Fliegl Dhks 390 25M³ Stahl-Mulde 3-Achs Hinterki nakup rabljenega (40.845)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801012811, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, multiple units available Chassis fifth wheel forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced frame for vehicle loading, outer frame with "Load-Lock profile" every approx. 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on top/outside of the outer frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminum side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, 1 spare wheel holder for 1 single wheel, incl. wheel mounting kit, 2 lockable plastic toolboxes, w=600 / h=425 / d=460 mm, container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, front-most position is a recessed fold-down lock, 10 pairs of stanchion pockets recessed in the outer frame, 70 x 40 mm internal dimension, 10 stanchion pockets recessed centrally in the floor, 70 x 40 mm internal dimension, 2 cross tie-down/stanchion rails recessed into the floor spanning the full width to the outer frame (approx. max usable interior width between external stake pockets 2170 mm), about 100 mm high. Includes 20 mm round steel rails at top and bottom, spacing about 60 mm (between rails); bottom end with angled sheet as closure, open downwards halfway. For lashing and inserting stakes up to 80 x 80 mm. Arrangement: Positions 2 and 4 according to Fliegl data sheet, 20 removable stakes, hot-dip galvanized, storage space for aluminium drive-on ramps, ramps can be inserted from the rear, 3 pairs of fold-down lashing points (10 t) in outer frame (1x in front of front wall and 2x at the rear) Fjdpfx Aeza Agronujgf Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, includes forced lowering and start assist, actuated by "brake 3x", axle lift below recommended driving height, therefore no warranty for tire damage Brake system: 2-line compressed air brake system, color-coded routing for easy service, spring-type parking brake, 2 fail-safe coupling heads at front, no connecting line, EBS, electronic braking system with EBS socket at front, no connection cable, with raise & lower valve, 2 driving heights adjustable via manual knob: 1x for coupling height 980 mm, 1x for coupling height 1100 mm, ride height in combination with lift axle; when lift axle is raised, load/overall height increases by 50 mm, vehicle stability control system Wheels and tires: 435/50 R19.5, brand at manufacturer's discretion, steel rims Electrics: 24V, multi-chamber lights, yellow LED side lighting, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights: 1x each left/right in front frame, 2 additional LED work lights at rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning panels: LED-illuminated and extendable to 4,000 mm, additional 7-pin socket at rear underrun protection Floor: phenolic plywood, approx. 30 mm thick, on longitudinal beams for high point loading, suitable for forklift axle load up to max. 7,100 kg Front wall / corner stanchions: 25 mm aluminum hollow section, 1,350 mm high, steel corner stanchions in volume version, front wall inside also lined with 1,250 mm phenolic plywood, "Crash-Blocker", lower 140 mm inside with steel impact protection, storage compartment for insertable stanchions insi

Stanje: novo, največja dovoljena obremenitev: 16.920 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 24.000kg/ 30.000kg Lastna teža: 7.080kg Nosilnost: 16.920kg/ 22.920kg Skupna dolžina: 10.825mm Fgjdpfezhhw Dsx Anuef Nakladalna dolžina: skupno 8.200mm Širina: 2.5250mm Višina nakladalne površine: 900mm Dodatne informacije plus predhodni prevoz / priprava iz skladišča Wiesmoor 26639, 1.280,00 € / neto Podvozje nizkopodni priklopnik Jeklena varjena konstrukcija Vrtljiva plošča s trdnim krogličnim ležajem, omarica za orodje vgrajena v prednji del vrtljive plošče Zložljive zadnje podporne noge 2 zagozdi za kolesa z nosilcem Bočna zaščita iz aluminija Zadnja blatnika po celotni širini (ni združljivo z nosilcem za viličar) Četrtinski blatniki pred in za 1. osjo z zaščito proti pršenju, zaščita proti pršenju za 2. in 3. osjo 1 nosilec za rezervno kolo z pritrdilnim kompletom 1 plastična škatla za orodje, širina=600 / višina=425 / globina=460 mm, zaklepna Razširitve izvlečne do 3.000 mm (ne na zadnji poševnini) (sled širine transportiranih gradbenih strojev ali vozil ne sme presegati zunanjega okvirja 2.550 mm) Shranjevalni prostor za lesene deske na sredini nakladalne površine Lesene deske 70 mm za razširitev na 3.000 mm Pritrdilne točke za nizkopodnik 3 para pritrdilnih točk po 10 t vgrajenih spredaj v tla 6 parov pritrdilnih gobic zgoraj in ob strani zunanjega okvirja po 10 t 1x v predelu vrata ostale enakomerno porazdeljene vmes 1x na zadnji poševnini 5 parov pritrdilnih obročkov v zunanjega okvirju po 5 t (možnost predelave v žepke za kole) 1 par zložljivih pritrdilnih točk dodatno v nizkopodni površini za 3. osjo po 10 t 1 par vijačnih pritrdilnih točk spredaj v kotih po 6,7 t, z veliko pritrdilno ploščo, vključno z navojem kot nasprotnik Vlečna naprava priklopnika z vrtljivo ploščo Vlečna roka s preizkušenim 40 mm vlečnim obročem Preme in vzmetenje Bobnaste premne, izbira proizvajalca "Premne/podvozje lasersko izmerjene" zmanjšujejo obrabo pnevmatik in porabo goriva Zračno vzmetenje s funkcijo dviganja/spuščanja Zavorni sistem Dvovodna zračna zavora Barvno označene cevi za enostavno servisiranje Zavorni zasilni zavorni mehanizem 2 nezamenljivi spojni glavi spredaj z povezovalnimi cevmi do vlečnega vozila 24V EBS, elektronski zavorni sistem z EBS vtikačem spredaj, s povezovalnim kablom Pozor: Priklopno vozilo sme vleči samo vozilo, ki omogoča učinkovitost ABS! Prepoznavanje osi preko EBS-Canbus signala, za prikaz na zaslonu v kabini voznika, tovornjak mora biti prilagojen, ni nameščen (ni overjene tehtnice) Sistem stabilnosti vozila "RDKS" sistem za nadzor tlaka v pnevmatikah po ECE R 141, prikaz na zaslonu v vlečnem vozilu, preko EBS, ni nameščen v tovornjaku (pogoj je izpolnjen v osnovnih pnevmatikah) Kolesa in pnevmatike 235 / 75 R 17,5" Pnevmatike po izbiri proizvajalca Jekleni platišči v dvojni postavitvi, tovarniško srebrna barva Elektrika 24V, večkomorni žarometi, bočna rumena LED osvetlitev Bočna rumena LED osvetlitev povezana s smerniki "utripajoče stranske luči" 2 bele pozicijske luči spredaj 2 belo/rdeči označevalni luči zadaj 2x 7-polna nezamenljiva vtikača spredaj, s povezovalnim kablom 1 LED opozorilna luč z nosilcem, vklop preko pozicijske luči (svetilka snemljiva) 2 para opozorilnih tabel, dvojno LED osvetljene, izvlečljive do 3.000mm Tla Sprednji del jeklena tla nato cca. 70 mm mehkih lesenih desk, na območju koles jekleni/ribasta plošča Zadnja poševnina s 70 mm mehkim lesom Nizkopodna površina z zadnjo poševnino 8.200 mm Nakladalne rampe Jeklene rampe dolžine 3.000 mm, širine 750 mm, premakljive bočno (nadaljevanje spodaj)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.100 kg, največja dovoljena obremenitev: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, dolžina tovornega prostora: 7.350 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.550 mm, prostornina tovornega prostora: 24 m³, skupna dolžina: 7.350 mm, skupna širina: 2.533 mm, skupna višina: 3.164 mm, vzmetenje: zrak, velikost pnevmatike: Dunlop SP247 385/65 R22.5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.310 mm, barva: sivo-črna, Leto izdelave: 2026, Oprema: ABS, New vehicle – 3-axle tipping semi-trailer – Steelpipe 24 m³ with internal tailgate and 5 mm HARDOX 450 – Available immediately Robust 3-axle tipping semi-trailer with highly wear-resistant HARDOX 450 steel body, 24 m³ capacity, designed for demanding construction and bulk material applications. Ready for immediate delivery and operation. The vehicle can be inspected and collected at any time in 07368 Eliasbrunn. Technical specifications Body: • Internal dimensions: approx. 7,400 x 2,550 x 1,550 mm (L x W x H) • Volume: approx. 24 m³ • Material: HARDOX 450, floor 5 mm & sidewalls 4 mm • Body color: RAL 7024 Graphite Grey • Tailgate: Internal rear tailgate • Unladen weight: approx. 6,100 kg Chassis & Axles: • Frame: Straight version, material MC700 • SAF Intra-CD axles with Ø 430 mm disc brakes / ET 120 • 1st axle with automatic lift function • Chassis painted black RAL 9005 • Pneumatic suspension with constant height • SAF steel landing legs • Frame height: kingpin height 1,200 mm • Axle load: 9,000 kg Tyres & Rims: • 6x Dunlop SP247 385/65 R22.5 • Steel rims Hydraulics: • HYVA Short Cover high-pressure front cylinder (250 bar) • Hydraulic hose with quick coupler • Automatic lowering with switch on the frame Braking system: • KNORR ABS/EBS system according to UN/ECE R12.11 • Dual-circuit braking system, ADR-compliant • Automatic braking force regulation Electrics & Lighting: • Aspöck Europoint III lighting, 24V • LED side marker lights • 1 white LED work light at rear • 2x 7-pin and 1x 15-pin sockets Accessories & Equipment: Fgedpfx Ansy Uftxsusf • PVC sliding cover 900 g/m², black • Quick-release tarp fastener • Platform with ladder (access from both sides) • Water tank • Side-mounted toolbox • 2 wheel chocks • Warning triangle, wheel wrench, pressure gauge Availability: • Immediately available – Inspection daily in 07368 Eliasbrunn possible • Delivery ex works 07368 Eliasbrunn

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.000 kg, največja dovoljena obremenitev: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, dolžina tovornega prostora: 7.350 mm, širina tovornega prostora: 2.335 mm, višina nakladalnega prostora: 1.570 mm, prostornina tovornega prostora: 24 m³, skupna dolžina: 8.953 mm, skupna širina: 2.533 mm, skupna višina: 3.164 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.310 mm, barva: srebrn, Leto izdelave: 2026, Oprema: ABS, NEW – 3-Axle Tipper Semi-Trailer – Steelpipe 24 m³ HARDOX 450 with Internal Rear Flap Immediately available -- Brand new vehicle Robust 3-axle tipper semi-trailer featuring an ultra-wear-resistant HARDOX 450 body (24 m³), engineered for demanding construction and bulk material applications. Immediately available and ready for use; the vehicle can be inspected and collected at any time in 07368 Eliasbrunn. Technical Data Body: • Internal dimensions: approx. 7,350 x 2,335 x 1,570 mm (L x W x H) • Body colour: White aluminium RAL 9006 • Volume: approx. 24 m³ • Material: HARDOX 450 (Floor 5mm thick & side walls 4mm thick) • Flap: Internal tailgate • Chassis: Straight design, material MC700, black RAL 9005 • Unladen weight: approx. 6,000 kg Chassis & Axles: • SAF Intra-CD axles with disc brakes Ø 430 mm / ET 120 • 1st axle with automatic lift function • Pneumatic suspension with constant ride height • SAF steel landing legs • Frame height: fifth wheel height 1,200 mm • Axle load: 9,000 kg Tyres & Rims: • 6x Bridgestone Duravis RT-2, 385/65 R22.5 • Alcoa Dura Bright Hydraulic System: • HYVA Short Cover high-pressure front cylinder (250 bar) • Hydraulic hose with quick coupling • Automatic lowering with switch on the chassis Brake System: • KNORR ABS/EBS system according to UN/ECE R12.11 • Dual-circuit brake system, ADR-compliant • Automatic braking force control Electrics & Lighting: • Aspöck Europoint III lighting, 24V • LED side marker lights • 1 white rear LED work light • 2x 7-pin and 1x 15-pin sockets Accessories & Equipment: • PVC tarpaulin 900g/m², silver, quick-release • Quick-release tarp system • Platform with ladder (access from both sides) • Reisch semi-trailer side skirt • Water tank Fgjdey Uftrjpfx Anuef • Side-mounted toolbox • 2 wheel chocks • Warning triangle, wheel wrench, pressure gauge Availability • Immediately available – Daily viewing possible in 07368 Eliasbrunn • Delivery ex works 07368 Eliasbrunn

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with 'Load-Lock profile' for lashing strap attachment 24 t, 2-speed landing gear, single-sided operation Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of and behind axle assembly With anti-spray mud flaps compliant with EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fixing kit Axles & Suspension: SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser alignment' reduces tire wear and fuel consumption 1st axle automatic lift axle, additionally electrically operable from the truck Includes forced lowering and start-up aid, no installation required on truck Brake System: 2-line compressed air braking system Spring-loaded parking brake EBS by Wabco, electronic braking system with EBS socket at the front, without connection cable With raise & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN bus signal, display via monitor Wheels and Tires: 385/65 R22.5" / 6 steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side LED marker lights (amber) 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connection cable 2 additional LED work lights at the rear, controlled via reverse light Floor: Approximately 30 mm thick phenolic plywood, mounted on continuous longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg at the bulkhead Drop-in Slats: Fedpfxsri Hihs Anuegf 5 rows of aluminum V-insert slats 2 pairs of Vario steel slats, in conjunction with Vario beams for fore and aft load securing (then no insert slats required in the area of the steel slats) Rear Portal Doors: Double-winged, each with 2 internal lock rods. Tarp with welded horizontal and vertical belts Unladen weight: 5,960 kg Offer and pictures non-binding

