Fliegl 3Achs Tieflader Anhänger Dts-S 300 Mit Kröpfung nakup rabljenega (58.372)

Stanje: rabljeno, lastna masa: 11.130 kg, največja dovoljena obremenitev: 36.870 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5 140J, velikost zadnje pnevmatike: 235/75 R 17,5 140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 4 kolesne vdolbine s pokrovi, pritrdilne zanke, elektro-hidravlična črpalka za rampe in podporo, -- pridržujemo si pravico do tiskarskih napak, sprememb in nepravilnosti, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Lajdpfxjzddh Se Aicjc

Stanje: rabljeno, Funkcionalnost: nepreverjeno, lastna masa: 8.100 kg, največja dovoljena obremenitev: 24.500 kg, Leto izdelave: 2009, Schubboden prikolica je dizajnirana za fleksibilan transport različitih roba. Rinfuzna roba kao što su drvna sečka, otpad ili piljevina može se lako prevoziti i istovarati standardnim radom pokretnog poda. Takođe je moguć prevoz robe na paletama i komadnog tereta. Pored toga, prikolica ima integrisani sistem za duvanje. Materijal se pomoću transportnog puža prenosi ka sredini vozila, a potom se preko ćelijaste brave dozirano unosi u struju vazduha. Na ovaj način, na primer, drvni peleti mogu se upuhivati u skladišne prostorije ili stočna hrana u silose. I druge rasute materije koje lako klize mogu se na ovaj način pouzdano i kontrolisano upuhivati. Lsdpfsybbq Sex Aiceac Pokretni pod zamenjen 2001. godine. Nema ventilatora/blowera na prikolici. Nosivost oko 24t Zapremina 90m3 Tropper Drvni peleti Duvanje/blasenje Pumpanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Lajdpoi Ri Hrofx Aicsc Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.995 kg, največja dovoljena obremenitev: 16.005 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 8.450 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema sta pripravljeni individualno po željah stranke. Podvozje centralnoosni priklopnik Varjena konstrukcija iz finezrnatega jekla Podporna noga z 2-stopnjskim menjalnikom spredaj Zložljiva zadnja podpora 2 zagozdi s pritrditvijo Stranska zaščita iz aluminija Zadnje blatnike po celotni širini Četrtinski blatniki pred in za vsako osjo z antisprašnimi loputami po EG 1 alu zaboček s pokrovom iz nerjavečega jekla Pritrditev za kontejner, 1 par izrezov za zaklepanje v tleh za 1 x 20 ft kontejner, 1 par adapterjev za kontejnersko zaklepanje Razširitve izvlečne do 3.000 mm Sredinsko shranjevalno mesto za lesene podnice + lesene podnice 70 mm za razširitev na 3000 mm Privezne ušesca za nizkopode 1 par dodatnih zank za privez spredaj v prečniku, po 10 t 5 parov vgrajenih obročastih priveznih ušesc v zunanjem okviru, po 5 t (možnost predelave v vtore za vložke) 7 parov priveznih gobic, vgrajenih zgoraj in ob strani v zunanji okvir, po 10 t Priklop centralnoosnega priklopnika Vlečna gred s preverjenim vlečnim obročem 50 mm Osi + vzmetenje Bobnaste zavore, proizvajalec po izbiri "Natančna laserska izmera osi/podvozja" za zmanjšanje obrabe pnevmatik in porabe goriva Razmak osi 1810 mm Zračno vzmetenje Zavorni sistem 2-vezna zračna zavorna naprava Barvno označene linije za lažje servisiranje Povratna zavora s shranjeno energijo 2 medsebojno zaščitena sprednja spojna priključka s povezovalnimi cevmi do vlačilca Parkirni vtičnici za ABS/EBS in zračni priključek na vlečni gredi 24 V EBS, elektronski zavorni sistem s EBS vtičem spredaj s ventilom za dvig/spust Stabilizacijski sistem vozila Prepoznavanje osne obremenitve preko EBS-canbus signala, prikaz v vozniški kabini "RDKS" – sistem za nadzor tlaka v pnevmatikah po ECE R 141, prikaz v vlečnem vozilu preko EBS Kolesa in pnevmatike 235/75 R17,5, proizvajalec po izbiri Zaščitne kapice za vijake koles Elektrika 24 voltov, večkomorni LED žarometi, stranski rumeni LED, LED osvetlitev tablic Stranska rumena LED osvetlitev povezana z utripalniki "utripajoče stranske luči" Premium LED bočne označevalne luči, vsaka s 20 LED diodami 2 sprednji beli LED pozicijski luči 2 zadnji rdeče/beli LED sledilni luči 2 x 7-polni medsebojno zaščiteni vtičnici spredaj s priključnim kablom Parkirne vtičnice za elektriko na vlečni gredi LED delovne luči na obeh straneh 2 dodatni LED delovni žarometi zadaj 1 LED rotacijska luč z nosilcem, upravljanje preko pozicijske luči Lasdpfx Aozcvt Reicsc 2 para opozorilnih tabel, dvojno LED osvetljene in izvlečne do 3.000 mm Tla približno 70 mm les (mehki les), v območju blatnikov jekleni/tolčeni profil Naklonski zadnji del z "Mega Grip" prevleko iz zobatega rešetkastega profila Nizka nakladalna površina vključno z zadnjim naklonom 6.500 mm Prednja stena / kotni nosilci Alu profil, ca. 400 mm, snemljiv Nakladalne rampe Jeklene rampe, 2.800 mm dolge, 750 mm široke, stransko premične Površina ramp z "Mega Grip" iz zobatega rešetkastega profila Hidravličen pogon preko priključka na vlačilcu z dušilcem, upravljanje levo spredaj Hidravlično stransko pomikanje ramp, posamezno upravljivo Hidravlični priključek s SVK vtičem NW 10/3, vključno s spojno cevjo Zemlja odobritve/tablice z Dekra atestom in poročilom (po §13 EG-FGV) Opozorilna tabla po ECE-70 Nakladalne rampe vroče cinkane

