Stas Tpx 7.6 nakup rabljenega (6.153)

Stanje: rabljeno, številka stroja/vozila: 1, lastna masa: 8.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2005, naslednji pregled (TÜV): 10/2020, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 92 m³, vzmetenje: zrak, velikost pnevmatike: 385.65 r 22.5, barva: rdeča, Leto izdelave: 2005, Oprema: ABS, dvižna zadnja plošča, STAS 92m³ moving floor semi-trailer with 21 slats, ideal for waste transport, equipped with adjustable, sealed hydraulic tailgate and a closed roof covering 2/3 of the trailer. Features 3 disc-braked axles with steerable third axle, front platform, model year 2005, inspected until 31.10.2020. Official dealer: INTERDRIVE SRL, Parma. Bjdpfxeh I Id No Al Hewl

Stanje: rabljeno, lastna masa: 9.757 kg, največja dovoljena obremenitev: 32.243 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.127 mm, širina tovornega prostora: 2.325 mm, višina nakladalnega prostora: 2.755 mm, skupna dolžina: 25.500 mm, skupna širina: 39.570 mm, skupna višina: 138.420 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R 22.5, Leto izdelave: 2025, prevoženi kilometri: 1 km, velikost sprednje pnevmatike: 385/55 R 22.5, velikost zadnje pnevmatike: 385/55 R 22.5, emisijski razred: noben, Oprema: ABS, ABS, proizvajalec osi SAF, barva črna, zračno vzmetenje z dvižno osjo, žitni drsnik, dviganje in spuščanje, prekucni zaboj muldenkiper, dvižna os 1. + 3. os, rolo ponjava, disk zavore, stranska zaščita fiksna, jeklena nadgradnja, skladiščna škatla 1, zložljiva podvozna zaščita, Duomatik, manometer za nakladanje, 2x7 + 15-polne električne vtičnice, delovni podest, Wabco Smartboard, stranske LED delovne luči, pnevmatsko sekundarno odklepanje, pnevmatsko zložljiva podvozna zaščita, avtomatsko spuščanje pri kipanju, Alcoa Dura Bright, posamezni blatniki na kolesih, nosilec za metlo in lopato, 2x LED vzvratne luči, aluminijasta lestev. Bwodjydfvqopfx Al Hol

Stanje: rabljeno, največja dovoljena obremenitev: 35.580 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2021, dolžina tovornega prostora: 10.485 mm, širina tovornega prostora: 2.474 mm, višina nakladalnega prostora: 1.895 mm, prostornina tovornega prostora: 49 m³, Oprema: ABS, STAS S300CX 49 m³ V uporabi od 5/2021 Dvižna os ADR: EXII, FL, OX, AT Nakladalna površina: 10.485 x 2.474 x 1.895 mm Medosna razdalja 1.410 mm Osi 9 ton SAF osi Kombinirana vrata Ponjava Kolutne zavore Pnevmatike 385/65 R22,5 Stanje: 1. os 10 mm 2. os 11 mm 3. os 12 mm Rezervna Lastna masa 6.420 kg Skupna masa 42.000 kg KOT NOVO – SAMO KMETIJSKI IZDELKI! Več informacij: FB: Dvorak Trucks Czechia UVOZ-IZVOZ-PRODAJA-NAKUP-KOMISIONSKA PRODAJA TOVORNJAKOV IN GRADBENE MEHANIZACIJE SERVIS TOVORNJAKOV SERVIS PNEVMATIK Bsdjw I Ivzspfx Al Hjwl TOVORNJAŠKA AVTOPRALNICA PREVERJANJE TAHOGRAFA

Stanje: rabljeno, številka stroja/vozila: YE6S300ZXH0000870, Leto izdelave: 2017, Oprema: ABS, = Dodatne možnosti in oprema = - Elektronski zavorni sistem (EBS) Bwsdpfx Aloypca Ds Hel = Dodatne informacije = CE oznaka: da