Stanje: rabljeno, številka stroja/vozila: WFDFLT33901007921, lastna masa: 9.000 kg, največja dovoljena obremenitev: 26.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 15.150 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: črn, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/Technical Gross Weight: 35,000 / 39,000 kg Permissible/Technical Payload approx.: 26,000 / 30,000 kg Permissible/Technical Axle Load: 24,000 / 27,000 kg Permissible/Technical Kingpin Load: 11,000 / 12,000 kg Unladen Weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Overall width max.: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Low bed length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height (low bed) approx.: 900 mm Fifth wheel height approx.: 1,150 mm Kingpin mounting dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis | Fifth-Wheel Platform Haulage Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed into outer frame, each rated at 2.5 t 24 t, 2-speed landing gear, single-sided operation, with straight lower section, no lateral compensation Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear collision guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box, front bulkhead mounted Telescoping Central tube frame made of cleanly welded, interlocking telescopic frame sections. Extendable by max. 1,500 mm and lockable after approx. 1,500 mm, outer frame sections approx. 1,500 mm long for insertion into the outer frame when extended Locking by mechanical pin locking Axles & Suspension SAF drum brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 error-proof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Wheels & Tires 235 / 75 R 17.5 Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber rear lights, lateral LED marker lights (yellow) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin error-proof sockets at the front, without connection cable Rotating beacon with holder, controlled via parking light (lamp removable) Fgodpfx Anjy Slp Ioujf Floor Non-slip phenolic plywood panels approx. 30 mm thick, for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Where required in wheel arch areas: steel/chequer plate covering Bulkhead/Front Stakes 25 mm aluminium hollow section, 1,950 mm high, steel front stakes, full height in heavy duty design Certification / Signage With Dekra inspection and appraisal Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, lateral white and rear red Attention, the images shown are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000364, lastna masa: 6.120 kg, največja dovoljena obremenitev: 28.880 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- build tolerance Overall length approx.: 13,800 mm Max. overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loading height in low-bed, loaded approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis semi-trailer for haulage company Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping at the beginning of the low-bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly sloped new outer frame design with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for attaching lashing straps, mounted on the crossmember underneath the outer frame 24 t two-speed landing gear, single-sided operation, with straight lower section, without load equalizer Free landing leg corner dimension or free rear swiveling radius of approx. 1,920 mm Side underrun protection: aluminum Rear underrun protection: steel Quarter shell mudguards 9 pairs of lashing/ stanchion rails recessed across the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing between bars approx. 60 mm. Bottom with angle plate as closure, half open downwards. For securing and inserting stanchions 80 x 80 mm (3 pairs in gooseneck, 6 pairs in low-bed area) 3 pairs of stake pockets recessed in the outer frame, internal dimension approx. 72 x 42 mm Axles & Suspension: Drum brake axles as per manufacturer’s choice "Laser-measured axles/chassis" for reduced tire and fuel consumption Air suspension Brake system: 2-line compressed air braking system Color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS electronic braking system, EBS socket at front, no connecting cable Note: The trailer must only be towed by tractor units that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle stability system Wheels and Tires: 235/75 R17.5, manufacturer at the buyer’s discretion Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side lighting (recessed inward) 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets at the front, no connecting cable 1 additional LED work light at rear, switched via reverse light Floor: Approximately 30 mm thick anti-slip plywood, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / front corner stanchions: 25 mm aluminum hollow profile, 1,350 mm high Fjdpfxey Slhqs Anusgf Country of registration / plates: Germany Inspection and certificate in Bosnia 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red at the rear Warning sign according to ECE 70 Painting: Frame: hot-dip galvanized incl. passivation “15-year guarantee against corrosion perforation” Front corner pillars: hot-dip galvanized Front wa

Stanje: novo, največja dovoljena obremenitev: 27.520 kg, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Zavore: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Naprava za izpust v sili za vzmetne valje * Bobnaste zavore 420 x 180 mm * Končna zavora s skrajšanimi zadnjimi blatniki ter ročnim stikalom za zaključni stroj ----Os: * 2 x 9 t BPW ali SAF osi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim znižanjem med kipanjem (za povečanje stabilnosti, izklopljivo za stroj za asfaltiranje) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna vtičnica za priklop prikolice * Eco-LED II razsvetljava s zaščitno streho * 1 x dodatni LED delovni žaromet * utripajoče stranske označevalne luči ----Splošni sestavni deli: * Aluminijasti zračni rezervoar * Teleskopske jeklene podporne noge s krožnimi ploščami (možno snemanje le v praznem stanju) * 4 m aluminijaste stranske lestve, nameščene desno nad blatniki * zaprti posamezni blatniki iz plastike * zložljiva zaščita podvozja * vlečna kljuka zadaj * zložljiva dostopna lestev spredaj levo ob strani ----Okvir: * Šasija iz visoko trdnega finozrnatega jekla s prečnimi nosilci, specifičnimi za Meiller ----Nagibna korita: * Polokrogla jeklena zadnja nagibna korita iz jekla STEELECT 450 - HBW 450 * Prednja stena z 600 mm strešno nadgradnjo kot nosilec cerade * Stranske stene z močnim, obdanim, navznoter nagnjenim zgornjim robom * Prednja in zadnja stena - poševno postavljeni * Dokumentna škatla na prednji steni * Zadnji pokrov z gumijastim tesnilom in dvema dodatnima ročnima zapahoma ter avtomatskim 2-kavljastim zaklepom ----Debelina tal, stranskih sten, prednje in zadnje stene: * Talna plošča 5/6 mm * Prednja stena 4 mm * Stranske stene 4 mm * Zadnja stena 4 mm ----Hidravlični bat: * Sprednji hidravlični bat s srednjim delovnim tlakom ----Cerada: * električni pomični ponjavni sistem - RAL 9006 bela aluminij - z ročnim stikalom na šasiji in daljinskim upravljalnikom ----Prostornina natovarjanja: * približno 25 m³ ----Višina priklopa: Fgsdpfx Asw Eg Ekjnuef * prazno približno 1.250 mm * natovorjeno približno 1.220 mm ----Barvanje: * barvanje šasije v RAL 7021 črna siva * nagibna korita v RAL 9006 bela aluminij ----Splošne informacije: * Napake in vmesna prodaja so pridržane * novo vozilo z garancijo proizvajalca ----Dobavni rok: * dobavljivo od 37. tedna/2026

Stanje: rabljeno, številka stroja/vozila: WFDFLT33902030059, lastna masa: 7.452 kg, največja dovoljena obremenitev: 27.548 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 92 m³, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", barva: črn, The images are archive photos; the vehicle may still be in use! Weights and dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Specified fifth wheel load permissible / technical: 11,000 / 12,000 kg Unladen weight (standard version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Coupling height approx.: 1,130 mm Kingpin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis: Semi-trailer for freight forwarding High-tensile steel welded lightweight construction up to the support legs, fifth wheel plate with replaceable 2" kingpin Lashing ring preparation laterally in the floor (max. 13 pairs) 24 t 2-speed landing gear, one-sided operation, with straight lower section, no load equalizer Pull-out ladder at the rear Fjdpfx Aewk Dc Rsnujgf Door retainers on the sides Wheel chocks with holders Side underrun protection made of aluminum Steel underrun protection with wide Fliegl mud flaps Foldable fender for light unit Quarter shell mudguards Rear impact guard Axles & Suspension BPW disc brake axles Air suspension 1st axle is an automatic lifting axle with forced lowering and start-up aid, activated via triple brake application Brake system 2-line compressed air braking system Colored line routing for easier maintenance Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Flow rate: 110 l/min Pressure: 250 bar Oil reservoir minimum: 100 l SB Body Box-shaped aluminum body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow profiles, welded all-around with a large special reinforcement profile at the top, with a special subframe welded in at the bottom. Moving wall for improved unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made from aluminum hollow profiles, as two-leaf doors, split 1/2 to 1/2, all-around with special U-profile with stop and rubber gasket, fitted with 2 external rotary bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in driving direction. With pivoting transverse brace at the top. Standing platform with ladders on both sides (left/right in direction of travel) and railing for opening and closing the sliding roof tarp. Removable, swiveling cross bars for tarp support + tarp support at front bulkhead and rear wall. Sliding tarp can be rolled to one side with 2 longitudinal tensioning straps, 3 side ratchet straps. At the front bulkhead and above the rear doors, the tarp is secured with hooks and rubber

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Full-width rear spray flap (not compatible with forklift holder) Half-shell mudguards on 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axles Plastic toolbox Extendable width up to 3,000 mm Storage compartment for timber planks positioned centrally on the loading area 70 mm timber planks for widening to 3,000 mm Tie-down points for low-loader 1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts) 7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t 1 in front on the gooseneck, 6 in the low-bed Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets) Additional pairs of folding lashing points, each 10 t 1 on the gooseneck 1 recessed in the floor behind the last axle Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles and suspension Drum brake axles, manufacturer’s choice “Axle/chassis laser alignment” for reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer) Wheels and tires 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system Dual-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connector lines to the tractor unit 24 V ABS and ALB, with ABS plug at the front and connecting cable Electrics 24 V, multi-chamber lights, yellow LED side marker lights Fgjdpfx Aneuytx Seuef 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable LED beacon with holder, switched via parking light (removable beacon) Pair of double warning boards, LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/chequer plate decking Storage compartment recessed into the transition slope to the gooseneck Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking Rear bevel with 70 mm softwood floor Low bed area including rear bevel 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment) Wooden covering (tip area with steel/chequer plate) Hydraulic operation via tractor PTO with restrictor, operation on driver side left Hydraulic connection with SVK plug NW 10/3, incl. connection hose Paintwork Frame hot-dip galvanized including passivation Access ramps hot-dip galvanized plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Fodpfx Aev D T R Esnuegf Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Load length: total 8,670 mm; gooseneck section 2,170 mm; loading deck 6,500 mm Width: 2,520 mm Loading height: 860 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: 1,280.00 €/net Chassis Low-bed trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holder Aluminum side underrun protection Full-width rear spray flaps (not in conjunction with forklift holder) Quarter-shell mudguards in front of 1st axle Anti-spray flaps behind the 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable deck widenings to 3,000 mm (not in rear incline area) (Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading deck 70 mm timber planks for widening to 3,000 mm Tie-down points low-bed 1 pair of lashing recesses in the longitudinal beam at the front, integrated into gooseneck, each 10 t 4 pairs of lashing holes in outer frame of gooseneck, each 5 t (for attaching tension straps) 7 pairs of lashing mushrooms, integrated top and side in outer frame, each 10 t - 1 x front in gooseneck section - 6 x on lower deck First lashing eye 250 mm from front, last max. 250 mm from rear; maximum distance between lashing eyes 1,100 mm 5 pairs of ring lashing eyes, integrated into the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10 t - 1 x on gooseneck (overhanging) - 1 x in floor behind last axle Towing unit trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + suspension BPW drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancing) Wheels and tires 235 / 75 R 17.5" manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 error-proof coupling heads at the front with connecting lines to towing vehicle 24V ABS and ALB, with ABS socket at the front and connecting cable Attention: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front Fsdpfxewlmr Re Anuogf 2 white/red lane indicator lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (removable lamp) 2 pairs of warning boards, double-sided LED illuminated and extendable to 3,000 mm Floor Gooseneck front with steel/chequer plate covering Storage box recessed into drive-over slope of gooseneck Followed by approx. 70 mm softwood floor, steel/chequer plate covering at wheel arch area Rear slope with 70 mm softwood floor Low-bed area incl. rear slope: 6,500 mm Access ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety lock, foldable at bottom (prevents lateral slippage, not in conjunction with side hydraulic ramp adjustment) Wood surfaced (tip area with steel/chequer plate) With spring-assisted lifting Operating instructions With 10,000 kg axle load, a special permit is required, only

Stanje: rabljeno, prva registracija: 05/2015, skupna masa: 39.000 kg, lastna masa: 5.300 kg, barva: bela, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2015, največja dovoljena obremenitev: 33.700 kg, naslednji pregled (TÜV): 02/2027, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5 160J, velikost sprednje pnevmatike: 385/65 R22,5 160J, velikost zadnje pnevmatike: 385/65 R22,5 160J, voznikova kabina: drugo, največja hitrost: 90 km/h, Oprema: ABS, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, Schmitz SKI 24 SL 7.2, triosna različica, aluminijasta nadgradnja, nakladalni volumen 24 m³ * Aluminijasta nadgradnja * Prvo osno kolo je dvigljivo * ALCOA aluminijasta platišča * Schmitz osi * Platforma * Rollplane (pomična pregrada) * ABS, EBS, ALB, LSV, CDF * Kolutne zavore * Pnevmatike: 385/65 R22.5 * Teže: največja dovoljena masa – 39.000 kg, masa na osi – 5.300 kg, neto masa – 33.700 kg * Nemško vozilo z nemško dokumentacijo!! * Drugo vozilo v lasti * Datum prve registracije: 13.05.2015 * Veljavnost tehničnega pregleda do 02/2027 * Veljavnost varnostnega pregleda do 08/2027 * VIN: WSK000001285837 Pridržana pravica do vmesne prodaje, napak in sprememb! Na nekaterih slikah so bila podjetniška logotipa odstranjena – prosimo, povprašajte! Delovanje dodatne opreme ni zagotovljeno! Vaš kontakt: Fodpjzttgusfx Anuegf Tobias Karcher Tel. + WhatsApp:

Stanje: rabljeno, lastna masa: 5.950 kg, največja dovoljena obremenitev: 29.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 7.360 mm, širina tovornega prostora: 2.340 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: oranžna, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385 / 65 R 22,5, velikost zadnje pnevmatike: 385 / 65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: oranžna Dodatki v opremi ABS, zračna vzmetenje, vzmetenje: zračno dviganje, nosilnost (kg): 29050 Tip nadgradnje: jeklo - jeklena kesonska prikolica cca 25 m³, D x Š x V 7.360 x 2.340 x 1.500 mm, Hardox 450 - (5 mm dno / 4 mm bočne stene), BPW osi z zračnim vzmetenjem, 1. os dvižna, bobnaste zavore, aluminijasta platišča, platforma, rolo ponjava, elektrika 24 V - 15 + 2 x 7-polno, ABS, zračni priključek rdeč/rumen, podporne noge, lastna teža 5.950 kg Fodpey Igt Hjfx Anusgf

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 2.400 mm, prostornina tovornega prostora: 51 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, KEMPF SKM 36/3 SHL-Light – 3-Axle Steel Tipper, New Vehicle Fgedpfsxn Eckex Anujf Estimated delivery: February 2026 General Information: Type: SKM 36/3 SHL-Light - Design: 3-axle semi-trailer tipper with conical steel trough - Permissible gross weight: 36,000 kg - Axle load: 3 x 8,000 kg - Kingpin load: approx. 12,000 kg - Nominal fifth wheel height: 1,200 mm (technically 1,200–1,260 mm) - Loading length: approx. 9,000 mm - Loading width: front 2,280 mm / rear 2,330 mm - Trough height: approx. 2,400 mm - Trough volume: approx. 51.1 m³ - Total height: approx. 3,805 mm to the loading edge (loaded) Chassis: - KEMPF welded construction made of high-tensile steel, sandblasted - Conical offset design (offset approx. 80 mm) - All mounted parts hot-dip galvanized - Chassis color: Deep black (RAL 9005) - Trough color: White aluminum (RAL 9006) - Tarp color: Silver (Mehler 911) - Side (white) and rear (red) contour marking according to EU directive Axles, Tyres & Running Gear: - SAF INTRADISC plus Integral (off-road version) - Disc brakes Ø 430 mm - Running gear laser measured (optimized tire wear & consumption) - Axle lift axle (fully automatic, with forced lowering when unladen) - Air suspension with small 300-mm bellows and lift/lower function - Quick air release available - Load gauge with scale (tonnes), front left - Tires: 385/65 R 22.5 - Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety: - Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) - ABS 4S/2M with stoplight supply - Tire pressure monitoring according to ECE R141 (TPMS) - Trailer Info Module TIM G2 with brake wear indicator - Acoustic reversing warning - Foldable underrun guard (ECE R58.03) with spring-lift assistance - Removable tow coupling (right side) - Reflective plate (200 x 1,130 mm) Hydraulics: - Hyva front tipping cylinder (single-circuit hydraulic system, 190 bar) - Hard-chromed piston rod - Hydraulic connection: Edbro 1" screw coupling - Tractor unit pressure adjustable if required Body / Trough: - Conical steel trough (wider towards the rear) - Material: HARDOX steel (HB 450 / HB 500) - Floor: 5 mm HARDOX, continuous - Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges - Front wall: 20° inclined, 3.2 mm HARDOX steel - Rear wall: - Double-winged (1/3 left, 2/3 right) - Non-swinging, manual hook locking - Grain-tight with rubber seal - Slider 400 x 400 mm, manual lever operation - Rear wall approx. 40 mm lower (cover/tarp can be left open) - Pneumatic vibrators, switch operated at left rear - Catwalk with railing according to UVV, ladder on left, 2-step access - Interior access via steps on front wall - Shovel and broom holder on front wall Tarp & Bow System: - Roll tarp made of high-grade PVC (680 g/m²), color silver - 3 arched bows (1x fixed steel, 2x telescopic aluminum) - Crank operation on right, central locking on left - Tarp guard made of aluminum, swivel and fully enclosed - Accessories: stainless steel hooks/pull bar Lighting & Electrics: - Full LED system according to EU/ADR standards - LED three-chamber lights with chrome rings - LED rear fog lamp, LED license plate lamp - LED side markers with indicator function - LED brake light - 2 additional LED reversing lamps (side mounted) - Interior trough lighting (LED, switch on left frame with indicator) - Socket: 15-pin Accessories: - Two PVC toolboxes (each 660 x 500 x 4...

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2026, prostornina tovornega prostora: 50 m³, barva: modra, Leto izdelave: 2025, Oprema: ABS, TAKOJ NA VOLJO!!! ZELO DOBRO STANJE!!! KOT NOVO!!! Wilton NW-3 kiper korito iz Hardox jekla, 50m³ Fsdoyzq Stjpfx Anujgf

Stanje: novo, barva: oranžna, voznikova kabina: drugo, vrsta prenosa: drugo, prostornina tovornega prostora: 10 m³, dolžina tovornega prostora: 5.250 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 950 mm, Vehicle location: Bovenden, steel body, jet side walls Body: Meiller steel tipper body approx. 10.5 m³, dismantled from MAN 33.440 TGS 6x6 – 73453 – with a wheelbase of 3900 mm, roof protection, ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Fjdsvhg Rgopfx Anuogf

Stanje: novo, največja dovoljena obremenitev: 30.649 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 27 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Schmitz Cargobull SKI 24 SL 7.2 | 3-Axle Tipper Semi-Trailer | Aluminium Body 27 m³ Fgsdjy Iii Rspfx Anuof Technical Specifications: - Permissible Gross Weight: 36,000 kg (technically 39,000 kg) - Unladen Weight: approx. 5,351 kg (+/- 3%) - Volume: approx. 27.2 m³ - Internal Body Length: approx. 7,500 mm - Internal Body Width: approx. 2,440 mm - Sidewall Height: approx. 1,500 mm - Fifth-Wheel Load: 12,000 kg - Axle Load: 24,000 kg - Tyres: 6x 385/65 R22.5 on steel rims Chassis & Body: - Weight-optimised frame in new design - Standard 7.2 frame made of high-tensile steel, welded - Foldable underrun protection, suitable for road finishers - 2" kingpin according to SAE standard, replaceable - Lateral impact protection in Schmitz Granit - Plastic mudguards with separate lamp brackets - Mud flaps with Schmitz logo Axles & Suspension: - 3 x SCB 9 t ROTOS axle assembly, disc brakes Ø 430 mm - Automatic/pneumatic axle lift on 1st axle with starting aid - Air suspension SCB MRH4-KU35 Hydraulics: - HYVA hydraulic cylinder 170–250 bar (low and high pressure operation) - Hard-chromed smallest stage - Hydraulic hose with screw coupling (1" female thread, max. 250 bar) - Bracket and parking position at working platform Braking System: - Two-line compressed air system with standard couplings - EBS 2S/2M incl. stability programme - Steel air tanks - Double diaphragm spring brake cylinders - Lifting and lowering device with auto-reset function - Load pressure gauge Electronics & Safety: - EBS power supply via ISO 7638 + CAN - Automatic lowering during tipping process - 2 wheel chocks with holders TrailerConnect®: - TrailerConnect control unit CTU incl. battery - CTU Module 1 (position & technical data, 12 months) - Data storage (12 months) - Tyre pressure monitoring system Lighting: - 24V lighting system with multi-chamber tail lights - 2x 7-pin sockets + 1x 15-pin socket - LED side marker lamps with indicator function - White front marker lamps - 2 LED reversing lights at the rear - LED lane position lights Body & Superstructure: - Aluminium box body 7,500 mm, height 1,500 mm, internal wall thickness 3.5 mm - Aluminium floor: rear 8 mm / front 7 mm - Front wall inclined 20°, with reinforced supports for front tipping cylinder - Working platform with front left access and ladder for entering the body - Rear wall flap made of aluminium, inclined, with continuous seal - 4 hook locks, mechanical, incl. additional toggle latches - Centrally positioned grain hatch with cover - Reinforced rear end Tarp & Frame: - PVC sliding roof tarpaulin, silver (RAL 9006) with side locks - Straight roof frame with swivelling/removable crossbars - Tarpaulin operation rod (short version) Paintwork: - Tipper body: Light grey RAL 7035 - Chassis: Nova grey - Wheels: Silver RAL 9006 - Wheel hubs: Black KTL-coated - Contour markings in red (rear) and white (sides) Approval: - Vehicle with German documents - EU type approval incl. CoC - "A" sign for waste transport For further information, please do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2025, Oprema: ABS, F.X. Meiller 25 m³ NOVO VOZILO 5 x na zalogi - 3. dvižna os - Jeklena prekucna kesona - Dvižna os - LED zadnje luči - LED stranske označevalne luči - LED osvetlitev registrske tablice - Kolutna zavora - Prednja stena: 4 mm BS 70 - Zadnja stena: 4 mm HNW Hardox - Stranske stene: 4 mm HBW Hardox 450 - Dno: 5/6 mm HBW 450 Hardox, po meri - Višina stranskih sten: 1.500 mm Fsdpfx Ajw Rittenujgf Pridržujemo si pravico do napak in vmesne prodaje. Interna številka vozila: 11235+11236+11237+11238+11239 Podpora preko WhatsApp na voljo! Za vprašanja glede vozila ali dodatne informacije nam pišite prek WhatsApp Whatsapp Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 28.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.400 mm, prostornina tovornega prostora: 24 m³, Oprema: ABS, ? Jeklena polkrožna keson ? Preklopna podvozna zaščita ? Vzvratna kamera ? Smart Board ? Bobnasta zavora ? Odrasna ploščad Fgodpjyu Eqvofx Anuof ? ABS ? Zračno dviganje osi ? EBS ? Rolo ponjava ? BPW osi Vse navedbe brez jamstva / vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: Fgodpfjl Th Htox Anujf * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking locations and 2 on the front wall ----Chassis: * High-tensile steel chassis ----Tipping Platform: * Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance * Bolt-on rear stanchions * Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open * 4 mm fine-grained steel floor plate * Rear mounting rails for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 ----Painting: * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air tanks and support winch painted black * Drop sides painted RAL 9010 pure white * Other RAL-coloured side wall painting available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (not previously in use) * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer set ----Drawbar / Flange eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * Jost mechanical landing gear in front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at the central locking mounting points as well as 2 hooks on the front wall ----Chassis: * Chassis fabricated from fine-grain steel Fgsdjl Th Duspfx Anusf ----Tipper body: * Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters * Rear stanchions bolted * Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors * 4 mm fine-grain steel floor plate * Rear mounting rails for loading ramps ----Load securing: * Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame ----Ramps: * One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment for ramps integrated underneath the load area in the chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Side wall paintwork in RAL 9010 pure white * Other RAL color tones for side walls available at extra cost ----Additional Information: * Reinforced body with load securing certificate * Vehicle comes with one-day registration (never used) * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 29.365 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2004, prostornina tovornega prostora: 25 m³, Leto izdelave: 2004, Oprema: ABS, Fliegl DHK 350 3-axle, lifting axle, 25m³ aluminium tipper body, steel chassis Fodpfox Sbwnjx Anusgf Condition: good, ready for operation Tyres: 50-95%

Stanje: rabljeno, največja dovoljena obremenitev: 28.040 kg, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2004, prostornina tovornega prostora: 25 m³, Leto izdelave: 2004, Oprema: ABS, Fliegl ZHKA 350, 2 axles, lift axle, 25 m³ aluminium tipper body, steel chassis Condition: good, ready for operation Fodpfx Aex Sb Dbonuegf Tyres: 40-85%

Stanje: rabljeno, največja dovoljena obremenitev: 27.290 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.853 mm, Oprema: ABS, SDS390 101m³ X-TRA Long Moving Floor SAF Lift Axle * German Semitrailer * 101m³ X-TRA Long Model * SAF axles * Lift axle * Disc brakes Fgsdorwvl Tspfx Anuef * Floor: moving floor with wear plate at the rear made from V2A stainless steel, floor planks made from aluminium, 8 mm floor profile, ribbed design, end caps in aluminium * Tires: 385/55 R 22.5 — 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Permissible total weight: 35,000 kg * Payload: 27,290 kg * Air suspension * All information subject to change * Further details and criteria on request Additional Service Offerings * Repainting and retrofitting possible * Short-term and export license plates available * Transfer and shipping possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available: We cooperate with several leasing companies and can offer every customer the best fitting financing solution. We also often support customers with a weaker credit rating and can connect you with strong leasing partners. * In-house workshop Languages spoken: Polish, English, Russian. Repainting in your desired color is available at our facility with high quality and at a competitive price. Unable to visit and inspect the truck in person? No problem—feel free to appoint an independent surveyor of your choice to perform a technical and visual inspection. Should any defects be found, we can remedy them promptly and professionally in our workshop. Additionally, we offer Europe-wide delivery of your new used truck for an extra fee.