Lecitrailer Polpriklopnik Z Zavesami nakup rabljenega (37.315)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 16.300 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2018, vzmetenje: drugo, velikost pnevmatike: 205/65 R 17,5, barva: zelen, Oprema: ABS, EBS (Elektronski zavorni sistem), - 5 osi: 1. os vodena s trenjem in dvižna; 2.-5. os hidravlično vodene - Raztegljivo: 6.200 mm (skupna dolžina: 12.800 mm - 19.000 mm) - SAF osi - Premične hidravlične dvojne rampe z nosilnimi nogami - Dvižni in spustni sistem - Bobnaste zavore Pjdpfxoymnmwj Aphora - Vzmetenje: zračno-lift Pridržujemo si pravico do napak

Stanje: rabljeno, prva registracija: 03/2013, barva: sivo-črna, Leto izdelave: 2013, vrsta prenosa: drugo, REGISTRACIJA: XA020AJ NASLOV: POLPRIKOLICA TECNOKAR ZA ODSTRANLJIVE KONTEJNERJE Z ŽERJAVOM ŠTEVILKA: 25R14 LETNIK: 03/2013 OSI: 3 MAKSIMALNA DOLŽINA: 9,60 m DOMA/TUI: Italija NOSILNOST: 25900 kg - POLPRIKOLICA: 38000 kg pri polni obremenitvi VRSTA NADGRADNJE: za odstranljive kontejnerje MODEL NADGRADNJE: HYVALIFT 30.67 SK IZVLEČNI MEHANIZEM: da ŽERJAV: da VALJ: vgrajen ADR: ne MOŽNOST VOŽNJE POD ODPADNIM VOZILOM: OD: 5,00 m + 0,20 m DO: 7,60 m + 0,20 m VZMETENJE: zračno ZAVORE: diskovne PNEVMATIKE: 385/65 R.22.5 OPREMA: - žerjav PENZ 15ZRT8.50, zložljiv, letnik 2012, 1 iztegnjeni segment na prvem ročnem delu in 2 iztegnjena segmenta na drugem ročnem delu - ročica - klešče GUSELLA SHZ305/K/0 s 6 lopatami, letnik 2012, nosilnost 300 l, teža 428 kg z vgrajenim rotatorjem PREDELAN: ne PREVERJEN: ne STANE PNEVMATIK: 40 % Pridržujemo si pravico do sprememb in/ali napak Navedene cene ne vključujejo DDV. Prosimo, kontaktirajte prodajalca za posodobljeno primerjavo cen in pogojev. Prsdpfx Aex Twfqjphja Za več informacij: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SCARRABILI deluje na področju prodaje in nakupa industrijskih in gospodarskih vozil, specializirana predvsem za področje ravnanja z odpadki. Specializirani za tovornjake, prikolice in opremo za odstranljive kontejnerje. Razpolagajo s parkom vozil, ki so na voljo takoj, z več kot 50 tovornjaki in več kot 150 nadgradnjami, kontejnerji z in brez žerjavov za odstranljive kontejnerje. S.E.&O Glede na količino objav in podrobnosti, Aurora priporoča, da uporabniki preverijo pravilnost podatkov pri prodajnem osebju.

Stanje: rabljeno, lastna masa: 5.580 kg, največja dovoljena obremenitev: 30.420 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1988, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, skupna dolžina: 12.800 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 9.5R17.5, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden, 2 axles, pallet box, twin tires Predpfxji Rnu Ue Aphja Body: Ideal showman trailer, Zorzi axles, loading area above axles 9,000 mm, loading area above kingpin 3,700 mm, 3x Zorzi axles, approx. €3,000 recently invested in brakes and axles! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WGOSTZH5740027600, lastna masa: 15.000 kg, največja dovoljena obremenitev: 64.000 kg, skupna masa: 80.000 kg, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, dolžina tovornega prostora: 18.000 mm, širina tovornega prostora: 3.000 mm, prostornina tovornega prostora: 15 m³, skupna dolžina: 16.715 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, vzmetenje: hidravlika, velikost pnevmatike: 235, stanje pnevmatik: 90 odstotek, medosna razdalja: 1.320 mm, največja hitrost: 80 km/h, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2024, Oprema: ABS, dvižna zadnja plošča, nalagalnik, oporno kolo, osrednja vrtljiva plošča, močna prikolica s petimi osmi in nizko nosilno konstrukcijo (prikolica z nizko platformo); razširljiva prikolica z dvojnimi hidravličnimi rampami. Pedozuc Udopfx Aphora

