Müller-Mitteltal Tra-Kombi 18,0 Abroll/Absetz/Tieflader nakup rabljenega (29.664)

Stanje: rabljeno, največja dovoljena obremenitev: 6.140 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, prva registracija: 05/2004, skupna dolžina: 5.200 mm, skupna širina: 2.550 mm, skupna višina: 2.750 mm, Enoodosni priklopnik za transport kablov, hidravlična enota za dvižno napravo, hidr. pogon za vrtenje bobna, možnost vrtenja v levo in desno, oporni nogi zadaj, največji premer bobna približno 800–3000 mm, notranja širina med rokami bobna 1.700 mm, nastavljiva vlečna priklopna palica, os(i) SAF, bobnov sistem zavor, listnate vzmeti, oporno kolo, vozilo je mogoče oblepiti z reklamami in/ali označiti. SI87135 Naša ponudba običajno ne vključuje novega tehničnega pregleda. Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je mogoče oblepiti z reklamami in/ali označiti. Veljajo naši splošni pogoji dostave in plačila. Z veseljem vam pripravimo ponudbo za financiranje ali lizing tega vozila. Prosimo, da nas kontaktirate! Guedpfx Aiszq Nfbeasf

Stanje: rabljeno, lastna masa: 3.280 kg, največja dovoljena obremenitev: 14.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2013, vzmetenje: zrak, velikost pnevmatike: 265/70 R19,5, medosna razdalja: 5.030 mm, Oprema: ABS, Müller-Mitteltal hooklift trailer | Toolbox | Hot-dip galvanized | Tyres: 265/70R19.5 | BPW disc brakes | TÜV valid until | Subject to errors, input mistakes, and prior sale. Guodpfx Ajwd Sdcjiasf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Coupling Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety lock pin for various support heights * Enclosed steel mudguards with spray protection * Enclosed side underrun protection usable as advertising panel * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Body: * Swiveling cable drum body, clear width between drum arms 1,700 mm, with tension lock for securing drums at the support arm ends, as well as a central claw lock to secure the cable drum body to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive Gujdpfou I Iqxjx Aiasf * Steel drum shaft with 76 mm diameter including centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset ----Chassis: * Chassis made of torsion-resistant square tubes and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS brake system * Drum brakes * Emergency release device for spring-loaded cylinders Gjdpfxsu I Iqlj Aiajuf ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange eye: * Drawbar with 40 mm screwed towing eye (height adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring ----General attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate; safety locking pins for various support heights * Closed steel sheet mudguards with splash protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Superstructure: * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with tension locks for securing the drum at the ends of the support arms, and central claw locking device securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-covered drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brake System: * EBS braking system * Drum brakes * Emergency release device for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate. Safety locking pins for various support heights * Closed steel mudguards with spray protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor inlay (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock on the drum arm ends, plus central claw lock securing the cable drum superstructure to the chassis * Motor-driven hydraulic cable drum drive with oil motor Godpfx Aisu I Iq Ejajuf * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped ----Chassis: * Chassis made from torsion-resistant square tubing and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Notes: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Electrical / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting * Flashing LED side marker lights ----Drawbar / Flanged towing eye: * Drawbar with 40 mm bolt-on towing eye (height adjustable in mm) ----General attachments: * Support winch at front * Spring-assisted square tube supports at rear with base plate, safety lock pins for various support heights * Enclosed steel fenders with splash guards * Enclosed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for drum securing at the ends of the support arms, as well as latching of the cable drum superstructure to the chassis via a centrally located claw lock * Motor-driven hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepwise offset * Preparation of steel construction and hydraulics for retrofitting an auxiliary engine ----Chassis: * Chassis made of torsion-resistant square sections and cross-members ----Hydraulics: * Hydraulic lines for supply and return ----Tyres: * 315/80 R 22.5 tires ----Painting: * Vehicle is hot-dip galvanized ----Info: * 2,690 kg curb weight * New vehicle with full manufacturer's warranty Gedpfx Asxyniweiaeuf * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: Gjdpeykx I Hjfx Aiaouf * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear Gsdpfx Aoykx I Tjiasuf ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low Loader Platform: * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: novo, največja dovoljena obremenitev: 15.970 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21,0: ----Zavore: * Wabco EBS-E (elektronski zavorni sistem) * Naprava za hitro sprostitev zavor za vzmetne akumulatorske cilindre * Bobnaste zavore ----Os: * 2 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z sistemom za dvigovanje in spuščanje ----Vlečna droga / prirobnična vlečna droga: * Vlečna droga s 50 mm prirobnično vlečno drogo in nastavljiva vlečna droga po višini ----Osvetlitev / električni sistem: * 15-polni električni vtič * LED luči 12/24 V * Sistem za nadzor tlaka v pnevmatikah (RDÜ) ----Splošni dodatni deli: * Jost podpiralna opora spredaj * zunanja zložljiva podpora zadaj * plastična orodjarna škatla, pribl. 750 x 350 x 300 mm, na desni strani * stranska zaščita pred trkom * plastični četrtni blatnik ----Površina nizkega prikolice: * pred sprednjo steno in zadnjo poševnino, naprava za naknadno namestitev varoval za pritrditev kontejnerjev za prevoz 20" kontejnerjev * Izvedba 21 ton GG z okrepljenim okvirjem in okrepljenimi osmi * Paket za okrepitev za prevoz vrtalnih naprav na šasiji * 50 mm iglasti leseni pod * pred sprednjo steno naprava za naknadno namestitev varoval za pritrditev kontejnerjev * vijakna sprednja stena iz gladke pločevine * deljene stranske stene iz jeklene pločevine - trapezno profilirane - zložljive s centralnim zložljivim okvirjem * jeklena zadnja stena, ki se pomika med rami - nosilec, ko ni v uporabi, na notranji strani pred sprednjo steno * zadnji okvirji, vijakni ----Pritrditev tovora: * luknjičast zunanji okvir, približno 45 stopinj upognjen, z vlečno silo 2 tone na 480 mm * možna vgradnja 3-tonskih pritrdilnih obročev na vsakih 600 mm * Profifix pritrdilna letva v vzdolžni osi na sredini za pritrditev do LC 3000 daN * v kotih spredaj in zadaj po 1 x 10 ton pritrdilni obroč * Lasi-paket, z 2 x 8 ton pritrdilnimi obroči na vsaki strani, potopljeni v zunanji okvir, na sprednji in zadnji nosilni strukturi različne luknje za pritrditev 1,2 tone ----Rampe: Godpfx Aiol Tihxsaeuf * enodelne mehanične rešetaste rampe z vzmetjo za enoosebno upravljanje, pribl. 3.000 x 620 mm (lahko se pomikajo skupaj do 20 mm) * zadnja poševnina pribl. 860 mm ----Višina nakladanja: * prazna pribl. 940 mm * natovorjena pribl. 