Stanje: rabljeno, številka stroja/vozila: YE6SZ339V600R0459, konfiguracija osi: 3 osi, prva registracija: 07/2006, dolžina tovornega prostora: 13.350 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.750 mm, skupna dolžina: 13.950 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2006, Oprema: ABS, = Más opciones y accesorios = - Hidráulica = Notas = Chasis Altura del chasis: 100 cm Altura del perno de acoplamiento / barra de tiro: 120 cm Estructura Hidráulica: ✓ Depósito Combustible: ✓ Bwodpfx Aoyq R Ryjl Hsl = Más información = Configuración de ejes Tamaño de neumáticos: 385/65 R22.5 Marca de ejes: Mercedes Frenos: Frenos de disco Suspensión: Suspensión neumática Eje 1: Perfil neumático izquierdo: 65%; perfil derecho: 10% Eje 2: Perfil neumático izquierdo: 75%; perfil derecho: 15% Eje 3: Perfil neumático izquierdo: 70%; perfil derecho: 15% Pesos Peso en vacío: 7.960 kg Carga útil: 31.040 kg Peso bruto: 39.000 kg Funcional Carrocería: Stas Altura de la plataforma de carga: 110 cm Identificación Matrícula: QAZ297 = Información de la empresa = Para más información sobre esta unidad, por favor llame o envíe un correo electrónico a: . Puede consultar el inventario completo en: . No olvide suscribirse a nuestro boletín para recibir actualizaciones semanales sobre nuestro stock.

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2025, prostornina tovornega prostora: 100 m³, Leto izdelave: 2023, Oprema: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR – STEERED AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross Vehicle Weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS FIFTH WHEEL HEIGHT: Exact fifth wheel height is 1,150 mm. AXLES: Tridem axle set. Manufacturer: SAF – CUSTOM DESIGN (CD). Capacity: 3 x 9 t. Suspension: Original SAF air suspension. Brakes: Large disc brakes. Rim offset: ET 120. Wear indicator: with. First axle is an automatic lift axle controlled by the EBS-E system. The third axle is a trailing steer axle. Connection: BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID: The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lift and lower function. Aluminium air tank. STEERING AXLE LOCKING: Trailing steering axle locking is achieved as follows: – via reverse lights – with a button in the truck (truck equipment not included). TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. BRAKING SYSTEM – EBS: EBS-E system WABCO 2S/2M – PREMIUM MODULATOR. Two-line compressed air brake system according to CE directives. Spring-loaded parking brake on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING – ASPÖCK: 24 volt electrical system. 2 x 7-pin + 1 x 15-pin sockets ISO connection. Aspöck light set. Orange LED side marker lights mounted on trailer side. Without rear distribution box – NORDIC. REAR LIGHTS IN UNDERRUN PROTECTION: Lighting is mounted in fixed aluminium underrun guard. With foldable aluminium light protection cover. 2 x 1 five-chamber lights – EUROPOINT III – LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection below the body ahead of the landing legs. ACCESSORIES EXTENDABLE LADDER REAR: Extendable ladder integrated at the rear of the vehicle (right-hand side). PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. Bjdpfxexplxzo Al Hjwl TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm). SPARE WHEEL HOLDER: Aluminium single spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminium plank profiles. INTERIOR SEALING BETWEEN FLOOR AND FRONT WALL: Fixed seal between floor and front wall using aluminium profile and PVC seal. SIDE WALLS: Smooth finish inside and out. Double-walled side wall profiles: 600 mm wide, 30 mm thick, 3 mm inner, 2 mm outer (grain version). Side wall profiles are continuously welded on the inside. WEAR PLATE: Wear plate in aluminium, rectangular, at rear inside, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electronic control. 21-board floor system. Drive segment comprises 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear stainless steel end plate. FLOOR OPERATION: E-control – Electric with radio remote control (original Cargo Floor). Loading – stop – unloading via switch. Manual emergency operation via unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 ribbed aluminium floor boards – 8 mm thick with welded aluminium end caps. REAR DOOR: 2 portal doors ...