Stanje: rabljeno, največja dovoljena obremenitev: 66.600 kg, skupna masa: 96.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2011, STHP-XLE 2+4 (285) z vrtljivimi osmi Teže Hitrost 80 km/h Obremenitev sedla 24.000 kg Obremenitev osi 6 x 12.000 kg Dovoljena skupna masa 96.000 kg Lastna masa približno 29.400 kg Nosilnost približno 66.600 kg Gooseneck (swan neck) dolžina x širina 3.755 mm x 2.480 mm, višina sedla (obremenjeno) 1.300 mm, polmer gibanja spredaj/zadaj 1.280 mm / 2.600 mm, kraljevi čep 3,5''. Obremenitev sedla 24.000 kg Dvooksna podvozna konstrukcija spredaj, enojna pnevmatika 285/70 R 19,5, z BPW vrtljivimi osmi 12-14 t, obremenitev osi. Krmiljenje: nasprotno krmiljenje osi. Dolžina 2577 mm. Ploščata prikolica, enostavno teleskopska z ločilno točko zadaj. Dolžina x širina 6.500 mm x 2.750 mm, širitev na 3.190 mm. Psdpfxjzn E Rhj Aphjra Teleskopsko podaljšanje za 2.900 mm, višina konstrukcije 300 mm. Višina nakladanja, obremenjeno, približno 400 mm, pri 100 mm talne višine. Štirioosna podvozna konstrukcija zadaj, medosna razdalja 1360 + 1400 mm, enojna pnevmatika 285/70 R 19,5, z BPW vrtljivimi osmi 12-14 t, obremenitev osi. Krmiljenje: prisilno krmiljenje. Dolžina 5360 mm. Bagerjev žleb v podvozju. Daljinsko upravljanje z radijskim upravljalnikom. Centralni sistem za mazanje.

Stanje: rabljeno, lastna masa: 12.360 kg, največja dovoljena obremenitev: 32.640 kg, prva registracija: 11/2010, naslednji pregled (TÜV): 09/2024, skupna dolžina: 20.000 mm, skupna širina: 25.500 mm, skupna višina: 7.000 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5 /10mm, medosna razdalja: 1.035 mm, velikost sprednje pnevmatike: 245/70 R 17.5 /10mm, obratovalna teža: 45.000 kg,

Stanje: rabljeno, lastna masa: 7.020 kg, največja dovoljena obremenitev: 35.980 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2023, dolžina tovornega prostora: 13.510 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45 R19,5, velikost zadnje pnevmatike: 445/45 R19,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Zapiralne priklopi za kontejnerje, raztegljivi, za 2 x 20-čevne kontejnerje ali 1 x 40-čevni kontejner, 4 x opozorilne table z osvetlitvijo, dno Omega s trdo leseno ploščo, platišča iz aluminija Alcoa, izvedba Dura-Bright, sprednja stena, približno 1.800 mm, zaboj za palete za 24 evropskih palet, nosilec za pritrdilne letve, 16 x žepev za pritrdilne letve, 12 x pritrdilne letve, dolžina približno 2 m, nova cena je bila 49.000 €, – tiskarske napake, pomembne spremembe in morebitne napake pridržane, ilustrativne slike –, več podatkov je na voljo na: !, Več podrobnosti: ! Prsdpfx Aezvyhqophoa

Stanje: rabljeno, lastna masa: 9.000 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 34.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/1977, dolžina tovornega prostora: 8.250 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.500 mm, skupna širina: 2.500 mm, skupna višina: 1.750 mm, vzmetenje: jeklo, velikost pnevmatike: 8.25 R 15/18 PR, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden, 2 axles, BPW axles, leaf suspension, forced steering, attachable loading ramps Prodpfx Apsi Rqwfohja Superstructure: Saddle height approx. 1,250 mm, both axles with forced steering; gooseneck 4,100 mm; rotation clearance from corner/bevel to kingpin center 1,800 mm; drum brakes ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, največja dovoljena obremenitev: 24.700 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 09/2011, Leto izdelave: 2011, Oprema: ABS, * FLIGEL SDS 410 T * Dvižno ležišče * Krmilna os * Dvižna os * Vitel * Leto izdelave 2011 Podjzmk Ddepfx Aphera * Dobro stanje * Delovni čas od ponedeljka do petka 07:30-12:00, 13:00-18:00, sobota 07:30-17:00. * E-pošta: * Tel/ Whatsapp/ Viber: Alexandar Ilic * Tel/ Whatsapp/ Viber angleško: Mladen Ilic