910 mm ----Medosjna razdalja / pnevmatike: * 1.810 mm * Pnevmatike: 235/75R17.5 ----Barvanje: * Barvanje stranskih sten v RAL - 9010 čisto bela * Vlečna droga, sprednja stena, zadnja vrata, zložljive podpore in rampe prevlečene z vročo pocinkovanjem * Os, vzmeti, zračni rezervoar in podpiralna opora, prevlečene s črno barvo ----Informacije: * Novo vozilo z garancijo proizvajalca * Pridržane napake in vmesna prodaja ----Dobavni rok: * takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Zavore: * Zavorna sistem EBS * Sistem za izpust zavor v sili za vzmetne zavorne cilindre * Bobnaste zavore ----Os: * 2 x 5,5 t BPW osi ----Vzmetenje: * Listne vzmeti s kompenzacijskim agregatom ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica, nastavljiva po višini za 300 mm * 40-milimetrska prirobnična vlečna palica ----Splošni dodatni deli: * Sprednja podpora Jost * Zunanja, vroče pocinkana zložljiva podpora zadaj * Plastični četrt blatnika * Plastična orodjarna škatla spredaj desno, na čelni steni ----Elektrika / razsvetljava: Gujdpfxsrvvfwj Aiasf * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED-razsvetljava ----Nosilna površina: * Nosilna površina 6,27 m * Primerna za prevoz kontejnerjev * 50 mm debelo dno iz iglastih plošč * Pred čelno steno pritrdilni element za poznejšo namestitev zaklepov za kontejnerje * Vijična čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine, trapezno profilirane, zložljive z vzmetjo za dvižni stranski pokrov * Jeklena zadnja stena, ki se lahko pomika med držali za rampo, ko se ne uporablja, se pomika navznoter pred čelno steno * Zadnji nosilci, priviti ----Varovanje tovor: * Zunanji okvir z luknjami, upognjen pod kotom približno 45 stopinj, z nosilnostjo 2 t na vsakih 480 mm * Možnost vgradnje 3-tonskih pritrdilnih okov za pritrditev tovora na vsakih 600 mm * Na vogalih spredaj in zadaj po 1 pritrdilni element z nosilnostjo 6,3 t * Na čelni in zaključni nosilni konstrukciji različne luknje za pritrditev tovor z nosilnostjo 1,2 t ----Rampe: * Enodelne mehanske rampe s vzmetjo za uporabo s strani ene osebe, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * Nagib rampe zadaj približno 860 mm ----Pnevmatike: * Pnevmatike: 235/75R17.5 ----Medosna razdalja: * Medosna razdalja: 990 mm ----Barvanje: * Vroče pocinkano podvozje, vlečna palica, čelna stena, zadnja stena, zadnji nosilci in rampe * Barvanje stranskih pokrovov v RAL 9010, čista bela * Barvanje stranskih sten v barvnem odtenku RAL je možno, vendar s doplačilom ----Informacije: * Pridržujemo si pravico do sprememb in napak * Novo vozilo z garancijo proizvajalca ----Dobavni rok: * Na voljo za takojšnjo dostavo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 profil 30,0: * EBS-E (elektronski zavorni sistem) * RDÜ – sistem za nadzor tlaka v pnevmatikah * Naprava za sprostitev v primeru izredne potrebe za cilindrih vzmetne akumulacije * Bobnaste zavore * 3 x 11 ton BPW Eco osi * Zračno vzmetenje z dvigalom in sistemom za spuščanje * SmartBoard kot informacijsko orodje na prikolici s senzorji tlaka za prikaz tlaka in skupne obremenitve osi na posamezni skupini osi * Stranska zaščita pred trčenjem * Mehansko nastavljivi paketi opozorilnih plošč spredaj in zadaj * Sprednji, zaprt plastični blatnik in zadnji, ravno pocinkana jeklena zaščitna plošča, vsaka s ščitnikom proti brizganju * Pokrov (vroče pocinkan) za orodno omarico na platformi podvozja * Orodna omarica iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm (črna, prašno lakirana), na desni strani * 15-polni električni vtič * LED osvelitev 12 / 24 V * LED okrogla rotacijska luč (odstranljiva) zadaj * Stranske markerne luči s funkcijo smernikov * Vlečna palica z 40 mm vlečnim vtičnicam in nastavitvijo višine preko vzmetne palice in zapornice * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku preko EBS signala (brez namestitve na strani tovornjaka) * Gumijasta prevleka na zložljivih rampah ter na nagibu za