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.900 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, skupna dolžina: 8.685 mm, skupna širina: 2.550 mm, skupna višina: 3.970 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojeni posameznim željam stranke. Podvozje: Centralnoosna prikolica Varjena konstrukcija iz finega zrnatega jekla Zunanja šasija rahlo poševna s 'Load-Lock profilom' za obešanje napenjalnih trakov Opomba! Za obešanje trakov v kombinaciji s stranskimi stenami je potrebno odpreti stranske stene! 'Vario-Lash' pritrdilne obroči za vstavljanje v 'Load-Lock profil', vsak po 2,5 t, samostojni Podporna noga z menjalnikom spredaj, z ravnim spodnjim delom in enostranskim upravljanjem na FR desni Teleskopska zadnja podpora Izvlečna lestev na zadnji strani Držalo za vrata ob strani Podložni zagozdi s pritrditvijo Stranska zaščita pred naletom iz aluminija Zaščita pred podvozjem iz jekla Četrtinski blatniki pred in za vsako osjo Zaščita pred naletom zadaj Plastična orodjarna z izvlečnim predalom in notranjo polico, širina=650 mm / višina=520 mm / globina=670 mm, zaklepanje z obešanko Vlečna naprava za centralnoosno prikolico po željah stranke Osi in vzmetenje SAF osi z diskastimi zavorami, premer diska 430 mm 'Lasermerjeno podvozje/osi' Zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje Zavorni sistem Dvovodna tlačno-zračna zavora, barvno označeno za lažji servis. Parkirna zavora z vzmetnimi valji Duomatic spojka spredaj, z povezovalnim kablom do vlečnega vozila EBS – elektronski zavorni sistem s prednjim EBS priključkom in kablom Pozor: Prikolico lahko vlečejo le vozila, ki zagotavljajo delovanje ABS! Z dvižno/spuščnim ventilom Stabilizacijski sistem za vozilo Kolesa in pnevmatike 385/65 R22.5', proizvajalec po izbiri Jeklena platišča, tovarniško srebrna Elektrika 24-voltni sistem, večkomorni žarometi, stranske rumene LED luči 2 sprednji beli pozicijski luči 2 zadnji belo/rdeči smerniki 1x 15-polni vtikač spredaj z povezovalnim kablom Tla Vezane plošče, debeline cca 30 mm, za visoke točkovne obremenitve Dolžina nadgradnje cca 6.900 mm Prednja stena/ vogalni stebrički spredaj Višina 2.580 mm, jekleni vogalni stebrički v volumenski izvedbi, naprava za sprostitev stranskega ponjavnega platna Sredinski stebrički Premični ob strani po celotni dolžini, z 4-nastavitvenimi žepi in dolgim spodnjim žepom Ledpfx Aiezcqh Necjac Vložne letve VRSTNA aluminijastih V-vložnih letvic Zadnja stena/ vogalni stebrički zadaj Jekleni vogalni stebrički zadaj do spodnjega roba strehe, obešalo za ponjavo z okroglim cevom in zategovalcem platna Zadnja vrata – dvokrilna, vsaka z dvema notranjima ročnima zapiraloma Ponjave Ponjave z varjenimi horizontalnimi in vertikalnimi trakovi Napetostni zapirali iz nerjavečega jekla Možnost naročila strankinega potiska na stranskih ponjavah in zadnjih vratih Streha Fiksna streha s ponjavo in letvami, barva ponjave: bela Optimalna dežna letev zadaj, zgoraj na zadnji prečki, nad vrati Država registracije / oznake Nemčija z Dekra pregledom in strokovnim mnenjem (po §13 EG - FGV) Certifikat za varnost tovora po EN 12642 XL 24/7-Servisna telefonska številka Priprava za enovrstični nosilec registrske tablice Odblesni trakovi: beli, spodaj vzdolž stranskih ponjav in zgoraj v vogalih (če so stranske stene vidne, potem trak spodaj na stranskih stenah) Odblesni trakovi: rdeči, obsegajo zadnja vrata *na voljo tudi kot "drive-through" (prekladalna) različica Rešitev transporta po meri

