Müller-Mitteltal Ka-Ta-R 11,9 Rampen 3-S Kipper Verzinkt nakup rabljenega (68.363)

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.000 mm, skupna višina: 40.000 mm, Leto izdelave: 2014, Oprema: ABS, Za vprašanja v zvezi z vozilom je vam na voljo gospod Seidel (po telefonu). Dsdoyfu Sdopfx Al Heut MÜLLER MITTELTAL SF32BM/BT betonska polprikolica Nadgradnja: Liebherr HTM 1004 10m³, osi BPW, bobnaste zavore, vzmetni akumulator, Wabco ABS, 1. os dvižna, zračno vzmetenje, dovoljena skupna masa: 32.000 kg, lastna masa: 6.510 kg, nosilnost: 25.490 kg, profil pnevmatik: 1. os 14-15mm, 2. os 10mm Po želji vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel vas z veseljem vodi po telefonu. Več informacij najdete na naši spletni strani. ... Napake, spremembe in vmesna prodaja pridržane!!! = Dodatne informacije = Dovoljena skupna masa: 32.000 kg Za dodatne informacije se obrnite na gospoda Tobiasa Eberta.

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring system with display option in the truck via EBS signal—no installation required on the truck side * 15-pin power connector * LED lighting * Front support winch * Rear external fold-out supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the front wall * Side underrun protection * Plastic quarter mudguards Djdol Th Dfepfx Al Hsut * 50 mm softwood flooring * Provisions in front of the front wall and at the rear for retrofitting 20" container locks * Bolted front wall made from flat sheet * Trapezoidal-profile, drop-down steel side walls, centrally divided once * Sliding steel rear wall between the ramps, mounting bracket for storage inside in front of the front wall when not in use * Bolted rear post/stake * Perforated external frame, bent at approx. 45 degrees, with 2-ton lashing capacity every 480 mm * Installation of 3-ton folding lashing brackets possible every 600 mm—4 lashing rings installed on each side * 1 x 6.3-ton lashing ring at each of the front and rear corners * "Profifix" lashing rail centrally in the longitudinal axis for lashing options up to LC 3,000 daN * Various boreholes in the front and rear cross member for 1.2-ton lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach ramp approx. 860 mm * Chassis, drawbar, front wall, tailgate, fold-out supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and support winch painted black * Side wall paintwork in an RAL color of your choice (excluding special or metallic paints), color can be changed up to approx. 6 weeks before completion * --Reinforced and certified body according to EN 12642 XL, incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering device Duedpfx Asl Thvxol Het * Tow bar height-adjustable by approx. 300 mm * Tow bar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * 15-pin electrical connector * LED lighting * Front landing gear * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right exterior bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions for subsequent installation of 20" container locks in front of the bulkhead and at rear * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profile steel sheet, center-folding, divided once * Rear steel panel insertable between ramp mounts; storage inside at bulkhead when not in use * Bolted rear stanchions * Perforated outer frame approx. 45° angled, lashing points (2 t lashing capacity) every 480 mm * Optional installation of 3 t drop lashing brackets every 600 mm – four lashing rings installed per side * One 6.3 t lashing ring in each front and rear corner * Profifix lashing rail along the longitudinal axis center, for lashing capacity up to LC 3000 daN * Various holes in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear driving slope approx. 860 mm * Chassis, tow bar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, drawbar eye, and landing gear painted black * Side wall paint in desired RAL color shade (no special or metallic finishes), modifiable up to about 6 weeks before completion * -- Reinforced and certified bodywork according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 31/2026