dostop na levi in desni strani (približno 860 mm dolžine) * Gumijasta prevleka na vzdolžnih nosilcih od končnega do zaključnega nosilca * Trden leseni pod na površini za natovarjanje nizkopodvozne platforme * Stransko po 4 nosilcev z možnostjo hkrati pritrditi tovor z 2 tonami * Paket za pritrditev tovora (La-Si) sestavljen iz: 5 parov UVV pritrdilnih obročev, ki se lahko vrtijo in spuščajo, obremenljiv v vseh smereh in vgrajen v zunanji okvir – v vogalih 13,4 t, sicer 10 t Gujdpfx Aiotplv Nsasf * 6 parov mehanskih zložljivih podaljškov za 3 metre skupne širine (vendar ne na zadnjem nagibu) * Nosilci za deske pod površino za natovarjanje v vzdolžni smeri * Upornik valja pred končnim nosilcem, dvignjen s po 1 pritrdilno točko 6,4 t na vsaki strani * Hidravlične zložljive rampe (približno 4.650 x 720 mm) z hidravlično razširljivim končnim delom ter ventili za zadrževanje tovora * Hidravlični stranski pomik ramp * Hidravlična zadnja opora (enostopenjski cilinder) * Hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku nad 40 litrov do največ 140 litrov/min) * Hidravlični kontrolni blok, zaščiten pred brizganjem vode * Dvovodična hidravlika * Površina za natovarjanje nad vrtljivim nosilcem: približno 1.960 x 2.520 mm, * zadnja površina za natovarjanje: približno 6.500 x 2.520 mm (vključno z 860 mm nagibom za dostop) * Višina natovarjanja ob obremenitvi približno 890 mm +/- 20 mm zračno vzmetenje * Podvozje, vrtljivi nosilec, upornik valja, zložljive podaljške in rampe, vroče pocinkane. * Os, vrtljivi nosilec, vlečna palica, rezervoar za zrak itd., barvani v črni barvi. * Višina natovarjanja ob obremenitvi: približno 890 mm +/- 20 mm * Novo vozilo z garancijo proizvajalca * Pridržana možnost sprememb in napak * Dostava je možna približno od 45. tedna leta 2026.

Stanje: novo, največja dovoljena obremenitev: 15.970 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21,0: ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Sistem za izpust zavor v sili za cilindrične zavorne čeljusti * Bobnaste zavore ----Os: * 2 x 11 ton Gigant osi Guedpfx Aioq Dyu Ujajf ----Vzmetenje: * Zračno vzmetenje z dvižnim in spuščanjem ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica s 50 mm prirobnično vlečno palico in nastavljiva vlečna palica po višini ----Osvetlitev / električna napeljava: * 15-polni električni vtič * LED luči 12/24 V * Sistem za nadzor tlaka v pnevmatikah (TPMS) ----Splošni dodatni deli: * Sprednja opora Jost * Zunanje zložljive opore zadaj * Plastična orodjarna škatla, približno 750 x 350 x 300 mm, nameščena na desni strani * Stranska zaščita * Plastični stranski blatniki ----Površina za tovor: * Pred sprednjo steno in zadnjim naklonom, priprava za naknadno namestitev zaklepov za pritrditev 20-palčnih kontejnerjev * Izvedba 21 ton celotne mase z ojačanim okvirjem in ojačanimi osmi * Paket za ojačitev za prevoz vrtalne naprave na šasiji * 50 mm iglasto-lesena talna obloga v vkleščeni izvedbi * Pred sprednjo steno priprava za naknadno namestitev zaklepov za pritrditev * Vijična sprednja stena iz gladke pločevine * Razdeljene stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s sredinskim zložljivim mehanizmom * Jeklena zadnja stena, ki se lahko potisne med rampami - držalo, ko ni v uporabi, na notranji strani pred sprednjo steno * Vijične zadnje stranske letve ----Pritrditev tovora: * Odprt zunanji okvir, približno 45 stopinj upognjen, z 2 tonami vlečne sile na vsakih 480 mm * Možnost vgradnje 3 ton varnostnih zank na vsakih 600 mm * Profifix pritrdilna letva na vzdolžni osi, na sredini, za možnost pritrditve do LC 3000 daN * Na vogalih, spredaj in zadaj, po 1 x 10 ton pritrdilne točke * Paket Lasi z 2 x 8 ton pritrdilnih točk na vsaki strani, potopljenih v zunanji okvir, v sprednji in zadnji nosilec različne vrtine za možnost pritrditve 1,2 tone ----Rampe: * Enodelna mehanična rešetasta ramapa z vzmetnim mehanizmom za delovanje z eno osebo, približno 3.000 x 620 mm (možnost potiskanja skupaj do 20 mm) * Naklon spredaj, približno 860 mm, šasija ----Višina nakladanja: * prazna približno 940 mm * natovorjena približno 910 mm ----Medosje / pnevmatike: * 1.810 mm * Pnevmatike: 235/75R17.5 ----Barvanje: * Barvanje stranskih sten v RAL 9010, čista bela barva * Vlečna palica, sprednja stena, zadnja vrata, zložljive opore in rampe pocinkane * Os, vzmeti, zračni rezervoar in opora pobarvane v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja rezervirani ----Dobavni rok: * Na voljo takoj, Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 4.500 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, skupna širina: 2.500 mm, skupna višina: 3.000 mm, Leto izdelave: 1979,

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profil 30,0: * EBS-E (elektronski zavorni sistem) * RDÜ – sistem za nadzor tlaka v pnevmatikah * Naprava za hitro sprostitev zračnega zbiralnika * Bobnaste zavore * 3 x 11 ton BPW Eco osi * Zračna vzmetenje z dvigalno-spustno napravo * SmartBoard kot informacijsko orodje na prikolici z tipalniki za merjenje tlaka za prikaz skupne obremenitve osi na posamezni skupini osi * Stranska zaščita pred trčenjem * Mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * Sprednji, zaprt plastični blatnik in zadnji, ravno pocinkani jekleni odbijač, oba s ščitnikom proti brizganju * Pokrov (vroče pocinkano) za orodno omarico na platformi gosenic * Orodna omarica iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm (črna, prašno barvana), na desni strani * 15-polni električni vtič * LED-osvetlitev 12 / 24 V * LED-rotacijska luč (odstranljiva) zadaj * Stranske gabaritne luči s funkcijo smernikov * Vlečna priprava s 40 mm vtičnico in nastavitvijo višine prek vzmetne palice in zapornice * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek signala EBS (brez namestitve na strani tovornjaka) Godoq Dyvcspfx Aiaouf * Gumijasta obloga na zložljivih rampah in na rampi za nalaganje na levi in desni strani (približno 860 mm dolžine) * Gumijasta obloga na vzdolžnih nosilcih od čelnega do zadnjega nosilca * Trden leseni pod na nosilni površini nizkopedijske platforme * Na obeh straneh po 4 vtičnic za pritrditev z možnostjo hkrati pritrditi 2 toni * Paket La-Si, sestavljen iz: 5 parov pritrdilnih obročev UVV, vrtljivih in spuščajočih, obremenitev v vseh smereh in vgrajenih v zunanji okvir - v vogalih 13,4 tone, sicer 10 ton. * 6 parov mehanskih zložljivih podaljškov za 3 metre celotne širine (vendar ne na zadnji rampi) * Držalo za deske pod nosilno površino v vzdolžni smeri * Opora za valje pred čelnim nosilcem, dvignjena, z eno 6,4 tonsko pritrdilno vtičnico na vsaki strani * Hidravlične zložljive rampe (približno 4.650 x 720 mm) z hidravlično nastavljivim končnim delom in varnostnimi ventili za zadrževanje tovora * Hidravlični stranski premik ramp * Zadnja opora, hidravlična (enostopenjski cilinder) * Hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku, večji od 40 l/min, do največ 140 l/min) * Hidravlični nadzorni blok, zaščiten pred brizganjem vode * Dvojna hidravlična napeljava * Nosilna površina nad vrtljivim obročem: približno 1.960 x 2.520 mm, * zadnja nosilna površina: približno 6.500 x 2.520 mm (vključno z rampo za nalaganje 860 mm) * Višina nosilne površine pri obremenitvi približno 890 mm +/- 20 mm, zračna vzmetenje * Podvozje, vrtljiv obroč, opora za valje, zložljivi podaljški in rampe, vroče pocinkani. * Osi, vrtljiv obroč, vlečna priprava, zračni rezervoar, itd. prebarvani v črno barvo * Višina nosilne površine pri obremenitvi: približno 890 mm +/- 20 mm * Novo vozilo z garancijo proizvajalca * Pridržane pravice do sprememb in prodaje * dostava je možna od približno 45. kalendarskega tedna 2026.