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 850 mm, Leto izdelave: 2019, Oprema: ABS, AMC PRIKLOPNIK ZA TRANSPORT VOZIL / Z NIZKO OSJO / 13,1 M / HIDRAVLIČNE RAMPE / Z ZAVOJNIM MEHANIZMOM / VINČ - LETNIK: 2019 DATUM PRVE REGISTRACIJE: 28.02.2019 Številka VIN: VGV3SD38S4E2S0085 - DOVOLJENA MASA: 45.000 KG LASTNA MASA: 11.200 KG 3 OSJA ZAVOJNA OŠ HIDRAVLIČNE RAMPE VINČ - VIŠINA OD TAL: 0,8 M SKUPNA DOLŽINA: 13,1 M ŠIRINA TOVORNEGA PROSTORA: 2,50 M DOLŽINA RAMPE: 2,3 + 1,5 M PNEVMATIKE: 255/60 R19.5 - UVOŽENO V KRAJ NI BIL UPORABLJEN 100% BREZ TRKOV - CENA NETO: 33.000 EUR - LAHKO DOSTAVIMO VOZILA V VSAKO PRISTANIŠČE IN MESTO V EVROPI !!! - POLNA PONUDBA NAŠEGA PODJETJA NA SPLETNI STRANI: MOŽNOST POSLATI PODROBNE FOTOGRAFIJE IN VIDEO NA WHATSAPP, VIBER ALI E-POŠTNI NASLOV ZA VEČ INFORMACIJ, NAS PROSIMO POKLIČITE. GOVORIMO NASLEDUJETOJEZIKE: Jakub: Jezik: Poljski Številka telefona: - Sławek: Jezik: Nemški Številka telefona: 003 - Kuba: Jezik: Angleščina, Španščina, Slovenščina, Češčina, Slovaščina, Slovenščina, Francoščina, Danskečina Številka telefona: - Pjdpfx Apeznzb Ajhsra Mariusz: Jezik: Kazahstan, Turkmenistan, Uzbekistan, Srbščina, Litvanščina, Azerbajdžanščina, Gruzijščina, Estonščina, Bolgarščina, Latvija, Kazahščina Številka telefona: - Alex: Jezik: Romunščina, Moldavščina Številka telefona: - Tatiana: Jezik: Italijanščina, Ukrajinščina Številka telefona:

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2007, Oprema: ABS, Vehicle ID No.: WG0STZV3570028656 First registration: 05.04.2007 German MOT (HU) due Unladen weight: 14,950 - 18,600 kg Detachable gooseneck King pin: 3.5" --- Lowbed length: 8,000 mm - Loading height: approx. 250 - 350 mm Extendable by 5,600 mm Width extendable Wheel recesses Chassis wheelbase: 4,100 mm Total length: 16,400 mm Excavator trough - Dipper stick recess Central lubrication system BPW Eco axles with drum brakes With radio remote control 3 hydraulically forced-steered axles Axle loads: 3 x 10,000 kg Detachable gooseneck - Fifth wheel load: 18,000 kg Tyres: 235/75 R 17.5 Predpfx Ajt Eya Ejphsa Modifications, prior sale, and errors excepted. This description serves for general vehicle identification only and does not constitute a guarantee in the sense of commercial law. The contractual description in the purchase agreement is binding. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be pleased to provide an offer from our partner workshops! Vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: novo, največja dovoljena obremenitev: 31.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2026, Oprema: ABS, DOLL NEXT DOLL Tiefbett tera T2P-S3FS21 – 2-achsiger Tieflader aus der kurzfristig verfügbaren rapid-Serie der DOLL Fahrzeugbau GmbH aus Oppenau – aus dem Herzen des Schwarzwaldes. Ideal für den anspruchsvollen Einsatz im harten Off-Road-Bereich, schwierigem Gelände sowie im täglichen Baustellenbetrieb. Je nach Verfügbarkeit sehr schnelle Lieferung und sofort einsatzbereit dank der DOLL-rapid-Serienfertigung. Individuell konfigurierbar nach Ihren Wünschen und Anforderungen. Technische Daten * Zulässiges Gesamtgewicht: 45.000 kg * Eigengewicht: ca. 13.600 kg – Nutzlast: ca. 31.400 kg * Fahrwerk: 2x 12-t-Pendelachsen * Tiefbett teleskopierbar * Fahrzeugbreite: 2.550 mm * Ladehöhe (beladen): 300 mm * Radstand: 1.360 mm Ausstattungsmerkmale * Abfahrbarer Schwanenhals für deutlich erleichtertes und schnelleres Be- sowie Entladen Prodjyytm Rspfx Aphsa * Leichtgängige Teleskopierung für effizientes Handling * Hochwertige Spritzverzinkung – optimaler Korrosionsschutz und reduzierte Standzeiten * Pulverbeschichtete und feuerverzinkte Anbauteile – robust, langlebig und rostfrei Ihre Vorteile auf einen Blick * Schnelle Verfügbarkeit * Robust & zuverlässig – bewährte Technik, auch unter schwierigen Bedingungen ideal * Made in Germany – gefertigt bei DOLL Fahrzeugbau, Oppenau – über 145 Jahre Erfahrung im hochwertigen Fahrzeugbau Smarte Technologien Unser innovativer Ansatz vereint höchste Qualität, Leistung und Wirtschaftlichkeit. Die stetig steigende Nachfrage nach unseren Tiefbett-Sattelaufliegern treibt die konsequente Weiterentwicklung modernster Technologien in der Serienfertigung voran. Kontakt & Standort Hergestellt von DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (Hauptsitz und Produktionsstandort) * Die Fahrzeuge können je nach Kundenstandort direkt im Werk oder bei ausgewählten Referenzkunden deutschlandweit zusammen mit einem Außendienstmitarbeiter präsentiert werden.

Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame for tensioning straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, checker plate over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Brake system: - WABCO brake system according to EU regulations with EBS-E (4S3M) Steel construction: - High-strength fine-grained steel chassis Pjdpfx Apeykpbkshera Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle tool kit - TPMS tire pressure monitoring system to ECE R 141 - Tires: 245/70 R 17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles - European reflective panels (red-yellow) on trailer rear - White reflective tape in accordance with EU regulations on sides and on extension, rear red - Mountings on gooseneck and rear left/right for warning signs, incl. socket - Galvanized extensions, pull-out approx. 230 mm per side - Mount for rotating beacon at rear of trailer - Galvanized folding supports under the rear slope of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard - Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm - Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mm on gooseneck - Note: toolbox covers oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame - Sliding mounting bar for ALU loading ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section - Lift axle on front axle with control via TEBS-E depending on current axle load and load condition - Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light - Mounting for rotating beacon on the warning boards - Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring - Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance - 80 km/h speed stickers on rear and both sides - Load gauge for axle load measurement, incl. load diagram

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko Prodpfxjx I Uyho Aphsa

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm Prsdpfx Asya E A Njphoa

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, konfiguracija osi: 3 osi, prva registracija: 10/2015, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2015, Dvojne rampe / Avtosmerni os / Pnevmatski razširitelj, prirejen labodji vrat Prsdpfx Apey Uh Nvohea

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 Pedpfxjy Auh Ij Aphora * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) Prsdpoyhkqzjfx Aphoa * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 20.000 kg, največja dovoljena obremenitev: 120.000 kg, konfiguracija osi: 3 osi, stanje pnevmatik: 70 odstotek, barva: rdeča, Leto izdelave: 2006, 3 dvižne in krmilne osi. Prodpfxoyaaz Hj Aphea Hidravlično vzmetenje. Višinsko nastavljiv vrat. Pomožni bencinski motor Hartz. Neodvisno brezžično krmiljenje. Hidravlične zadnje rampe za strojno obremenitev do 70 ton.

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) Podpfx Apoywv Ixjhsra -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tires: -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings Pedpevy Edcefx Aphera - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm Prodpfx Apeunrapehoa - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: Predpfxjt Ag Uws Aphea - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high Predpfxsxarmae Aphsa * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps Pedpfxeuqlmno Aphera - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)