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 2.200 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 6.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized individually per customer request. Chassis: Central axle trailer, low-bed Fine grain steel welded construction Gear support leg at front Telescopic rear support 2 wheel chocks with holders Steel mudguards covering both wheels Side underrun protection in aluminium Drawbar assembly for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 250 mm Ledpfxsi Ri Ebo Aicsac Axles & Suspension BPW drum brake axles “Axle/chassis laser alignment” reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235 / 75 R 17.5” Manufacturer’s choice Factory silver steel rims Brake System Dual-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle 24V ABS and ALB system, ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the ABS system is operational! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red lane indicator lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Platform TTS Low-positioned steel trough, platform floor with steel/chequer plate covering, steel walls solidly welded to the floor Platform length: 4,500 mm Front and side “Load-Lock” profiles for strap attachment (Front: 8 points; each side: 12 points) Note: Minor floor undulation due to welding distortion is possible! 2 pairs of lashing eyes: 1 pair at the front corners of the steel trough, 1 pair at the rear in the floor, each rated to 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With carry handle on the ramps Wooden covering (ramp tip with chequer plate steel) Gas pressure springs for single-person operation Operating notes The specified gross weight is technically possible; depending on the load, the permissible axle/support/kingpin loads may limit the actual gross weight. (Poor handling and tracking can result from incorrect load distribution) Country of registration / Number plates Country of registration: Germany Includes Dekra inspection and report (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective tape to ECE R 048, white on the sides, red at the rear Paintwork Frame painted or galvanized according to customer preference Loading ramps hot-dip galvanized Tailor-made transport solution Configure your Fliegl vehicle to meet your requirements. The example vehicle shown serves as a sample. Production and equipment are tailored individually to customer requirements.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21001014667, lastna masa: 2.200 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 6.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis Central Axle Lowbed Trailer Fine-grain steel welded construction Telescopic support leg in the front Telescopic rear support 2 wheel chocks with holder Steel fenders over both wheels Aluminium side underrun protection Central axle trailer drawbar assembly Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker balance) Wheels and Tyres 235/75 R 17.5'' Brand according to manufacturer’s choice Factory silver steel rims Braking System 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit 24-volt ABS and ALB, with ABS connector at the front and connection cable Note: The trailer must only be towed by vehicles that ensure ABS functionality! Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting 2 white position lights at the front 2 white/red lane-keeping lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connection cable Deck TTS Low-mounted steel tray, deck floor with steel/chequer plate covering, steel sidewalls solidly welded to floor Deck length 4,500 mm Front and side tray with 'Load-Lock' profile for lashing strap anchoring (front: 8 points; each side: 12 points) Note: Slight floor waviness possible due to welding distortion! 2 pairs of lashing rings, 1 pair at the front corners of the steel tray and 1 pair at the rear in the floor, each rated 5 tonnes Loading Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable Ledpfx Ajzcnzajicjac With hand grip on the ramps Wood-covered (tip area with steel/chequer plate) Gas strut-assisted for one-person operation Operating Notes The stated gross weight is technically possible; depending on load, the gross weight may not be achievable while staying within allowed axle, drawbar, and kingpin loads (poor handling and tracking possible due to incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: Hot-dip galvanised including passivation “15-year warranty against rust-through” Note: Floor waviness possible due to hot-dip galvanising! Ramps: Hot-dip galvanised Note: The images shown are archive photos!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 2.520 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 7.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customised based on customer specifications. Chassis Central Axle Lowbed Trailer Fine-grain steel welded construction Gear support foot at the front Telescopic rear support 2 wheel chocks with holder Steel mudguards covering both wheels With anti-spray mudflaps only on the last axle Side underrun protection in aluminium Transverse stop at front, insertable into floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balancing (rocker compensation) Wheels and Tyres 235 / 75 R 17.5" manufacturer's choice Steel rims, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit Power sockets for electrics, ABS/EBS and air connection at the towing fork or drawbar 24-volt EBS electronic braking system with EBS plug at the front, including connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! "TPMS" Tyre Pressure Monitoring System according to ECE R 141, display via in-cab monitor through EBS Electrics 24-volt system, multi-chamber LED taillights, side amber LED lighting, LED licence plate lighting Side amber LED lighting connected to indicators (side marker lights blink) 2 white position lights at the front (LED) 2 white/red lane departure lamps at the rear (LED) Premium LED side marker lights, each with 20 LEDs per unit Ljdpfx Ajzcnugoiceac 2 x 7-pin non-interchangeable plugs at the front with connection cables Platform Low-profile steel trough, platform floor from steel/chequer plate, steel sides and floor robustly welded Platform length 5,500 mm Trough with "Load-Lock" profile at front and sides for lashing straps (8 at front, 16 per side) 2 pairs of lashing eyes: 1 at the front corners of the steel trough, 1 at the rear in floor, each rated 5 t 3 additional pairs of lashing eyes in the floor, each rated 5 t 4 pairs of lashing eyes screwed onto sidewalls Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With hand grip on the ramps Timber-covered (tread area covered with steel/chequer plate) With gas strut for one-man operation Rear Wall / Rear corner posts Plywood board, 400 mm high, plug-in, positioned between ramps Operating Instructions The total weight specified is technically achievable. Depending on the cargo, the total weight may not be attainable due to statutory axle, support, and kingpin loads Registration / Signage Registration country: Germany Approval according to EC 2007/46 Prepared for single-line number plate holder Conspicuity marking with reflective tape in accordance with ECE R 048, white on sides, red on rear Warning sign according to ECE - 70 Customised Transport Solution

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.100 kg, največja dovoljena obremenitev: 34.900 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Container mounts: 1 x 20-foot container central (or swap body container 7.15 / 7.45 m), fixed at the front, container lock twistlocks in extended version 24 t 2-speed landing gear, single-sided operation with anti-spray mudflaps according to EC standards Stainless steel drip tray with 1 1/4" drain pipe + 1 1/4" shut-off valve, incl. drip plate, perforated tread plates approx. 400 mm wide, left & right between drip tray and main longitudinal beam 4 hose racks approx. 4,500 mm long (hose box) for hose tubes: 2 x DN 200 outside + 2 x DN 160 centred, rear hose box (stainless steel) 300 mm deep, splash water protected, lid (stainless steel) all-round rubber seal, drainage hole at lowest point, then without lid on hose tubes 1 stainless steel grounding lug at the rear right side of the frame, with international grounding sticker on the frame Lsdpfxoi Rixks Aicjac Access steps right rear on underrun guard, rear right outside on main beam with tread plate approx. 260 mm long and 300 mm wide Axles & Suspension SAF disc brake axles Axle/chassis laser alignment: reduces tyre wear and fuel consumption Offset axle spacing (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, incl. forced lowering and start assist, operated by 3x brake activation Braking System 2-line air brake system Colour-coded pneumatic lines for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: Trailer must only be towed by tractors that ensure ABS functionality! With lift & lower valve Vehicle stability control system Axle load recognition via EBS CAN-bus signal, for display in cab (truck must be pre-equipped), not calibrated as a weigh scale Wheels and Tyres 385/65 R22.5, manufacturer as per supplier’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red marker lights at rear 1 x 15-pin socket at front, without connection cable Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight within the permissible axle/support/kingpin loads may not be achievable (poor driving and trailing performance may result from incorrect load distribution) This vehicle may only be loaded with 20’ tank containers complying with ISO 668 and especially ISO 1496-3! Tank containers must have 'end-load-transfer areas' (end transverse beam load transfer areas)! Country of Registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate to ECE 70 Inspection according to ADR sec. 9.1.1.2, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3), with warning panel at the rear; not valid for substances UN 0331 and 0332 (explosives B-E) Conspicuity marking with reflective tape