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Gusdpfol Thyqex Aiaef * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost support winch at the front * 2 x external drop-down supports at the rear * Closed single plastic mudguards * Folding A-board at the rear * Plastic underride guard buffer * Hot-dip galvanized approach protection with integrated chain storage box, W = 370 mm x D = 420 mm x H = 480 mm, at the front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Trough Stops: * 2 removable trough stops for lateral centering of the troughs * Front trough stops pluggable in 4 positions with swivel-mounted stop ----Painting: * Hot-dip galvanized chassis * Axles, springs, air tanks and support winch painted in black ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange drawbar eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tire pressure monitoring system ----General equipment: * Jost landing gear at front * 2 x external drop-down support legs at rear * Enclosed single plastic mudguards * Foldable A-board at rear * Plastic underride protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box, W= 370 mm x D= 420 mm x H= 480 mm, front left & right ----Load securing: * 2 x 5.3 t UVV lashing rings each side for attaching tensioning elements * Includes 2 ratchet tensioners permanently mounted to the outer frame with chain box * Equalizer chain both sides with eyelet and quick shortening hook, Y-special version 6.3 t ----Container stops: * 2 removable container stops for lateral centering of containers * Container stops at front, pluggable in 4 positions, with pivoting stop ----Paintwork: Godpfx Aiepk Dyxsaouf * Hot-dip galvanized chassis * Axles, springs, air tanks and landing gear painted in a shade of black ----Information: * Tension force with load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in Godpfjq Euaksx Aiasuf * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) Guedpfx Aepk D D Hjiaef * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Zavore: * Zavorna sistema EBS * Naprava za izpust zavor v primeru izrednih razmer za cilindr z vzmetjo * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolične vzmeti z izravnalnim mehanizmom ----Vlečna priprava / priključna plošča: * Vlečna priprava, nastavljiva po višini za 300 mm * 40-milimetrska priključna plošča ----Splošni dodatni deli: * Sprednja opora Jost * Zunanje, vroče pocinkane, zložljive opore zadaj Gusdpfxoq Ra D Eo Aiaef * Plastični blatniki * Plastična orodjarna škatla spredaj desno na čelni steni ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED-osvetlitev ----Nosilna površina: * Nosilna površina 6,27 m * Primerna za transport kontejnerjev * 50-milimetrski pod iz iglastih plošč * Pred čelno steno je nameščen priključek za poznejšo montažo zaklepov za kontejnerje * Vijolična čelna stena iz gladkih pločevin * Stranske stene iz jeklenih pločevin, trapezno profilirane, z možnostjo zlaganja z vzmetmi za podpiranje * Jeklena zadnja stena, ki se lahko potisne med držala za nakladalno ploščad, ko ni v uporabi, je nameščena notri pred čelno steno * Zadnji nosilci, vijeni ----Pripomočki za pritrditev tovora: * Zunanji okvir z luknjami, oblikovan pod kotom približno 45 stopinj, s silo vlečenja 2 t na vsakih 480 mm * Možna je vgradnja 3-tonskih kljuke za pritrditev tovora na vsakih 600 mm * V kotih spredaj in zadaj po 1 x 6,3-tonska kljuka za pritrditev tovora * Na čelni in končni nosilni nosilci različne luknje za pritrditev tovora s silo 1,2 t ----Nakladalne rampe: * Enodelne, mehanične nakladalne rampe z vzmetmi za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * Nakladalni nagib zadaj približno 860 mm ----Pnevmatike: * Pnevmatike: 235/75R17.5 ----Medosna razdalja: * Medosna razdalja: 990 mm ----Barvanje: * Vroče pocinkano podvozje, vlečna priprava, čelna stena, zadnja stena, zadnji nosilci in nakladalne rampe * Barvanje stranskih sten v barvi RAL 9010, čista bela * Barvanje stranskih sten v drugi