Egholm 2100 Traktor Mit 3-Besen Kehrmaschine nakup rabljenega (40.811)

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: Bsdpfxsq Euako Ah Aslh * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) Bsdpfjtpta Dsx Ah Aolh * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: novo, največja dovoljena obremenitev: 850 kg, skupna masa: 1.200 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 1.530 mm, direkt online kaufen auf trailershop Bei ANHÄNGERWIRTZ viele Modelle online verfügbar Bequem und rund um die Uhr Online 24/7 kaufen Selbst abholen oder liefern lassen 😊 Der online Abholmarkt für Ihren neuen Anhänger bietet starke Markenfabrikate! über 850 Neuanhänger auf Lager über 130 gebrauchte Anhänger ständig im Angebot. unverbindliches Beispiel: verschiedene Versionen verfügbar Deckelanhänger GTB 1200 VT3 251x126x153 cm 1200kg gebremst Tieflader Einachs V Fahrgestell, Aufbau erhöhte Alubordwände inkl. Zurrsystem mit Ringösen, Deckel abschließbar mit Reling und Hebehilfe, Heckrampe abschließbar abnehmbar, Stützrad, Heckstützen..... Bedpfjy E E R Eex Ah Aelh Rechnung ausgewiesene MwSt Garantie - Anhänger Händler seit über 35 Jahren Verkauf telefonische Bestellannahme zu unseren Öffnungszeiten Montags-Freitags oder rund um die Uhr über unseren trailershop Urheberrecht - Markenschutz GTB1200VT3 04/26

Stanje: novo, lastna masa: 300 kg, skupna masa: 750 kg, Za kupovinu ove prikolice za transport pasa, molimo Vas da pripremite broj oglasa i zakažete termin putem telefona 02131 595 4218! Termini za kupovinu / preuzimanje dostupni su po telefonskom dogovoru ili tokom rasprodaje iz magacina. Jednostavna i pouzdana realizacija zagarantovana! Primer bez obaveze: 3 boksa i prostor za odlaganje Unutrašnje dimenzije: 2x1x1 cm, Šasija 750 kg V, gumeno vešanje, bez kočnica, pogodno za brzinu do 100 km/h, 30 mm izolacioni zidovi od sendvič panela, glatki beli, zadnja vrata sa bravom, Bočni ventilatori, aerodinamični prednji i krovni deo od poliestera, beli krov sa električnim krovnim ventilatorom od 12 V preko DP, Plywood pod 15 mm, podupirači, oslonac za prikolicu, ukrasni poklopci točkova... Cena po lageru u Neussu, sve uključeno: Blodpfsy Rrlasx Ah Ajh Nadogradnja otporna na prskanje vode. COC dokumentacija, TÜV Rheinland ili partnerski izveštaj, sve uključeno. lager 20-26 la5

Stanje: kot nova (razstavni stroj), številka stroja/vozila: lagermaxi3greydoor, skupna masa: 3.500 kg, Would you like to purchase this Cheval Liberté Maxi 3 with rear doors? To proceed, please have the Scout listing number ready and schedule a phone appointment! Simple and reliable transaction guaranteed! Showroom trailer without initial registration, available while stocks last! Cheval Liberté price ex stock all inclusive, non-binding offer: Maxi3 3500 front exit, tack room Color: dark grey Anodized aluminum floor and side panels Blsdpey Rrcxsfx Ah Ajh Polyester roof and front, dark grey Walk-in front tack room including saddle racks and bridle holders Front exit with wide ramp and upward-opening flap Sturdy hot-dip galvanized steel frame Rubber matting on floor and rear ramp, glued and sealed Internal wheel arches with anti-slip protection Lockable rear doors for direct horse entry or loading with a forklift 3 large and 2 small tinted sliding windows, side ventilation flap on the right with assisted lift for fresh air Adjustable-depth partitions for angled positioning, made from aluminum with painted steel frame and transparent lower splash guard LED interior light 3rd brake light Spare wheel with holder in the tack room Anti-slip protection on the sides and superstructure Superstructure splash-proof PULLMAN 2 chassis with independent wheel suspension, coil springs and shock absorbers, suitable for up to 100 km/h Lowered for very low center of gravity, galvanized High-quality Knott-brand brakes High-quality Knott-brand overrun brake system with parking brake Reinforced V-shaped drawbar, highly stable External tie bar Internal tie-down points Large-format safety lighting Integrated rear fog light Fenders in polyester color Jockey wheel protected between drawbar Hay net hooks 13-pin plug with reversing light Vehicle documents: COC papers for green or black registration Pictures and specifications may vary! Stock new 20-26 18590