Stanje: rabljeno, največja dovoljena obremenitev: 29.990 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, prostornina tovornega prostora: 52 m³, skupna širina: 2.550 mm, Leto izdelave: 2024, Oprema: ABS, Type of chassis: V-chassis King pin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Techn. perm. gross weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Total length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Load length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer’s choice) Offset (ET): 120 Option 1st axle: with lift axle and starting aid Activation of starting aid via button in the truck (button installation not included in standard equipment) and by operating the brake pedal three times Option 3rd axle: with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator: connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping, manually lockable via Smartboard and switch on chassis Coupling head: Pneumatic European palm coupling Tire brand: Manufacturer’s choice Rims: Alcoa Dura Bright Tire type: Regional application Wheel nuts: Open Wheel nut covers: Chrome with STAS logo Landing legs: Weweler steel gear landing legs, type Weweler, with compensating feet, single-sided operation and 2 speed stages Underrun protection operation: manual Spray flap underrun protection: Black with STAS logo, mounted across the entire width of the underrun guard Fixation of spray flap underrun protection: fixed Underrun protection cover: with covers Grip on underrun protection Control console EBS operation: On driver’s side, before the axles Bwedpsupqi Eofx Al Hsl Toolbox Position toolbox: On driver’s side, before the axles Material toolbox, driver’s side, before axles: Plastic Toolbox dimensions, driver’s side, before axles: 860x520x500 mm Mudguard type: Domar STAS with white stripe Number of mudguard spray flaps: 2 pieces Mudguard spray flap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (actuation via switch): 2 pieces LED reversing lights at rear on driver’s side and passenger side, mounted on last cross member of frame (controlled via reversing signal) Work light position (actuation via switch): 2 pieces LED reversing lights at the front on driver’s and passenger’s side, mounted in area of the landing legs Tipping cylinder manufacturer: Hyva (STAS manufacturer’s choice) Tipping cylinder type: Hydraulic cylinder, large casing Cylinder tipping angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Surface finish of cylinder stages: Standard Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: On driver’s side, on lamp carrier Aluminium access ladder 3 m - passenger side Fixing access ladder for rear entry with hook for hanging Broom and shovel holder with 3 brackets each, mounted on driver’s side of chassis Two plastic wheel chocks incl. holder Locking device chassis-superstructure: Rubber stoppers (not for FSS 74 and 86) Air and electric console: Mounted on passenger side Body A-board on trough (not foldable) - right side (Note: incomplete entry - 'Neigu...' likely cut off)

Stanje: rabljeno, največja dovoljena obremenitev: 30.060 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 9.665 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 9.665 mm, prostornina tovornega prostora: 51 m³, Leto izdelave: 2024, Oprema: ABS, Last king pin National 12t Axle load National 8t Axle spacing 1310-1310 mm Saddle height 1150 mm Chassis width 1400 mm Internal height front 2165 mm Internal height rear 2165 mm Overall width 2550 mm Wheelbase 6800 mm Overall length 10656 mm Chassis material Aluminium Tyres 385/65R22.5 Loading length 9665 mm Axles SAF Brake type SAF - SBS 2220 Offset (ET) 120 Option 1st axle With lift axle and starting aid Activation of starting aid Via push button in the truck (mounting of button not included in scope of supply) and by operating the brake pedal three times Brake pad wear indicator Not connected Tyre inflation system (Tire Pilot) Without Tyre pressure monitoring Wabco Trailerpulse Air suspension ECAS with lift and lower valve Lowering of air suspension Automatic lowering of air suspension during tipping, can be manually locked via smartboard and a switch on the chassis Pneumatic coupling head European palm coupling Wheel nut caps Chrome with STAS logo Landing legs Aluminium drop support legs mounted at the front of the chassis, operated individually from both sides, support capacity 20t / P Underrun protection operation Manual Tow eye Once, in driving direction Mud flaps underrun protection Black with STAS logo Cover underrun protection Handle underrun protection With Control console EBS operation In direction of travel, in front of axles Tool box position In direction of travel to the left, in front of axles, plastic Tool box dimension - Left in front of axles 860x520x500 Mudguard type Domar STAS with white line Number of mud flaps on mudguard 2x Mud flap type mudguard Clear Pass Lighting manufacturer Aspöck Lighting type ECOLED II Work lights (operated by switch) With Position work lights (operated by switch) 2x LED reversing lights in front, to the left and right in direction of travel, in the area of the landing legs Tipper cylinder brand Hyva Tipper cylinder type Hydraulic cylinder with large casing Tipper cylinder model Hyva - FC 169 Tipper cylinder stroke 7130 Tipper cylinder max. pressure 250 Surface treatment of cylinder stages Standard surface treatment Hydraulic coupling Rotating coupling Bedpfx Alouar Amj Hewl Hydraulic coupling - size 1 Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminium leaning ladder 3 m Leaning ladder mounting for rear access With hooks for hanging Position broom and shovel holder 3 holders each, on chassis to the left in direction of travel Loading pressure gauge Ø 100 mm - mounted at the front on the chassis With two plastic wheel chocks including mount Body support device Chassis - Body Rubber stops Air and electrical console Centrally in direction of travel with gallows Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type Combination door Internal lower belt profile inclination (°) 90 Floor 8 mm ALU - 110 Brinell Position rubber pads below floor crossmembers Front wall 4 mm (Alu) Profile side wall 3 mm - 2 mm smooth finish inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall Alu Combination door type 1/2 - 1/2 with swivelling upper crossbar Door leaf opening Right door leaf opens first (STAS manufacturer choice) Upper crossbar Swivelling version Hinge type With double door hinge (double-joint hinge) Slider Rectangular design, standard Slider position 2 pieces, with control handle, 1 each to left and right in direction of travel Securing of open door leaves By chain Rear wall seal With standard rubber seal

