Dinkel 4-Achs-Jumbotieflader - Doppelte Rampen nakup rabljenega (40.180)

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group Bwjdsylfvmspfx Abpjp * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection Bodpsylfvgofx Abpewp ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps Bwodswh Hdxepfx Abpep * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2020, dolžina tovornega prostora: 5.750 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 900 mm, medosna razdalja: 1.000 mm, vrsta prenosa: drugo, voznikova kabina: drugo, zavore: drugo, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and split loading platform * Front section with mesh extension, electrically tiltable on both sides * Behind: flatbed/platform/low loader with loading ramps * Large flatbed loading area with phenolic plywood floor and DIN lashing eyes * Ideal for landscaping, construction industry, and much more * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m, aluminium loading side panels * Payload: 2,230 kg * Tipping area dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping drive with cable remote control Bwjdpfexnqv Asx Abpep * 100 km/h approval * Tipper bed with steel floor * Tridem axles * GVW: 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that there are no misunderstandings regarding their condition and suitability. Inspection and viewing are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2021, skupna širina: 3.000 mm, skupna višina: 3.760 mm, Oprema: ABS, * Own hydraulic power unit * Hydraulically movable loading ramps * 4 hydraulic additional supports * Hydraulically extendable lowbed (3,000 mm) * Expandable loading platform (500 mm) * AXION radio system with remote control * Gooseneck with side walls & storage box * Hydraulically steered axles ----* Wabco Trailer EBS-E system * SAF axles with drum brakes Bedpjzbw N Rsfx Abpowp * Wabco SmartBoard unit * Height-adjustable lowbed * Reversing camera * Telematics ----The following maintenance was performed in February by ES-GE Nutzfahrzeuge: * Brake drums, brake shoes + linings, brake cams, bushings & slack adjusters replaced on all 4 axles * Tie rod ends replaced * Suspension mounting on TwinAxle II replaced * Electrical system lighting repaired * Hydraulic accumulator replaced * EBS system serviced * Electric pump checked * Hydraulic oil and filter replaced * Axle play checked * Central lubrication system checked * Suspension levers repaired * Height control sensors serviced * Front junction box repaired * Wooden floor repaired * Cover plates repaired * Air tanks re-fixed * Wheel bearings checked ----* Tire size: 245/70R17.5 * Technical gross weight: 73,000 kg * Unladen weight: 14,600 kg * Overall length: 13,200 - 16,200 mm * Overall width: 2,540 - 3,000 mm * Mileage: 194,000 km * Next safety inspection due: 09.2026 ----Vehicle number: 12154----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.-----We are happy to assist you with all formalities related to vehicle purchase. Simply share your wishes and suggestions and we will take care of the rest. Among other things, we can offer the following services at an additional cost:----Trade-in of your current vehicle TÜV/safety inspection Complete export handling Financing arrangement Application for export license plates Vehicle transport & transfer Vehicle registration Vehicle recovery and transport---- YOUR VTS TEAM

Stanje: rabljeno, lastna masa: 22.900 kg, največja dovoljena obremenitev: 41.100 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2009, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 70 odstotek, barva: zelen, Leto izdelave: 2009, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 40194 Goldhofer, STZ-VL4-42/80A * Year of manufacture: 2009 * ABS, anti-lock braking system * Air suspension * Steering axle * Air coupling head (red + yellow) * Spare wheel carrier with spare wheel * Wiring connector 2x7 pin * Lift and lower function * Widenable * Extendable/telescopic – telescopic semi-trailer * Heavy-duty lashing eyes * Suspension: air * Gross weight: 64,000 kg * Unladen weight: 22,900 kg * Payload: 41,100 kg * Permissible total weight: 64,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 70% -- 70% - Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 70% -- 70% - Tire size: 235/75 R17.5 * Tire condition, 3rd axle: 70% -- 70% - Tire size: 235/75 R17.5 * Tire condition, 4th axle: 70% -- 70% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Telescopic extension: approx. 4000mm * Deck height above axles: approx. 1000mm * Deck height above ground: approx. 360mm * Can be widened to 3200mm * Removable gooseneck Liability disclaimer: Specifications subject to change without notice. Errors and prior sale excepted. You will find more photos and videos on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Processing all (export) documents * Order export registration plates / customs plates Bwjdsyict Uspfx Abpop * Vehicle preparation: new tarpaulins, graphics, paintwork etc. * Professional loading and cargo securing * Technical inspection (TÜV), registration services * Transfer and delivery of commercial vehicles Please contact our trained specialist staff, who will be happy to assist you.

