 92 m³, Oprema: ABS, Zaradi številnih lažnih (phishing) in neželenih (spam) e-poštnih sporočil lahko obravnavamo e-poštna povpraševanja le, če navedete VELJAVNO telefonsko številko! Na žalost ne moremo obdelati e-poštnih povpraševanj, ki ne vsebujejo telefonske številke! Prosimo za vaše razumevanje! Za telefonska povpraševanja in povpraševanja prek WhatsAppa: * Celoten tovornjak s prikolico DAF XF 480, prvič registriran 01/2021 * S prikolico Kraker so bili prevažani le lahki tovorji (lesni sekanci, staro papirje,...) * Prostornina: 92 m³ * Vgrajen visokotlačni čistilec * Brezžični daljinski upravljalnik * Dvigalna os * Os BPW s kolutno zavoro * Pomikalna ponjava Gusdozr Tfuepfx Aiasf * Prazna teža: približno 7.771 kg * Pnevmatike: 385/65 R 22,5 * Globina profila: 13/10, 15/9, 11/11 mm Ponujena cena se nanaša samo na prikolico Kraker Walkingfloor! Pridržujemo si pravico do spremembe cene in napak.

Stanje: novo, lastna masa: 8.367 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 87 m³, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, Knapen K600 moving floor trailer | Side doors | 13 pairs of lashing rings in side profile | Rolling tarpaulin, standing platform | BPW axles with disc brakes | 1 lift axle | Spare wheel holder | Aluminum rims (ALCOA Ultra One alloy rims) | Toolbox | Unladen weight: 8,367 kg | 6 mm floor, 21 planks | Additional hydraulic connections mounted at the landing legs including fitted hose guides | Rim size 22.5 x 11.75 | | Ex works price | Subject to error, input mistakes, and prior sale. Guedpsv Tnhdefx Aiaof

Stanje: novo, lastna masa: 7.900 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Knapen K100 new vehicle 92 m³ | 13 lashing rings | 10 mm floor | 900 g/m² sliding roof tarp | BPW axles | lift axle | 2x toolboxes | 2x work lights | 92 m³ | hydraulic connections on the support legs with thrust compensation | ladder on side underrun protection | Subject to errors, input mistakes, and prior sale. Godpfoy Uk S Hex Aiajuf