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2008, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 50 m³, Chassis ALU chassis, aluminum alloy 5383H34 Two fully automatically welded T profiles (width 200 mm) Corrosion protection between steel and aluminum parts, continuous rubber bonded under pressure to the longitudinal beams, maximum stability with integrated tipping bearing shaft fitted with wear-resistant special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated inside a plastic tube. Axles and Suspension Disc Brakes Jost disc axle assemblies 3 x 9 tonnes with DCA air suspension system, raising and lowering valve, load pressure gauge, third axle automatically liftable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 50-60% tread remaining, on silver steel rims, size 11.75x22.5 ET 120. Landing Legs Mechanical landing gears, load capacity 2 x 20 tonnes, with pivoting feet for use with air suspension systems. Brake System According to E.G. standard, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M with RSS (Roll Stability Support), ALU air reservoir. Electrical System According to StVZO regulations with 2 five-chamber Aspöck LED taillights, 24-volt system with two 7-pin and one 15-pin front sockets, EBS socket, side LED outline markers, 2 clearance lights, 2 separate LED reversing lights. Tipping Body/Tipper Body Aluminum tipper body, side walls with welded vertical aluminum profiles, approx. 6 mm floor of highly wear-resistant aluminum alloy (5383H34), Brinell HB 110, sloping front wall of 4 mm aluminum with reinforcing profiles for tipping cylinder bracket, side walls 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and wing door (2/3-1/3 split), with double hinge, made of 4 mm aluminum, single grain discharge slide with water protection, wear plates on the side approx. 400-1,000mm x 3,000mm x 4mm. Hydraulic System Hydraulic cylinder mounted on front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2m hydraulic hose and loose half 1". Bjdpfjxf Spfox Al Hewl Accessories 6 Parlok plastic mudguards with 2 Stas mudflaps, 3 m aluminum ladder, reinforced collapsible underrun protection with 2 towing eyes, one foldable side guard, walkway on bulkhead with left-hand access ladder, 3 ALU bows with swing function, one central additional bow holder, roll tarp with central ALU tube, roll tarp system, tarp material quality approx. 660g/m², tarp fastener with quick-release catch (no tension straps), wheel wrench, 2x wheel chocks, toolbox type 800, continuous spray guard fitted on underrun protection, etc. Offer and pictures non-binding.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2021, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 53 m³, Chassis, Light Version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width 1,600 mm. Axles and Suspension Disc brakes 430 mm, "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, centrally mounted to the chassis longitudinal beam, 1st axle with liftable air bellows, starting aid function and manual forced lowering, Smart Board info center, lowering valve, front load pressure gauge. Bwsdpfsyiw T Esx Al Hel Tyres and Wheels on Aluminum Rims 6 wheels with tires 385/65 R 22.5 approx. 50%, 11.75 x 22.5 ET 120, UNI wheel bolts for aluminum rims. Kingpin 2" screwed into an 8 mm thick "light" plate Landing Legs Support winches, loadable to 2x20 t, with swiveling base for air suspension Brake System Built according to E.G. standards, dual-line Wabco system, spring-actuated parking brake affecting two axles, Wabco EBS-E with RSS (roll stability system), Wabco Smartboard Info Center, aluminum air tank system. Electrical System According to STVZO guidelines, with 3 round three-chamber lamps type Aspöck, 24V system with 2 x 7-pin and 1 x 5-pin sockets, 2 x 7 side outline markers, 2 LED reversing lamps centrally at the rear, 1 round fog lamp, 4 LED work lamps, 1 interior LED lamp, 4 red LED position lamps in the door bar. All air and electrical lines are neatly routed in plastic tubing! Tipper Body / Body “Smooth Design”, Body Interior Fully Welded Aluminum tipper body, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 8 mm high-wear-resistant alloy (5383H34/HB 110) with 90-degree profile to the side wall. Front wall 4 mm reinforced, straight design. Tailgate as universal door, straight version, with two half-and-half swing doors and grain chute. Universal door operated automatically-pneumatically, lockable via separate lever, rear portal in aluminum, swing-away, two hold-downs with rubber buffers on the tipper body, fixed to the front wall. Hydraulics, Tipping Cylinder with “Sleeve” Suspension Hydraulic cylinder mounted on the front wall, working pressure 150 bar, Edbro make, with approx. 2.5 m hydraulic hose and quick coupling 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete splash flaps across full vehicle width mounted on underrun protection, no aluminum spare wheel holder, side underrun protection right, foldable version, large toolbox type 860, approx. 3 m aluminum ladder, 3 aluminum swing bars mid, approx. 150 mm raised with additional middle support, roll tarp with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality, roll tarp system with fast tension closure, surrounding rubber cord at rear edge of tarp with two catch hooks to be fixed on the rear swing bar, catwalk on frame, tarp closure at rear with welded-in rubber cord for water ingress protection, robust foldable underrun protection, 2 "Clear-Pass" mud flaps to EG standard mounted on mudguards, side-mounted on the frame an aluminum grain funnel with drawstring bag, brackets for shovel, broom, and scraper mounted over axles, etc… Unladen weight: 5,950 kg Offer and images subject to change.