Stanje: rabljeno, lastna masa: 8.650 kg, največja dovoljena obremenitev: 31.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2012, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 4.725 mm, barva: oranžna, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: oranžna Bwodpoyuu Ikefx Abpsp Dodatna oprema ABS, vzmetenje: listnate vzmeti, nosilnost (kg): 31.350 Tip nadgradnje: Goldhofer 4-osni nizkopodni priklopnik T4-2x2-32/80, BPW ECO osi z listnatimi vzmetmi, razširitve, nakladalna površina ca. 7.000 x 2.550 mm, nakladalna višina ca. 860 mm, mehanska zadnja opora, hidravlične dvižne rampe 2.850 x 700 mm, hidravlični bočni pomik, vlečna ojnica z vlečno uho 50 mm, zračni priključek Duomatik, elektrika 24 V - 2 x 7-polno, ABS

Stanje: rabljeno, prevoženi kilometri: 168.812 km, moč: 353 kW (479,95 KM), prva registracija: 01/2014, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 07/2026, barva: zlato, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, navigacijski sistem, * 3399 - ID for telephone inquiries * JL body * Automatic transmission, retarder, air conditioning, multifunction steering wheel, center armrest, 2x heated leather comfort seats, electric windows, radio, navigation, tow bar, steering axle, walk-through, full air suspension * Topsleeper, 5 berths, seating area, microwave, refrigerator, hob, bed above shower, 2x TV, shower, toilet, washbasin, overhead storage compartments * For 5 horses, all horses can be unloaded individually, stallion partition, 4 side ramps, ramp limiters, window in the horse area, camera in the horse compartment, roof hatches, saddle and bridle holders, walk-in tack room with ramps and electric winch for saddle cabinet * If you have any questions, feel free to contact us! * We accept trucks, construction machinery etc. in part exchange ----Our email address: Our service for you: - Arrangement of short-term or export license plates - EU-wide delivery/transport - Customs clearance for vehicles exported to non-EU countries If you have questions in Russian, you can call the following number* Bsdpsygdyasfx Abpswp WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Bwsdpfx Abjvv D Ixspjp Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: Bodpfx Abjxrx Nlepjwp 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Bedpfxerducpo Abpewp Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Ponudba finančnega najema: trajanje 48 mesecev, polog samo DDV, preostala vrednost 40% mesečna rata 540,00 EUR (plačilo le neto znesek) Skupna masa: 24.000 kg / 30.000 kg Lastna masa: 6.300 kg Nosilnost: 17.700 kg / 23.700 kg Skupna dolžina: 10.900 mm Nakladalna dolžina: skupno 8.600 mm, 6.500 mm vključno z zadnjim naklonom, 2.100 mm višina krivine Širina: 2.550 mm Nakladalna višina: 900 mm Dodatne informacije - Močna varjena konstrukcija iz visoko trdnostnega finega zrnatega jekla - vroče pocinkano - zadnja podpora - dvojne pnevmatike 235/75R17,5 - opozorilne table - LED vzvratne luči Bjdjwrv Saopfx Abpowp - pritrdilne točke na zunanjem okviru - pritrdilne ušesce 4x krivine, 6x globoka ležišča (10000 daN) - enodelne vroče pocinkane nakladalne rampe (3100 mm x 750 mm) s 50 mm mehkim lesnim podom, bočno pomične - shrambna škatla v krivini - plastična orodjarna - zaščita pred naletom - 50 mm mehka lesena tla - zadnji plezalni letvi nakladalne rampe Vozilo ima enodnevno registracijo junija 2026.

