Fliegl Schubboden 92 M³ Sds 390 nakup rabljenega (45.456)

Stanje: rabljeno, lastna masa: 7.600 kg, največja dovoljena obremenitev: 28.400 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2007, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 2.800 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, MB axles with disc brakes, air suspension, raising and lowering, ABS (anti-lock braking system), sliding tarp, portal doors, underrun protection, side aluminum impact guard, support legs, special floor for self-unloading. Rcedpfx Apsummufshef Body: 3-axle walking floor semi-trailer with sliding tarp, approx. 92 m³ capacity. The moving floor is approx. 34 mm thick, sliding end piece 6–12 mm. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801013475, lastna masa: 7.180 kg, največja dovoljena obremenitev: 28.820 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Available in multiple units. Fine-grain steel welded construction, saddle plate with replaceable 2" kingpin, additional splash guard made from sheet metal riveted to the underside floor, in the gooseneck area above the rear axle of the tractor unit as well as above the wheels on the vehicle. Reinforced frame version for vehicle loads up to the outer frame. Outer frame equipped with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushrooms recessed into the outer frame, each rated at 10 tons, 24 ton 2-speed landing gear, single-sided operation, with semi-rounded lower section and straight connection plate, featuring load compensation, foldable rear support, wheel chocks with holder, aluminum side underrun protection, steel underrun protection, quarter-fender mudguards in front of and behind each axle, with additional sheet splash guards over the wheels, fitted with anti-spray mud flaps according to EC standards, 1 plastic toolbox (600 x 425 x 460 mm), lockable. Container locks: 4 pairs of locking recesses embedded in the floor for 2 x 20-foot or 1 x 40-foot container, 4 pairs of container locking adapters (additional cross supports at the front and rear of the container required; the container must be evenly supported across the width; cross supports not included). Ramp attachment bar at rear extension across full width, mechanical rear extension with hand crank extendable by approx. 1,500 mm, lockable every 500 mm, includes extendable underrun protection with lighting. Lane area fitted with Lohr perforated sheet, central area with steel checker plate, storage space for drive-on ramps integrated in rear extension—usable only when rear extension is extended by approximately 1000 mm. For ramp transport with retracted rear extension, ramp storage is located on the right in front of the axles. One pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg. Electric cable winch, 24 volts, pulling force approx. 8,165 kg, centrally mounted at the very front, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers. Axles & Suspension: SAF or BPW drum-braked axles as selected by the manufacturer, air suspension, first axle with automatic lift axle, additionally electrically operable from the truck, including forced lowering and drive assist. Rjdpjza Aiyefx Aphecf Brake system: 2-line compressed air brake system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS (electronic braking system) with EBS socket at the front (no connection cable provided), with raise & lower valve and fast venting, hold function in lowered position + auto-reset function, vehicle stability system, axle load detection via EBS CAN bus signal. Wheels & Tires: 235 / 75 R 17.5" — brand per manufacturer's choice, twin-mounted steel rims. Electrics: 24 volts, LED multi-chamber lights, side yellow LED lighting, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, operated via parking light, 2 pairs of double LED-illuminated warning panels extendable to 3,000 mm, 1 additional 7-pin socket (ISO 1724) in the rear underrun protection, 2 side LED work lights (1 each on front left and right). Floor: Lohr perforated stee

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.500 kg, največja dovoljena obremenitev: 33.500 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailor-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized individually according to customer specifications. Chassis Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container mounts: - 1 x 20 ft container centered without steel/chequer plate floor at the rear section - 2 x 20 ft or 1 x 40 ft with gooseneck tunnel - Without rear height adjustment and without foldable central supports; transportation of containers without tunnel is not possible. 24 t two-speed landing gear, single-side operation, with straight base, without push compensation 2 wheel chocks with holders Side underrun protection in aluminum Rear underrun protection in galvanized steel Half-shell mudguards with anti-spray mudflaps according to EU regulations Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axle spacing offset mm (for intermodal transport) up to 44 t gross combined weight Air suspension Rjdpfx Apei Riv Nohjcf Brake System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without interconnection line EBS electronic braking system with EBS socket at the front, without connecting cable Please note: The trailer must only be towed by towing vehicles that ensure proper ABS functionality! With lift & lower valve Vehicle Stability System Axle load detection via EBS CAN bus signal, for display in the driver’s cab (truck must be pre-equipped accordingly, no truck installation/no certified scale provided) Wheels and Tyres 385/55 R22.5, make according to manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, rear and brake lights in LED, lateral yellow LED lighting (Note: With certain towing vehicles, false diagnostics may occur, even though functionality is ensured) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin, non-interchangeable sockets at the front, without interconnecting cable 2 additional LED work lights at the rear, operated via reverse gear Operating Instructions Note: Transport of filled tank containers is excluded! Country of Registration / Signs Germany with Dekra inspection and report (according to §13 EG - FGV) prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame painted DB 7350 nova grey – 10-year corrosion warranty or hot-dip galvanized – 15-year corrosion warranty Tailor-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized individually according to customer specifications.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902032084, lastna masa: 4.140 kg, največja dovoljena obremenitev: 33.860 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.240 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: bela, Attention: The images shown are archive photos; the vehicle may still be in use! Aluminium Wheels Alcoa Dura-Bright Air Suspension 1st axle with automatic lift axle function, including forced lowering and start-assist feature, activated via '3x braking.' (Start assist is functional up to an axle overload of 30% and up to a speed of max. 25 km/h) 'Hot-dip galvanized lift axle mechanism' with 10-year corrosion-through warranty Electrics 24 Volt, Multi-chamber tail lights, lateral yellow LED side marker lights 2 white front position lights 2 white/red lane position marker lights at the rear 1 x 15-pin socket at the front, without connection cable 2 additional LED worklights integrated into the rear, switched via the reversing lights Hydraulics High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Taken from the specified vehicle Hydraulic actuation via truck PTO Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut Tipping Body Aluminium box body made of high-grade, abrasion-resistant material. Sloped front wall 5 mm thick, with external cylinder mount. Sidewalls made from 30 mm hollow-chamber profiles, neatly welded, with spill-reducing upper rail profile. Interior access ladder on front wall (not with Cramaro tarpaulin system). External shovel and broom brackets on front wall. Greenline – conical and aerodynamic body design "Membrane" rear wall Rcsdpfx Apjwhfiyjhof Rear wall designed as a pendulum tailgate with double-jointed hinge, externally mounted, with double hook locking system. Rear wall with rubber seal – note: heat resistant up to max. 170°C! Floor throughout 6 mm thick. Standing platform with access ladder, bracket plate for air/electrics and brakes with generous clearance for optimum operability. Roll tarpaulin can be parked on passenger side (FR-right), with central locking on driver side (FR-left).

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.070 kg, največja dovoljena obremenitev: 33.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 990 mm, skupna dolžina: 13.990 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Rodsi Ri R Sjpfx Aphocf Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized individually to customer specifications. Chassis: Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot container flush with rear Center telescopic 1st stage, rear extension extended 1st stage: 2 x 20-foot or 1 x 40-foot with or without gooseneck tunnel Center telescopic 2nd stage, rear extension extended 2nd stage: 1 x 45-foot with gooseneck tunnel and overhanging to the rear Center telescopic 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45-foot with long gooseneck tunnel and chamfered corners Center telescopic as interlocking central tube frame with bolt locking With rear height adjustment and foldable intermediate supports for containers without tunnels Container guide at the front, plug-in and detachable Plug adapter for front locking, for securing containers without tunnel from below, with holder for when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t, 2-speed landing gear, single-sided operation Extendable underrun protection for 45-foot container Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser measured to reduce tire wear and fuel consumption Staggered axle spacing mm (intermodal operation) up to 44 t gross combination weight Air suspension 1st axle with automatic lift axle, including forced lowering and start-up aid, activated by braking 3 times (start-up aid functional up to 30% axle overload and a maximum speed of 25 km/h) Brake System 2-line compressed air brake system, color-coded pipeline layout for easy service. Spring-actuated parking brake Tele Control Axle relief for easy telescoping 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connecting cable Important: The trailer may only be towed by tractors that ensure effective ABS! With raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, display in the driver’s cab (truck must be pre-equipped accordingly, no truck installation; not a certified scale) Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, rear and brake light in LED, side yellow LED lighting (Note! With certain towing vehicles, malfunction indications may occur despite correct operation) 2 white position lamps at front 2 white/red lane marker lamps at rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Operating Notes When transporting 45-foot containers with a short tunnel, with or without front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16,500 mm is exceeded! The underrun protection must be manually extended! An exemption approval according to § 70 StVZo is required! Country of Registration / Plates Germany Approval according to EC 2007/46 24/7 Service Hotline Tailored Transport Solution

Stanje: rabljeno, največja dovoljena obremenitev: 28.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Knapen K100 Pomikajoče dno 92m³ Rcjdpjyxzf Sofx Aphof * Dno v vrhunskem stanju * BPW osi z zračno vzmetenjem in kolutnimi zavorami * 1. os dvižna * Plastična škatla za orodje * Pnevmatske gume 385/65 R22,5 * Jost podporne noge * Wabco krmilna plošča zračne vzmetenja * Delovne luči * Strešna rolo ponjava * Delovni oder z dostopom * Premična pregrada * Nosilec za metlo in lopato Za več informacij smo vam na voljo

Stanje: rabljeno, lastna masa: 7.840 kg, največja dovoljena obremenitev: 28.160 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2015, prostornina tovornega prostora: 92 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, Oprema: ABS, | STAS premikajoče se dno | Tip S300ZX, funkcija | Orodjarna | Dvigalna os | Zračno vzmetenje | Nosilec rezervnega kolesa | Prazna masa 7.840 kg, nosilnost 28.160 kg | Pnevmatike: 385/65 R22.5 | Os SAF z diskovo zavoro | Veljavno poročilo o pregledu do 04/2026 | 10 mm debelina dna | Pridržana pravica do sprememb, napak in predčasne prodaje. Rcsdpfx Apszr R A Rehsf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802037879, lastna masa: 3.250 kg, največja dovoljena obremenitev: 34.750 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 6.790 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, multiple units available Chassis semitrailer for containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Container mountings: 1 x 20-foot, flush with rear Rcjdpfxezbtnio Aphjf (Note! Reduced saddle load when carrying 20-foot containers) 24t, 2-speed landing gear, single-sided operation, with semicircular lower part and straight connection plate, with compensating slide 2 wheel chocks with holders Steel underrun protection Full-width rear mud flap Half-shell mudguards with anti-spray mudflaps in accordance with EC regulations Storage box for fire extinguisher up to 6 kg Fire extinguisher (ABC powder, 6 kg) Including stainless steel drip plate, centrally positioned on the rear container crossmember, approx. 290 mm wide Axles and suspension BPW disc brake axles, with 430 mm disc diameter "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport), up to 44t gross combination weight Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, actuated by "3x brake" (starting aid works up to 30% axle load exceedance and speeds up to max. 25 km/h) Braking system 2-line compressed air brake system Colour-coded piping for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24V EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure ABS functionality! with lift & lower valve Vehicle stability system Axle load detection via EBS-CAN bus signal, display interface in cab (truck must be correspondingly pre-equipped, not installed in truck, not a calibrated scale) Wheels and tyres 385/55 R22.5" tyres, brand as per manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white LED position lights front 2 white/red lane marker lights rear 1 x 15-pin socket front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the cargo, it may not be achievable within the permissible axle, support or fifth-wheel loads. (Poor driving and tracking stability possible due to incorrect load distribution) Country of registration / plates Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline prepared for single-line number plate holder "A" warning sign for waste transport, foldable ADR approval for FL/AT with ADR warning sign at rear Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: RAL 2011 deep orange "10-year corrosion warranty" Support legs: coated black multiple units available

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.816 kg, največja dovoljena obremenitev: 33.184 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 11.250 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually customized to customer specifications. Chassis Semi-Trailer Container Fine-grain steel welded construction, fifth wheel plate with exchangeable kingpin and two kingpin positions Container mounts: included Rear extension retracted: Rsdezlkiwopfx Aphecf 1 x 20 ft flush with the rear, note: low fifth wheel load Rear extension extended 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang without height adjustment at the rear and without folding center supports, transportation of containers without a tunnel is not possible. Plug adapter for front locking, for locking containers without tunnel from underneath, with bracket for storage when not in use Rear extension mounted on rollers, with hand crank 24 t, two-speed landing gear, single-side operation 2 wheel chocks with holder Side underrun protection aluminum Rear underrun protection galvanized steel Extendable rear underrun protection for 45 ft containers Half-shell mudguards included with spray-suppression mud flaps according to EU standards Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle and chassis laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (intermodal transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction assistance, operation by 3x braking (traction assist functional up to axle overload of 30% and max. speed of 25 km/h) Brake System Two-line pneumatic brake system Color-coded lines for easy servicing. Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer vehicle may only be towed by tractor units that ensure the effectiveness of ABS! with lift & lower valve Vehicle stability system Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be pre-configured, no truck installation, not a calibrated scale) Wheels and Tires 385/55 R22.5 brand according to manufacturer’s choice Steel rims, factory silver Electrics 24 volt, multi-chamber lights, tail and brake lights in LED, side yellow LED lighting (Note: Certain tractor units may incorrectly diagnose faults even if functions are operational) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Operating Instructions When transporting a 45 ft container with short tunnel, with or without front extension, the permissible system length from kingpin to rear of the vehicle and the total train length of 16,500 mm is exceeded! Rear underrun protection must be extended manually! An exemption according to § 70 StVZo is required! Registration/Country Plates Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for one-line license plate holder 390 contour marking with reflective tape to ECE R 048, white on sides and red at rear Painting Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Support legs painted black

Stanje: rabljeno, lastna masa: 12.200 kg, največja dovoljena obremenitev: 26.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2024, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 80 odstotek, barva: črn, Leto izdelave: 2024, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Referenčna številka za povpraševanja: 413701 Fliegl, SDS 480 * Leto izdelave: 2024 * ABS, protiblokirni zavorni sistem * Zračno vzmetenje * Nevtralna ponjava * Rabljena ponjava * Edscha/snemljiva streha * Vpotegljive pritrdilne zanke * Mehansko dvižno streho * Sledilna krmiljena os * Zračni priključek (rdeči + rumeni) * Priključni vtič 2x7-polni Rsdpfx Apjzhfvdshjcf * Priključni vtič 15-polni * Dvižno/spuščalna naprava * Skladiščna/skrinja za orodje * Zadnja podpora * Hidravlične rampe * Vzmetenje: zračno * Skupna masa: 39.000 kg * Lastna masa: 12.200 kg * Nosilnost: 26.800 kg * Dovoljena skupna masa: 39.000 kg * Proizvajalec osi: SAF * Stanje pnevmatik 1. os: 80% -- 80% - Dimenzija pnevmatik: 235/75 R17,5 * Stanje pnevmatik 2. os: 80% -- 80% - Dimenzija pnevmatik: 235/75 R17,5 * Stanje pnevmatik 3. os: 80% -- 80% - Dimenzija pnevmatik: 235/75 R17,5 * Dimenzije pnevmatik: 235/75 R17,5 * Hidravlična 26 t nakladalna rampa * Daljinsko upravljanje za nakladalno rampo * Krmiljena sledilna os * Višina sedla: 1250 mm * Notranja višina nižjega ležišča: 3050 mm * Nakladalna višina nižjega ležišča: 920 mm * Zadnje razširitve stranic po 400 mm * Sedlena plošča z izmenljivim kingpinom * 30 mm Omega tla * 24t podpora * Prepoznava osnih obremenitev v tovornjaku * Nadzor tlaka v pnevmatikah * Izvlečne opozorilne table * 10-letna garancija proti rjavenju * Na željo pošljemo video * Dodatne slike in opis konstrukcije Izključitev odgovornosti: Pridržujemo si pravico do sprememb, vmesne prodaje ali napak. Več slik in videoposnetkov najdete na naši spletni strani. Naša obsežna storitev zajema npr.: * Odkup/prodaja/najem gospodarskih vozil * Hitro in enostavno financiranje * Urejanje vseh (izvoznih) dokumentov * Naročilo izvoznih/tablic za carino * Priprava vozila: nove ponjave, napisi, barvanje, itd. * Profesionalno nakladanje/pritrjevanje tovora * TüV pregledi, registracijska storitev * Prevoz gospodarskih vozil Za vsa vprašanja se obrnite na naše usposobljeno strokovno osebje, z veseljem vam svetujemo.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.810 kg, največja dovoljena obremenitev: 34.190 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailor-made Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to the customer’s specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with interchangeable double king pin Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is excluded. Without height adjustment at the rear and without folding center supports, transport of containers without tunnel is not possible. Removable container guide at the front 24 t, 2-speed landing gear, single-sided operation, straight base, without compensating bearing Wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Half-shell mudguards With anti-spray mudflaps according to EC regulations Rear impact guard Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned – reduces tire wear and fuel consumption Axle spacing offset mm (suitable for combined transport) for up to 44 t gross train weight Air suspension 1st axle: automatic lift axle including forced lowering and starting aid; activated by braking three times (starting aid operational up to 30% axle overload and up to max. 25 km/h) Brake System 2-line compressed air brake system, color-coded lines for easy servicing. Rcedpfjzlkgcox Aphjf Spring-loaded parking brake 2 confusion-proof coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: This trailer may only be towed by tractors that guarantee ABS functionality! Raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab (truck must be pre-equipped, not included) Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, LED rear and brake lights, yellow side LED lighting 2 white front position lamps 2 white/red lane marker lights at rear 1 x 15-pin socket at the front, without connection cable Side-mounted LED work lights on both sides (activated via reversing light) Additional LED work light(s) at the rear, activated via reversing light Operating Notes The specified gross weight is technically possible; depending on the cargo, the gross weight may not be achievable when adhering to the permitted axle, support, and fifth wheel loads. Special permit required if total train length exceeds 16,500 mm Attention: Transport of filled tank containers is excluded! Registration Country / Signs Germany With Dekra certification and report (per §13 EC-FGV) Prepared for single-row license plate holder Warning panel per ECE-70 Contour marking with reflective tapes per ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Nova grey *10 years warranty against rust-through* or hot-dip galvanized *15 years warranty against rust-through* Support legs coated in black Tailor-made Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to the customer’s specifications.

Stanje: rabljeno, največja dovoljena obremenitev: 27.520 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2020, naslednji pregled (TÜV): 04/2027, skupna dolžina: 14.040 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, žerjav, Knapen K100, nakladalni prikolica z drsečim dnom, 92 m³, dno HDI * 8/18 mm profil HDI, odporna različica * Aluminijasta platišča * Pnevmatike 385/65R22,5 * 1. osica kot dvižna osica * Delovna platforma z lestvijo * Strešna ponjava * Predal za orodje * Delovna luč * Stranska zaščitna ponjava Rcedpfx Apszu Dw Tehof Za dodatne informacije smo vam z veseljem na voljo.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, prostornina tovornega prostora: 92 m³, Oprema: ABS, Standard model, suitable for transporting dry bulk materials and palletized loads. - Chassis made of STEEL, preconfigured for Cargo Floor - 1st axle as lift axle - 3 SAF rigid axles, 9 tons each, with disc brakes Ø 430 mm - Air suspension with manual lifting/lowering valve - Support legs with universal foot (flat plate + half wheel) - EBS WABCO braking system 2s/2c - A.D.R. electrical system - Pneumatic parking brake - Wheel chocks and holders - Lateral safety guards - 6 PVC mudguards - 2 PVC toolboxes Internal dimensions: Length: 13,542 mm – Front height: 2,660 mm – Rear height: 2,814 mm – Width: 2,475 mm – Capacity: 92 m³ External dimensions: Length: 13,665 mm – Width: 2,542 mm – Height above ground: 4,000 mm – Fifth wheel height: 1,150 mm – Gross vehicle weight: 39,000 kg Moving Floor: CF500 Cargo Floor (moving floor) with 21 aluminum slats, thickness 10 mm, standard (smooth, longitudinally ribbed) - Rear floor section (300 mm) of stainless steel, approx. 4 mm thick - Remote control in a waterproof control box - Max. pressure valve (225 bar) and high-pressure oil filter - Board movement: 200 mm/cycle Subframe: - Made entirely from extruded aluminum profiles (cross members) - Moving floor supported longitudinally by aluminum tubes - Corrosion protection via polypropylene films between aluminum and steel Front wall: - Made of aluminum profiles 600/30/3/2 mm with reinforced upper profile - Front walkway with 2 ladders for accessing side tarpaulin - Connection strip (with sockets) for brake, lighting, and hydraulic systems - Upper square reinforcement plates between front and side walls Movable bulkhead: - Made of aluminum profiles and tarpaulin hem on the floor, with reinforced battens for tarpaulin attachment - Sliding partition, suspended on trollies with slide bearings on 2 rails Side wall: - Made of aluminum profiles 600/30/3/2.5 mm, inside and outside welded to contour - Upper circumferential profile with rail for movable partition Rear frame: - Made of aluminum profiles with 2 doors of aluminum profiles 600/30/3/2.5 mm, surrounding door profile 50 mm, double seal - 4 aluminum hinges with galvanized pin (vertical), upright with handle, fully bolted stainless steel lock with vertical rod for each door - Rotatable upper rear cross brace (one piece) - Safety device for door release (pneumatically actuated) Redpsypa Hbofx Aphscf Roof: - 4 removable roof bows - Vertical tarpaulin securing straps, with 4 lateral tension belts - 2 straps running the full length - Tarpaulin 900 g/m² - Mounting the right tarpaulin by rivets along the top profile Paintwork: - Chassis color: MENCI SILVER GREY - Body color: MENCI SILVER GREY - Tarpaulin color: RAL 9006 Standard equipment: - 4 safety hooks for tarpaulin - Holder for shovel, broom, and rake - Manometer for weight control (63 mm diameter) in the moving floor control box - Compressed air gun connection at rear left - Prepared for tarpaulin roller (floor tarpaulin) at rear - Rear foldable guard for taillights Optional extras: - 6 SPEEDLINE alloy wheels 385/65 R 22.5, offset 120 - RADIO REMOTE CONTROL All details without guarantee!

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2020, prostornina tovornega prostora: 92 m³, Oprema: ABS, Standard model, suitable for transporting dry bulk materials and palletized loads. - Chassis made of STEEL, pre-fitted for Cargo Floor. - 1st axle as lift axle - 3 rigid SAF axles, 9 tons each, with 430 mm disc brakes - Air suspension with manual raise/lower valve - Support legs with universal foot (flat plate + half-wheel) - EBS WABCO braking system 2S/2C - A.D.R. electrical system - Pneumatic parking brake - Wheel chocks and brackets - Side underrun protection - 6 PVC mudguards - 2 PVC toolboxes Internal dimensions: Length: 13,542 mm – Front height: 2,660 mm – Rear height: 2,814 mm – Width: 2,475 mm – Volume: 92 m³ External dimensions: Length: 13,665 mm – Width: 2,542 mm – Height above ground: 4,000 mm – Fifth-wheel height: 1,150 mm – Gross weight: 39,000 kg Moving Floor: CF500 Cargo Floor (moving floor) with 21 aluminum planks, 10 mm thick, standard type (smooth, longitudinal ribbing) - Rear floor end (300 mm) in stainless steel, approx. 4 mm thick - Remote control in a waterproof control box - Max. pressure valve (225 bar) and high-pressure oil filter - Board movement: 200 mm per cycle Subframe: - Entirely made of extruded aluminum profiles (crossbeams) - Moving floor is longitudinally supported by aluminum tubes - Corrosion protection by polypropylene sheets applied between aluminum and steel Front wall: - Made from 600/30/3/2 mm aluminum profiles with reinforced top profile - Front catwalk with 2 ladders for side curtain operation - Connector strip (with sockets) for braking/electric/hydraulic systems - Upper square reinforcement plates between front wall and side wall Mobile partition wall: - Made from aluminum profiles and curtain bead at the floor, with reinforced strips for attaching curtains - Sliding partition, suspended from trolleys with slide bearings on two rails Side wall: - Made from 600/30/3/2.5 mm aluminum profiles, welded along the contour inside and outside - Upper continuous profile with a rail for the mobile partition Rear frame: - Made from aluminum profiles, with 2 doors (600/30/3/2.5 mm aluminum profile), 50 mm all-round door profile, double sealing - 4 aluminum hinges with galvanized pins (vertical), upright with handle - Fully screwed stainless steel lock with vertical tubular bar on each door - Rotatable upper rear cross member (one-piece) - Pneumatic safety device for door unlocking Roof: - 4 removable crossbars - Curtain fastening straps vertical, with 4 side tensioning straps - 2 tension belts across the full length - Curtain 900 g/m² - Right side curtain fixed by rivets along the surrounding profile Chassis color: SILVER GREY by MENCI Rcedpsypa Dyjfx Aphof Body color: MENCI SILVER GREY Curtain color: RAL 9006 Standard accessories: - 4 safety hooks for the curtain - Holder for shovel, broom, and rake - Manometer for weight monitoring (63 mm diameter) in moving floor control box - Compressed air gun connection on the left rear side - Prepared for rear floor tarp roller - Rear foldable protection for taillights Additional special equipment: - 6 SPEEDLINE LIGHT-ALLOY RIMS 385/65 R 22.5, OFFSET 120 - RADIO REMOTE CONTROL All details subject to change without notice!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.750 kg, največja dovoljena obremenitev: 30.250 kg, skupna masa: 35.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta izvedeni individualno po želji stranke. Dodatne informacije Podvozje polpriklopnik-kipar Finozrnata jeklena varjena konstrukcija v osnovni lahki izvedbi, sedelna plošča z zamenljivim 2. kraljevim zatičem Ukvirjen sprednji zaključek, patentiran 24 t, 2-stopenjska podporna ročica, enostransko upravljanje, z ravnim spodnjim delom, brez možnosti uravnoteženja poteka Zložljiva zaščita proti podletu Polovična blatniška krila Vlečna kljuka na zadnji strani Premi in vzmetenje SAF preme s kolutnimi zavorami, premer diska 430 mm Laser merjeno podvozje/premi za zmanjšanje obrabe pnevmatik in porabe goriva Premi v Offroad izvedbi Zračno vzmetenje 1. prema avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju Pocinkan mehanizem dvižne osi, 10 let garancije proti prerjavenju Zavorni sistem Dvovodni tlačni zavorni sistem; barvno označene cevi za enostavno servisiranje. Vzmetno-zaporni parkirni zavorni sistem 2 varno zamenljivi priključki spredaj, brez povezovalnega voda EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Opozorilo: Priklopno vozilo se lahko uporablja le z vlečnimi vozili, ki zagotavljajo učinkovitost ABS! s sistemom za dviganje in spuščanje Sistem za stabilnost vožnje Kolesa in pnevmatike Rjdpfxsi Ri Nfe Aphjcf 385/65 R22.5 Jeklena platišča, tovarniško srebrna TPMS – nadzor tlaka po ECE R141, prikaz na zaslonu v vlečnem vozilu prek EBS, brez vgradnje v tovornjak (pogoj je podprtost najosnovnejših gum). Elektrika 24 V, večkomorni žarometi, stranske rumene LED luči rumene LED luči povezane s smernikom "utripajoče bočne luči" 2 sprednji beli pozicijski lučki 2 zadnji rdeče/beli oznaki za sledilnost 2 x 7-pinski varno zamenljivi vtičnici spredaj, brez povezovalnega kabla Hidravlika Nizkotlačni cilinder max. 170 bar, najtanjša stopnja trda kromirana z HDK navojno matico, fiksni del, NW 48 mm (brez cevi). Upravljanje hidravlike preko kardana tovornjaka Keson Jekleni okrogli keson v Stone Master izvedbi iz zelo odpornega jekla HB 400/450. Poševna prednja stena z zunanjo hidravliko in dostopom na prednji steni. Greenline – konična in aerodinamična oblika kesona Nosilec za lopato in metlo zunaj na prednji steni. Membranska zadnja stena Zadnja stena kot nihajna loputa z dvojnim tečajem, zunanja, z dvojnim zapiralom. 2 vijačna zapirala z ročajem spodaj s strani. Stranske stene 4 mm debele, dno 4/5 mm debelo, konstrukcija optimizirana za obrabo in težo Stoječa ploščad z vzponom, priključna plošča za zrak/elektriko in zavore z veliko prostega prostora za optimalno uporabnost. Enostranski rolo pokrov za shranjevanje na FR-desni, z centralnim zaklepom na FR-levi Država homologacije/tablice Nemčija z Dekra potrditvijo in poročilom (po §13 EG-FGV) Odpornost nadgradnje po EN 12642 24/7 servisna linija pripravljeno za enovrstni nosilec tablice Označevanje obrisa z odsevniki po ECE R048, stransko belo, zadaj rdeče Barvanje Okvir DB 7350 Novasiva 10 let garancije proti prerjavenju Podporne noge črno premazane Keson v želeni RAL barvi, enobarvni Rolo pokrov v želeni RAL barvi, enobarvni Na voljo v termoizolirani izvedbi!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. Chassis Low-bed Semi-Trailer Steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin and two kingpin positions, 24 t two-speed landing gear, single-sided operation, with straight lower section, without load compensation Rear support foldable 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Mudguards in front of the 1st axle and behind each axle with antispray, compliant with EC regulations Extendable widenings to 3,000 mm (not in rear slope) Storage compartment for timber planks in the centre of the loading area 70 mm timber planks for extension to 3,000 mm Lashing Points Low-bed 2 pairs of ring lashing eyes each rated for 5 t at the front on the gooseneck 11 pairs of lashing mushrooms embedded on the top and side of the outer frame, each rated for 10 t 2 x on gooseneck 9 x distributed on the low-bed deck First lashing point 250 mm from the front and last one max. 250 mm from the rear, distance between lashing points not greater than 1,100 mm 8 pairs of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) Axles + Suspension SAF drum brake axles Air suspension Wheels and Tyres 235 / 75 R 17.5 Steel rims, twin arrangement, factory silver Braking System 2-line compressed-air braking system Coloured hose arrangement for easy servicing Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 anti-mistake couplings at the front, without connection line With lift & lower valve Axle load detection via EBS-Canbus signal, for display in the driver’s cab Vehicle stability control system Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-mistake sockets at the front, without connecting cable 1 LED beacon with holder 2 pairs of double warning boards, LED lit and extendable to 3,000 mm Floor Gooseneck with steel plate covering Storage box fitted into the ramp to gooseneck Then 70 mm softwood flooring, in wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood flooring Low-bed area including rear slope: 9,200 mm Rodpfji Ri E Rex Aphscf Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber planked Hydraulic operation via tractor auxiliary drive with throttle, operation on left side in driving direction Hydraulic connection with SVK coupling NW 10/3, without connection hoses Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications.

Stanje: rabljeno, največja dovoljena obremenitev: 33.520 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2011, Oprema: ABS, Identifikacijska številka vozila: WFDFLT33502005191 Zadnji prekucnik - jekleni okvir - alu keson Nemški tehnični pregled zapadel Lastna teža: 5.480 kg Dimenzije kesona: 8.350 / 7.500 x 2.460 x 2.200 mm - volumen: ca. 43 m³ BPW Eco Plus osi z bobnastimi zavorami 1 x aluminijasta dvižna noga Rcsdpjwpbg Dofx Aphjf Kombinirana - portalna vrata - nihajna loputa z 2 x drsno zaporo Prevleka na rolo Podest Nastavljiva zaščita proti podvozu Pnevmatike: 385/65 R 22,5 Alu platišča Spremembe, vmesna prodaja in napake so izrecno pridržane. Opis služi za splošno identifikacijo vozila in ne pomeni nobenega jamstva v pravnem smislu. Odločilna je opredelitev v prodajni pogodbi. Naša ponudba je načeloma brez novega TÜV pregleda. V primeru želje po novem TÜV pregledu vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno/označeno z reklamami. Veljajo naši splošni pogoji dobave in plačila.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 14.680 kg, največja dovoljena obremenitev: 35.320 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 600 mm, skupna dolžina: 15.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is just an example. Production and equipment are customized to meet each customer’s needs. Chassis Lowbed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin 24 t, two-speed landing gear, single-sided operation, with straight base, without shift compensation Rear supports, foldable 2x wheel chocks with holders Aluminum side underrun protection Quarter-shell mudguards in front of and behind axle assembly With splash guards behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted transversely at the front of the gooseneck, with 2 storage trays Extendable widenings up to 3,000 mm (not on rear slope) (the track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden beams on the gooseneck, transverse at the front 70 mm wooden beams for extending to 3,000 mm Rcjdpsi Ri Hgefx Aphjf Digger boom recess over the rear axles, extending to the rear, approx. 500 mm wide and approx. 230 mm deep Lashing eyes low loader 3 pairs of lashing eyes rated at 10 t each in front on the gooseneck, 8 pairs at 10 t each in the lowbed, 3 pairs of lashing rails in the track area of the lowbed, 3 pairs of lashing eyes at 10 t each in the axle/rear area Axles and suspension SAF drum brake axles Axles/chassis laser-aligned: reduces tire wear and fuel consumption With steering axle Air suspension Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel twin wheels, factory silver Braking system Two-line compressed air braking system, colored pipes for easier service Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer must only be towed by tractors that ensure ABS functionality! 2 foolproof coupling heads at the front, without connecting line With lift & lower valve, hold function in lower position + auto-reset function Axle load detection via EBS CAN bus signal, for display in the truck cab (truck must be properly prepared, no truck installation, not a certified scale) Vehicle stability system Trailer Info Center, for displaying vehicle data such as axle loads (not a certified scale), mileage, and diagnostics/system messages. Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front 1x additional LED work light at the rear 1x LED beacon with holder, controlled via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck with steel/chequer plate cover 70 mm softwood flooring in the track area, steel/chequer plate in wheel arch area, lowbed left and right in track area hydraulically liftable via truck PTO Rear slope with 70 mm softwood flooring Lowbed length approx. 6,300 mm Side boards 25 mm aluminum hollow section, 400 mm high, insertable at the front and sides of the gooseneck Loading ramps Steel ramps, 2,800 mm long, 750 mm wide Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is for illustrative purposes. Production and equipment will be tailored individually according to customer specifications.

Stanje: rabljeno, največja dovoljena obremenitev: 24.700 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 09/2011, Leto izdelave: 2011, Oprema: ABS, * FLIGEL SDS 410 T Rcedpszmk Ddsfx Aphsf * Dvižno ležišče * Krmilna os * Dvižna os * Vitel * Leto izdelave 2011 * Dobro stanje * Delovni čas od ponedeljka do petka 07:30-12:00, 13:00-18:00, sobota 07:30-17:00. * E-pošta: * Tel/ Whatsapp/ Viber: Alexandar Ilic * Tel/ Whatsapp/ Viber angleško: Mladen Ilic

Stanje: rabljeno, lastna masa: 5.400 kg, največja dovoljena obremenitev: 33.600 kg, skupna masa: 39.000 kg, prva registracija: 07/2018, naslednji pregled (TÜV): 10/2026, vzmetenje: drugo, velikost pnevmatike: 385/65 R22,5, barva: srebrn, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/65 R22,5, velikost zadnje pnevmatike: 385/65 R22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, sistem za imobilizacijo, Kontaktna oseba za prodajo: Frank Rau / ruščina / angleščina / nemščina - Bachar Ibrahim / arabščina / angleščina / nemščina - Storitev za registracijo, tehnični pregled/periodični pregled/pregled varnostnih naprav, prevoz do pristanišča. Osnovna barva: srebrna. Dodatna oprema: Rcsdszq U Tqopfx Aphjf ABS, pripravljeno za vožnjo, cena na zahtevo (mobilna povezava), diskovne zavore, video, blokada za vžig, nosilnost (kg): 33600. Tip nadgradnje: Fliegl SDS01, leto izdelave 2018, SAF osi, dvižna os, diskovne zavore. Pridržujemo si pravico do sprememb.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Leto izdelave: 2026, Prilagoditev prevozne rešitve po meri Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema se izvajata individualno, po željah stranke. Rjdszwn Izspfx Aphjcf Podvozje, sedelna prikolica: jeklena konstrukcija, varjena iz fino zrnatega jekla, sedelna plošča z zamenljivim 2-palčnim kraljevim spojnikom, okvir v ojačani izvedbi za obremenitev vozila, zunanji okvir z "profilom za pritrditev tovora" približno vsakih 400 mm za pritrditev zategovalnih trakov, 10 parov vgrajenih pritrdilnih točk zgoraj/zunaj v zunanjem okviru, vsaka do 10 ton, zadnja opora, zložljiva, 2 podložna klina z držalom, stranski zaščitni elementi iz aluminija, spodnji zaščitni element iz pocinkanega jekla, četrtkrožni blatniki pred prvo osjo in za vsako osjo, z zaščitnimi elementi proti brizganju za vsako osjo, 1 nosilec za rezervno kolo za 1 kolo, z kompletom za pritrditev kolesa, 2 plastična orodjarna omara, š=600 / v=425 / g=460 mm, z zaklepom, zaklep za kontejnerje, 4 pari zaklepov, vgrajenih v pod, za 2 x 20-čevljske ali 1 x 40-čevljske kontejnerje, najbolj sprednja pozicija je zložljiv zaklep, 10 parov žepov za okvirje, vgrajenih v zunanji okvir, notranja velikost 70 x 40 mm, 10 žepov za okvirje, vgrajenih v sredino poda, notranja velikost 70 x 40 mm, 2 vzdolžno vgrajeni letvi za pritrditev/okvirje v celotni širini do zunanjega okvirja, približno 100 mm visoki. Z 20 mm okroglimi jeklenimi letvami, zgoraj in spodaj, razdalja od zgoraj do spodaj približno 60 mm (okroglega jekla). Spodaj s kotno ploščo kot zaključkom, do polovice odprta navzdol. Za pritrditev zategovalnih trakov in vstavljanje okvirjev 80 x 80 mm. Razporeditev: pozicija 2 in 4 po podatkovni kartici Fliegl, 20 vstavnih okvirjev, pocinkano, prostor za shranjevanje aluminijastih rampe, rampe se vstavi od zadnje strani, 3 pari zložljivih ušes 10 ton v zunanjem okvirju. Osi in vzmetenje: osi z diskovnimi zavorami SAF, zračno vzmetenje, 1. os je avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju, upravljanje "3-krat pritisnite zavoro". Zavorni sistem: dvožični zračni zavorni sistem, barvno označene cevi za enostavno vzdrževanje, zavora z vzmetjo, 2 varnostno zaščiteni spojni elementi spredaj, brez povezovalne cevi, EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla, z ventilom za dvigovanje in spuščanje, 2 nastavitvi višine vožnje, nastavljivi z gumbom, 1-krat za višino sedelne prikolice 980 mm, 1-krat za višino sedelne prikolice 1100 mm, višina vožnje v povezavi z dvižno osjo, ob dvignjeni dvižni osi se nosilnost oz. skupna višina poveča za 50 mm, sistem stabilnosti vozila. Kolesa in pnevmatike: 435/50 R19,5, jeklena platišča. Elektrika: 24 Volt, večprekatne luči, stranska rumena LED osvetlitev, 2 beli pozicijski luči spredaj, LED, 2 bela/rdeča luči za ohranjanje voznega pasu zadaj, 2 x 7-polni in 1 x 15-polni varnostno zaščiteni vtiči spredaj, LED delovna luč na strani, 1 x na levi strani in 1 x na desni strani, 2 dodatni LED delovni luči na zadnji strani, 1 rotacijska luč z nosilcem, upravljana preko pozicijskih luči, 2 para opozorilnih tabel, osvetljenih z LED in izvlečljivih do 4000 mm, dodatni 7-polni vtič v spodnjem zaščitnem elementu. Pod: plošče, izdelane s sitotiskom, debeline približno 30 mm, na vzdolžnih nosilcih za visoko točkovno obremenitev za viličarje, do največ 7100 kg, Prednja stranica / vogalni okvirji spredaj: 25 mm aluminijast profil, 1350 mm visok, vogalni okvirji iz jekla v volumenski

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2013, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01, platforma z dvižno osjo, aluminijaste stranske stene, Runge TRANSPORT JEKLA Interna številka za povpraševanja: 0326236 * ABS * EBS * 3 osi, zračno vzmetenje Rcedeyulw Nepfx Aphof * Dvižna os * Diskovne zavore * Os BPW * Aluminijaste stranske stene * Runge Dolžina tovornega prostora: * Dolžina: 13.600 mm * Širina: 2.520 mm Pnevmatike: 1. os: 385 / 65 R 19,5, 20 % zračno vzmetenje / dvižna os 2. os: 385 / 65 R 19,5, 20 % zračno vzmetenje 3. os: 385 / 65 R 19,5, 20 % zračno vzmetenje ----Cena: 7.900,00 EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: * Govorimo: nemščino, angleščino, francoščino, poljščino in…? Pridržujemo si pravico do tiskarskih napak, napak in sprememb brez predhodnega obvestila.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.750 mm, prostornina tovornega prostora: 30 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.400 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema sta prilagojeni individualnim željam stranke. Dodatne informacije Podvozje polpriklopnika-kiperja Varjena konstrukcija iz finezrnatega jekla, lahka izvedba, priklopna plošča z zamenljivim 2-palčnim kraljevskim zatičem Patentiran zaobljen sprednji zaključek 24 t, dvostopenjsko podporno dvigalo, enostransko upravljanje, z ravnim spodnjim delom, brez kompenzacije vlečne sile 2 zagozdi s pritrditvijo Spodnji zaščitni odbijač, zložljiv Polovične blatnike Palica za ponjavo z nosilcem 2 vlečna kljuka na zadku Premi in vzmetenje SAF osi z disk zavorami, 430 mm premer diska Lasersko merjeno podvozje za zmanjšanje obrabe pnevmatik in porabe goriva Premi v off-road izvedbi Zračno vzmetenje 1. os avtomatsko dvižna, z obveznim spuščanjem in pomočjo pri speljevanju Rcjdpfxei Rizij Aphef Pocinkan mehanizem dvižne osi, 10 let garancije proti koroziji Zavorni sistem Dvocevni zračni zavorni sistem, barvno označene cevi za lažje vzdrževanje. Vzmetna parkirna zavora 2 varna priključna glava spredaj, brez povezovalne cevi EBS (elektronski zavorni sistem) s priključkom spredaj, brez kablov Opomba: Prikolico sme vleči le vlečno vozilo, ki zagotavlja učinkovitost ABS! S funkcijo dviganja in spuščanja ventila Sistem za stabilnost vožnje Kolesa in pnevmatike 385/65 R22.5, proizvajalec po izbiri proizvajalca Jeklena platišča, tovarniško srebrna TPMS sistem za nadzor tlaka v pnevmatikah po ECE R 141, prikaz na vlečnem vozilu preko EBS (brez dodatne vgradnje na tovornjak – pogoj je možnost tovornjaka), velja samo za osnovne pnevmatike. Elektrika 24 V, večkomorni žarometi, bočna rumena LED osvetlitev Bočna rumena LED osvetlitev povezana z usmernikom (utripajoča bočna svetila) 2 sprednji beli pozicijski luči 2 zadnji pozicijski luči (bela/rdeča) 2 x 7-polna varna vtičnica spredaj, brez povezovalnega kabla Hidravlika Nizkotlačni cilinder max. 170 bar, najmanjša stopnja trdo kromirana, s HDK navojno spojko, fiksni del, NW 48 mm (brez cevi) Upravljanje hidravlike preko stranskega pogona iz tovornjaka Zgornji del (korito) Aluminijasto zabočno korito iz visoko odpornega proti obrabi materiala, sprednja stena debeline 5 mm, stranice iz 30 mm votlih profilov, čista varjena izdelava, profil zgornjega roba za preprečevanje izsipanja. Notranji dostop na sprednji steni (ni možno v kombinaciji s Cramaro). Zunanje držalo za lopato in metlo na sprednji steni. Greenline – konična in aerodinamična oblika zabočnega korita Membranska zadnja stena Zadnja stena kot nihajna loputa z dvojnim tečajem, zunaj nameščena, z dvojnim kavljem za zapiranje. Zadnja stena z gumijastim tesnilom. Opozorilo! Odporna na vročino do maks. 170°C! Talna plošča debeline 6 mm čez celoto Delovna platforma z dostopom, priključna plošča za zrak/elektriko in zavore z veliko prostornino za optimalno upravljanje. Roll ponjava desno za odlaganje, z osrednjim zaklepom levo Homologacija/tablice Nemčija z Dekra tehničnim pregledom in poročilom (po §13 EG - FGV) 24/7 servisna linija pripravljeno za enovrstično nosilno tablico Obrisna označba z odsevnimi trakovi po ECE R 048, bočno bela, zadaj rdeča Barva Okvir: DB 7350 Novasiva "10 let garancije proti koroziji" Korito: RAL po želji, enobarvno Roll ponjava: RAL 7035 svetlo siva

Stanje: novo, največja dovoljena obremenitev: 25.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 35.000 kg / 48.000 kg Lastna masa: 9.950 kg Nosilnost: 25.050 kg / 38.050 kg Skupna dolžina: 21.000 mm Dolžina nakladalne površine: notranja dolžina ca. 13.500 mm / največja dolžina nakladalne površine 21.000 mm Širina: 2.550 mm Višina nakladalne površine: 950 mm Dodatne informacije Rcjdpfjumha Nox Aphef Novo vozilo iz tekoče proizvodnje, kmalu na voljo Teleskopska zadnja podpora 4 zagozde za podlaganje koles z nosilcem 4 para spuščajočih kontejnerskih zapor v dnu za 1x 40 ft. kontejner ali 2x 20 ft. kontejnerja 1 nosilec rezervnega kolesa za 1 rezervno kolo, z garnituro za pritrditev, v košarici 11 parov žepov za stranice v zunanjem okvirju, primerni za FR-vložne stranice 80x50 mm, vgrajeni poravnano z zunanjim okvirjem, z odprtino za pritrditev pasu ali verige 20 kosov natakljivih stranic B=80 / G=50 / D=1500 mm 1 plastična orodjarna 3 para priveznih ušes po 3,5 t, vgrajenih v stranski okvir – v predelu vratu 13 parov zložljivih priveznih obročev po 10.000 daN, prostoviseče obešenih v profilu stranskega okvirja (primerni tudi za prekomerno široko privezovanje) 1 par zložljivih priveznih obročev po 10.000 daN, vgrajenih ob strani na vmesni podpori Zračno vzmetenje z možnostjo dviga in spuščanja 1. os samodejna dvižna os, dodatno prisilno spuščanje, vključno s pripomočkom za speljevanje z gumbom za upravljanje na polpriklopniku, brez upravljanja iz kabine voznika z ventilom za dvig in spust + funkcija samodejne ponastavitve Kolesa in pnevmatike 235/75 R 17,5" jekleni platišči v dvojni izvedbi, tovarniško srebrni 24 V, večkomorni žarometi, stranska rumena LED osvetlitev 2 sprednji beli pozicijski LED luči 2 zadnji LED luči za označevanje sledi (belo/rdeče) 2 x 7-polna in 1 x 15-polna varnostna vtičnica spredaj, brez priključnega kabla 2 dodatna LED delovna žarometa zadaj, vklop preko vzratne luči 1 odstranljiva opozorilna luč na zaščiti proti podrsu 1 x 7-polna vtičnica zadaj 6 stranskih vtičnic: 2x sprednja stena, 2x podporna noga, 2x zadnji konec (levo + desno), 7-polni 2 delovna žarometa, zgoraj vgrajena v sprednjo steno, vključno s stikalom 2 para table za označevanje prekomerne širine, vsaka s po 2 LED pozicijski lučki na tablo, stransko raztegljive do 3.500 mm, table dodatno nastavljive na nakladalno površino (prilagoditev širine brezstopenjsko) Fiksna jeklena sprednja stena, višina 1.200 mm, z robustnimi jeklenimi vogalnimi stebri brez poševnine v kotih, stransko ravna izvedba 2 luknji za privez zgoraj noter in zunaj v zgornjih kotih sprednje stene Prednji okvir vroče cinkan + zunanji okvir na vidnem delu končna lakirana v RAL 3002 karminsko rdeči barvi Zadnji okvir vroče cinkan + zunanji okvir na vidnem delu končna lakirana v RAL 3002 karminsko rdeči barvi Sprednja stena RAL 3002 karminsko rdeča

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2005, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj = Opombe = 3-osna nizkopodnožna polprikolica, prevozna. Sedežna platforma z vstopnim naklonom cca 4.000 x 2.500 mm, nizkopodnožna platforma cca 9.200 x 2.500 mm. Višina nakladanja cca 920 mm. 44 vpenjalnih ušes in obročev. Dvodelni hidravlični rampi cca 2.150+1.250 x 630 mm. BPW osi, ABS, zračno vzmetenje. Dovoljena skupna masa 41.000 kg, sedlasta obremenitev 11.000 kg, nosilnost 32.100 kg. Kraljevski zatič 2 cola, sedežna višina cca 1.050 mm. 4 zaboji za orodje. Pnevmatike 235-75R17.5. Dvocevni zračni sistem, hidravlična enota. Barva bela. = Dodatne informacije = Lastna masa: 8.900 kg Nosilnost: 32.100 kg Rcjdeyaxnfspfx Aphef Skupna masa: 41.000 kg Pnevmatike spredaj: 235-75 R 17.5 Pnevmatike zadaj: 235-75 R 17.5 Za več informacij kontaktirajte Jan-Marc Schwickerta.