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.070 kg, največja dovoljena obremenitev: 33.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 990 mm, skupna dolžina: 13.990 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Lajdpfxoi Ri R Ss Aicec Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized individually to customer specifications. Chassis: Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot container flush with rear Center telescopic 1st stage, rear extension extended 1st stage: 2 x 20-foot or 1 x 40-foot with or without gooseneck tunnel Center telescopic 2nd stage, rear extension extended 2nd stage: 1 x 45-foot with gooseneck tunnel and overhanging to the rear Center telescopic 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45-foot with long gooseneck tunnel and chamfered corners Center telescopic as interlocking central tube frame with bolt locking With rear height adjustment and foldable intermediate supports for containers without tunnels Container guide at the front, plug-in and detachable Plug adapter for front locking, for securing containers without tunnel from below, with holder for when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t, 2-speed landing gear, single-sided operation Extendable underrun protection for 45-foot container Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser measured to reduce tire wear and fuel consumption Staggered axle spacing mm (intermodal operation) up to 44 t gross combination weight Air suspension 1st axle with automatic lift axle, including forced lowering and start-up aid, activated by braking 3 times (start-up aid functional up to 30% axle overload and a maximum speed of 25 km/h) Brake System 2-line compressed air brake system, color-coded pipeline layout for easy service. Spring-actuated parking brake Tele Control Axle relief for easy telescoping 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connecting cable Important: The trailer may only be towed by tractors that ensure effective ABS! With raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, display in the driver’s cab (truck must be pre-equipped accordingly, no truck installation; not a certified scale) Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, rear and brake light in LED, side yellow LED lighting (Note! With certain towing vehicles, malfunction indications may occur despite correct operation) 2 white position lamps at front 2 white/red lane marker lamps at rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Operating Notes When transporting 45-foot containers with a short tunnel, with or without front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16,500 mm is exceeded! The underrun protection must be manually extended! An exemption approval according to § 70 StVZo is required! Country of Registration / Plates Germany Approval according to EC 2007/46 24/7 Service Hotline Tailored Transport Solution

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.800 kg, največja dovoljena obremenitev: 28.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.200 mm, skupna širina: 2.550 mm, skupna višina: 2.645 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized to individual customer specifications. Chassis - Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, mounting positions for warning signs at the rear, outer frame with load-lock profile for lashing strap attachment, 24 t two-speed landing gear, single-sided operation, ferry lugs marked in yellow (two at the rear as towing eyes), container locks: 4 pairs of container lock fittings recessed in the floor for either 2 x 20-foot or 1 x 40-foot containers, stake pockets recessed in the outer frame (internal dimension 80 x 80 mm), central stake pockets recessed in the floor (internal dimension 80 x 80 mm), plug-in stanchions B=80 / D=80 / L=1200 mm, hot-dip galvanized, lashing eyes recessed into the outer frame (each rated at 5 t), 2 toolboxes approx. W=1,230 / H=450 mm, fully enclosed, mounted across the full width in front of the axles, replacing side underrun protection, foremost container lock as removable pin, lashing/stanchion rails transversely recessed in the floor across the full width up to the outer frame, approx. 100 mm high, 20 mm round steel rails, top and bottom, spacing between upper and lower rail approx. 60 mm, bottom finished with angle plate, half open downwards. For lashing and inserting 80 x 80 mm stanchions, open compartment for warning boards (as technically feasible). Axles & Suspension SAF disc brake axles (axle/chassis laser-aligned) to reduce tire wear and fuel consumption, air suspension, 1st axle is an automatic lift axle, including forced lowering and traction aid, activated by 'braking 3 times', 2 ride heights adjustable via hand control: Lajdpfxszb Iu Dj Aicoc - 1 x for coupling height 1120 mm - 1 x for coupling height 1200 mm Brake System 2-line compressed air brake system, color-coded piping for easy service, spring brake parking brake, 2 non-interchangeable connectors at the front, EBS (Electronic Brake System) with EBS socket at the front, with lift & lower valve, vehicle stability control system. Wheels and Tyres 385/65 R 22.5", steel rims, factory silver finish Electrics 24 Volt, 4 x 3-chamber tail lights, side LED marker lights (yellow), 2 white LED front position lights, 2 rear LED lane-keeping lights (white/red), 2 x 7-pin and 1 x 15-pin non-interchangeable front sockets, without supply cables Rotating beacon with holder, controlled via parking light (removable lamp) 2 pairs of double warning signs, LED-lit, extendable to 4,500 mm and removable with plug. Additional bracket at the rear Additional 7-pin socket (ISO 1724) on rear underrun protection Floor Phenolic plywood approx. 30 mm thick, cross joints with omega inserts, installed on longitudinal stringers, for high point load resistance (forklift axle load up to 7,100 kg max) Front Wall / Corner Posts 25 mm aluminium hollow section, 1,650 mm high, front corner posts in volume version steel Inside of front wall additionally lined with 1,250 mm high phenolic plywood "Crash-Blocker", inner lower section (approx. 140 mm high) with steel impact protection Storage compartment for 80 x 80 mm plug-in stanchions inside front wall Painting Frame: Hot-dip galvanized including passivation, or painted as per customer specification Landing gear feet: Black coated Front corner posts: Galvanized and painted to match front wall color Front wall:

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44001000966, lastna masa: 9.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, dolžina tovornega prostora: 7.145 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.120 mm, skupna širina: 27.500 mm, skupna višina: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: rdeča, These images are for reference only! Gross weight perm. / technical: 24,000 / 40,000 kg Payload perm. / technical approx.: 14,600 / 30,600 kg Axle load perm. / technical: 24,000 / 40,000 kg Unladen weight (base version) approx.: 9,400 kg +/- build tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low loader platform length in driving lane area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed (loaded) approx.: 900 mm Tow height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium 1 plastic toolbox Extendable widenings to 3,250 mm (not at rear bevel) (tracking width of transported construction machines or vehicles must not exceed outer frame width of 2,750 mm) Central storage compartment for wooden planks 70 mm wooden planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, integrated in the floor longitudinal beams Lashing rings, low loader: 2 pairs of lashing rings on the neck, each 5 t 1 pair of lashing rings in the rear bevel Ledpfx Aoyxq A Heicjac 4 recessed lashing rings, placed centrally in the floor 2 pairs of key slot profiles in the driving lane, for longitudinal guide rails and as additional lashing points 6 pairs of lashing mushroom anchors in the low bed outer frame, each 10 t 5 pairs of stake pockets in the outer frame of the low bed 4 additional pairs of 10 t lashing rings: 1 on the neck 3 recessed in the floor of the low bed Drawbar coupling, turntable trailer: Drawbar with tested 50 mm towing eye Axles + suspension: Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker leveling) Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver Brake system: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines for towing vehicle ABS and ALB, with ABS connector at front, with connection cable Attention: The towed trailer may only be pulled by towing vehicles that ensure proper function of the ABS! Floor: Neck area with steel/chequer plate flooring then 70 mm softwood floor, wheel recesses with steel/chequer plate flooring Rear bevel with 70 mm softwood floor Access ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surface Hydraulically operated via tractor PTO Operating instructions: For 10,000 kg axle load, a special permit is required, only indivisible loads permitted!!! Note! Overlength and excess width, special permanent approval required. For applications for special permits for heavy-duty transport, an axle load display is required for air-suspended vehicles! This applies to all deviations from § 34 StVZO (axle load and permissible gross weight exceedance) that require a special permit under § 70 StVZO. The declared gross weight is technically feasible; depending on the load, the gross vehicle weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) These images are for reference only!

Stanje: rabljeno, številka stroja/vozila: WFDFLT22001007597, lastna masa: 6.200 kg, največja dovoljena obremenitev: 11.800 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2018, višina nakladalnega prostora: 200 mm, skupna dolžina: 11.600 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: rdeča, Further Information Chassis: Steel welded construction, double cranked with low bed in front of and behind the axle assembly, low bed beveled for driving on, turntable with robust ball bearing slewing ring, foldable rear support, wheel chocks, side underrun protection, quarter shell mudguards. Lashing points: Over front axle: 2 pairs of ring lashing eyes each rated 5t at the front at the cranked part of the low bed / Rear axle: 6 pairs of lashing eyes laterally in the low bed each rated 8t. 6 pairs of lashing eyes each rated 5t between the longitudinal beams, pair of stake pockets recessed in the outer frame, inside dimension 70 x 40 mm, or alternatively to stake pockets, 5t ring lashing eyes embedded in the floor. Drawbar: Certified 40 mm towing eye Axles: BPW drum brake axles Brake system: 2-line compressed air braking system, spring-actuated parking brake, 2 fail-safe coupling heads at the front Electrics: 24 volts, multi-chamber lights, lateral yellow lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, beacon with bracket, pair of illuminated warning panels extendable to 3,000 mm, 2 x 7-pin fail-safe connectors at the front Floor: Front crank with steel / chequer plate covering, stowage box recessed in the transition to the crank, track area and middle section between the beams with steel / chequer plate covering, rear slope with 70 mm softwood floor, low bed area including rear slope 5900 mm Ramps: Hanging rail for aluminum ramps across the entire width, as U-profile across the entire width. Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, stowage compartment for ramps between beams Lasdpfx Aiji Ri N Ujcjc Approval: Contour marking with reflective strips according to ECE R 048, white at sides and red at rear

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised transport solution Configure your Fliegl vehicle according to your specifications. The vehicle shown is an example. Production and equipment are tailored individually to customer requirements. Chassis – Semi-Trailer for Forwarding Companies High-tensile fine-grained steel welded construction in lightweight design, kingpin plate with replaceable 2'' kingpin, main frame reinforcement for 25 t capacity, centred over 3 m loading length when retracted. 13 pairs of welded lashing hooks on the cross members for securing straps 23 pairs of recessed lashing rings in the outer frame, each rated at 3.5 t Outer frame fitted with Load-Lock profile for strap attachment Note! Not usable with side boards! 24 t, two-speed landing gear, reinforced version for uncoupling under load, single-sided operation Wheel chocks with holders Aluminium side underrun protection Rear underrun guard Half-shell mudguards with anti-spray flaps according to EU regulations 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit 1 closed stanchion storage box, open at the top, fitted under the loading platform, doors on both sides, width=450 mm / height=400/420 mm / length=2460 mm 6 pairs of extendable stanchion sockets for 80x80 mm box-section stanchions, extendable from load width 2000 mm to 3100 mm 4 pairs of recessed stanchion sockets in the outer frame for 80x80 mm box-section stanchions 11 recessed stanchion sockets in the centre of the floor for 80x80 mm box-section stanchions, with reinforcement beams, installed between the outer stanchion sockets 5 x 3 pairs of stanchion sockets recessed into the outer longitudinal beams for 80x80 mm box-section stanchions, with reinforcement - for securing loads in the forward and rear direction during transport of reinforcing mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions, W=80 / D=80, usable height approx. 1850 mm, hot-dip galvanised, with rope guide at the top for belt tensioning 12 lightweight plug-in stanchions, W=80 / D=80, usable height approx. 1850 mm, hot-dip galvanised, each with welded lashing ring at the bottom on both sides Note: Stanchion sockets/plug-in stanchions are not designed for sole load securing of long parts, pipes, etc. without lashing 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) 6 construction steel winches with wire rope and reverse hooks, with rope guide through outer frame, 1 removable plug-on gearbox for steel winches supplied loose Telescoping Main frame telescopic extendable by max. 4,000 mm and lockable at approx. every 500 mm Locking via pneumatic pin system + frame locking indicator on both sides, operated via hand button. Controls for brake/lock and suspension on front left (driver’s side) in front of the axles Storage compartment between the longitudinal beams when extended Axles & Suspension SAF disc brake axles, 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reverse light, additional locking on vehicle via hand button and manually via switch in towing vehicle (Pin 10), without truck installation required Axle spacing offset Air suspension Lsdpfji Ri Szex Aicjac First axle with automatic lift function, additionally electrically operable from the truck, with start assist Braking System Dual-circuit compressed air braking system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front EBS make at manufacturer’s choice, Electr

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21001012243, lastna masa: 2.500 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 630 mm, skupna dolžina: 7.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: modra, The images shown are archive photos! The vehicle may still be in use! Further information Chassis Central Axle Trailer Low Loader Fine-grain steel welded construction, gearbox support foot at the front, telescopic rear support, wheel chocks with holders, steel mudguards covering both wheels. Central Axle Trailer Coupling Assembly Drawbar with certified 40 mm towing eye, height-adjustable via spindle with a maximum adjustment range of 250 mm. Axles & Suspension Euro axles (manufacturer's choice), fitted with tapered roller bearings and S-cam brakes; axles/chassis laser-measured to reduce tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalisation (rocker compensation). Brake System 2-line compressed air brake system, spring-loaded parking brake, two foolproof coupling heads at the front with connection lines to the towing vehicle, ABS and ALB, ABS socket at the front, including a connection cable. Note: The trailer may only be towed by vehicles that ensure ABS functionality! Electrics 24 Volt, multi-chamber tail lights, yellow LED side lighting, two white position lights at the front, two white/red lane marker lights at the rear, one 15-pin plug at the front with connecting cable. Ledpfxjqmc Ras Aicoac Platform TTS Deep steel tray, floor made of steel/chequer plate, steel sidewalls solidly welded to the floor, platform length 5,500 mm. Front and sides fitted with Load-Lock profiles for securing lashing straps (8 at the front, 16 per side). Note: Minor floor warping due to welding distortion possible! Pair of lashing eyes: one pair in the front corners of the steel tray and one pair at the rear in the floor (each rated at 5 t). Additional pairs of lashing eyes in the floor (each rated at 5 t). Access Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with ramp handles, timber-covered, gas spring assisted for single-person operation. Operating Notes The specified gross weight is technically achievable; depending on the load, the gross weight may not be attainable in compliance with permissible axle, support, and fifth wheel loads (improper load distribution can result in poor handling/track behaviour). Country of Registration/Plates Country of registration: Germany, with Dekra inspection and expert report (in accordance with §13 EG-FGV), prepared for single-line license plate holder, contour marking with reflective tape as per ECE R 048 (white on the side, red at the rear). The images shown are archive photos! The vehicle may still be in use!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 14.680 kg, največja dovoljena obremenitev: 35.320 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 600 mm, skupna dolžina: 15.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is just an example. Production and equipment are customized to meet each customer’s needs. Chassis Lowbed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin 24 t, two-speed landing gear, single-sided operation, with straight base, without shift compensation Rear supports, foldable 2x wheel chocks with holders Aluminum side underrun protection Quarter-shell mudguards in front of and behind axle assembly With splash guards behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted transversely at the front of the gooseneck, with 2 storage trays Extendable widenings up to 3,000 mm (not on rear slope) (the track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden beams on the gooseneck, transverse at the front 70 mm wooden beams for extending to 3,000 mm Digger boom recess over the rear axles, extending to the rear, approx. 500 mm wide and approx. 230 mm deep Lashing eyes low loader 3 pairs of lashing eyes rated at 10 t each in front on the gooseneck, 8 pairs at 10 t each in the lowbed, 3 pairs of lashing rails in the track area of the lowbed, 3 pairs of lashing eyes at 10 t each in the axle/rear area Axles and suspension SAF drum brake axles Axles/chassis laser-aligned: reduces tire wear and fuel consumption With steering axle Air suspension Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel twin wheels, factory silver Braking system Two-line compressed air braking system, colored pipes for easier service Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer must only be towed by tractors that ensure ABS functionality! 2 foolproof coupling heads at the front, without connecting line With lift & lower valve, hold function in lower position + auto-reset function Axle load detection via EBS CAN bus signal, for display in the truck cab (truck must be properly prepared, no truck installation, not a certified scale) Vehicle stability system Trailer Info Center, for displaying vehicle data such as axle loads (not a certified scale), mileage, and diagnostics/system messages. Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear Lsdpfx Aiei Ri Hgeceac 2 x 7-pin foolproof sockets at the front 1x additional LED work light at the rear 1x LED beacon with holder, controlled via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck with steel/chequer plate cover 70 mm softwood flooring in the track area, steel/chequer plate in wheel arch area, lowbed left and right in track area hydraulically liftable via truck PTO Rear slope with 70 mm softwood flooring Lowbed length approx. 6,300 mm Side boards 25 mm aluminum hollow section, 400 mm high, insertable at the front and sides of the gooseneck Loading ramps Steel ramps, 2,800 mm long, 750 mm wide Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is for illustrative purposes. Production and equipment will be tailored individually according to customer specifications.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Lowbed Semi-Trailer Chassis Steel welded construction, fifth wheel plate with replaceable double kingpin and two kingpin positions 24 t two-speed landing gear, single-sided operation, with straight lower part, without compensating device Rear supports foldable 2 wheel chocks with holders Side underrun protection in aluminium Quarter-shell mudguards in front of and behind the axle assembly 1st pair of wheel recesses recessed after the gooseneck in the lowbed platform area, with ramped entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axle A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader types with precise specifications (if the total height is exceeded). Wheel recess covers sliding out from the main frame, with timber inserts. Extendable widening to 3,000 mm (not in rear ramp slope and not in the bottom of the wheel recesses) Storage compartment for timber planks on the gooseneck, positioned transversely at the front Timber planks 70 mm for widening to 3,000 mm Tie-down points lowloader 2 pairs of ring lashing eyes, each 5 t at the front on the gooseneck Ljdpfxji Ri Hce Aiceac 11 pairs of lashing mushrooms recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck, 9 x distributed in the low loader bed, first lashing eye 250 mm from the front and the last max. 250 mm from the rear, distance between lashing eyes not exceeding 1100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension Wheels and tyres 235 / 75 R 17.5 to manufacturer’s choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raise & lower valve Axle load detection via EBS Canbus signal, for display in the driver’s cab, truck must be correspondingly equipped Vehicle Stability Control System Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe sockets at the front 1 x LED beacon with holder, switchable via parking light 2 pairs of warning boards, double, LED illuminated and extendable to 3,000 mm, removable with plug Flooring Gooseneck with steel/chequer plate overlay Storage box embedded in the transition slope to the gooseneck After that, with 70 mm softwood flooring; in the bottom of the wheel recesses and wheel arch area steel/chequer plate overlay Lowloader platform including rear ramp slope 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp securing device below Tailored Transport Solution Configure your Fliegl vehicle according to your individual requireme