Stanje: rabljeno, največja dovoljena obremenitev: 29.700 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 21 m³, skupna širina: 2.550 mm, skupna višina: 3.165 mm, Oprema: ABS, Schmitz Cargobull Gotha jekleni kiper s 3 osmi Tip: SGF / S3 Os: Cargobull Barva: srebrno-modra Zavora: kolutna Nosilnost: 29.700 kg Bljdpfxsy Rvurj Ah Ajh Pribl. 21 m³ 2x dvižna os 1x električna ponjava Dolžina: 7,50 m Širina: 2,33 m Višina: 1,20 m Z veseljem vam pomagamo tudi pri financiranju/leasingu s pomočjo naših partnerjev. Vse informacije brez garancije. Pridržujemo si pravico do sprememb in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 23.340 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2002, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.520 mm, skupna širina: 2.540 mm, skupna višina: 2.300 mm, Oprema: ABS, Nooteboom nizkoposteljna prikolica + labodji vrat in 3 krmiljene osi Tip: EURO5403 Nosilnost: 23.340 kg Zavore: bobnaste + z odstranljivim labodjim vratom + vse osi krmiljene z daljinskim upravljanjem + priložen daljinski upravljalnik Rade volje vam pomagamo tudi na področju financiranja/leasinga v sodelovanju z našimi partnerji. Blodpfx Aey Rvuxsh Ash Vse navedbe brez garancije. Napake in vmesna prodaja pridržane.

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear Bljdpel Th Htjfx Ah Ash * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking locations and 2 on the front wall ----Chassis: * High-tensile steel chassis ----Tipping Platform: * Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance * Bolt-on rear stanchions * Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open * 4 mm fine-grained steel floor plate * Rear mounting rails for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 ----Painting: * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air tanks and support winch painted black * Drop sides painted RAL 9010 pure white * Other RAL-coloured side wall painting available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (not previously in use) * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer set ----Drawbar / Flange eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * Jost mechanical landing gear in front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at the central locking mounting points as well as 2 hooks on the front wall ----Chassis: * Chassis fabricated from fine-grain steel ----Tipper body: * Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters * Rear stanchions bolted * Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors * 4 mm fine-grain steel floor plate * Rear mounting rails for loading ramps ----Load securing: * Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame ----Ramps: * One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment for ramps integrated underneath the load area in the chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Side wall paintwork in RAL 9010 pure white * Other RAL color tones for side walls available at extra cost ----Additional Information: * Reinforced body with load securing certificate * Vehicle comes with one-day registration (never used) * Subject to errors and prior sale ----Delivery time: Blsdpfxsl Th Dus Ah Aeh Immediately available ex Egestorf

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-way Tipper HTK Alu 3000.31 Permissible Total Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With sheet metal extension, 600 mm high, 4-way hinged Including flat tarpaulin - V-drawbar, hot-dip galvanized by immersion - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with electric pump and hand pump - 13-pin connector and reversing lights - Side panels made of aluminum, 350 mm high, completely removable - Rear flap pendulum mounted - 6 lashing rings mounted on the platform floor, lashing force 800 kg each, Dekra certified - Support wheel - Railing trough pre-equipped for quick retrofitting of aluminium ramps Price includes vehicle registration document (Part II registration certificate and COC papers). We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Technical specifications, prices, and information subject to change and errors excepted. No liability for errors or misprints. Bodpeyw Ez Usfx Ah Aelh Features: Automatic reversing, rubber torsion axle, independent suspension, tiltable bed, support wheel, marker lights, chassis and tipping body hot-dip galvanized by immersion, braked, includes warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side panels, completely removable, pendulum-mounted rear hatch, 6 lashing rings with 800 kg tensile force each, Dekra certified, ramp channel pre-equipped for easy retrofitting of aluminum ramps.

