Faymonville Plattform, Ausziehbar, Lenkachse, Tieflader, 15250Mm Lang nakup rabljenega (2.819)

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 Hedpfx Ajxtc Uheg Iofg - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: rabljeno, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/1996, dolžina tovornega prostora: 8.100 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna masa: 24.000 kg Lastna masa: 6.100 kg Nosilnost: 17.900 kg Skupna dolžina: 10.400 mm Dolžina nakladalne površine: skupno 8.100 mm, 6.000 mm vključno z zadnjim naklonom, 2.100 mm izrez Širina: skupna širina 2.550 mm / nakladalna širina 2.540 mm Višina nakladalne površine: 900 mm Dodatne informacije - Sklopna zadnja podpora - Opozorilne table - Dvojna kolesa 235/75R17,5 - SAF osi Hfodpfx Agew Rumxe Ijg - Hidravlične rampe - Stransko pomične rampe - Protizdrsni letve - Nakladalna površina z gumirano prevleko - Velik vezni paket - Zaščita pred udarci - Električno kolo - Izrez za roko bagra

Stanje: rabljeno, največja dovoljena obremenitev: 29.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2007, naslednji pregled (TÜV): 04/2026, Oprema: ABS, * 1091 - ID vozila za telefonske upite * Proizvođač: M&V, Tip: NPSL32 * Poluniska niskopodni prikolica sa labud vratom * ABS, EBS, BPW-Eco osovine, doboš kočnice, vazdušno ogibljenje, 1. osovina podizna osovina, 2. + 3. osovina sa hidrauličkim prinudnim upravljanjem, TRIDEC šasija, osovina sa daljinskim ručnim upravljanjem, centralno podmazivanje, šina za priključivanje ulaznih rampi * Zadnji deo pneumatski izvlačiv za 1,50 m * Vrlo dobro stanje, (prema prethodnom vlasniku pre oko 3 godine urađena nova podnica i generalni remont!) * tehnički dozvoljena ukupna masa: 41.000 kg * Pneumatici: 235/75R17,5 (9 mm) ----naša e-mail adresa:     naša usluga za Vas:       - Nabavka kratkoročnih ili carinskih tablica       - Prevoz / dostava širom EU Hfsdpfx Aeyt Alzjg Isg       - Carinjenje vozila za treće zemlje Ako imate pitanja na ruskom jeziku, možete pozvati sledeći broj * WhatsApp samo za govornike ruskog jezika: * WhatsApp za engleski, nemački i druge jezike:

Stanje: novo, Leto izdelave: 2026, Platform length 6000 mm Available from stock 84427 St. Wolfgang - Available immediately - Subject to prior sale - Container platform without side walls, with lashing eye rail Width 2500 mm Floor 5 mm made of S235 steel Subframe construction Subframe INP 180 UVV tested according to DIN 30722-1 (12,000 kg) C-lock: standard External rollers greaseable and replaceable Front wall Debr Sfoymlk Ho Ebaeki (untranslatable text) Height 1600 mm Hook height 1570 mm Front screw-on ladder according to DIN, RAL 3002 Carmine Red Special features Reinforced uptake bar 60 mm Lashing eye strip on both sides 2 x lashing rings in the front wall, lashing load each 3.5 t Rear Sloped ramp Paintwork Beboy A Iawjr Sf N Hpslg (untranslatable text) Primed inside and outside Exterior additionally synthetic resin paint RAL 7015 Slate Grey Tested according to DGUV 214-017 Suitable for trailers from Pronar, Krampe, Fliegl Available from stock 84427 St. Wolfgang Guobr Soyx Anbjf N Hpoa (untranslatable text) - Subject to prior sale - Hfodpfx Ajy Iwhneg Iog Payment terms: 100% before loading. Goods remain our property until full payment is received. Our General Terms and Conditions apply. Offer is non-binding, without guarantee or warranty. We would be pleased to provide you with a non-binding offer. You will find our complete product range at decker-containerbau