barvi RAL je mogoče, vendar za doplačilo ----Informacije: * Pridržujemo si pravico do sprememb in napak * Novo vozilo z garancijo proizvajalca ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Braking system: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem compensation unit ----Drawbar / Flange drawbar eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system ----General fittings: * Jost landing gear at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter mudguards Gujdpfx Aiel Th Hwjaef ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Drop sides made of trapezoidal profile steel sheeting, foldable with tailboard spring assist * Steel rear wall insertable between ramps - holder for storage when not in use in front of headboard * Bolted rear stakes ----Load securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * One 10 t lashing ring in each front and rear corner, various drill holes in the front and rear cross-members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis centre for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, headboard, rear wall, loading ramps, and folding supports hot-dip galvanized * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL colour available at extra cost * Axles, springs, air tanks, flange drawbar eyes and landing gear painted in a shade of black ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf on the A7

Stanje: rabljeno, lastna masa: 3.000 kg, največja dovoljena obremenitev: 15.000 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2007, vzmetenje: zrak, velikost pnevmatike: 385/55R22.5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden Superstructure: 2-axle hook-lift trailer for containers up to 7 m, 2x 9 t BPW axles, drum brakes, 2x pneumatic locking mechanisms. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Gusdji Rq Sdopfx Aiaof

Stanje: rabljeno, največja dovoljena obremenitev: 5.900 kg, skupna masa: 9.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2020, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 5 m³, Oprema: ABS, * ABS * 5-komorna zadnja svetla * Podesivi vučni uređaj po visini Gjdeyncyhjpfx Aiaeuf * Gigant osovine * Prednji oslonac na navijanje ----Nadgradnja: Niskopodni prikolica, približna visina utovara 870 mm, zadnji deo zakošen, visina uspona približno 780 mm, opružno rasterećene čelične stranice levo i desno, drveno dno, prstenovi i ušice za vezivanje. Opružno rasterećene i bočno pomične rampe za uspon sa vatrootpornim i protivkliznim rešetkastim prečkama od pocinkovanog čelika (dužina cca 2.600 mm), automatska zadnja podrška povezana s upravljanjem rampama, plastična kutija za alat ispred prednjeg zida. Šasija/prednji zid/vučno vratilo/zadnji zid/rampe i stubići pocinkovani. Prodaja isključivo pravnim licima. KOD IZVOZA SE PLAĆA SAMO CENA BEZ PDV-A!!!!! SVE INFORMACIJE BEZ GARANCIJE, POSEBNO OPREMA I DODACI. Osnov za sve kupoprodajne ugovore, fakture, profakture, narudžbine i prodajne razgovore su naši Opšti uslovi poslovanja (vidi Impressum).

Stanje: rabljeno, največja dovoljena obremenitev: 17.290 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS * 5-komorni zadnje luči Gujdpfeyulu Uox Aiajf * Oranžna rotacijska luč * Duomatik zračni priključek * BPW-ECO osi ----Nadgradnja: nizkopodni priklopnik, pocinkan okvir (1900+7000mm)/nakladalna višina pribl. 900 mm, zadaj poševno znižano/pristopna višina pribl. 770 mm, jeklena/lesena tla, razširljiv na 3 m, hidravlične nakladalne rampe (pocinkane) s protidrsno prevleko, prav tako hidravlično pomične v stran, vpenjalni obroči Prodaja samo pravnim osebam. PRI IZVOZU JE PLAČILO MOŽNO LE NETO ZNESEK!!!!! VSE INFORMACIJE BREZ GARANCIJE VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji poslovanja (glejte impressum).

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026 Gjdpfx Aovin Ucoiaouf

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall Gusdpfx Aovin T Sjiaof * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026