Stanje: rabljeno, lastna masa: 29.600 kg, največja dovoljena obremenitev: 72.400 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2025, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Gooseneck: Bwodpfezauvrsx Abpep - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front running gear: - Hook attachment front and rear - Frame length x frame width approx. 2,200 mm x 2,850 mm Excavator deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over bridge hooks at the front and bolt-lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-axle rear running gear: - Mechanical bolt-lug coupling at the front for mounting a lowbed, end cross-member at the rear - Frame length x frame width approx. 5,480 mm x 2,850 mm Pendulum axle and tires (front and rear running gear): - “PENDEL-AXLE”, all axles hydromechanically force-steered - Burst hose valve on the axle equalization cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety pins to secure in raised position - Axles top-coated with 2-layer 2-component paint, single-color MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle equalization - Tires 285/70 R19.5 Remote steering: - Remote steering from front and rear, operable by cable remote via push-buttons, with axle alignment monitoring - Socket for operating remote steering at gooseneck - Cable remote with push-buttons including axle alignment monitoring Accessories included: - Galvanized connection bar at the front with yellow-red air couplings - Steel front wall approx. 400 mm high - 4 chocks - 3.5" king pin - One 7-pin socket on left and right rear of gooseneck for warning board - Boom with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including boom for supply line suspension, tractor unit tank must have at least 80 liters capacity with couplings - Plug-in ALU drop sides and rear wall for gooseneck, approx. 400 mm high, anodized - Operating lever on gooseneck protected by a folding cover - Separate air connection with air gun on the gooseneck - BEKAMAX central lubrication system with standard grease NLGI-2, 1x at gooseneck, 1x at 2-axle running gear, and 1x at 4-axle running gear - Variomax tool kit - Multi-coupling hydraulic connectors at gooseneck and in the area of the lowbed hook attachment - 2 spare wheels - Front running gear with a separate air connection for air impact wrench - Folding extensions with steel floor plates, width adjustable from approx. 2,850 mm to 3,250 mm - Steel plates can be inserted into 2 positions to obtain a lowered loading deck - Steel plates with rubber surface approx. 12 mm thick - Threaded inserts (⌀ 40 mm) every approx. 500 mm outside on the top flange of the excavator deck’s outer tube for screw rings - 2 stainless steel toolboxes approx. 855 x 340 x 390 mm left + right on the gooseneck - Radio remote control for remote steering in addition to cable remote - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery - Steel plates adjustable in width from 2,850 mm to 3,250 mm and insertable in 2 positions for a lowered loading deck - 4 pairs of steel plates with rubber surface approx. 12 mm thick - Maximum 3,500 mm extendable tube coverable, in 500 mm increments - Lowbed central beam provided with a painted-on sand layer as anti-slip protection - Extensive lashing points

Stanje: rabljeno, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, For every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front cranked frame and flat loading area, inclined at the rear approx. 500x100 mm - Frame neck 200 mm with chamfered corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the rear sloped area) - 2 kingpin settings with replaceable 2" kingpin - Outer frame closed outward as perforated external frame for lashing with tension straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Provisions for extendable load floor widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of the axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece special-design loading ramps, mechanically extendable - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lift (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wood surface - Incl. traction ribs on loading ramps - Can be secured in driving position with tension straps - Actuated via control lever mounted to the right at rear in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch wooden floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears with one-side operation and push rod compensation Axles, Steering and Tyres: - BPW air suspension axles, each 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower mechanism with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic control with mechanical emergency operation via button on the trailer - 3rd axle self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side and rear walls approx. 400 mm high on gooseneck - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in end plate - 1 ECE-board insertable at the rear - 11 pairs of ZK modules 10t laterally: Bedpjzabnbjfx Abpjwp - 2x on the gooseneck - 9x on the loading area - Extendable warning signs incl. 3 position lights each, at front on landing gears and rear before end plate, infinitely extendable up to loading width of 4,500 mm - 4 fittings for warning signs, plug-in to pockets on loading area - 6 pairs of stake pockets at sides for stakes 100x50 mm - 2 rows of crosswise stake pockets for stakes 100x50 mm on gooseneck from outer frame inwards up to main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for stakes 100x50 mm on load area from outer frame inwards up to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber skirt mounted on underrun protection

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile: ----Braking System: * EBS (electronic braking system) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve Bedpfxoxptn Rs Abpjwp ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle ----Electrical / Lighting: * Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display) * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud skirts with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low Loader Platform: * Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams) ----Load Securing (La-Si package consisting of): * 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier * 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets on each side, each with 2 t lashing capacity * Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way control block for future retrofit of hydraulic ramp lateral adjustment ----Excavator Arm Rest: * Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, and drawbar painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, prevoženi kilometri: 211.033 km, moč: 331 kW (450,03 KM), prva registracija: 03/2016, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 04/2027, zavore: retarder, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 14 m³, dolžina tovornega prostora: 5.600 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.050 mm, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, * Sun visor * ABS (Anti-lock Braking System) * TCS (Traction Control System) * Radio * Navigation system * On-board computer * Reversing camera * Cruise control * Air horns * Power windows * Electrically adjustable mirrors * Heated mirrors * Central locking * Fog lights * Roof hatch * Rear window * Driver comfort seat * Seat heating * Longitudinal and transverse differential locks * AP axles (hub reduction axles) * Steel bumper * Amber rotating beacon * Exhaust behind driver’s cab * Foldable underrun protection * Auxiliary heater / parking heater * Hill-start assist Bwodpoy Tq Tuefx Abpep * Cool box * Shunting coupling * 12-speed * Suspension: leaf spring * Payload: 18,060 kg * Continuous brake: retarder --- Superstructure: Dautel 3-way pallet tipper body type DK 4 (nominal load 24,500 kg), steel sideboard left with Bordmatik, reinforced front panel with excavator protection, steel rear wall, discharge chute at rear, steel floor, lashing eyes, aluminium sideboard right. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see Legal Notice) form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales discussions.

