Stas S300Cx 55M3 Alu,Coil nakup rabljenega (8.381)

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Bsdpjyh S Aijfx Al Hslg Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Bsdpfjfi Nmwox Al Holg Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2000, Stas S 3SA 334K Bedpoydb R Rsfx Al Helg Leto izdelave: 2000 3-osni Zračno vzmetenje Ponjava 2 x podporni nogi Lastna teža: 5.260 kg Največja dovoljena masa: 38.000 kg = Dodatne informacije = Prazna teža: 5.260 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2000, Stas S 3SA 334K Letnik: 2000 3-osni Zračno vzmetenje Ponjava 2 nosilca Lastna teža: 5.260 kg Skupna dovoljena masa: 38.000 kg Bjdpfx Alsyda Tds Holg = Dodatne informacije = Lastna masa: 5.260 kg Nosilnost: 32.740 kg Skupna dovoljena masa: 38.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2001, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Bedpeyda E Hefx Al Helg Ponjava 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg = Dodatne informacije = Prazna masa: 5.260 kg Nosilnost: 33.740 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2008, Oprema: ABS, Stas S 339 CX Letnik izdelave: 2008 Zračno vzmetenje Blodpfx Aljydavxe Heg 3-osni Ponjava 2 x podporni nogi Polkrožni prekucnik = Dodatne informacije = Lastna teža: 6.800 kg Nosilnost: 32.200 kg Dovoljena skupna masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2015, Oprema: ABS, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Ponjava 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg = Dodatne informacije = Prazna masa: 5.260 kg Bljdpfx Ajydargsl Hjg Nosilnost: 33.740 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2008, Stas S 339 CX Letnik: 2008 3-osni Zračno vzmetenje Ponjava Bedpfsyc U Uaex Al Hslg 2 x opori Lastna teža: 4.890 kg Največja dovoljena masa: 39.000 kg = Dodatne informacije = Lastna teža: 4.890 kg Nosilnost: 34.110 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, lastna masa: 7.910 kg, največja dovoljena obremenitev: 31.090 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, stanje pnevmatik: 40 odstotek, barva: srebrn, Leto izdelave: 2018, velikost sprednje pnevmatike: 385/65 22,5, velikost zadnje pnevmatike: 385/65 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 40573 Stas, S 300CX * Year of manufacture: 2018 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Air line coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage/toolbox * Aluminium tipping body * Platform * Sliding tarpaulin * Grain outlet slider * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,910 kg * Payload: 31,090 kg * Permissible gross weight: 39,000 kg * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Wabco SmartBoard * Rear support * Wear plates left and right * Folding underrun protection Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes e.g.: * Purchase / sale / rental of commercial vehicles * Quick, hassle-free financing * Processing all (export) documents * Ordering of export / customs number plates * Vehicle preparation: New tarpaulins, decals, painting, etc. * Professional loading / load securing * TÜV approvals, registration service Bedpfxjyicqye Al Hjlg * Transfer and delivery of commercial vehicles Consult our trained specialists – we are happy to advise you.

Stanje: rabljeno, največja dovoljena obremenitev: 28.150 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, prostornina tovornega prostora: 92 m³, Leto izdelave: 2019, Oprema: ABS, * Stas 3-axle Walking Floor S300ZX * 10 mm floor * approx. 92 m³ * Radio remote control * Roll tarp * Air suspension Blodpfsw H Hprsx Al Hsg * 2x lift axles * Disc brakes * JOST axles * EBS * ABS