Stanje: rabljeno, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2023, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Oprema: garancija za rabljena vozila, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Box dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 750 mm Load area hydraulically tiltable via hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf grate extension/steel mesh side panels, 600 mm high, pendulum-type on all four sides Incl. aluminium loading ramps and 2 x support legs Due to business closure the trailer was repurchased. It is in as-new condition and has only been used approx. 3 times. - V-drawbar, hot-dip galvanised - Chassis and tipping frame, hot-dip galvanised by immersion - Tipping body made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg permissible total weight, electric pump with hand pump - 13-pin plug and reversing light - Aluminium side walls, 350 mm high, fully removable - Rear tailgate can be swung - 6 lashing rings fitted to the bridge floor, lashing capacity 800 kg per ring, Dekra certified - Jockey wheel - Plank compartment pre-installed for easy retrofitting of aluminium planks Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Bodpfxoxyulfj Ah Aslh Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a free temporary registration number plate. We repair trailers of all brands. Further accessories available on request. Technical modifications, price changes and errors excepted. We accept no liability for mistakes or typographical errors. Reversing automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, chassis and tipping frame hot-dip galvanised by immersion, braked, V-drawbar hot-dip galvanised by immersion, tipping body made from one-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight electric pump with hand pump, 13-pin connector and reversing light, aluminium side walls 350 mm high, fully removable, rear flap can be swung, 6 lashing rings fitted to the bridge floor (lashing capacity 800 kg per ring, Dekra certified), plank compartment pre-installed for easy retrofitting of aluminium planks.

Stanje: novo, lastna masa: 1.000 kg, največja dovoljena obremenitev: 2.400 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.380 mm, barva: drugo, gradbena višina: 720 mm, delovna širina: 2.480 mm, Manufacturer: Brian James Trailers Type: Car Transport Trailer T Transporter 231-6023-35-3-12 Permissible total weight: 3,500 kg, triple axle Payload: 2,400 kg Unladen weight: 1,100 kg Bed dimensions: 6,000 x 2,380 mm Tyres: 195/60 R12C Loading height: 650 mm Hydraulically tiltable rear with continuous aluminium ramp Ramp is adjustable in several positions Includes spare wheel Includes Grip Deck Includes LED lighting Includes heavy-duty retractable jockey wheel Includes coupling head with integrated lock Includes perforated anti-slip steel platform Includes wooden floor in centre Includes tool box with aluminium lid As a Brian James PREMIUM PARTNER, we have many models in stock. 5-year chassis warranty. Price includes vehicle registration document (Registration Certificate Part II and COC papers). We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary licence plate for transportation. Blodetmfc Ejpfx Ah Ash We service and repair trailers of all makes. Additional accessories available on request. Technical specifications, price changes, and errors excepted. No liability for errors or misprints. Features: auto-reverse braking, rubber suspension axle, drive-on ramp, tilting bed, jockey wheel, marker lights, hot-dip galvanising, braked, warranty included, customisable equipment, modifications as required, many tie-down options, mesh hooks underneath, V-drawbar hot-dip galvanised, 13-pin plug and reversing lights, durable non-slip surface, 5-year chassis warranty.

Stanje: rabljeno, obratovalne ure: 1.216 h, prevoženi kilometri: 8.947 km, moč: 75 kW (101,97 KM), prva registracija: 07/2020, skupna masa: 5.350 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 4x4, največja dovoljena obremenitev: 1.150 kg, lastna masa: 4.200 kg, medosna razdalja: 1.900 mm, zavore: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 2, največja hitrost: 50 km/h, Oprema: ABS, filter saj, kabina, klimatska naprava, parkirni senzorji, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, sistem za imobilizacijo, zapora diferenciala, * German vehicle * Documentation and inspection books available * Only 8,947 km original mileage * ONLY 1,216 total operating hours * Condition: see photos * DULEVO 2000 * 4 x 4 all-wheel drive * Selectable all-wheel steering * 3-disc brush system at the front, 800 mm wide * Sweeping width: 1,800 mm to 3,000 mm, and up to 3,400 mm with third brush * High-pressure cleaner with hose and spray lance at the rear * Pre-spray system * Spray width: 1,120 mm * Debris container: 2.38 m³ * Fresh water tank: 463 liters * Hydraulic high tipping, tiltable up to 45° * Ideal for sidewalks, pedestrian and cycle paths, narrow streets, etc. * Full comfort cabin for 2 operators * Air conditioning * EasyDrive (hydrostatic drive) (SN) * VM 4-cylinder diesel engine * Power: 75 kW / 102 HP Blsdpfx Ahsw Emh So Aeh * 40 km/h road approval * Heated, tinted panoramic windscreen * Comfort suspension seats * Reversing camera * Ergonomic layout of all controls * Central lubrication system * Rotating warning beacons * Wheelbase: 1,900 mm * GVW: 5,350 kg * Unladen weight: 4,200 kg * Self-propelled road sweeper Should you require a new TÜV inspection, we would be pleased to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV certificates. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend inspection and testing of the goods, to prevent any misconceptions regarding condition or suitability on the buyer’s part. Viewings and tests are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to change, prior sale, and errors. - .