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: * RDÜ (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Tow bar with 40 mm bolted towing eye (height-adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Enclosed side underrun protection usable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the support arm ends and a central claw lock for securing the cable drum structure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft 76 mm diameter with centering and rotatable ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic pump unit with diesel engine Dedpfx Alsu I Iqxs Hsut * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Corrosion protection: hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: * TPMS tire pressure monitoring system * EBS brake system * Drum brakes * BPW axles * Parabolic springs * Support winch at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for variable support heights * Drawbar with 40 mm screwed towing eye (height adjustable, mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed side underride guard usable as advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm Dodju I Iqlspfx Al Hjut * Swiveling cable drum frame, clear width between drum arms 1,700 mm - with clamp lock for securing the drum at the support arm ends and a central claw lock for securing the cable drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotatable ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic power unit with diesel engine * Fuel tank and hand starter * 6.5 hp with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System (TPMS) * EBS brake system * Drum brakes * BPW axle * Parabolic springs * Support winch at front * Spring-assisted square tube supports at rear with baseplate and safety lock pins for various support heights * Drawbar with 40 mm bolt-type towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivelling cable drum rack, clear width between drum arms 1,700 mm, with clamp lock for securing the drum at the support arm ends and locking the cable drum rack to the chassis via a centrally located claw lock * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped Djdpfx Asu I Iqrel Hout * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes * BPW axle * Parabolic springs * Front support winch * Rear spring-assisted square tube supports with base plate and safety locking pins for various support heights * Drawbar with 40 mm screw towing eye (height adjustable) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tube and cross beams * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swivel cable drum superstructure, clear width between drum arms 1,700 mm – with tension latch for drum securing at the arm ends and a central claw lock securing the superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of stepped centering cones made of polyamide * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted Duodpfx Aou I Iq Eol Het * Immediately available ex Egestorf * Sample pictures

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: * RDÜ tire pressure monitoring system * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front Dodpfx Aou I Iqfsl Hjut * Spring-assisted square tube supports at the rear with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm bolted towing eye (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Enclosed steel fenders with splash guards * Enclosed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension latch to secure drum at the ends of the support arms and central claw lock securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum axle, 76 mm diameter, with centering and rotating ends * 1 pair of centering cones made of polyamide, stepped design * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 hp with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brake * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable ___ mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed lateral underride guard usable as advertising space * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum structure; inner width between drum arms 1,700 mm, with clamp lock for drum securing at the ends of the carrier arms, plus central claw locking device for securing the cable drum structure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepwise profiled * Hydraulic supply and return lines * Steel construction and hydraulics prepared for retrofit of a separate engine * 315/80 R 22.5 tires Dsdpfxoxyniwe Al Hsut * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power socket * LED tail lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear (front) * 2 x rear externally mounted drop-down supports * Enclosed single plastic mudguards * Folding "A" sign at the rear * Plastic underride guard buffers * Hot-dip galvanized protective underrun bar with integrated chain storage box, dimensions: W=370 mm x D=420 mm x H=480 mm, front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners on the outer frame with chain box * Equalizing chain on both sides with eye and quick shortener, Y-special version, 6.3 t ----Skip Stops: * 2 interchangeable skip stops for lateral centering of skips * Front skip stops with swing-mounted stop, plug-in at 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black Dodpfx Aopk Dyxsl Heut ----Information: * Lashing force with load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED rear lights Dusdol Thyqepfx Al Het * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external drop supports at the rear * Closed plastic single mudguards * Folding "A" plate at the rear * Plastic underrun protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Skip Stops: * 2 removable skip stops for sideways centering of skips * Front skip stops with swiveling stop, pluggable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Duedon Aw Hkjpfx Al Hjt Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: rabljeno, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, skupna dolžina: 7.500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2012, Uporabni material: Beton Lastna masa: 6.530 kg Dodpsx Utq Ssfx Al Hout Nosilnost: 25.470 kg Skupna dovoljena masa (zGG): 32.000 kg

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: bela, skupna masa: 32.000 kg, lastna masa: 6.600 kg, največja dovoljena obremenitev: 25.400 kg, velikost pnevmatike: 425/65R22,5, prva registracija: 03/2016, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Location of vehicle: Bovenden, 2 axles, BPW axles, air suspension, liftable first axle, ABS (anti-lock braking system), underrun protection, landing legs Superstructure: Liebherr concrete mixer type HTM 1004 approx. 10m³, 2x 10t BPW axles! Suitable hydraulics for engine PTO on the tractor unit available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale, and errors! Dedpfx Asi Rk Axsl Hsut