Stanje: novo, Leto izdelave: 2026, Platform length 6000 mm Available from stock 84427 St. Wolfgang - Immediately available - Subject to prior sale - Container platform without side walls, with lashing eye rail Width 2500 mm Floor 5 mm thick, made of S235 steel Subframe construction Subframe INP 180 UVV certified in accordance with DIN 30722-1 (12,000 kg) C-locking: Standard Outer rollers greaseable and replaceable Front wall Debr Sfoymlk Ho Ebaeki (untranslatable, possibly a typo or placeholder) Height 1600 mm Hook height 1570 mm Ksbr Sf Njyr Dt Do Hpolr (untranslatable, possibly a typo or placeholder) Removable ladder on rear side, bolted as per DIN, painted RAL 3002 Carmine Red Special features Reinforced support bracket, 60 mm Lashing eye rail on both sides 2 x lashing rings in front wall, each with 3.5 t lashing capacity Rear Beveled ramp Paintwork Hedpfxjy El Uws Ag Iefg Primed inside and outside Additionally, exterior coated with synthetic resin paint in RAL 7015 Slate Grey Tested as per DGUV 214-017 Suitable for trailers from Pronar, Krampe, Fliegl Available from stock 84427 St. Wolfgang - Subject to prior sale - Payment terms: 100% prepayment before loading. Goods remain our property until full payment has been received. Our General Terms and Conditions apply. Offer is non-binding, without warranty or guarantee. We would be happy to prepare a non-binding quotation for you. You will find our complete product range at decker-containerbau.

Stanje: novo, Leto izdelave: 2026, Platform length 5,500 mm Available from stock 94377 Steinach - Immediately available - Subject to prior sale - Hodpfx Asy A H Utsg Ijfg Container platform without side walls, with lashing eye strips Width 2,500 mm Floor 5 mm steel S235 Subframe construction Subframe INP 180 UVV tested according to DIN 30722-1 (12,000 kg) C-locking: Standard Outer rollers greaseable and replaceable Front wall Height 1,600 mm Hook height 1,570 mm Bobjydiyter Sf Ebajwh Front-mounted bolt-on ladder, DIN RAL 3002 Carmine Red Special equipment Reinforced lifting bracket 60 mm Lashing eye strip on both sides 2 x lashing rings in the front wall, lashing capacity per ring 3.5 t Rear Non-tapered ramp Paintwork Primed inside and outside Exterior additionally painted with synthetic resin paint in RAL 7015 Slate Grey Itobr Ssynzrief N Hpod Tested according to DGUV 214-017 Compatible with trailers from Pronar, Krampe, Fliegl Available ex stock 94377 Steinach - Subject to prior sale - Payment terms: 100% prepayment before loading. Rjbr Sf Ebjylhi Nsaop Goods remain our property until full payment is made. Our General Terms and Conditions apply. Offer is subject to change without obligation or warranty. We would be happy to provide you with a non-binding offer. You can find our complete product range at decker-containerbau

Stanje: rabljeno, največja dovoljena obremenitev: 14.240 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2026, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 21 m³, Oprema: ABS, • Double-T longitudinal and central beams as well as outer frame welded with cross members and outriggers • Multi Lock-Comfort outer frame, chamfered, with lashing holes every 100 mm, lashing possible even with closed sideboard • Rear underrun protection device according to EC Directive • For load compartment length: 7,100 mm (internal) • For load compartment width: 2,480 mm (internal) • Unloaded ride height approx.: 1,355 mm • Drawbar extendable from 1,800 - 2,400 mm (12 x 50 mm) Hfodsylf Txepfx Ag Isg • With 40 mm towing eye • 2 axles, each with 9,000 kg load capacity • BPW axles with air suspension and disc brakes (ET 120) • With lifting and lowering device, 2 valves • Krone Smart Tyre Monitoring according to ECE R141 • Monitoring of tyre pressure and temperature • Krone Connected TPMS control unit • Brake system: Wabco Premium • Multifunctional rear lights (full LED), manufacturer: Hella (Gen. 2) • Incl. 1 reversing light per tail lamp • 30 mm thick, waterproof-bonded panel floor, all cut surfaces sealed, strength according to EN 283, for floor loads up to 5,460 kg forklift axle load • Aluminium sideboards, 1,000 mm high, foldable/removable, tie rods, recessed folding steps in front and rear sideboards • 1 pair Kinnegrip centre stanchions • 1 sticker "Load Securing Tested" (EN 12642 XL) • Chassis including outer frame: RAL 9005 jet black • Axles including wheel hubs: RAL 9005 jet black • Underrun protection/lighting bracket: white powder-coated • Attachments: black or galvanized • Rims: natural silver • Side underrun protection: white powder-coated • Drawbar: RAL 9005 jet black • Rear corner stanchions: RAL 9010 pure white • Front wall: RAL 9010 pure white • Rear wall: RAL 9010 pure white • Centre stanchions: RAL 9010 pure white • Sideboards: RAL 9010 pure white • Front corner stanchion operating levers: RAL 9005 jet black • Colour deviations possible All information without guarantee / Subject to prior sale.