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT10401014064, lastna masa: 1.500 kg, največja dovoljena obremenitev: 2.300 kg, skupna masa: 3.800 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 1.000 mm, skupna dolžina: 4.300 mm, skupna širina: 2.460 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: zelen, multiple units available Single-axle container trailer Type EPS 38 for diesel generator set installation Single-axle trailer chassis Fine-grained steel welded construction Mounting of the generator unit by bolting Front support wheel in reinforced design, mechanically length-adjustable and foldable downwards 1 pair of two-speed support legs at the rear, with straight base, can be operated separately left and right Wheel chocks with holder Side underrun protection, aluminium, painted RAL 6031 bronze green matte Rear underrun guard, steel, painted RAL 6031 bronze green matte Mudguards in front of and behind the axle, top covered with sheet metal with anti-spray mudflaps 2 pairs of lashing cutouts, one pair at the front and one pair at the rear recessed into the crossmembers, each with 3 t capacity for loading the trailer, with labeling (sticker) 4 pairs of ferry lashing eyes, marked yellow Lashing eye stickers at each lashing point Steel perforated plate with rosette profile" on both sides next to the generator set, pull-out ladder on both sides Mounting bracket for 2 x 20l fuel canisters on the vehicle frame FR-right Central lashing eye sticker Toolbox steel, recessed at the front into the floor with drain holes and lined with perforated rubber mat, lockable lid, lock not included Drawbar arrangement for single-axle trailer Drawbar with approved 40 mm swivel towing eye / NATO towing eye Drawbar height-adjustable via spindle. The nut for the spindle fastening screw is at FR-right bottom Parking sockets for electrics/EBS and air Axle + suspension BPW axles with tapered roller bearings and S-cam brakes "Axle/chassis laser-aligned" for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Wheels and tires 235/75 R 17.5 Lsdpfxjzazrtj Aicjac manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connector lines to tractor unit Yellow connection FR-left, red connection FR-right ABS/EBS, electronic braking system with EBS socket at front, with connection cable EBS modulator fitted in protected position Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Vehicle – driving stability system Electrics 24 volt, multi-chamber lights, side LED lighting in yellow Electrics to ADR specification with certificate 2 white front marker lights and reflectors, 2 white/red lane marking lights at rear 1 x 15-pin socket + 1 x 15-pin coil cable at the front, detachable Approval / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, rear only, white Warning plate according to ECE-70 Paintwork Frame RAL 6031, bronze green matte Drawbar same color as frame Multiple units available

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21001013325, lastna masa: 2.500 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 11/2023, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 630 mm, skupna dolžina: 7.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: modra, The images shown are archive photos. The vehicle may still be in operation. Chassis – Central Axle Trailer, Low Loader Fine-grained steel welded construction Gear support foot in front Telescopic rear supports Wheel chocks with holder Mudguards made of sheet steel covering both wheels Side underrun protection made of aluminium Coupling device for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 250 mm Axles & Suspension Euro-axles of our choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" manufacturer's choice steel rims, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Please note: The trailer may only be towed by vehicles that ensure the ABS functionality! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at the front, with connecting cable, Bridge TTS Low-mounted steel trough, bridge floor covered with steel / chequer plate, steel walls solidly welded to the floor Bridge length: 5,500 mm Trough front and sides equipped with "Load-Lock profiles" for securing straps (8 units at the front, 16 units per side) Note: Slight floor waviness due to welding distortion possible! Pair of lashing rings, 1 x in the front corners of the steel trough and 1 x at the rear in the floor, each 5t Additional pair of lashing rings in the floor, each 5t Loading Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable Ledpfx Aozadb Doiceac with handrail on the ramps wooden surface (tips with steel / chequer plate) gas pressure springs for one-man operation Operating Notes The total weight stated is technically possible; depending on the cargo, the total permitted weight may not be attainable while observing legally permissible axle, support, and kingpin loads (Incorrect weight distribution may cause poor driving and tracking behavior) Registration/Country Plates Registration country: Germany With Dekra inspection and certificate (as per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides, red at the rear Paintwork Frame: RAL 5002 ultramarine blue Loading ramps: hot-dip galvanized The images shown are archive photos. The vehicle may still be in operation.