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2017, dolžina tovornega prostora: 10.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 50 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension, Disc brakes 430 mm “off-road version” SAF-Intradisc axle units 3 x 9 t with SAF air suspension, airbags centrally positioned to chassis longitudinal beam, 1st axle liftable with start-up aid and manual forced lowering, Smart Board Infocenter, raise/lower valve, 3rd axle with trailing steering, electrically lockable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 40-50% tread, with Alcoa "satin" aluminium rims 11.75 x 22.5 ET 120, UNI wheel bolts for aluminium rims. Bwsdpexf Sn Ijfx Al Hol Landing Legs Mechanical version, single-side operation with two speeds, swing foot for air suspension, 2x20t support load. Braking System According to EU standard, two-line Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability-System), Wabco Smartboard Infocenter, aluminium air reservoir system. Electrical System According to German Road Traffic Licensing Regulations (StVZO), with two five-chamber lamps type Aspöck Ecopoint 2, 24V system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines are neatly routed in plastic conduit. Tipping Body / Tipper Body, Inside Fully Welded Aluminium tipper body, sidewalls 30 mm thick plank profiles (2-3 mm), 600 mm wide, fully welded. Floor 8 mm wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight; rear wall double-leaf door, straight, with two doors in 1/2-1/2 design, each with a grain chute. Air vibrators under the floor with pneumatic operation, rear spreader made from aluminium, pivoting, two hold-down devices with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System, Tipping Cylinder with “Cardan” Suspension, 7,630 mm lift Hydraulic cylinder mounted on front wall, working pressure 220 bar, brand Hyva, 220 bar, approx. 2.5 m hydraulic hose and loose 1" half coupling, tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, full-width spray flaps on underrun bar, ALU spare wheel holder, foldable right side underrun protection, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swinging bows, raised approx. 150 mm in centre, tarpaulin with central light strip and separate reinforcement in wear areas, approx. 660 g/m2 quality, with rolling tarpaulin system, circumferential rubber cord at rear closure with two tension hooks to be fixed to rear swing bow, walkway at tipper body with access on left, side tarpaulin closure with tension straps, rear tarpaulin closure with welded-in rubber cord for water protection, robust foldable aluminium underrun protection with two towing eyes left & right incl. locking pins, 2 “Clear-Pass” mud flaps on wheel arch to EU standard, etc. Offer and photos subject to change.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2013, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Bsdpfjyiw T Ssx Al Howl Axles and suspension Disc brakes 430 mm "off-road version" SAF-Intradisc light axle assemblies 3 x 9 t with SAF air suspension, central-positioned air bellows on chassis longitudinal member, 3rd axle liftable with starting aid and manual forced lowering, Smart Board info center, lift-lower valve, BVA brake wear indicator Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70 % remaining tread, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" – screwed into an 8 mm thick plate Landing gear Mechanical landing legs with 2 speeds, 2x20t support load, with swing foot for air suspension, Brake system According to E.E.C. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-stability-system), Wabco Smartboard Info Center, aluminium air reservoir system Electrical system According to German Road Traffic Licensing Regulations (StVZO) with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipper body/smooth body design, interior fully welded Aluminium tipper body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 6 mm thick high-wear-resistant alloy (5383H34/HB 110), with 45-degree angled profile to side wall. Front wall 4 mm, reinforced, angled design. Rear wall as universal door in straight design, with two-leaf doors (2/3-1/3 split) and one grain slide, ALU round profile welded to seal the door gap on the rear doors, side and bottom. Rear doors partly covered with smooth aluminium sheeting. Universal door operation is automatic-pneumatic with separate lever lock, rear swing bar in aluminium, two hold-downs with rubber buffer fixed to the tipper body at the bulkhead. Hydraulic system Tipping cylinder with "Rotulen"-mounting (light) Hydraulic cylinder mounted at the front wall with 150 bar working pressure, brand Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across the entire vehicle width fixed to underrun protection, no spare wheel holder (aluminium), foldable side underrun guard (right), large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing bows approx. 150 mm raised in the centre, an additional centrally mounted bow holder for positioning in total 2 bows to increase loading width, rolling tarpaulin with central light strip and separate reinforcements in wear areas, 660 g/m2 quality with rolling tarp system, all-around elastic rope on rear closure of tarpaulin with two hooks fixed to the swing bow at rear, catwalk on chassis in chassis colour with steps left and right, side tarp closure with quick lock, rear tarp closure with welded elastic rope for water resistance, robust foldable underrun guard in aluminium, 2 "Clear Pass" mud flaps at mudguard to EC standard, side-mounted on frame one aluminium grain funnel with sack, brackets for shovel, broom and scraper mounted above axles, etc. Curb weight: 5,960 kg Offer and images non-binding