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform Dodpfx Aloq Dyv Io Hout * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform Dedpjtplwfsfx Al Heut * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 19/2026

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic suspension with tandem balancing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * Tyre pressure monitoring with in-cab display via EBS signal (no additional truck-side installation required) * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, right-hand side * Bolt-on underride guard * Plastic quarter mudguards ----Chassis: * Main frame made of high-tensile fine-grained steel ----Tipper Body: * Mesh hooks on the sides and rear in the central locking mounts, plus 2 hooks on the front wall * Steel pallet 2-way tipper body, fixed headboard made of smooth sheet metal, continuous side walls – drop-down without central stanchions, sideboard spring assists and swinging function via manual central locking * Rear stanchions bolted * Steel rear wall inserted in front of ramps * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side, recessed into outer frame * 4 mm floor made of high-tensile fine-grained steel ----Ramps: * Two-piece mechanical grid ramps with aluminium tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underride guard, mechanical props, and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Sideboards and body finished in RAL 9010 pure white * Optional body and side wall painting in other RAL shades at extra cost ----Information: * Brand new vehicle with manufacturer’s warranty Duedpfetr Sucex Al Hot * Subject to errors and prior sale ----Delivery Time: * Available from CW 07/2026

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Type Towing Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of fine-grain steel ----Tipper Platform: * Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall * Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm floor made of fine-grain steel Djdpotr St Uofx Al Hsut ----Ramps: * Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tanks, towing eye, and landing gear painted in black * Sidewalls and platform in RAL 9010 pure white * Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from calendar week 07/2026

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system Dodpsmi Tmaofx Al Hsut * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped version * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted front bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the middle * Steel rear wall, insertable between the ramps; stowage fixture in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t drop lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, 2 x 8 t retractable UVV lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flanged towing eye, and support winch painted in black--- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: Dusdpfx Aljmi Tcqo Hst * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber rear lights * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor, clamped version * Fixture in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made from smooth steel sheet * Split steel sidewalls - trapezoidal profile - foldable with central folding stake * Steel rear wall, slidable between ramps - interior mounting bracket for storage when not in use, in front of the bulkhead * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Possible to install 3 t folding lashing brackets every 600 mm * Load securing package: at each front and rear corner 1 x 10 t UVV-rated lashing ring, on each side 2 x 8 t UVV-rated retractable lashing rings in outer frame, various holes in front and rear crossmembers for 1.2 t lashing options * One-piece sliding ramps 12 t/pair, approx. 2,750 x 620 mm * Rear drive-on bevel approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and drive-on ramps hot-dip galvanized * ---Axles, air reservoirs, flange towing eye, and landing gear painted black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 25.230 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, Oprema: ABS, Müller Mitteltal 2-axle concrete semi-trailer, model SF32 BM/BT, superstructure type: HTM 1004 Liebherr, 10 m³, year of manufacture 2012; BPW axles, drum brakes, air suspension, lift axle, underrun protection, EBS, ABS. Single ownership Inspection book available Permissible total weight: 32,000 kg Dedpfx Aordt H Eol Heut Unladen weight: 6,770 kg

Stanje: rabljeno, lastna masa: 3.680 kg, največja dovoljena obremenitev: 10.720 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2021, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19,5 156J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 156J, velikost zadnje pnevmatike: 385/55R19,5 156J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, KOT NOVO, široke pnevmatike, kiper ploščad CINKANA, 12 pritrdilnih obročev, stranske stene 600 mm, doplačilo za rampe 1.000 €, -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, vzorčne slike --, Več podatkov na zahtevo! Djdoy N Rwfepfx Al Heut

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Dedpfx Aley Izwyj Heut

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Dujdpfx Aljy Izvvj Hot

Stanje: rabljeno, lastna masa: 6.200 kg, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2006, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Duodsy Hh Icspfx Al Hot