Stanje: rabljeno, največja dovoljena obremenitev: 28.933 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Edscha pomična streha * Haldex EBS, ABS, LSV * Dvižna os Laodpfxjvhvcfj Aicjc * Škatla za orodje * BPW Eco Plus osi z disk zavorami ----* Dimenzija pnevmatik: 385/55R19,5 * Skupna dolžina: 13.850 mm * Lastna masa: 6.067 kg * TÜV & SP: potekel -----Pridržujemo si pravico do napak in vmesne prodaje Številka vozila 5726 WhatsApp podpora na voljo! Za vprašanja glede vozila ali dodatne informacije nam pišite preko WhatsAppa Whatsapp Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 28.933 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Edscha pomična streha * Haldex EBS, ABS, LSV * Škatla za orodje * BPW Eco Plus osi z disk zavorami ----* Dimenzija pnevmatik: 385/55R19,5 * Skupna dolžina: 13.850 mm * Lastna teža: 6.097 kg * TÜV & SP: potekel -----Napake in vmesna prodaja pridržane Številka vozila 5732 Podpora prek WhatsApp na voljo! Ledpfx Aovhv H Roicsac Za vprašanja glede vozila ali dodatne informacije nas preprosto kontaktirajte prek WhatsApp

Stanje: rabljeno, največja dovoljena obremenitev: 15.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2017, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Leto izdelave: 2017, Oprema: ABS, Fliegl FLT 216 2-Axle Dolly First registration: 31-03-2017 2x BPW axles Air suspension Tyres: 385/55 R22.5 Approx. 30% Drum brakes with ABS and EBS Gross weight: 18,000 kg, Unladen weight: 2,380 kg, Payload: 13,620 kg Telescopic drawbar Minimum distance between fifth wheel and towing eye 420 cm, extendable by 80 cm up to 500 cm Fifth wheel height: approx. 115 cm Towing eye height: approx. 45-50 cm Hot-dip galvanized chassis Approved for NL Dolly Errors / typos and prior sale reserved. Ledpowbxtxefx Aicjac

Stanje: rabljeno, največja dovoljena obremenitev: 15.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2017, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Leto izdelave: 2017, Oprema: ABS, Fliegl FLT 216 2-Axle Dolly First registration: 31-03-2017 2x BPW axles Air suspension Tyres: 385/55 R22.5 Approx. 30% Drum brakes with ABS and EBS Gross weight: 18,000 kg, Unladen weight: 2,380 kg, Payload: 13,620 kg Telescopic drawbar Minimum distance between fifth wheel and towing eye 420 cm, extendable by 80 cm up to 500 cm Fifth wheel height: approx. 115 cm Towing eye height: approx. 45-50 cm Hot-dip galvanized chassis Approved for NL Dolly Lajdpfx Aijvv Anqscjc Errors / typos and prior sale reserved.

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm including rear bevel Additional information: plus delivery/preparation ex-stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Slightly sloped outer frame, new design with "Load-Lock profile" for securing lashing straps Pair of lashing eyes on the outer edge of flooring, each rated 5t: 1 x in the front corners, 1 x in front of and 1 x in the rear bevel 6 pairs of lashing eyes on the outer edge of floor/frame, each rated 5t Lsdpfeyl E Dqex Aicoac Gear support leg at front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear mud flap (not in conjunction with forklift mounting) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension: GFA or BPW axles as per manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical load compensation (rocker suspension) Brake System: 2-line compressed air brake system Colour-coded line routing for easy servicing Manual spindle parking brake 2 confusion-proof coupling heads at front, with connecting lines to tractor unit 24 volt ABS and ALB, ABS plug at the front with connecting cable Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality! Wheels and Tyres: 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front, LED 2 white/red lane marker lights at rear 2 x 7-pin confusion-proof connectors at front, with connection cable Floor: Steel/chequer plate flooring for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / front corner posts: 25 mm aluminium hollow section, 400 mm high Side walls: 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts: Without centre posts Rear wall / rear corner posts: 1 pair of steel posts mounted to the frame with provision for securing loading ramps, entrance width approx. 2,430 mm Loading ramps: Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With carrying handle on ramps Wooden covering (front end area in steel/chequer plate) With gas strut for one-man operation Operating information: The specified gross weight is technically achievable; however, depending on the type of load, the permitted gross weight may not be reached due to permissible axle/support/kingpin loads. (Poor driving and trailing behaviour due to incorrect load distribution possible) Registration country / plates: Germany With Dekra inspection and certification (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line registration plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork: Frame DB 7350 Novagrau Front wall aluminium Side walls anodised aluminium Loading ramps hot-dip galvanized

Stanje: novo, največja dovoljena obremenitev: 10.600 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross vehicle weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm incl. rear incline Width: 2,550 mm Loading height: 900 mm Additional information plus pre-carriage / provisioning from stock location 26639 Wiesmoor €1,280.00 / net - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consists of Chassis: central axle trailer Fine-grain steel welded construction Outer frame slightly inclined, new design with "Load-Lock profile" for lashing strap anchoring 6 pairs of lashing rings outside in the floor/outer frame, each 5t 3 pairs of lashing rings outside in the floor, each 5t 1 at the front corners, 1 before and 1 in the rear incline at the back Landing leg at the front Foldable rear support Wheel chocks with holder Steel underrun protection Rear spray flaps across total width (not in combination with forklift mounting) Quarter-round mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Central axle trailer coupling gear Drawbar with certified 40 mm drawbar eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & suspension Drum brake axles, manufacturer's choice "Axles & running gear laser aligned" – reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5" as per manufacturer Steel wheels in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to towing vehicle 24 volts EBS, electronic braking system with EBS plug at the front, with connection cable Notice: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable Floor Steel / chequer plate floor for high point load capacity Note: Slight floor rippling possible due to welding distortion! Lasdpfxjy Dzk So Aicec Platform length approx. 6,200 mm Rear incline approx. 900 mm Front bulkhead / corner stanchions 25 mm aluminium hollow profile, 400 mm high Sidewalls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame and with holder for securing the loading ramps, drive-on width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wooden overlay (tip area steel / chequer plate) gas pressure spring for single-person operation Operating instructions The indicated gross vehicle weight is technically feasible, but depending on cargo, the total weight may not be achievable while complying with the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior may occur due to improper load distribution) Special permit required if maximum train length exceeds 18,750 mm. Country-specific registration regulations must be observed. Country of registration / license plates Country of registration: Germany with Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline pre-installed for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white on sides, red at rear Paintwork Frame in DB 7350 Nova grey "10-year warran