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2000, Stas S 3SA 334K Leto izdelave: 2000 3-osni Zračno vzmetenje Ponjava 2 x podporni nogi Lastna teža: 5.260 kg Največja dovoljena masa: 38.000 kg Bsdsydb R Ropfx Al Hswl = Dodatne informacije = Prazna teža: 5.260 kg

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Bodpfxjyh S Aio Al Hjwl Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Bwsdpfx Alsfi Nmwe Hsl Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2000, Stas S 3SA 334K Letnik: 2000 3-osni Zračno vzmetenje Ponjava 2 nosilca Lastna teža: 5.260 kg Skupna dovoljena masa: 38.000 kg = Dodatne informacije = Lastna masa: 5.260 kg Bwsdpfjyda Tdsx Al Hol Nosilnost: 32.740 kg Skupna dovoljena masa: 38.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2001, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Ponjava Bsdeyda E Hepfx Al Hswl 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg = Dodatne informacije = Prazna masa: 5.260 kg Nosilnost: 33.740 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2008, Oprema: ABS, Stas S 339 CX Letnik izdelave: 2008 Zračno vzmetenje 3-osni Ponjava Bwsdpfx Aljydavxs Hsl 2 x podporni nogi Polkrožni prekucnik = Dodatne informacije = Lastna teža: 6.800 kg Nosilnost: 32.200 kg Dovoljena skupna masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2015, Oprema: ABS, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Ponjava 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg = Dodatne informacije = Prazna masa: 5.260 kg Nosilnost: 33.740 kg Bwodpfxjydargo Al Hjl Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, lastna masa: 7.910 kg, največja dovoljena obremenitev: 31.090 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, stanje pnevmatik: 40 odstotek, barva: srebrn, Leto izdelave: 2018, velikost sprednje pnevmatike: 385/65 22,5, velikost zadnje pnevmatike: 385/65 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 40573 Stas, S 300CX * Year of manufacture: 2018 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Air line coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage/toolbox * Aluminium tipping body * Platform * Sliding tarpaulin * Grain outlet slider * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,910 kg * Payload: 31,090 kg * Permissible gross weight: 39,000 kg Bwsdpeyicqyjfx Al Hel * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Wabco SmartBoard * Rear support * Wear plates left and right * Folding underrun protection Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes e.g.: * Purchase / sale / rental of commercial vehicles * Quick, hassle-free financing * Processing all (export) documents * Ordering of export / customs number plates * Vehicle preparation: New tarpaulins, decals, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer and delivery of commercial vehicles Consult our trained specialists – we are happy to advise you.