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvižna os * ALU platišča * JOST osi Bodpfow Rit Tsx Al Hjlg * Pomikajoča cerada * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje Podpora preko WhatsAppa na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 56 m³, Oprema: ABS, Chassis – Lightweight Version Made from aluminium (15-6-12) Two fully automated welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Axles and Suspension - 430 mm disc brakes - Jost (ex Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, air bellows centrally positioned on the chassis longitudinal member - 1st axle liftable with start-up aid and manual forced lowering - Smart Board Info Center - Raise/lower valve - BVA brake wear indicator Tyres and Wheels - 6 wheels with 385/65 R22.5 tyres from selected manufacturers, steel rims 11.75 x 22.5 ET 120 Landing Gear - Mechanical version with single-sided operation, 2-speed gearbox, swiveling foot for air suspension Brake System - According to E.G. standard, two-line Wabco system, spring-loaded parking brake on two axles, and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Info Center, aluminium air reservoir system Electrical System - According to German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck Ecopoint 2 lights, 24V system with 2 x 7- and 1 x 5-pin sockets, side marker lights, 2 separate LED reversing lights at the rear, 1 LED interior light Tipping Body / Body Construction (fully welded interior) - Aluminium tipper body - Sidewalls: 30 mm thick plank profiles (2–3 mm), welded 600 mm wide - Floor: 8 mm high-wear resistant alloy (5383H34/HB 110) - Front wall: 4 mm reinforced, straight version - Rear wall: Universal door, straight version with 2 wing doors in 2/3-1/3 division with one grain chute, or optional in 1/2-1/2 version with one grain chute per door - Aluminium round profile sealing at rear doors (side and bottom) - Rear doors partially smooth aluminium-plated - Universal door operation: pneumatically automatic with separate lever lock - Aluminium swing-out rear canopy - 2 hold-down devices with rubber buffers on tipping body frame at the front wall Hydraulic System – Tipping Cylinder with Large Housing - Hydraulic cylinder mounted on the front wall, max. working pressure 150 bar, manufacturer Edbro - Approx. 2.5 m hydraulic hose and 1" loose half coupling - Tipping angle approx. 48° Accessories - 6 Parlok mudguards - Complete splash apron covering the entire vehicle width mounted to the underrun protection - Aluminium spare wheel holder - Right-side foldable side underrun guard - Large toolbox type 860 - Approx. 3 m aluminium ladder - 3 aluminium pivoting bows approx. 150 mm raised in the middle - Additional centrally mounted bow bracket for a total of 2 bows to increase loading width - Rolling tarpaulin with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with roll tarp system, perimeter rubber cord at the rear closure of the tarp with two hooks to fix at rear pivoting bow - Walkway on chassis frame painted in chassis color - Tarpaulin quick release lock - Rear tarp closure with welded-in rubber seal for water ingress protection Blodpefi Nmusfx Al Heg - Robust, foldable underrun protection with two towing eyes left and right incl. pin - 2 "Clear-Pass" splash guards on the fenders (EG standard) - Aluminium grain funnel with sack, mounted on the side of the frame - Holder for shovel, broom, and scraper above the axles +€590 delivery charge Available in 50 m³ – 56 m³ Loading compartment length: 9,700 mm and 10,500 mm * Price varies according to equipment configuration

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle lift with traction aid and electric operation, raise & lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" king pin bolted into a 10mm plate, mechanical landing gear with single-side operation, braking system per EEC standard, Westinghouse two-line system, spring brakes on two axles and EBS electronic system Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per StVZO with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, Edbro hydraulic system with approx. 2m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on the tailgate, prepared for vibrating plate, mud-tight! Bsdpfx Alou Dvw Es Holg ADDITIONAL EQUIPMENT AVAILABLE TO ORDER AS REQUESTED COLOR FREELY CHOOSABLE +590€ delivery costs *Pictures and offers non-binding*

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Bodpfx Alsfi Nmpo Helg Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Bledpfx Alogcw Rio Heg Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, traction aid, and electric operation, raising and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with unilateral operation, braking system according to EEC standards, two-line system, spring actuators acting on two axles, EBS electronic brake system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system in accordance with StVZO regulations, 2 five-chamber tail lights (Aspöck type), 24-volt system, aluminum tipper body, Edbro brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, continuous sealing rubber, spindle locks on the rear door; tipper body optionally also available with mud-tight seal! Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. FURTHER EQUIPMENT AVAILABLE ON REQUEST Bjdpfx Alou Dvw Sj Hslg COLOR FREELY CHOICEABLE +€590 delivery costs Also available in versions Z9-Z13 *Images and offers subject to change*

Stanje: novo, največja dovoljena obremenitev: 28.840 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.660 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.350 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, STRONG & LIGHT, now also available for heavy-duty applications, from 40 m³ loading volume and 6,600 kg. High-quality aluminium chassis with high-strength steel body, ACTUAL 7,160 KG. Chassis with 3x 9t DCA axles, equipped with 430 mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting aid, aluminium drop-down landing legs (can be decoupled when loaded), foldable underrun protection, digital load gauge for axle load indication, toolbox, access ladder. Blsdpjhfiqcjfx Al Hog Body made from HB450 steel sheets, floor 5 mm thick, side walls and rear doors made from 4 mm HB450 steel sheets. Rear doors split 1/2 - 1/2 with a grain chute on the right, rear doors can be unlocked from the rear, doors sealed with round steel bar (optionally with rubber seal – mud-tight), roll tarp with central support tube, aluminium splash guard to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long casing, loading height = 3,650 mm. (The vehicles shown are partly equipped with special options) Further equipment details and a comprehensive vehicle quotation are available upon request. Various loading volumes, vehicle lengths, and heights are possible. Painting and equipment according to customer specifications. +€500 delivery charge Offers and images are subject to change.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.179 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.800 mm, Oprema: ABS, * Stas premična tla * Pokrivna ponjava * ALU platišča Blodpsxu Th Ujfx Al Hsg * SAF osi * Lastna teža: 7790 kg * Leto izdelave: Interna številka vozila: 11498-----Pridržane so napake in vmesna prodaja

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.435 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.690 mm, * JOST axles * Air suspension * Lift axle * Wabco SmartBoard * Storage box * Aluminum rims Bledpfov Hlwisx Al Hsg * Tarpaulin cover -----Internal vehicle number: 10290----Subject to errors and prior sale.

Stanje: novo, največja dovoljena obremenitev: 29.560 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Oprema: ABS, Stock no. 5640 Purchase, rent, or rent with a purchase option by arrangement! Bljdsxl Ntuepfx Al Heg Approx. 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS * Model: FARMSTAR – Agricultural Moving Floor Trailer * First registration: - (new vehicle) * Colour: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500 * Capacity: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle lift axle + traction aid / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25 m * Suspension: Air suspension with raise and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer’s spec): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and rear left operating console * 21-board floor system, 6 mm ribbed * Welded aluminium end caps * Rear closure plate in aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue discharge wall with brushes and stainless steel handles * Front wall made of aluminium plank profiles * Service door in front wall * Side walls with smooth finish inside and out (grain specification), fully welded * Observation window on left rear side wall * Swing doors (50/50) * 4x locking rods * Swivelling cross member at the door closure * Hydraulic connections front with 3 m hoses and * Connection possibility under body without hoses * Pressure 1" female * Return 1" female * Operator’s platform with steps front left and right * Fifth wheel height: 1,150 mm * Single wheel mudguards * Heavy-duty landing legs * Rolling tarpaulin (900g/m²) with quick-lock system * Foldable aluminium roof bows * Foldable aluminium rear light protection * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left * 1x aluminium step ladder, 2x 8-steps, mounted right * 1x extendable ladder at rear, right side * Smartboard * TPMS tyre pressure monitoring system * 5-chamber LED tail lights * 2x LED work lights in front of axles * 2x LED reversing lights rear * 1x LED work light, front wall interior * 2 x 3-function lamps installed in upper door cross member Purchase, rent, or rent with a purchase option by arrangement! Notice regarding possible errors in the listing: Despite careful creation of the listing, there may occasionally be errors in the text or details provided. We accept no liability for errors, changes, or prior sale. All information is without guarantee. Please contact us to verify details or for further inquiries.

Stanje: rabljeno, lastna masa: 7.450 kg, največja dovoljena obremenitev: 25.550 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2006, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Krone SD Tautliner | Edscher pomično streho | Mercedes osi z disk zavorami | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | Oprema za kolute | Pridržujemo si pravico do napak, vnosa in predhodne prodaje. | Prodaja samo pravnim osebam Bsdpfx Ajy Izy Uel Hjlg

Stanje: rabljeno, lastna masa: 3.660 kg, največja dovoljena obremenitev: 14.340 kg, skupna masa: 18.000 kg, prva registracija: 02/2015, dolžina tovornega prostora: 6.820 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 720 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, medosna razdalja: 5.050 mm, barva: siv, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, (EN) Mafa Andres AG Type L 18/68e platform trailer - Air suspension - SAF axles - Aluminum floor - Unladen weight: 3,660 kg - Loading area: 6.82 x 2.47 x 0.72 m - Air/Air suspension system - Disc brakes - Wheelbase: 5.05 m - 1st owner We also buy your truck or accept it as a trade-in. Online inspection via WhatsApp and Viber possible. We can arrange delivery to your address in Germany and Europe or to international ports at an additional cost. Upon request, we can provide remote quality assurance for you by performing a TÜV/MOT (subject to a fee). Blodjy Ihuxjpfx Al Hog Fast and simple financing solutions available for customers in Germany. For export outside the EU, the legal VAT must be deposited as collateral. Subject to errors and prior sale. For more offers, please visit our website. We are happy to answer all your enquiries. Languages spoken: German and English. Also: Czech, French, Russian, Bulgarian. All data provided without guarantee, including all equipment and accessories.

Stanje: rabljeno, prevoženi kilometri: 438.446 km, moč: 294 kW (399,73 KM), prva registracija: 01/2016, vrsta goriva: dizel, lastna masa: 13.300 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 32.000 kg, konfiguracija osi: 8x4, medosna razdalja: 4.300 mm, zavore: retarder, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), hidravlika, klimatska naprava, računalnik na krovu, tempomat, zapora diferenciala, MAN TGS 35.400 hákový nosič kontejnerů, emisní norma Euro 6, rozložení kol 8x4, automatická převodovka, Pritarder, hákový mechanismus Hiab XR26Z56, klimatizace, pérování listové/vzduchové, hliníkové ráfky, tempomat, pohotovostní hmotnost 13 300 kg, rozvor 4,30 m, pneumatiky 6/7/7/8 mm, 1. majitel, video na vyžádání. Vykupujeme Váš nákladní vůz nebo jej přijmeme na protiúčet. Online prohlídka vozu přes WhatsApp a Viber. Dopravu k Vám v rámci Německa, EU, nebo do vybraných mezinárodních přístavů zajistíme za příplatek. Na přání nabízíme vzdálenou kontrolu kvality, včetně zajištění TÜV (za poplatek). Rychlé a jednoduché financování pro zákazníky z Německa. Při exportu mimo EU je nutné složit zákonnou DPH jako kauci. Možné chyby a mezitímní prodej vyhrazeny. Další nabídky najdete na našich webových stránkách. Rádi odpovíme na všechny Vaše dotazy. Domluvíme se česky, francouzsky, rusky, bulharsky, německy i anglicky. Veškeré údaje jsou bez záruky včetně výbavy a příslušenství. Bodpfjv Hyk Dsx Al Hjlg

Stanje: rabljeno, lastna masa: 7.360 kg, največja dovoljena obremenitev: 25.640 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, Oprema: ABS, | Krone SD Tautliner | Edscha drsna streha | Korito za kolute | BPW osi z disk zavorami | Orodjarna | Pnevmatike: 385/65 R22.5 | Perforiran okvir za pritrjevanje tovora | Pridržujemo si pravico do napak, sprememb in predčasne prodaje. Bsdpfx Aloy E R I Aj Holg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 122.218 km, moč: 78 kW (106,05 KM), prva registracija: 01/2014, vrsta goriva: dizel, skupna masa: 3.500 kg, stanje pnevmatik: 80 odstotek, konfiguracija osi: 4x2, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, število sedežev: 2, Leto izdelave: 2014, obratovalne ure: 3.426 h, Oprema: ABS, servovolan, Iveco Daily Multitel 160 ALU DS - 16m Delovna višina: 16 m Prevoženi kilometri: 122218 km Delovne ure: 3426 Leto izdelave: 2014/01 Emisijski razred: EURO5 Moč: 78 kW Prostornina (ccm): 2287 Tip: Hidravlična delovna ploščad, rabljeno vozilo Gorivo: Diesel Dovoljena skupna masa vozila (GVW): 3500 kg Število sedežev: 2 Bjdpjy Iz Daefx Al Hslg Menjalnik: Ročni menjalnik Prejeto: na zalogi Oprema: ABS, servo volan Opis vozila: Stroj je tehnično v dobrem stanju, motor in hidravlični sistem sta zelo čista in delujeta brezhibno. Cena je NETTO za izvoz. Govorimo: - angleško - nemško - madžarsko