Stanje: rabljeno, prva registracija: 06/2001, Leto izdelave: 2001, Nooteboom MCO-48*SANH*Low loader*3x steering axles*hydraulic ramps* Very good condition!! ● ABS ● 3 x SAF air-suspended 10 t axles ● Lift/lowering system ● Drum brakes ● 3 x steering axles with rod / cylinder steering ● Hydraulic, 2-piece loading ramps ● Hydraulic adjustment (open / close) Hfedpfsyuty Esx Ag Iog ● Including 14 stakes for inserting into stake pockets ● NATO plug ● Loading length gooseneck: 3,230 mm ● Loading length platform: 9,270 mm ● Total loading area: 12,500 mm ● Extendable to 3 m ● Extendable warning signs ● Unladen weight: 11,080 kg ● GVW: 48,000 kg ● Payload: 36,920 kg ● Twin tires: 235/75 R17.5 ● Tire profile: 11/11 * 11/11 11/10 * 8/8 10/7 * 11/12 - TÜV / main inspection and safety inspection: !! new !! - German vehicle! Errors and prior sale excepted! = Further information = Contact Joannis Arpantzanis or Kai Bühler for further information.

Stanje: rabljeno, lastna masa: 4.040 kg, največja dovoljena obremenitev: 9.460 kg, skupna masa: 13.500 kg, prva registracija: 06/1994, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 7.800 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, prostornina tovornega prostora: 15 m³, vzmetenje: zrak, velikost pnevmatike: 215/75R17.5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 215/75R17.5, velikost zadnje pnevmatike: 215/75R17.5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Kontaktna oseba za prodajo: Frank Rau / rusko / angleško / nemško - Bachar Ibrahim / arabsko / angleško / nemško - Registracijska storitev, tehnični pregled/HU/SP/UVV, prevoz v pristanišče Sivo-črna Dodatki v opremi Hfsdoyk H Sgjpfx Ag Ieg ABS, zračna zavora, pripravljeno za vožnjo, zračno vzmetenje, cena na zahtevo (Mobile), vzmetenje: zrak, nosilnost (kg): 9460 Tip nadgradnje: Heinkel nizkopodne prikolica, 2 osi, rampe, zračno vzmetenje, pritrjevalci za kontejnerje, HSN/TSN: 0341/000 Nakladalna površina 7800 mm / nakladalna višina 800 mm Raztegljivi nosilec za luči za 1500 mm / do 10640 mm Pridržujemo si pravico do napak.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Additional Options and Accessories = - Spare wheel - Twin tires Hfodpfxoxw T Uas Ag Isg = Notes = Müller Mitteltal 2-axle T5 2AL low loader with ramps Air suspension BPW axles ABS ZSA Tires 60% tread, GR 235R17.5 ID No.: 665 We look forward to welcoming you for consultation, contract signing or vehicle collection at our dealership. Please arrange an appointment in advance. If you are unable to visit us in person, we offer complete processing via phone/email/WhatsApp/fax. On request, we deliver your new vehicle directly to your door. This means you get the best price, maximum security, and convenience when buying your vehicle. Trade-in We are happy to take your used vehicle in part exchange. We offer the possibility of digital vehicle valuation based on your photos, even without visiting our dealership. Our specialized purchasing team offers you a guaranteed top price. On request, we will deliver your new pre-owned vehicle nationwide right to your doorstep and take your old vehicle back with us. Financing – Leasing Immediate approval and settlement of existing loans. Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Visit us on our website Always over 400 vehicles in stock The information provided in advertisements, online, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may require separate verification; the offer is generally without new TÜV inspection, but we would be pleased to make you an offer through our partner workshop. Subject to errors and prior sale. = Additional Information = Unladen weight: 8,900 kg Payload: 26,100 kg Gross vehicle weight: 35,000 kg Sales price: €18,000, US$21,210

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) Hedpjl Tihuofx Ag Ijfg ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: Hfsdpfx Aexptn Deg Ieg * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: rabljeno, prevoženi kilometri: 937.000 km, prva registracija: 02/2018, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2018, = Additional Options and Equipment = - Air suspension = Notes = Hfjdpswmpk Esfx Ag Ijg DB 2532 LL 6x2 Standard chassis !! Long chassis, wheelbase: 5,200 mm !! • EURO 6 C • M cab with folding bunk/bed • Full air suspension • Automatic transmission • Automatic climate control • Stationary air conditioning • Intarder • ACC / adaptive cruise control • Emergency brake assist • Lane departure warning system • Reversing warning system • Hill start assist • Differential lock • ASR / can be deactivated • Automatic snow chains • Refrigerator • Auxiliary heater • On-board computer • Multifunction steering wheel • Fleetboard • Roof hatch • Comfort driver's seat • Comfort passenger seat, air-suspended with seat heating • 1 folding bunk/bed • Telephone • Sun visor • Air horn • 2 ALU tanks: 300 + 200 litres • Gross vehicle weight: 26,000 kg Tyres: • Front axle: 385/55 R22.5 • Drive axle: 315/70 R22.5 • Trailing/lift axle: 385/55 R22.5 • Tread depth: 7/7/3/3/3/3/7/9 mm • BÄR tail lift BC 1500 S4 without platform! • Frame length (body-mountable): 8,550 mm! - German vehicle! - 1 owner - TÜV / main inspection: new! Subject to errors and prior sale!

Stanje: novo, lastna masa: 12 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.150 mm, širina tovornega prostora: 2.950 mm, višina nakladalnega prostora: 950 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rdeča, Leto izdelave: 2012, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden; 3 axles; air suspension; first axle liftable; raise/lower function; ABS (anti-lock braking system); extendable width to 3.50 m; lashing rings; split loading ramps (2-part); hydraulic ramps; twin tyres. Hfodpfx Agji Rnh Ts Isg Approx. 8,500 mm loading length over axles; loading length over kingpin approx. 4,650 mm; 2-part hydraulic loading ramps (2,500 mm + 1,500 mm); extendable to 3.5 m; rear axle load (kg): 48,000 (3 x 16,000 kg); 18,000 kg fifth wheel load for 3-axle tractor unit. FOR EXPORT ONLY. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale and errors excepted!

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 6,300kg Payload: 17,700kg / 23,700kg Overall length: 10,900mm Loading length: total 8,600mm; 6,500mm including rear bevel; 2,100mm gooseneck Width: 2,550mm Loading height: 900mm Further information: - Heavy-duty welded construction made from high-strength fine grain steel - Hot-dip galvanized - Rear support - Twin wheels 235/75R17.5 - Warning panels - LED reversing lights - Lashing points on outer frame - Lashing rings: 4x gooseneck, 6x low bed (10,000 daN) - Single-piece hot-dip galvanized loading ramps (3,100mm x 750mm), 50mm softwood decking, laterally adjustable - Storage box in gooseneck - Plastic toolbox Hjdpfjwrv Sajx Ag Isfg - Bumper - Floor with 50mm softwood decking - Climbing strips on rear loading gradient

Stanje: novo, lastna masa: 3.780 kg, največja dovoljena obremenitev: 10.620 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, vzmetenje: jeklo, velikost pnevmatike: 215 /75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 215 /75 R 17,5, velikost zadnje pnevmatike: 215/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 400 mm side walls, chassis: hot-dip galvanized, wooden floor, 10 lashing rings, 2 ramps (2,500 mm x 500 mm), ramps with spring assist, twin tires: 8x 215/75 R 17.5, gearbox support winch with load and fast gear, front, 2 folding supports, rear, loading height loaded approx. 850 mm. -- Printing errors, mistakes, and changes excepted, sample images -- More data at: !, More details: ! Hfodpfx Asy Slytog Ijg

Stanje: novo, lastna masa: 3.780 kg, največja dovoljena obremenitev: 10.620 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, vzmetenje: jeklo, velikost pnevmatike: 215 /75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 215 /75 R 17,5, velikost zadnje pnevmatike: 215/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 400 mm side walls, chassis: hot-dip galvanized, wooden floor, 10 lashing rings, 2 ramps (2,500 mm x 500 mm), ramps with spring assist, twin tires: 8x 215/75 R 17.5, gearbox support winch with load and fast gear, front, 2 folding supports, rear, loading height loaded approx. 850 mm. -- Printing errors, mistakes, and changes excepted, sample images -- More data at: !, More details: ! Hjdpjy Izr Rjfx Ag Iefg

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment Hfedpfx Agey Iq Tdj Ijg - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: rabljeno, največja dovoljena obremenitev: 56.200 kg, skupna masa: 69.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/2021, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.625 mm, Leto izdelave: 2021, Oprema: ABS, FYAMONVILLE 4(2+2)-axle MULTIMAX low loader semi-trailer, air-suspended, with 2 self-steering trailing axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, 1st owner 4.1 m telescopic extension, fully hydraulic ramps and supports, wheel recesses, extensions, ALLOY WHEELS, FULL EQUIPMENT!!! Gooseneck: Gooseneck SNT design approx. 3.7 m, bevel approx. 1,000 mm x 10° Loading platform: Telescopic loading platform, approx. 8.8 m long, ramped at approx. 500 mm x 10° Excavator dipper recess approx. 2,490 x 750 x 210 mm Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually Axles and suspension: 4x BPW axles 12 t, 2 fixed, 2 trailing, self-steering axles Electromagnetic reverse gear lock + manual operation Air suspension with raise/lower valve Tyres: 235/75 R17.5 3PMSF MICHELIN / PIRELLI Load index: 143/141J (144/144F), new spare wheel 16x ALLOY WHEELS, POWDER-COATED WABCO brake system, EBS-E EU regulations 24-volt lighting system by ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets: 24N, 24S & 15-pin PAINTWORK Standard HRM metallization of outer frame Complete steel structure shot-blasted, ARC-ZINCED ZINACOR 850 (Zinc 85% - Alu 15%) hot finished Steel structure: Steel grades: * S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) * Welders certified to DIN-EN 287-1 * Welding process MAG according to EN ISO 4063 * Shielding gas M21 according to EN ISO 14175 Accessories: * Removable steel front wall, approx. 400 mm high * NATO socket + spiral cable * 3 kW electro-hydraulic power unit for hydraulic functions * Spare wheel bracket on the front wall * Mounting holes for bolt-on lashing rings * First hole approx. 200 mm from the front, then approx. every 400 mm Hfedpfxjy Iq Arj Ag Isg * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Mounting hole at the upper rear of the outer longitudinal member * 1 pair screw-in lashing rings (LC 10,000 daN) * Gooseneck with approx. 40 mm thick hardwood flooring * 1 pair removable aluminum side boards, aluminum rear board approx. 400 mm high, anodized * 2" kingpin * Guide plate on the gooseneck for the fifth wheel plate approx. 500 mm wide * 4 wheel chocks with bracket * Receptacles for ALU approach ramps * JOST mech. landing gear with 2-speed gearbox and crank * Continuous hardwood flooring, approx. 50 mm thick, interrupted between axles * Platform lock with conically welded locking profiles, 250 mm incl. pretension plate * Slots for insertable and repositionable bridging elements at the front of the platform * 1 intermediate table with offset platform, approx. 300 mm wide for the sliding tube * Front and rear with slots for insertable and repositionable bridging elements * Removable cover flush with the loading platform * Extensions extendable by approx. 230 mm per side * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm, in platform before 1st axle * Wheel recess covers split lengthwise, with wooden overlay, secured externally with locking pins * Wheel recesses with steel covering and 15 x 15 mm square climbing bars approx. every 200 mm * Between the 2nd and 3rd axle, in the platform, one pair of fixed wheel recesses * Rubber flooring "Super Grip" 25 mm and steel covering approx. 5 mm as additional reinforcement on the ramped section of the platform * Control valves for hydraulic ramps on the right an...

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YAFTL409100010512, Leto izdelave: 2010, For sale: Faymonville 4-axle semi-trailer (year 2010), extendable, in like-new condition. The vehicle has undergone a complete major overhaul performed by a specialized workshop and is ready for immediate use without any further interventions required. ✅ ADVANCED STEERING SYSTEM: Equipped with permanent hydraulic steering active both when driving forward and in reverse. Includes a wired remote control for manual axle steering during maneuvers. Hfsdpsy Ecltefx Ag Isg ✅ COMPLETE SANDBLASTING AND PAINTING: Chassis restored to as-new condition and fully protected. ✅ NEW DECKING: All floor boards and inserts have been newly replaced, never loaded since restoration. ✅ FULL MAINTENANCE: Mechanics, brakes, and hydraulic systems (ramps and steering) overhauled. ✅ READY FOR WORK: No further investment necessary, with routine inspection carried out as of 27/02/2026. TECHNICAL SPECIFICATIONS: Axles: 4 (1st liftable / 2nd-3rd-4th steering). Extendable: Single extension (+7.20 m). Total length up to 21 meters. Payload: 25,600 kg. Accessories: Double hydraulic ramps, front winch.

Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2015, dolžina tovornega prostora: 9.530 mm, širina tovornega prostora: 1.565 mm, višina nakladalnega prostora: 1.650 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, Oprema: ABS, Betonski notranji nakladač, nakladalna dolžina: 9530 mm, nakladalna širina: 1.565 mm, v nakladalnem prostoru kotni profili za sprejem palet, hidravlično varovanje tovora, po 6 obročev za pritrditev težkih bremen na vsaki strani, zunanji NATO zagonski priključek, ABS, EBS, BPW Eco os(i), bobnaste zavore, podstavki spredaj, vozilo je lahko polepljeno z reklamami in/ali označeno. SI86628 Naša ponudba je načeloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z reklamami in/ali označeno. Veljajo naši splošni pogoji dobave in plačila. Za ta objekt vam z veseljem pripravimo tudi ponudbo financiranja ali leasinga. Hsdpfjymu Iuex Ag Isfg Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2007, dolžina tovornega prostora: 9.550 mm, širina tovornega prostora: 1.570 mm, višina nakladalnega prostora: 1.650 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, Oprema: ABS, Notranji nakladalnik za beton, dolžina nakladanja: mm, širina nakladanja: 1.530 mm, v nakladalnem prostoru kotni profili za namestitev palet, hidravlično varovanje tovora, 5x pritrdilni obroči za težke obremenitve na vsaki strani, zunanja zagonska vtičnica NATO, ABS, EBS, BPW Eco os(i), bobnasta zavorna naprava, sprednje podporne noge, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Hfsdoymu Injpfx Ag Isg SI86625 Naša ponudba je praviloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo financiranja ali leasinga. Prosimo, kontaktirajte nas!

Stanje: rabljeno, lastna masa: 11.550 kg, največja dovoljena obremenitev: 30.450 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 700 mm, prostornina tovornega prostora: 23 m³, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2018, vrsta prenosa: mehanski, Oprema: ABS, Lastna masa: 11.550 kg, dovoljena skupna masa: 42.000 kg, tovorni prostor (D Š V): 13.450 mm x 2.540 mm x 700 mm, volumen tovornega prostora: 23 m³, zračno vzmetenje, dvižna os: 1. os, elektronski zavorni sistem EBS, sledilno krmiljenje: 3. os, dvojna montaža pnevmatik, minimalna dolžina 13,45 m, maksimalna dolžina 18,20 m, lastna masa 11.550 kg, obremenitev sedla 18.000 kg, skupna masa 48.000 kg, izjemno dovoljenje DE, izvlečno, hidravlične nastavljive rampe, 3. os prisilno vodena, dvojne pnevmatike 235/75R17,5, vitel, tehnični pregled do 01-2027, YAMT13XXXJ0102830, Nezavezujoča ponudba, napake in vmesna prodaja pridržane. Slika ni nujno enaka ponudbi. Hjdoy Dng Tspfx Ag Ijfg

Stanje: rabljeno, največja dovoljena obremenitev: 14.250 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2026, dolžina tovornega prostora: 6.900 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 20 m³, Oprema: ABS, • Double-T longitudinal and central beams as well as outer frame with cross members and outriggers, fully welded • Multi Lock-Comfort outer frame, chamfered, with lashing holes every 100 mm – lashing possible even with side walls closed • Rear underrun protection in accordance with EU directive • Suitable for loading area length: 6,900 mm (internal) • Suitable for loading area width: 2,480 mm (internal) • Unladen ride height approx.: 1,355 mm • Extendable drawbar from 1,800 to 2,400 mm (12 x 50 mm) • With 40 mm towing eye • 2 axles, each with 9,000 kg load capacity • BPW axles with air suspension and disc brakes (ET 120) Hfjdpfjylf Tlsx Ag Isg • With lifting and lowering system, 2 valves • Krone Smart Tyre Monitoring according to ECE R141 • Measurement of tyre pressure and temperature • Krone Connected TPMS control unit • Brake system: Wabco Premium • Multifunction LED rear lights, manufacturer Hella (Gen. 2) • Incl. 1 reversing light per rear light • 30 mm thick, waterproof bonded plywood floor, all cut edges sealed, strength according to EN 283, for floor loads up to 5,460 kg forklift axle load • LM side walls 1,000 mm high, foldable/removable, tie-down rings, recessed folding steps in front and rear side wall • 1 pair of Kinnegrip centre stanchions • 1 sticker “Certified load securing” (EN 12642 XL) • Chassis including outer frame: RAL 9005 deep black • Axles including wheel hubs: RAL 9005 deep black • Underrun protection/lighting carrier: white powder-coated • Attachments: black or galvanised • Rims: natural silver • Lateral underrun protection: white powder-coated • Drawbar: RAL 9005 deep black • Rear corner stanchions: RAL 9010 pure white • Front wall: RAL 9010 pure white • Rear wall: RAL 9010 pure white • Centre stanchions: RAL 9010 pure white • Side walls: RAL 9010 pure white • Operating levers for front corner stanchions: RAL 9005 deep black • Colour deviations possible All specifications subject to change without notice / prior sale reserved.

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.500 kg, dovoljena osna obremenitev (os 2): 12.500 kg, dovoljena osna obremenitev (os 3): 12.500 kg, prva registracija: 07/2000, skupna dolžina: 15.410 mm, skupna širina: 2.540 mm, skupna višina: 890 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, stanje pnevmatik: 50 odstotek, medosna razdalja: 12.460 mm, barva: drugo, Leto izdelave: 2000, Oprema: ABS, dvižna zadnja plošča, = Druge možnosti in dodatki = - 4 OSI - Zadnja loputa - Hidravlika - Zračno vzmetenje - Krmiljena os = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70 R17.5 Hfjdoy Rax Ujpfx Ag Isg Znamka osi: SAF Zavore: bobnaste zavore Zadnja os 1: dvojna guma; Največja osna obremenitev: 12.500 kg; Profil pnevmatik: 50% Zadnja os 2: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 60% Zadnja os 3: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 70% Zadnja os 4: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 30% Teže Lastna teža: 12.800 kg Nosilnost: 68.450 kg Skupna dovoljena masa: 81.250 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: dobro Identifikacija Registrska številka: ZZ-98-52