Stanje: rabljeno, največja dovoljena obremenitev: 28.150 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, prostornina tovornega prostora: 92 m³, Leto izdelave: 2019, Oprema: ABS, * Stas 3-axle Walking Floor S300ZX Bwedpfx Alsw H Hprs Hel * 10 mm floor * approx. 92 m³ * Radio remote control * Roll tarp * Air suspension * 2x lift axles * Disc brakes * JOST axles * EBS * ABS

Stanje: rabljeno, največja dovoljena obremenitev: 32.550 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2016, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.350 mm, Oprema: ABS, Stas S300CX Prva registracija: 25-08-2016 Aluminijasto šasijo / Jeklena keson SAF osi s kolutnimi zavorami, ABS in EBS Zračno vzmetenje Smartboard Serijska številka: YE6S300CXG0001112 Pnevmatike: 385/65 R22,5 35% Bwjdpoyf Sf Uefx Al Hel Skupna masa: 39.000 kg, Lastna masa: 6.450 kg, Nosilnost: 32.550 kg Preklopna zaščita proti podletu Kesa: D-8,50 m, Š-2,35 m, V-1,50 m = 30 m3 Izdelano za ADR homologacijo Pridržujemo si pravico do napak/napisnih napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 30.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.664 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles, controlled via the EBS-E system ----Suspension: * Air suspension with lifting and lowering function (automatic lowering during tipping – can be manually blocked via SmartBoard or by switch on the chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * Start assist activated via button in the truck – no truck-side installation required – as well as by pressing the brake pedal three times * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (activated via reverse gear) * 1 LED work light each on the side at the support legs ----General Equipment: * Aluminum air tanks * Weweler crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox on left side approx. 860 x 520 x 500 mm * Air blow gun with 16 m hose reel in toolbox * Closed single plastic mudguards * 1 dust bag incl. holder on right side * 3m aluminum ladder stored on right above mudguards * Shovel and broom holders on left above mudguards * Load pressure gauge mounted at the front of the chassis * Access steps and standing platform mounted at the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping trough – rectangular – with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted on inside of the left front wall of the body * Smooth side walls inside and outside * Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inside and 2 mm outside * Side wall profiles continuously welded inside, 90° corners with right-angled profile between floor and side walls – ensures the full floor width can be used * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor with 110 Brinell quality * Combination double-wing rear doors – upright, with double hinges and reinforcement profiles, each with grain shoot and all-round rubber seal * When doors are open, they are fixed by chains to lie flat against the side walls * Fourfold lower door locking hooks automatically open during tipping – can be pneumatically locked using valve on the frame ----Roll Cover: * Roll tarp – in RAL 9005 deep black – with three side tension belts * Trapezoidal tarp support 150 mm high on front wall and rear tailgate ----Load Volume: * Load volume 51.8 m³ ----Fifth Wheel Height: * Fifth wheel height 1,150 mm ----Info: * Superstructure and chassis painted with acrylic paint in RAL 9005 deep black * --Permissible gross weight of 39,000 kg technically possible-- * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf Bwedpfxjwgg Uze Al Hjl

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvižna os * ALU platišča Bwedpfx Aljw Rit Ts Hjl * JOST osi * Pomikajoča cerada * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje Podpora preko WhatsAppa na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa.

Stanje: rabljeno, največja dovoljena obremenitev: 33.370 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2014, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.160 mm, Oprema: ABS, Stas S300CX izolirani asfaltni kiper Prva registracija Bwsdpfx Aox Txmisl Hsl MB osi z disk zavorami, ABS in EBS Zračno vzmetenje Smartboard Serijska številka: YE6S300CXD0001049 Pnevmatike: 385/65 R22,5 35% Skupna teža: 39.000 kg, lastna teža: 5.630 kg, nosilnost: 33.370 kg Delovni podest Ročna ponjava 3x žitna zaporna loputa Poklopna zaščita proti podletu Box: D-8,50 m, Š-2,35 m, V-1,50 m = 30 m3 Izdelano za ADR homologacijo Pridržujemo si pravico do napak/tipkarskih napak in vmesne prodaje.