Stanje: rabljeno, prevoženi kilometri: 111 km, moč: 110 kW (149,56 KM), prva registracija: 05/2026, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: siv, vrsta prenosa: mehanski, število sedežev: 3, dolžina tovornega prostora: 2.950 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, centralno zaklepanje, filter saj, klimatska naprava, * Na voljo barvi sta antracitna in smaragdno zelena * SCATTOLINI elektrohidravlični zadnji prekucnik * Dimenzije 2950 x 2100 x 400 mm * Omara za orodje nameščena za voznikom * Samodejna klimatska naprava * Diferencialna zapora na zadnji osi * Dvojni DIN radio s prostoročno funkcijo * Vlečna kljuka kuglaste oblike * Največja dovoljena priklopna masa 3500 kg Bodjyvdu Ajpfx Ah Ajlh * Medosna razdalja 2800 mm * Možna dostava po Nemčiji * Po dogovoru vam pripravimo tudi ponudbo financiranja, tudi z daljšo dobo odplačevanja! * Vaša neposredna kontaktna oseba je gospod Willi Schmidt

Stanje: rabljeno, prevoženi kilometri: 111 km, moč: 110 kW (149,56 KM), prva registracija: 05/2026, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: siv, vrsta prenosa: mehanski, število sedežev: 3, dolžina tovornega prostora: 2.950 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, centralno zaklepanje, filter saj, klimatska naprava, * Razpoložljive barve: antracit in smaragdno zelena * SCATTOLINI elektrohidravlični zadnji prekucnik * Dimenzije 2950 x 2100 x 400 mm * Orodjarna nameščena za voznikom * Avtomatska klimatska naprava * Zapora diferenciala na zadnji osi * Dvojni DIN radio s prostoročno napravo * Kroglična vlečna kljuka * Največja dovoljena masa prikolice 3500 kg * Medosna razdalja 2800 mm * Dostava možna po vsej Nemčiji * Z veseljem vam po dogovoru pripravimo tudi ponudbo financiranja, tudi z daljšo dobo odplačevanja! Bsdpfx Aoyvdu Noh Ajlh * Vaš neposredni kontakt je gospod Willi Schmidt, mobilni telefon

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: Bedpfox Nli Nex Ah Aelh * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards Bledpfjx Nlkgex Ah Aeh * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope Bodpoy Ngzyjfx Ah Ajlh * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Bodpfx Aoy Ngz Hoh Ajlh * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 13.410 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation Bjdpexl Nkgsfx Ah Aslh * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gears at the front * Folding galvanized steel underrun protection for paver loading * Closed plastic single mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grained steel * Steel three-way tipper body (side walls with MM profile - continuous without side posts - swinging with manual central locking and drop-down left side wall with board spring lifter) * Tarpaulin similar to RAL 7038 agate grey with side tension by ratchet straps and elastic cords at the front and rear * Front wall platform made of grating with step at drawbar and hand grip on the front wall * Rear wall – made of HBW 400 steel – swinging with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 x 3 t recessed and foldable lashing rings per side – integrated into steel floor * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * Side wall paintwork in your desired RAL color (no special or metallic paintwork) – changeable up to approx. 6 weeks before completion * Axles, air tanks, landing gears, flange towing eye painted in black tone * Chassis, underrun guard and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale reserved * Available from approx. week 44 / 2026

