Humbaur Kipper Huk 272715 2,7T Rückwärtskipper E-Pumpe nakup rabljenega (57.443)

Stanje: rabljeno, največja dovoljena obremenitev: 8.700 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 04/2022, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 1.450 mm, Humbaur HTK 115024 tristranski kiper Datum prve registracije 04-2022 Številka šasije WHD115024N1095916 Listnato vzmetenje Skupna masa 11.900 KG Tovorni prostor v mm 5000 x 2420 x 500 Nastavljiv vlečni drog Nihajni zadnji pokrov levo in desno Preklopne zadnje podpore Gujdpfsy Ac R Rjx Apbob Predal za rampe Prednji naslon za roko 10 pritrdilnih ušes Jekleni pod SMB osi Splošno dobro stanje

Stanje: rabljeno, največja dovoljena obremenitev: 13.800 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, skupna širina: 2.550 mm, skupna višina: 1.710 mm, Oprema: dvižna zadnja plošča, Humbaur HTK 185524 Tandem Three-Way Tipper Air Suspension First Registration: 08.01.2019 Inspection (HU): 09/2026 Gross Vehicle Weight: 18,000 kg Unladen Weight: 4,660 kg Payload: 13,340 kg Overall Dimensions: 7,520 mm x 2,550 mm x 1,820 mm Internal Dimensions: 5,500 mm x 2,420 mm x 600 mm Platform KTL Coated Side Panels and Chassis Hot-Dip Galvanized 50 mm Coupling Eye Axles with Drum Brakes Maintenance-Free Parabolic Suspension for Optimal Load Equalization Air Brake System with Release Valve Compressed Air Coupling Heads (red/yellow) Automatic Anti-Lock System (ABS) EBS Brake System High-Quality Steel Drop Sides, Side and Rear Foldable, Removable and Swinging 2 Rear Stabilisers Central Locking Detachable Front Wall Lashing Points in Platform Floor Reinforced 12t Gearbox Support Winch with Load and Rapid Mode Galvanized Central Tube, Continuously Adjustable via Crank Extra-Wide Single Tyres for Low Ground Pressure LED Side Marker Lights Motor-Hydraulic Three-Way Tipping System Gjdpfxsxzx E Se Apbsub Tyres: 435/50 R19.5 Stake Pocket Side Panel Spring Loading Ramps available at an extra cost of €1,500 19% VAT deductible. ATTENTION !!!!! PLEASE READ !!!! We expressly reserve the right to prior sale, as this item is also listed on other marketplaces. We strongly recommend inspection and examination to avoid any misconceptions regarding the condition and suitability by the buyer. Inspections and checks are possible at any time by appointment and are expressly welcomed!!! Illustrations may be similar and contain optional, chargeable accessories. The stated internal measurements are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening Times: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 5.010 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, skupna višina: 2.450 mm, Oprema: ABS, Humbaur HTK 195024 Three-way Tipper SAF Drum * Three-way tipper * Wheelbase: 1,410 mm * Tyres: 385/65 R22.5" * Loading height: approx. 1,520 mm * Drawbar length: approx. 1,900 mm * Coupling height: approx. 850-950 mm * Air suspension with shock absorbers * Drop-side unloading on the left * EBS braking system * SAF axles * Drum brakes * Platform on the front wall * 50 mm towing eye * Reversal-proof coupling heads Red / Yellow * Galvanized drawbar * 4 ball tipping bearings with 2 reversal-proof tipping bearing bolts * Swing tailgate * Fixed underride guard Guedpfx Ajyn Urcjpbob * Hydraulic three-way tipping system operated via the towing vehicle Interim sale and errors expressly reserved! Sale exclusively according to our Terms and Conditions (AGB) Important Notice: Despite carefully checking all details in our offer, errors may occur. These may be due to transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer as defined by §145 BGB. Rather, it is information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Stanje: novo, lastna masa: 3.150 kg, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, HUMBAUR THREE-WAY TIPPER NEW MODEL 2023 (HTK PASS-THROUGH/SMB AXLES) GALA L => INCLUDING PASS-THROUGH DESIGN => AUTOMATIC REAR FLAP RELEASE => CHASSIS FRAME FULLY HOT-DIP GALVANIZED => PLATFORM FRAME FULLY HOT-DIP GALVANIZED => SIDE WALLS FULLY HOT-DIP GALVANIZED Equipment: Permissible total weight: kg Payload: approx. kg Support load: 500 kg Loading area approx. 5020 x 2420 mm Steel side walls approx. 450 mm high Side wall lifting springs (side walls) Fixed drawbar mounted, non-adjustable Reinforced 25 t gearbox support winch (static) with load and rapid gear 8 recessed 3 t lashing rings in platform floor Gjdpjiciulofx Apbeub 2 folding and extendable rear supports (hot-dip galvanized) Dual-circuit ABS compressed air braking system Central locking, side and rear Plastic mudguards with anti-spray system 4x 235/75 R17.5 inch tires 15-pin 24 volt electrical connector for 24 volt lighting 7-pin 24 volt ABS connector Compressed air connections RED and YELLOW Ø 40 mm DIN towing eye Coupling height approx. 800 mm Hydraulic connection: SVK BG3 plug Optional available at extra cost: *Gross vehicle weight increase to kg incl. kg support load = 1,490 EUR net Payload 9,200 kg Stronger brake cylinders and control valves as well as EBS • 2 aluminum ramps with 8 t load capacity, including rail compartment per pair • Surcharge: 2,250 EUR net plus VAT • 1x plastic toolbox • Surcharge: 290 EUR net plus VAT => Delivery freight charges: 2.90 EUR plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale only to business customers!* *Images may differ and are for general reference only => may contain/show accessories available at extra cost*

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, ++Availability upon request++ ++Delivery possible, freight charges upon request++ HTK 754020 Weights Technical gross vehicle weight: 7,500 kg Drawbar load: 500 kg Unladen weight: approx. 2,250 kg Payload with standard equipment: approx. 5,250 kg Dimensions Platform dimensions (L x W x H): approx. 4,000 x 2,030 x 400 mm Side wall height: approx. 400 mm Loading height (unladen): approx. 920 mm Drawbar length (free): approx. 1,900 mm Coupling height (unladen): approx. 560–840 mm Overall dimensions (L x W x H): approx. 6,070 x 2,200 x 1,450 mm Tyres: 4 x 215/75 R 17.5 Tip angle lateral/rear: 45° / 48° Oil requirement: 10 L V-value mechanical: 14.8 V-value pneumatic: 11.1 2 pairs of recessed folding lashing eyes per corner, 3,000 kg each 3 pairs of recessed lashing brackets along loading bed, 2,000 kg each -- Axles Axle units from renowned manufacturers; Suspension Maintenance-free parabolic suspension with load equalisation; Tyres Tyres according to manufacturer’s choice; Brake system ABS braking system according to ECE directive with ALB function; ABS connector ISO 7638; Spindle parking brake; 2x polarity safe coupling heads red/yellow ISO 1728; Electrics 24 V lighting system with multi-chamber rear lights and LED side marker lights; 15-pin plug connector for lights; Towing device Drawbar with 40 mm DIN screw towing eye, galvanised, Infinitely adjustable via crank; Chassis Robust, welded, hot-dip galvanised frame; Lockable recess for 2 optional loading ramps; Equipment Rigid side underrun protection installed from the start of the bed to the 1st axle; Mudguards with splash guards on front and rear axles; 2 wheel chocks with holder; Side and rear contour markings; Space for single-line license plate; Support Heavy-duty automatic jockey wheel; Hydraulics Three-way hydraulic tipper controlled via towing vehicle (max. 200 bar); Five-stage nitrided cylinder with stroke limitation and safety cables; Hydraulic quick coupling SVK BG3 as single-circuit connection; Platform Platform floor made of 4 mm steel plate; Reinforced, hot-dip galvanised platform frame; 4 ball cup bearings with 2 polarity safe tilt bearing bolts; Side Walls Laser-welded high-quality steel side walls, 400 mm high; Side walls foldable and removable; Rear flap foldable, removable, and swinging with central locking; Front wall made of steel, removable; Side walls primed and painted according to RAL (colour of your choice); +++ Without loading ramps => Optional at a surcharge of €1,590 net plus VAT 1 pair aluminium loading ramps incl. support feet at rear Guodjwk Efmjpfx Apbob Length x width approx. 3,050 x 400 mm Load capacity approx. 4,390 kg/pair for a wheelbase of 1,500 mm Weight/piece: approx. 31 kg Ramp angle: approx. 16° +++ +++ Side walls, loading bed, and chassis frame hot-dip galvanised by immersion bath (side walls hot-dip galvanised / not painted!) +++ -- All information subject to change -- Illustrations may differ --

Stanje: novo, lastna masa: 560 kg, največja dovoljena obremenitev: 2.140 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.140 mm, višina nakladalnega prostora: 50 mm, prostornina tovornega prostora: 0,8 m³, barva: drugo, gradbena višina: 630 mm, delovna širina: 2.190 mm, Manufacturer: Humbaur Model: Car Transport Trailer FTK 274022 Perm. total weight: 2,700 kg Payload: 2,140 kg Unladen weight: 560 kg Bed dimensions: 4,000 x 2,140 x 50 mm Tyres: 10 inch Loading height: 610 mm Loading angle: 10° - Bolted and hot-dip galvanized chassis - Galvanized tipping platform - Tipping platform mechanically tiltable via shock absorber - Steel loading ramps - V-drawbar hot-dip galvanized in immersion bath - 13-pin connector and reversing lights - Support wheel Optional winch with winch mount €440 Price includes vehicle registration certificate (Part II and COC documents) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide free temporary registration plates. We repair trailers from all brands. Additional accessories available on request. Technical data, prices, and errors subject to change. No liability for mistakes or typographical errors. Features: auto-reverse brake, rubber suspension axle, loading ramp, tiltable load area, support wheel, marker lights, galvanized tipping platform, braked, incl. warranty, bolted and galvanized chassis, tipping platform mechanically tiltable via shock absorber, steel loading ramps, V-drawbar hot-dip galvanized in immersion bath, 13-pin connector and reversing lights. Godpfx Ajvtf Nxspbsub

Stanje: novo, lastna masa: 870 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load platform hydraulically tip-able with hand pump and electric pump Tipping angle rear 42°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made from one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight also with electric pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear panel pendulum-type - 6 lashing rings mounted on bed, 800 kg tensile force each, Dekra certified - Jockey wheel - Stake pocket prepared for retrofitting aluminium ramps Price includes vehicle registration document (Part II and COC papers) Godpfx Apjrq Ew Tebsub We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we offer a free temporary registration plate. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or typographical mistakes. Features: auto-reverse braking, rubber suspension axle, independent wheel suspension, tipper platform, jockey wheel, marker lights, hot-dip galvanized chassis and tipper body, braked, includes warranty, V-drawbar hot-dip galvanized, one-piece steel tipper body, 4-stage hard-chromed tipper cylinder, hand pump, electric pump from 3,000 kg permissible gross weight, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, pendulum-type rear panel, 6 lashing rings on bed (800 kg tensile force each, Dekra certified), ramp pocket for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. Guedpfx Aeflw Sbspbsb We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, lastna masa: 1.140 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Gross Vehicle Weight: 3,500 kg Axles: Tridem Payload: 2,360 kg Unladen Weight: 1,140 kg Body Dimension: 4,100 x 2,100 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear 45°, side 45° Gjded T Svtspfx Apboub - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made from single-piece steel - 4-stage hard-chrome-plated tipping cylinder - Hand pump, from 3,000 kg gross weight with additional electric pump - 13-pin plug and reverse lights - Drop sides made of aluminium, 350 mm high, fully removable - Rear flap is swing-type - Eight lashing rings fitted on the platform, each with 800 kg load capacity, Dekra-tested - Jockey wheel - Ramp tray prepped for easy retrofit of aluminium ramps Price includes vehicle registration document (part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request we can provide a free transfer number plate. We repair trailers from all manufacturers. Additional accessories on request. Subject to technical modifications, price changes, and errors. No liability for typing or printing errors. Reverse automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar, hot-dip galvanized, tipper platform made from single-piece steel, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm, fully removable, swing-type rear flap, 8 lashing rings on the platform, 800 kg per lashing ring, Dekra tested, ramp tray prepped for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Guodpfxeri Tawe Apbjb Model: HTK Alu 3500.41 3-Way Tipper Gross Vehicle Weight: 3,500 kg Payload: 2,315 kg Unladen Weight: 1,185 kg Bed Dimensions: 4,100 x 2,100 x 350 mm Tyres: 13-inch Loading Height: 760 mm Load bed hydraulically tiltable with hand pump and electric pump Tipping angle: rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized via immersion bath - One-piece steel tipper platform - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with additional electric pump - 13-pin connector and reversing lights - 350 mm high aluminium drop sides, fully removable - Rear flap can swing - 8 lashing rings mounted on the platform floor, each with a pulling force of 800 kg, Dekra-tested - Jockey wheel - Plank box pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration document (registration certificate part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer plates. We repair trailers of all manufacturers. Additional accessories available on request. Technical and price changes as well as errors excepted. No liability for errors or misprints. Features: auto-reverse braking system, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar fully hot-dip galvanized, one-piece steel tipper platform, 4-stage hard-chromed tipping cylinder, hand pump, additional electric pump from 3,000 kg GVW, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, rear swing flap, 8 lashing rings mounted on the platform floor, pulling force 800 kg per ring, Dekra-certified, plank box pre-installed for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf mesh extension/steel mesh extension 600 mm high, swinging on all 4 sides - V-drawbar hot-dip galvanised - Chassis and tipping platform hot-dip galvanised by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; electric pump with hand pump from 3,000 kg gross weight Gjdpfx Ajrazlkepbeub - 13-pin connector and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear gate, pendulum mounted - 6 lashing rings fitted on platform floor, each ring tested by Dekra for a load capacity of 800 kg - Jockey wheel - Channel for ramps, pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a complimentary transit/temporary licence plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability assumed for errors or misprints. Automatic reversing mechanism, rubber spring axle, independent wheel suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanised by immersion, braked, includes warranty, V-drawbar hot-dip galvanised by immersion, one-piece steel construction tipping platform, 4-stage hard-chromed tipping cylinder, hand pump, electric pump with hand pump from 3,000 kg gross weight, 13-pin connector and reversing light, aluminium side panels 350 mm high, fully removable, rear gate pendulum mounted, 6 lashing rings on the platform floor (Dekra certified, 800 kg per ring), ramp channel pre-installed for easy retrofitting with aluminium ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 1.335 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.220 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2000.27 Permissible Total Weight: 2,000 kg Payload: 1,335 kg Unladen Weight: 665 kg Body Dimensions: 2,670 x 1,500 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load Area hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg total weight, electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made from powder-coated, galvanized sheet steel, fully removable - Rear flap with swing function - 6 tie-down rings mounted on bed floor, load capacity 800 kg per ring, DEKRA certified - Jockey wheel - Channel as preparation for aluminium ramps for easy retrofitting Gusdpfxogi Sr So Apbob Price includes vehicle registration document (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transit license plate. We repair trailers of all makes. Additional accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Reverse-automatic, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, galvanized steel sheet, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized by immersion, tipping bridge made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg total weight electric pump with hand pump, 13-pin connector and reversing lights, powder-coated, fully removable drop sides, rear flap with swing function, 6 tie-down rings mounted on the bed floor, load capacity 800 kg per ring, DEKRA certified, ramp channel prepared for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Guedpfxovtf I Uj Apbeb Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.210 mm, delovna širina: 2.003 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 3500.37 Permissible gross weight: 3,500 kg Payload: 2,500 kg Unladen weight: 1,000 kg Load bed dimensions: 3,630 x 1,850 x 350 mm Tyres: 13 inch Loading height: 740 mm Load platform hydraulically tipppable with manual pump and electric pump Tipping angle rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platforms, fully hot-dip galvanized - One-piece steel tipping platform - 4-stage hard chrome tipping cylinder Guederq Exbopfx Apbeb - Manual pump, and from 3,000 kg permissible gross weight onwards, electric pump with manual pump - 13-pin plug and reversing lights - Aluminium side boards, 350 mm high, fully removable - Swinging rear gate - 8 lashing rings on the bed, pull force 800 kg per ring, Dekra-certified - Support wheel - Plank compartment prepared for aluminium planks for easy retrofitting Price includes vehicle registration certificate (Certificate of Registration Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary license plate. We repair trailers of all makes. Further accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Features: automatic reverse, rubber suspension axle, independent suspension, tilting load platform, support wheel, position lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard chrome tipping cylinder, manual pump, from 3,000 kg permissible gross weight electric pump with manual pump, 13-pin plug and reversing lights, aluminium sidewalls 350 mm high, fully removable, swing rear gate, 8 lashing rings on the load bed, pulling force 800 kg per ring, Dekra certified, plank compartment prepped for easy retrofitting of aluminium planks.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3500 kg Payload: 2512 kg Unladen Weight: 988 kg Body Dimensions: 3140 x 1750 x 350 mm Tyres: 195 50 R13C Loading Height: 740 mm Load Platform hydraulically tiltable via hand pump and electric pump Tipping Angle: rear 42°, lateral 50° With 600 mm high steel side extension panels, pendulum-mounted on all four sides - V-drawbar, hot-dip galvanized immersion - Chassis and tipper frame hot-dip galvanized immersion Gusdpfxjfbiavs Apbob - Tipper body made from steel, single-piece construction - 4-stage hard-chromed tipping cylinder - Hand pump, electric pump from 3000 kg GVW up, combined with hand pump - 13-pin connector and reversing lights - Removable aluminium side walls, 350 mm high, completely detachable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra certified - Support wheel - Plank compartment pre-installed for easy retrofitting with aluminium planks Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors. Reversing automatic, rubber-sprung axle, independent suspension, tiltable load platform, support wheel, clearance lights, chassis and tipper frame hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipper body single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg GVW up electric pump with hand pump, 13-pin plug and reversing lights, removable aluminium sidewalls 350 mm high, rear tailgate pendulum-mounted, 6 lashing rings mounted on the platform floor, tensile strength 800 kg per ring, Dekra certified, plank compartment as preparation for easy retrofitting with aluminium planks.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel Guedpfoktm Susx Apbeb - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Box Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle: rear 42°, side 50° Key Features: - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight with electric pump and hand pump - 13-pin plug and reversing lights - Side walls made from 350 mm high aluminium, completely removable - Rear tailgate can swing - 6 lashing rings mounted on the platform floor, each with 800 kg pull force, Dekra certified - Support wheel - Channel prepared for easy retrofit of aluminium loading ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary license plate. We repair trailers from all manufacturers. Additional accessories available on request. Gusdpfxjrazk Uo Apbjb Technical changes, price adjustments, and errors excepted. No liability for errors or misprints. Features: Reverse automatic brake, rubber suspension axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipper platform hot-dip galvanised, braked, including warranty, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium drop sides, completely removable, swinging rear gate, 6 lashing rings on floor (800 kg pull each, Dekra tested), ramp channel for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.251 mm, delovna širina: 2.022 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.37 Permissible Gross Weight: 3000 kg Payload: 2100 kg Unladen Weight: 900 kg Body Dimensions: 3630 x 1850 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable via manual pump and electric pump Tipping angle rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platform fully hot-dip galvanized Gedpfxjl Dqlds Apbeub - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Manual pump; from 3000 kg gross weight onwards: electric pump with manual backup - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear tailgate can be used as a swinging gate - 8 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra tested - Jockey wheel - Preparation for aluminum ramps (ramp compartment) for easy retrofitting Price includes registration documents (Certificate of Title Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: auto-reverse brakes, rubber suspension axle, independent suspension, tiltable loading platform, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, manual pump, from 3000 kg gross weight electric pump with manual backup, 13-pin plug and reversing lights, aluminum side walls 350 mm high, fully removable, rear swinging tailgate, 8 lashing rings mounted to the platform with 800 kg tensile load per ring, Dekra approved, ramp compartment as preparation for retrofitting aluminum ramps.

Stanje: novo, lastna masa: 4.000 kg, največja dovoljena obremenitev: 15.000 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 800 mm, prostornina tovornega prostora: 10 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5 zoll, Leto izdelave: 2024, Oprema: ABS, HUMBAUR TANDEM THREE-WAY TIPPER "BULK MATERIAL/GRAVEL TIPPER" TYPE: HTK 195024 "Gravel Tipper" => Permissible total weight: 19,000 kg => Payload: approx. 15,000 kg => Curb weight: only approx. 4 tonnes => HOT-DIP GALVANIZED CHASSIS FRAME - Side walls made of HARDOX HB 450, foldable (spring-assisted lifting optional at extra charge; see below) - Rear wall made of HARDOX HB - Front wall made of fine-grain steel - Central three-side locking - Automatic rear wall release - Electronic air suspension - SAF axles, reinforced CD version, drum brakes - Unladen weight only approx. 4,000 kg - Chassis frame hot-dip galvanized by immersion bath - Side walls KTL + powder-coated in white - KNORR braking system - Drawbar head with “roof shape” - Folding underride guard - Body length: approx. 5,010 mm - Internal width: approx. 2,410 mm (pallet width) - Side wall height: approx. 800 mm (steel) - Ø 50 mm DIN towing eye - 15-pin 24V electrical connector (lighting) - 7-pin EBS connector - SVK-BG3 hydraulic quick-coupler - Compressed air couplings: RED/YELLOW OPTIONALLY AVAILABLE AT EXTRA COST: • Side wall spring-lifting per side = €890 net plus VAT Godpoiciupsfx Apboub => Delivery freight: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and change!* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general orientation only—may show equipment available at extra charge*

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2024, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 r 17,5, barva: srebrn, Leto izdelave: 2023, Oprema: ABS, nalagalnik, Three-way Tipper HTK Gala 105024 for Rent! Description 1 day: €150 3 days: €420 1 week: €760 1 month: €2,350 Gjdon Amrvepfx Apbjub HUMBAUR THREE-WAY TIPPER NEW MODEL 2019 (HTK THROUGH-LOADER / SMB AXLES) => INCLUDING THROUGH-LOADER DESIGN => AUTOMATIC REAR PANEL LOCK RELEASE => Chassis frame HOT-DIP GALVANIZED => Bridge frame HOT-DIP GALVANIZED => Side panels HOT-DIP GALVANIZED Equipment: Permissible total weight: 11,900 kg Payload: approx. 9,200 kg Support load: 500 kg Loading area approx. 5,020 x 2,420 mm Steel side panels approx. 450 mm high Side panel lifting springs (lateral panels) Drawbar FIXED mounted, non-adjustable Reinforced 25 t gearbox support winch (static) with load & fast mode 8 flush-mounted 3 t lashing rings in the loading floor 2 foldable and telescopic supports at the rear (hot-dip galvanized) 2-circuit ABS air brake system Central locking on the side and rear Plastic mudguards with anti-spray protection system Tyres: 4 x 235/75 R17.5 inch 15-pin 24-volt electrical connector for the 24-volt lighting 7-pin 24-volt ABS connector Compressed air connections RED and YELLOW Ø 40 mm DIN towing eye Coupling height approx. 800 mm Hydraulic connection: SVK BG plug Optional extras at additional cost: Stronger brake cylinders and control valves as well as EBS • 2 aluminum drive-on ramps with 8 t load capacity per pair, including ramp storage compartment • Additional cost: net €2,250 plus VAT • 1 plastic toolbox • Additional cost: net €290 plus VAT Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU

Stanje: novo, lastna masa: 10.400 kg, največja dovoljena obremenitev: 4.000 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6,1 m³, vzmetenje: jeklo, velikost pnevmatike: 285/70/19,5, medosna razdalja: 1.260 mm, barva: drugo, Leto izdelave: 2023, Oprema: ABS, SAF axles Maintenance-free parabolic suspension with load equalization ABS braking system according to ECE regulations with ALB function ABS plug connection ISO 7638 Spindle-type parking brake 24 Volt lighting system with multi-chamber rear lights and LED side marker lights 15-pin connector plug Fixed drawbar Reinforced 12 ton gearbox support winch with load and fast operation Hydraulic three-way tipping system controlled via towing vehicle Hydraulic quick-release coupling SVK BG3 as single-circuit connection Platform floor made from 4 mm fine-grain steel 4 ball-type tipping bearings with 2 interchangeable tipping bolts Steel side walls, 500 mm high Side and rear walls fold-down and removable, also swinging with central locking Optional extras if required: Ramps with 10 t load capacity per pair: €1,950 + VAT Side underrun protection: €365 + 19% VAT Godpjggikxsfx Apbsub etc. If you require additional accessories, please simply call us at the number below. All prices ex works.

Stanje: novo, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 7,3 m³, vzmetenje: zrak, velikost pnevmatike: 435/50 r19,5 zoll, Leto izdelave: 2023, Oprema: ABS, HUMBAUR TANDEM THREE-WAY TIPPER (HTK UNIVERSAL) With AIR SUSPENSION!!! Chassis frame HOT-DIP GALVANIZED Platform frame HOT-DIP GALVANIZED Side panels HOT-DIP GALVANIZED Equipment: Permissible total weight: 18,000 kg Payload: approx. 13,700 kg Support load: 1,000 kg Loading platform approx. 5040 x 2420 mm Steel side panels approx. 600 mm high Side panel lifting springs for the side walls Fixed drawbar Reinforced 25t (static) gearbox support winch with load and fast gear 5 pairs of 6 t lashing rings recessed in the platform floor 2 foldable and telescopic support legs at the rear of the vehicle (hot-dip galvanized) 2-circuit ABS air brake system Integrated compartment for 2 aluminium loading ramps in the chassis frame Central locking system on sides and rear Plastic mudguards with anti-spray system 4 SPHERICAL TIPPING BEARINGS WIDE tyres, 4 x 435/50 R19.5 inch 15-pin 24 Volt electrical connector for 24 Volt lighting 7-pin 24 Volt ABS connector Compressed air connections RED/YELLOW Ø 50 mm DIN towing eye Coupling height approx. 790 - 1050 mm Guedpfx Aoiciudepbsb Hydraulic connection: SVK BG3 plug We optionally offer at extra charge: • 2 aluminium loading ramps, approx. 3570 x 400 mm, load capacity per pair 10,000 kg • Surcharge: net €2,650 plus VAT • 1x plastic toolbox mounted under the loading platform • Surcharge: net €330 plus VAT • Grilles over the rear lights • Surcharge: net €190 plus VAT => Freight costs for delivery: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general guidance only => may include/show optional equipment at extra charge*

Stanje: rabljeno, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 3.626 mm, skupna širina: 2.022 mm, skupna višina: 1.240 mm, Errors and prior sale excepted! Guodpfx Apspxmg Nsbeb Internal Number: 1451. GW220985927 ---- For equipment details and condition, please refer to the images. ---- The vehicle is offered in as-is condition! Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to accept your vehicle as a trade-in. Financing / leasing available with no down payment required! Do you have any questions? We are happy to advise you!

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, Oprema: ABS, * Drum brakes Guedpfx Aswdcghjpbsb * Storage compartment for ramps * Ramp load capacity per pair: 10,000 kg on request, price €1,900 net * Frame and side panels fully hot-dip galvanized * Rear wall with automatic tailgate release * Steel front wall foldable forward * 10 recessed lashing rings on the loading platform * Loading height approx. 1,060 mm * Height-adjustable drawbar * Side panels spring-assisted * Suspension: leaf springs * Payload: 10,900 kg * Tyres: 285/70R19.5 ---Information subject to change – errors excepted – subject to prior sale.

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, Oprema: ABS, * Drum brakes * Storage compartment for ramps * Aluminium ramps, load capacity per pair: 8,000 kg available on request, price: €1,800 net * Frame fully hot-dip galvanized * 10 lashing rings on the loading area * Loading height approx. 990 mm * Height-adjustable drawbar * Side walls with spring assistance * Trailer immediately available * Suspension: leaf springs Guodpfx Apjwdcg Isbsb * Payload: 8,750 kg * Tyres: 235/75R17.5 ----Specifications subject to change – errors excepted – prior sale reserved