Stanje: rabljeno, prevoženi kilometri: 211.033 km, moč: 331 kW (450,03 KM), prva registracija: 03/2016, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 04/2027, zavore: retarder, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 14 m³, dolžina tovornega prostora: 5.600 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.050 mm, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, * Sun visor * ABS * TCS Traction Control System * Radio * Navigation system * On-board computer * Reversing camera * Cruise control * Air horns * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Roof hatch * Rear window * Driver comfort seat * Seat heating * Longitudinal and transverse differential locks * AP axles * Steel bumper * Rotating beacon orange * Exhaust behind the cab * Foldable underride guard * Auxiliary heater * Hill start assist * Cool box * Shunting jaw * 12-speed * Suspension: leaf springs * Payload: 18,060 kg * Permanent brake: retarder ----Body: Dautel 3-way tipper body for pallets type DK 4 (rated load 24,500 kg), left steel side wall with Bordmatik, raised steel front wall with excavator protection, steel tailgate, chute at rear, steel floor, lashing eyes, right aluminium side wall. Bwjdpfx Ajy Tq Tzjbpjp Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. All contracts of sale, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see Imprint).

Stanje: rabljeno, številka stroja/vozila: W09SKS27BG7S11262, konfiguracija osi: 3 osi, Leto izdelave: 2016, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj = Dodatne informacije = Teže Nosilnost: 46.450 kg Dovoljena skupna masa: 8.020 kg Stanje Splošno stanje: povprečno Bedpjzclb Djfx Abpowp Tehnično stanje: povprečno Vizualno stanje: povprečno Dodatne informacije Stanje pnevmatik spredaj: 20% Stanje pnevmatik zadaj: 20% Pnevmatike spredaj: 385/65 R 22.5 Pnevmatike zadaj: 385/65 R 22.5 Zadnji pregled: 2026-06-04 Dodatne informacije Za več informacij kontaktirajte Lastas Sales.

Stanje: rabljeno, prevoženi kilometri: 195.597 km, moč: 316 kW (429,64 KM), prva registracija: 05/2020, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 05/2026, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 13 m³, dolžina tovornega prostora: 5.600 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, * Sun visor * ABS * Parking heater * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Heated mirrors * Fog lights * Rear window * Driver comfort seat * Seat heating * Longitudinal and transverse differential locks * AP axles * Steel bumper * Rotating orange beacon * High-mounted air intake * Air dryer * Folding underride guard * Lane departure warning system * Right turn assist system * Radio * Navigation system * Rear-view camera * Roof hatch Bsdoy R Ixvopfx Abpowp * Cool box * HydroDrive front axle drive * Steering brake * Paver brake * 12-speed * Suspension: leaf springs * Payload: 17,870 kg * Continuous brake: electronically controlled engine brake ---- Body: Carnehl three-way steel pallet tipper body, Jet side walls, Cramaro electric sliding tarp with remote control. ---- Exceptionally well-maintained tipper in original condition! Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT & ACCESSORIES. The basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions is our General Terms and Conditions (see Imprint).