Stanje: rabljeno, prevoženi kilometri: 300.413 km, moč: 220 kW (299,12 KM), prva registracija: 03/2004, skupna masa: 18.000 kg, vrsta goriva: dizel, barva: siv, konfiguracija osi: 2 osi, vrsta prenosa: samodejen, emisijski razred: Euro 3, Oprema: klimatska naprava, * Volvo FM9 4x2 R 4x2 * Pometalni stroj * Motor pometalnega stroja znamke Mercedes * Nadgradnja Johnston * Serijska št.: 04.01.001 * Številka modela: S.7000 * Letnik: 2006 * Visokotlačni čistilec * 4 valji * VIN: YV2J4CNA14B366996 * Tip motorja: D9A * KW: 220 * Delovna prostornina: 9364 ccm * Lastna teža: 13.280 kg Bodpoqu Iqdsfx Ah Aolh * Skupna teža: 18.000 kg * Nosilnost: 4.645 kg * Medosna razdalja: 3.700 mm * Dolžina vozila: 6.810 mm * Širina vozila: 2.550 mm * Višina vozila: 3.350 mm * Pnevmatske gume: 315 / 80 R 22,5 * Neto cena * Vse informacije brez garancije Tel./WhatsApp:

Stanje: rabljeno, največja dovoljena obremenitev: 36.250 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2015, dolžina tovornega prostora: 12.350 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, skupna višina: 3.030 mm, Oprema: ABS, Meusburger kesonska polprikolica s 3 osmi Tip: MPS-3 Zavorni sistem: kolutne zavore Nosilnost: 36.250 kg Os: BPW 1x dvižna os 2x podporni točki Keson: Dolžina: 12,35 m Širina: 2,49 m Višina: 0,80 m Z veseljem vam pomagamo tudi pri financiranju/leasingu skupaj z našimi partnerji. Bledsy Iibtepfx Ah Ash Vse informacije so brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2019, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.320 mm, višina nakladalnega prostora: 1.400 mm, prostornina tovornega prostora: 24 m³, Schmitz Cargobull Gotha prekucnik s 3 osmi Bledpfxjy Hyqce Ah Ajh Tip: SKI 24 SL 7.2 Os: SAF Zavor: bobenski cca 24 m³ Dolžina: 7,20 m Širina: 2,32 m Višina: 1,40 m Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: pripravljen za uporabo (rabljen), obratovalne ure: 6.512 h, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 44.264 km, moč: 55 kW (74,78 KM), prva registracija: 04/2016, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: prometno oranžna, konfiguracija osi: 4x4, največja dovoljena obremenitev: 1.500 kg, lastna masa: 2.000 kg, naslednji pregled (TÜV): 05/2026, gorivo: dizel, medosna razdalja: 1.600 mm, voznikova kabina: drugo, vrsta prenosa: hidrostat, emisijski razred: Euro 5, Oprema: dodatne luči, filter saj, hidravlika, klimatska naprava, pogon na vsa štiri kolesa, Hako Sweeper Citymaster 1600, direct from first owner Former municipal / authority vehicle 3-brush sweeping system Side arm with weed control function Registered as self-propelled working machine (40 km/h) Major engine service with timing belt, water pump, oil, and filters will be performed before sale 6,512 total operating hours 3,767 sweeping hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Stainless steel debris container Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Gross vehicle weight: 3,500 kg Dimensions (L x W x H): 4,510 mm x 1,210 mm x 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: water-cooled, 4-cylinder VW industrial diesel engine Fuel tank: approx. 60 liters Hydrostatic all-wheel drive system Dual-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min – 225 bar; Circuit 2 (rear) 0–20/25/30 l/min – 195 bar Hydraulic service brake operated via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross vehicle weight: 3,500 kg Unladen weight: 1,950 kg Additional HAKO attachments available for various applications, such as sweeping brooms, snow ploughs, and lawn mowers (not included in the offer) Subject to errors, alterations, and prior sale. Sales strictly according to our terms and conditions and excluding any warranty. Subject to error, changes, and prior sale. We are available Monday to Friday, 9:00 am – 5:00 pm, continuously. Saturday by appointment – outside these hours, appointments by telephone arrangement are possible. We are happy to accept your used machine/vehicle as trade-in. Blodpfx Ahoyf Hihe Aoh Sales to commercial customers and exporters are preferred – this applies to our entire vehicle inventory. The information above is non-binding. Subject to error, change, and prior sale!

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions Bljdpfx Asvin T Soh Ash * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026