Stanje: rabljeno, prevoženi kilometri: 509.030 km, moč: 265 kW (360,30 KM), prva registracija: 12/2007, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 05/2026, barva: rumena, emisijski razred: Euro 4, skupna širina: 2.550 mm, skupna višina: 3.650 mm, Leto izdelave: 2007, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, navigacijski sistem, parkirni grelec, COMING SOON!! The vehicle is still in transit. Further data and photos will follow shortly. Cab & Comfort * Cab: High-roof 'LX', 2240 mm wide, 2280 mm long * Seats: Comfort driver's seat (air-sprung, lumbar support, shoulder adjustment, heated), co-driver's seat longitudinally and backrest adjustable * Air conditioning: AC R134A, automatic temperature control * Auxiliary air heater: EBERSPÄCHER D4S * Sleeper berth: 1x with storage compartment, lower mattress, pillow * Electric windows * Central locking * Instrument cluster km/h 'High-Line' * MAN Tronic (on-board computer) with multifunction steering wheel * Cruise control * Speed limiter 85 km/h * Radio BLAUPUNKT DX-R4 with navigation * Reversing camera system with external monitor * Navigation CD Germany * GPS/phone antenna * PARROT hands-free kit * Voice control (German) * Cool box ---- Lighting & Visibility * Halogen twin headlights H7 * Additional high beam and fog lights * Amber revolving beacons * Electric sliding/tilting sunroof * Sun roller blind * Sun visor ---- Safety * ABS, ASR * Digital axle load display * Disc brakes front and rear * ABS, ASR * MAN BrakeMatic (electronic brake system) * Emergency steering pump, steering lock with immobilizer * Hill start aid * Spray suppression system ---- Engine & Transmission * Engine: D2066LF33, 360 HP (265 kW), EURO 4, 1800 Nm, Common rail, OBD * Transmission: MAN TipMatic® 12 21 DD (automatic) * 2nd axle steerable * Tag axle: 7,100 kg, steerable and liftable * Leaf/air suspension * Rear differential lock Bwedpfx Asy T Uitobpep * ECAS air suspension system ---- Bodywork * Hydraulic loading ramps (split, 2-piece) * Cable winch * Storage boxes * Ball-type tow hitch * Front axle tyre size: 385/55R22.5 * Rear axle tyre size: 315/60R22.5 * Fuel tank: 400 l * Gross vehicle weight: 34,000 kg * Unladen weight: 13,750 kg * Overall length: 11,900 mm * Wheelbase: 1,795 mm * Periodic inspection due: 11.2026 ---- Vehicle number: 12113 ---- Subject to errors and prior sale ---- Advertising and various decals have been digitally removed. ---- We are happy to assist you with all formalities associated with the purchase of a vehicle. Simply let us know your requests and suggestions and we will handle the rest. Among other things, we can offer you the following services for an additional charge: - Trade-in of your used vehicle - TÜV/Periodic inspection - Complete export processing - Financing mediation - Application for export license plates - Vehicle transport and transfer - Vehicle registration - Recovery and vehicle transport

Stanje: rabljeno, skupna masa: 40.000 kg, prva registracija: 04/2009, Schwarzmüller G404 Bsdeyrdhhopfx Abpswp Lastna teža 8.580 kg Skupna masa 40.000 kg Mehanske rampe Listnate vzmeti Pridržujemo si pravico do napak in tipkarskih napak!

Stanje: novo, lastna masa: 9.600 kg, največja dovoljena obremenitev: 53.400 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: siv, Oprema: ABS, Platform area: - Platform with approx. 30 mm thick hardwood flooring - 10 pairs of folding lash rings (outward folding) Landing legs: - JOST landing legs with 2-speed gearbox, 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg per axle; first axle fixed, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise/lower valve - Axle tools included - Tyres: 385/65 R22.5 Braking system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrical system: - Electrical system according to EU regulations, 24 Volt lighting - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S and 15-pin sockets - Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component zinc-dust primer - High-quality 2-component topcoat, single-colour in Nova Grey - Rear section metallized and painted in RAL 9010 Accessories included: - Platform with approx. 30 mm thick hardwood flooring - 2" king pin - One galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks with holders on the front wall - Storage for 1,000 mm plug-in stanchions in the rear central beam - On the gooseneck and rear panel, left and right, a mounting bracket for warning signs with socket - Remote steering from front and rear, operated via cable remote control with push-buttons; with axle tracking control - Electro-hydraulic power pack - White reflective tape as per EU regulations along the side of the trailer, red at rear - 12 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load bed - European reflective plates at the trailer rear - One bracket for a rotary beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable protector for the pump - TPMS tyre pressure monitoring system: - The towing vehicle must be capable of transmitting and displaying these data for correct readout - Lift axle on the front axle, automatically controlled by TEBS E in accordance with current axle load and trailer loading status - Radio remote control for the remote steering in addition to the cable remote, with indicator lamps on the receiver for axle tracking control - 5 pairs of crosswise stanchion pocket strips on the bed for 100 x 50 mm plug-in stanchions Bwedpfx Abjrq Dlfepjp - 80 km/h speed stickers at rear and both sides - Adjustable access ladder mounted left and right in direction of travel - 2 reversing lights mounted at the rear panel - Load gauge for determining axle loads, including load diagram - HRM metallization of the outer frame: complete steel structure shot-blasted, then all designated visible areas hot metalized with ZINACOR 850 (Zinc 85% - Aluminum 15%)

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) Bwsdpfx Ael Sl Izebpsp S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Bsdpfxjhlz S Ne Abpewp Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Bedpjwviwkofx Abpjwp Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey