Berger Verbreiterbar Auf 3.2M Erste Letzte Achs Hebeax nakup rabljenega (6.923)

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) Bjdpfx Ajpk D I Asi Aelh * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: rabljeno, največja dovoljena obremenitev: 26.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1994, dolžina tovornega prostora: 13.030 mm, širina tovornega prostora: 2.600 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, Ladebett: 8620 mm, Schräge hinten: 450 mm, Breite: 2600 mm, Breite: 3111 mm mit Verbreiterung, ausziehbare und/oder klappbare Verbreiterungen, Schwanenhals: 3960 mm, Ladehöhe Bett: ca. 880 mm, hydraulisch seitlich verschiebbare Auffahrrampen (LxB) 2900 x 830 mm, elektrische Hydraulikpumpe, Kabelfernbedienung, 2 x Schwerlast-Zurringe je Seite, 5 x Rungenstecktaschen je Seite, ausziehbare Warntafeln, Zentralschmieranlage, Stützwinden, drei Achsen hydraulisch zwangsgelenkt, Trommelbremsanlage, Luftfederung, Rundumkennleuchte, Rückfahrscheinwerfer, Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. SI85616 Bjdpfx Ajw Sb Sqsi Aslh Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen. Gerne erstellen wir Ihnen für dieses Objekt ein Finanzierungs- oder Leasingangebot. Bitte sprechen Sie uns an!

Stanje: novo, največja dovoljena obremenitev: 32.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 2.450 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, PAVIC OptiPa PRSH 27 flatbed semi-trailer for transporting timber and long materials. * Chassis length approx. 13,510 mm (frame head to frame head) * Chassis width approx. 2,540 mm (outer frame to outer frame) * Unladen ride height approx. 1,400 mm with fifth-wheel height at 1,200 mm * Fifth-wheel load max. approx. 16,000 kg * Front overhang (kingpin to front edge of frame head) 1,550 mm * 2" kingpin, SAE standard, interchangeable from below * Spare wheel holder for 1 spare wheel * 16 stanchion pockets recessed in the outer frame * 8 pockets as storage for plug-in stanchions, distributed centrally along the entire length * Front bulkhead approx. 2,500 mm high, corners chamfered with sheet metal cladding * Steel floor, 4/6 mm checker plate covering * Outer frame with rounded edges and lashing points approx. every 500 mm * Axle lift on first axle, automatic function, with start-up assist * Axle spacing approx. 1,310/1,310 mm * Premium tires 385/65 R 22.5 * EBS braking system with Roll Stability Program Blodpfx Aiovw Hnwe Ash * Smartboard/TIM/Infocenter, in addition to the H+S valve * LED lighting system * LED work lights * 2x toolboxes (plastic) For further information, please feel free to contact us.

Stanje: rabljeno, prevoženi kilometri: 322.521 km, moč: 500 kW (679,81 KM), prva registracija: 02/2020, vrsta goriva: dizel, lastna masa: 16.300 kg, največja dovoljena obremenitev: 23.700 kg, velikost pnevmatike: 315/80 R 22.5/11mm, konfiguracija osi: 10x4, medosna razdalja: 4.200 mm, naslednji pregled (TÜV): 02/2020, voznikova kabina: spalna kabina, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 9.400 mm, skupna širina: 25.500 mm, skupna višina: 35.000 mm, velikost sprednje pnevmatike: 315/80 R 22.5/11mm, obratovalna teža: 40.000 kg, Oprema: klimatska naprava,

Stanje: rabljeno, največja dovoljena obremenitev: 23.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/2010, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Krone box semi-trailer SZK 18 | Code XL | Excellent condition General: * Permissible total weight: 30,000 kg * Fifth wheel load: 12,000 kg * Axle load: 18,000 kg * Coupling height: approx. 1,100 mm * Body: approx. 13,620 x 2,470 mm Chassis & Technology: * 2 x BPW axles (each 9,000 kg) * Air suspension with lifting and lowering function * Disc brakes + EBS (Wabco, incl. RSS stability program) * 385/65 R22.5 tires + spare wheel Blodpfx Aiey Dl Hqj Ajh * Spring-loaded parking brake Body: * Enclosed box body (sandwich construction, 30 mm) * Internal height: approx. 2,715 mm * Drive-through height: approx. 2,650 mm * Translucent roof (plastic) * Rear portal with container doors + swing bar lock * 2 rows of lashing rails * Floor: 30 mm, suitable for forklift trucks up to 7,000 kg axle load Equipment: * LED lighting * Toolbox * Wheel chocks * Rear sliding step ladder * Load securing lashing system * Code XL certificate Other: * Current roadworthiness certificate (TÜV) * Robust black paint finish (RAL 9005) * Very stable and durable construction If you have any questions, we are happy to assist you at any time.

Stanje: rabljeno, prva registracija: 02/2008, Leto izdelave: 2008, Schmidt Hagen SP/42/E/13,5-21,5 ∗3-osni plato polpriklopnik∗Krmilne osi∗ALCOA∗ !!! zelo dobro stanje !!! ● ABS ● Zračno vzmetenje ● Dvižni/spustni sistem ● Višina tal: 1.420 mm ● Alcoa - Dura Bright platišča ● 3 x Mercedes osi z disk zavorami ● vse 3 osi so vodljive! ● Pneumatike: 385/55 R 22.5 ● Globina profila: 3/2 / 5/4 / 5/6 mm ● Skupna masa: 42.000 kg ● Lastna masa: 10.200 kg ● Nosilnost: 31.800 kg Blodpfxeyutxze Ai Ash - nemški polpriklopnik - Tehnični pregled: na zahtevo in za doplačilo: NOVO! Napake in vmesna prodaja pridržane! = Dodatne informacije = Za več informacij se obrnite na Joannis Arpantzanis ali Kai Bühler.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.000 kg, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 50 m³, vzmetenje: zrak, velikost pnevmatike: Dunlop SP 247 Bereifung 385/65 R 22.5, barva: siv, Leto izdelave: 2025, število osi: 3, Oprema: 4-v-1 lopata, ABS, Reisch Alubox-R – 50 m³ Large Volume Tipping Body – Available Now! 3-Axle Tipping Semi-Trailer with Aluminium Body – New Vehicle – Ready for Immediate Collection! Looking for a high-performance vehicle with a large payload, robust construction and premium features? The Reisch Alubox-R with approx. 50 m³ capacity is the ideal solution for agricultural, construction, or waste management applications. ✅ Your Benefits at a Glance • Stock vehicle – ready for immediate use • Capacity: approx. 50 m³ • Weight: approx. 6,140 kg unladen weight • High-end specification included • New vehicle with extensive accessory package Technical Specifications • Internal body dimensions: approx. 9,200 x 2,200 x 2,500 mm • Volume: approx. 50.0 m³ • Coupling height: approx. 1,150 mm (unladen) • Unladen weight: approx. 6,140 kg Paint & Corrosion Protection • Body: RAL 9006 White Aluminium • Chassis: RAL 9005 Jet Black ⚙️ Chassis & Equipment • SAF INTRADISC CD Ø430 – Disc Brakes • Lifting axle & traction aid on 1st axle • Dunlop SP 247 tyres 385/65 R 22.5 • Steel rims in silver • Wheel nut covers included Chassis Equipment • Frame made of high-strength S700 steel • Foldable underrun guard (aluminium, spring-assisted) • Stainless steel side underrun protection to ECE standards • Tyre pressure monitoring (TPMS), steel air tanks • Full LED lighting (ASPÖCK) • Reversing lights, wheel chocks, mud flaps • Load pressure gauge, water tank • GMP-compliant tool storage: toolboxes left & right • 3 m access ladder, broom & shovel holder incl. accessories Body & Superstructure • Floor: 7 mm aluminium • Sidewalls: 2.1 mm aluminium • Continuously welded profiles • Rear trapezoidal wear plates • Externally mounted tailgate with additional safety lock • 1 grain discharge slide with chute • 4 mechanical hook locks + oscillating bearings • Rear cover on locking shaft Hydraulics & Tarpaulin • HYVA high-pressure front cylinder (250 bar) • HYFIX lower hold-down under body • Pressure connection with Hyva 1" coupling • PVC roll-up tarpaulin (900 g/m²), colour: silver • Longitudinal and transverse tarpaulin bars with tension belts • Central locking system for secure load securing Documentation • Registration documents • Operating manual & service documentation Price & Location • Net: €41,500.00 • Gross: €49,385.00 • Pick-up location: 86462 Langweid (All prices exclude statutory VAT.) Delivery or collection – the choice is yours! Immediately available and ready for collection – or have it conveniently delivered! On request, CargoSell GmbH will arrange reliable transport to your location. Financing & Leasing – tailored to your needs • ✔️ Terms up to 72 months • ✔️ Leasing with or without down payment • ✔️ Purchase or return option • ✔️ Available for start-ups • ✔️ Quick, fair & straightforward Blodpfx Aisyq Hx To Ajh Contact us now – personal & without obligation.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 5.890 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 43 m³, vzmetenje: zrak, velikost pnevmatike: Dunlop SP 247 Bereifung 385/65 R 22.5, medosna razdalja: 1.300 mm, barva: srebrn, Leto izdelave: 2025, Oprema: 4-v-1 lopata, ABS, Reisch Alubox-R – 43 m³ High-Volume Tipper Body – Now Available! 3-Axle Aluminium Tipping Semi-Trailer – New Vehicle – Ready for Immediate Collection! Are you looking for a lightweight vehicle with a spacious loading area, high-end features and intelligent details, available straight away? Then the Reisch Alubox-R with 43 m³ capacity is the perfect solution for construction, waste management, or agricultural logistics. ✅ Your Advantages at a Glance • Stock vehicle – ready for immediate use • Complete aluminium package included • Capacity: 43 m³ • Weight advantage: only 5,860 kg unladen weight • Premium equipment – brand new Technical Data • Internal body dimensions: approx. 8,400 x 1,900 x 2,500 mm • Volume: approx. 43.0 m³ • Saddle height: approx. 1,150 mm (unladen) • Unladen weight: approx. 5,860 kg Paintwork & Corrosion Protection: • Body: RAL 9006 White Aluminium • Chassis: RAL 9005 Jet Black ⚙️ Chassis & Equipment • SAF INTRADISC CD Ø430 – disc brakes • First axle lift & starting aid • Dunlop SP 247 385/65 R 22.5 tyres • Alcoa LVL ONE aluminium rims • Metal wheel nut covers Chassis Features • High-strength steel frame S 700 • Aluminium components: landing legs, air tanks, underrun protection • Lateral underrun protection according to ECE • Pneumatic system: KNORR BREMSE ILVL • TPMS tyre pressure monitoring • Full LED lighting (ASPÖCK ECOLED II) • Reversing & auxiliary lights (2 each) Bledeyq Hvfspfx Ai Aeh • Load gauge, water tank, tool box • Broom & shovel holder incl. accessories • Spare wheel holder & foldable access ladder (3 m) Body & Superstructure • Floor: 7 mm aluminium • Sidewalls: 2.1 mm aluminium • Externally mounted split tailgate • 1 grain chute with bag outlet • Additional tension locks & 4 hook locks • Double oscillating bearing • Work lights inside the body (operable from outside) Hydraulics & Tarpaulin • HYVA front-lifting cylinder (250 bar) • HYFIX stabiliser • PVC roll tarpaulin (900 g/m²), colour: black • Integrated longitudinal tarpaulin tubes + cross bows with tension straps • Side lashing with central locking • Front wall lock & round tube system Documentation • Registration documents • Operator’s and service manual Price & Location • Net: €38,500.00 • Gross: €45,815.00 • Collection: from Langweid 86462 or directly from the Reisch factory, 07368 Remptendorf (All prices plus VAT) Delivery or Collection – You Decide! Available immediately for pick-up – or delivered straight to your location! CargoSell GmbH can arrange reliable transport directly to your business or work site – fast, flexible, dependable. Financing & Leasing – Tailored to Your Needs Whether leasing, hire purchase or flexible financing: We’ll help you find the solution that fits your business! • ✔️ Terms up to 72 months • ✔️ Leasing with or without down payment • ✔️ Purchase option or return • ✔️ Suitable for start-ups • ✔️ Fast processing & fair conditions Request now – non-binding & personal. Contact: Alexander Chetschik – CargoSell GmbH Tel: +49 174 3011927

Stanje: rabljeno, lastna masa: 12.050 kg, največja dovoljena obremenitev: 32.950 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, dolžina tovornega prostora: 14.450 mm, širina tovornega prostora: 2.670 mm, višina nakladalnega prostora: 2.590 mm, skupna dolžina: 2.720 mm, skupna širina: 4.000 mm, skupna višina: 15.500 mm, vzmetenje: zrak, velikost pnevmatike: 425/65R22,5, gradbena višina: 4.000 mm, Oprema: ABS, registracija tovornjaka, Pacton TRD 345 3-axle box trailer | Brakes: disc brakes | Axle type: SAF | Tyres: 425/65R22.5 | Axle 1: Steered, tyre tread left: 7.0 mm, tyre tread right: 15.0 mm | Axle 2: Tyre tread left: 7.0 mm, tyre tread right: 8.0 mm | Axle 3: Steered, tyre tread left: 10.0 mm, tyre tread right: 7.0 mm | Wabco Smartboard | Chassis material: steel | Kingpin size: 2 inch | Central lubrication | ABS, EBS | Subject to errors, input mistakes and prior sale. Blodpfx Ajrv Alzsi Aeh

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm Bsdpfx Aioyz E T Sj Aelh * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: rabljeno, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/1983, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 12.100 mm, širina tovornega prostora: 2.150 mm, skupna širina: 2.150 mm, According to our "General Terms and Conditions", without any warranty or guarantee, we are pleased to offer you the following vehicle today—offer subject to change and prior sale, errors and omissions excepted: Vidal, Herbert 2-Axle Boat Trailer First registration: 01.07.1983 Gross permissible weight: 10,000 kg Unladen weight: 2,000 kg Payload: 8,000 kg Length (extended): 12,100 mm Width: 2,150 mm Loading height: approx. 30 cm Valid roadworthiness certificate (TÜV) until: 04/2026 Bjdoyz Ez Nopfx Ai Aolh German registration documents Gooseneck design Tyres: 8.25R15TR, approx. 70% tread remaining 2 axles Rotating beacon at rear Cross members and stowage wood Extendable light carrier from approx. 10,000 mm to 12,100 mm Suitable for transporting boats up to 40" 4x side protection supports Open floor in centre Removable and illuminated width marker boards at front and rear Good overall condition (without boat) Price: €7,500.00 (net) All information provided without any warranty or guarantee. Our "General and interpreted Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €50,000.00 is the District Court of Ludwigslust; for higher dispute values, the Regional Court of Schwerin. Subject to prior sale, errors and omissions excepted.

Stanje: novo, največja dovoljena obremenitev: 23.810 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.622 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.725 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, Wielton 2-axle box trailer, brand new Type: NF 2 DS Dry Master Superstructure RAL 9010 pure white Code XL certificate Unladen weight: 6,190 kg Fifth wheel height: 1,120 mm New vehicle – immediately available Chassis - Welded construction made of high-quality S700 steel - SAF disc brake axles Ø430 mm - Without axle lift - Air suspension - Underrun protection made of steel - Side impact protection made of aluminum profiles Wheels - Tyres 385/65 R22.5 - Steel rims - Tyre brand: Bridgestone - 2x basket with spare wheel Braking system - Manufacturer: HALDEX - HS valve - Steel air tanks Electrics - Manufacturer: ASPÖCK Bjdpsyy Hf Tefx Ai Aolh - Partial LED tail lights - 2x reversing lights - 3x interior ceiling lights Floor - 30 mm phenolic resin panels - 19 pairs of lashing rings - Steel chequer plate at rear - Suitable for forklift up to 7,500 kg axle load Body - GRP plywood panels - Interior aluminum impact protection approx. 250 mm high - Corner stanchions made of aluminum - Aluminum wing doors - Two rows of load securing rails inside, at heights of 800 mm and 1,600 mm Accessories - 2x PVC toolbox 145 L - ROLL-STOP roller impact buffers - Access ladder at the rear - Aluminum leaning ladder Interim sale and errors regarding this offer are expressly reserved. Only the agreements in the order confirmation or the purchase contract are binding. For precise equipment details and prices, please contact our sales staff. Please get in touch with us.

Stanje: novo, prva registracija: 03/2026, Krone 2-osni zabojni polpriklopnik, 10-t os, z in brez dvižne ploščadi (LBW) Blodpfx Aijyxg Ryj Ajh

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable loading platform: - Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steering - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Axle tool kit - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres: 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip - 2 wheel chocks with holder on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring - European reflective warning plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear Bodpfx Aijyxc Eyj Aelh - Gooseneck and rear left and right brackets for warning signs, including socket - Sliding hook-in bar for ALU loading ramps at the rear of the vehicle - One bracket for a rotating beacon at the rear of the trailer - Galvanized folding supports under the rear bevel of the loading platform - One mudguard at the rear of the trailer - Operating manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover - Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm - The rear galvanized stanchions are removable (body length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - On the warning signs a bracket for a rotating beacon - Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring - On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection - Speed sticker 80 km/h at the rear and on both sides - Axle load gauge for determining axle loads, including load diagram

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform Bledpol Tihujfx Ai Aeh * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: Bodpfxsxptn Dj Ai Ajlh * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: novo, največja dovoljena obremenitev: 34.720 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.195 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, 3-Achs Sattelauflieger LOGO 10X * Stahl-Glattblech-Abdeckung über Königszapfen geschweißt * Stahl-Tränenblech-Abdeckung hinten verschweißt * Elektronische Luftfederung * 3 Einzelachsen, Fabrikat SAF, 9 t mit Scheibenbremsen Bedorymwzjpfx Ai Aelh * 1. Achse liftbar * Handmechanische Abstützung * Schemel: 6x ExTe D10 (Pos. 4 mit Doppeltaschen, Pos. 5 mit flachen Rungentaschen sowie mit Schnellverschluss-Keilsystem) * Rungen: 8x ExTe D7 teleskopierbar + 4x ExTe D10 teleskopierbar * Bereifung: 385/55 R 22,5 auf Stahlfelgen * EBS Bremsanlage * LED Schlußleuchten mit integriertem Dreieckrückstrahler * 4x LED Arbeitsscheinwerfer (1.800 Lumen) * Luftkessel aus Aluminium * 3x Greiferabweiser zwischen den Schemeln * Rahmen + Schemel in RAL 9011 Graphitschwarz * Alle anbauteile nach EG-Vorschrift Abbildungen können vom Original abweichen. Angaben ohne Gewähr. Kontakt: Niclas Lott Tel.:

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.205 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Overall width: 10,402 mm Floor length: 8,585 mm Total width: 2,550 mm Overall height to upper frame: 3,550 – 3,600 mm Overall height to tarp peak: 3,710 – 3,760 mm Track width: 2,040 mm King pin to second axle: 6,120 mm Fifth wheel height: 1,200 mm Axle spacing: 1,310 mm Rear overhang: 1,367 mm Floor height: 1,400 – 1,450 mm Maximum height with the body tipped: 9,720 – 9,770 mm Technical gross weight: 42,000 kg Axle load: 8,000 kg Axle load, technical: 9,000 kg Saddle load: 12,000 kg Saddle load, technical: 15,000 kg Loading volume: 47.6 cbm Unladen weight: 6,233 kg Weight stated with an accuracy of +/-3% Axle spacing: 1,310 mm Distance kingpin to 2nd axle: 6,120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with dropped gooseneck, longitudinal beams with recessed fifth wheel plate area Welded structure, weight-optimized using high-grade S700 steel Side impact protection from aluminum profiles in accordance with ECE 73 2 plastic wheel chocks Axles and suspension 1,200 mm unladen fifth wheel height Rigid axles 3rd lift axle 1st lift axle SAF disc brake axles 3x 9,000 kg 22.5 INTRADISC CD 2-speed landing legs, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pieces Rubber mud flaps with Wielton logo behind third axle 6x steel wheels 22.5–11.75 ET=120 Protective caps for wheel bolts Tyres 6x 385/65/22.5 standard tyres (Bridgestone/Hankook) Other chassis equipment 44 L toolbox (mounted front left on the chassis) 30 L water tank (mounted centre left on the chassis) Mount for dust bag on chassis, 1 pc. Dust bag, 2 pcs. Shovel and broom on chassis above mudguard Extendable rear ladder Internal height: 2,100 mm Double-wing aluminium combination door, aluminium (1/2 ?) vertical with portal crossbeam Side walls, SL internal thickness 2.5 mm, fully welded Bodpfxjp Ncb Ne Ai Aslh Front wall inclined at 20 degrees Pallet-width design 7 mm floor 2 grain chutes 2 tension latches at the bottom Transverse beam spacing under the floor: 360 mm Body damping: Polyblock Other superstructure equipment Tension chain between side walls Control stand on chassis frame, access front left (driver’s side) PVC rolling tarp 680 g/m² with quick release and aluminium winding tube (vertical tail with extension triangle at front and rear, centre tube welded into tarp) Braking system/pneumatics Steel air tanks Spring pressure gauge Automatic lowering when tipping Wabco brake system 2S/2M Chassis paintwork Chassis painted RAL 7021 (black grey) Body paintwork Body painted RAL 7001 (silver grey) Tarp colour RAL 9006 (white aluminium) Hydraulics HYVA hydraulic cylinder, upper eye mount Hydraulic connection kit 1" Electrics Partial LED lighting LED reverse lights 2 pcs. 2x 7-pin + 1x 15-pin with EBS connection, without link cables to tractor unit Lighting partial LED Aspöck-EuroPoint III 2 LED work lights on landing legs Additional systems Tipping angle indicator Control line for lift axle from cab The system is designed for semi-trailers and trailers and monitors the vehicle’s tyre pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors mounted on the rims (monitoring tyre pressure and temperature) and a device connected to the EBS. Reflective warning signs Partial contour marking with Wielton logo Partial side contour marking, white

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.205 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Overall width: 10,402 mm Internal floor length: 8,585 mm External width: 2,550 mm Overall height up to top frame: 3,550 – 3,600 mm Overall height up to top of tarpaulin: 3,710 – 3,760 mm Track width: 2,040 mm Bedpfx Aowz Auysi Aolh King pin to 2nd axle distance: 6,120 mm Fifth wheel height: 1,200 mm Axle spacing: 1,310 mm Rear overhang: 1,367 mm Floor height: 1,400 – 1,450 mm Max height with body fully tipped: 9,720 – 9,770 mm Technical gross vehicle weight: 42,000 kg Axle load: 8,000 kg Technical axle load: 9,000 kg Fifth wheel load: 12,000 kg Technical fifth wheel load: 15,000 kg Load volume: 47.6 cbm Unladen weight: 6,233 kg Weight stated with an accuracy of +/-3% Axle spacing: 1,310 mm Distance king pin to 2nd axle: 6,120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck, longitudinal beams with recessed fifth wheel area Welded, weight-optimized construction made of high-strength S700 steel Side impact protection made from aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension: 1,200 mm fifth wheel height (unladen) Rigid axles 3rd lift axle 1st lift axle SAF disc brake axles 3x 9,000 kg 22.5" INTRADISC CD 2-speed gearbox landing leg, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pcs Rubber mudflaps with Wielton logo behind third axle 6x steel rims 22.5-11.75 ET=120 Nut protection caps Tyres: 6x tyres 385/65/22.5 standard (Bridgestone/Hankook) Other chassis equipment: Toolbox 44 L (mounted front left on chassis) Water container 30 L (mounted centre left on chassis) Dust bag holder on chassis, 1 pc Dust bag, 2 pcs Shovel and broom mounted on the chassis above the mudguard Extendable rear ladder Internal height: 2,100 mm Double-wing aluminium combi door (½ vertically split) with portal beam Side walls, interior thickness 2.5 mm, fully welded Front wall inclined 20 degrees Pallet-width design 7 mm floor 2 grain discharge slides 2 locking clamps underneath Cross member spacing under floor: 360 mm Polymer body dampers Body extras: Tension chain between side walls Operator platform on chassis frame, access front left (driver's side) PVC rolling tarp 680 g/m² with fastener and aluminium winding tube (vertical rear edge with extension triangle front and rear, centre tube welded into tarp) Braking system/pneumatics: Steel air tanks Spring pressure gauge Automatic lowering during tipping Wabco braking system 2S/2M Chassis painting: Chassis painted RAL 7021 (black grey) Body painting: Body painted RAL 7001 (silver grey) Tarpaulin colour RAL 9006 (white aluminium) Hydraulics: HYVA hydraulic cylinder, upper eye mounting Hydraulic connection kit 1" Electrics: Partial LED lighting 2x LED reversing lamps 2x 7-pin, 1x 15-pin with EBS connector (no linking cables to tractor unit) Lighting: partial LED, Aspöck-EUROPOINT III 2 LED work lights at landing legs Additional systems: Tipping angle indicator Control line for lift axle from driver’s cab The system is developed for semi-trailers and trailers and is used to monitor the tyre pressure and tyre temperature of the vehicle. Manufacturer: ABERG Connect. The system comprises TPMS sensors (tyre pressure and temperature) mounted to the wheel rims and a device connected to the EBS. Reflective warning panels Partial contour marking with Wielton logo Partial contour marking side: white Partial contour marking rear: red Wielton warning decals Warranty: The manufacturer grants a 24-month warranty on the vehicle.

Stanje: novo, številka stroja/vozila: 087c7b6bc0c6118a84279fb46, lastna masa: 4.100 kg, Further Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, loading area tapered downward after the rear axle by approx. 8°. Longitudinal beams made from steel sections. Steel frame, hot-dip galvanized, with stainless steel sheet at the bend for cable guidance, flush with the platform floor. Suitable for trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Tow Coupling Tow coupling, ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, including installation and electrics with 7-pin socket. Accessories/Conversions 2 brackets for wheel chocks, folding side underrun protection in aluminum – adopted from the truck! Rear under-run protection in steel, quarter shell fenders with mudflaps – adopted from the truck! Toolbox Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included). 1 holder for 3 fuel canisters. 1 stainless steel toolbox, w=600 / h=400 / d=500 mm, with polished door, lockable, includes control valve and electrohydraulic power unit. Controller box with peripheral door seal and sealing grommets at the rear (splash-proof as technically possible). Electrics Adaptation of existing taillights, 2 additional recessed LED work lights in the bulkhead, switched via parking light with switch outside on front wall, left side. 1 LED work light at the rear, with integrated reversing camera, including color flat screen monitor, monitor with suction cup mount and power supply via 24 Volt, voltage divider 24/12V, 1 x 7-pin 12V socket = plug adapter. Flooring Mega Grip made from serrated galvanized grating, steel floor gratings 50/4 including mesh size 50 mm. Top with anti-slip serrations, laid continuously over main frame platform. Lashing Points 12 pairs of swivel-mounted lashing rings in the outer frame – each 10 tons, first ring at the very front, last at the very rear. 1 lashing ring centrally at the rear for fastening winch cable. 12 lashing rings recessed in the floor, each 5 tons (not in rear bevel). Bulkhead Bulkhead made from sheet steel, height 1,500 mm. Fixed with corner posts at bulkhead height. Each with 2 x 12 hanging brackets for lashing chains mounted left and right on the bulkhead. Winch Bedji Riytspfx Ai Aslh Electric cable winch, 24 Volt, pulling capacity approx. 6,350 kg, mounted centrally at the bulkhead (recessed with loading bridge), operated by radio remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, cable pressure plate, incl. overload protection, winch freewheel clutch, handheld control with approx. 5 m cable, winch acceptance certificate, civil engineer test report, logbook, and operating instructions. Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also for ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic power unit. Approach angle approx. 8° with lowered rear axle. Ramp platform made of galvanized steel grating (as platform floor), with anti-slip serrations. Ramps can be pushed together to approx. 170 mm, ramp extension hydraulically. Ramps preconfigured for use at loading docks with full load capacity. Ramp locking with 2 lashing straps. Ramp tip stepped (nose min. 150 mm) for use at loading docks. Operating instructions included. Ramps lowering valve for ramp lowering. Support Adjustable support legs at rear, foldable and length-adjustable

Stanje: novo, številka stroja/vozila: c78894767223a51dd199030f3, lastna masa: 4.600 kg, Further Information Frame Steel welded construction made from fine-grain steel, hot-dip galvanized, flat platform without raised edges. The loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made from steel profiles, steel frame hot-dip galvanized, with stainless steel plate (NIRO) at the bend to guide the cable, flush with the floor. For trucks with wheelbase: 2nd axle at 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm. Trailer Coupling Ball-type tow hitch D24.8: (height from the ground to the top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrics with 7-pin socket. Accessories/Modifications 2 chock holders, foldable aluminum side underrun protection – taken from the truck! Steel rear underrun protection, quarter-shell mudguards with mud flaps – taken from the truck! Toolbox Plastic toolbox with drawer and shelf, W = 650 / H = 520 / D = 670 mm, lockable with a padlock (lock not included). 1 bracket for 3 jerry cans. 1 stainless steel toolbox, W = 600 / H = 400 / D = 500 mm, with polished door, lockable, includes control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash water protection as far as technically possible). Electrics Adaptation of existing tail lights, 2 additional LED work lights recessed into the front wall, switched via parking lights with switch on the outside front wall left. 1 LED work light at the rear with integrated reversing camera including color flat-screen monitor with suction cup mount and power supply via 24 volts, voltage divider 24/12V, 1 seven-pin 12V socket adapter. Floor Mega Grip made from serrated, galvanized grating, steel gratings 50/4 included, with 50 mm mesh. Top side with anti-slip serration, laid continuously over the entire main platform area. Lashing Rings 12 pairs of lashing rings freely pivotable on the outer frame - each rated to 10 t. 1 at the very front and one at the very rear. 1 lashing ring at the rear center for attaching the winch cable. 12 lashing rings recessed centrally into the floor, each rated to 5 t. (not included in rear slope). Front Wall Front wall made from steel sheet, height 1,500 mm. Fixed with corner posts up to full front wall height. 2 x 12 hanging brackets for lashing chains mounted left and right on the front wall. Winch Electric cable winch, 24 volts, pulling force approx. 6,350 kg, mounted centrally at the front wall (recessed in the loading bridge), operated via remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, with cable pressure plate, including overload protection, cable freewheeling clutch, hand control with approx. 5 m cable, winch acceptance, civil engineer test report, test log, operating instructions. Loading Ramps Bodpok Unitjfx Ai Aolh Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg per pair (also for ramp loading), electrohydraulically tiltable and laterally movable – including electrohydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle. Ramp support surface made from galvanized steel grating (like the loading bridge floor), with anti-slip serration. Ramps can be compacted to approx. 170 mm, hydraulically extendable. Ramp prepared for operation at loading dock with full load capacity. Ramp locking with 2 tension belts. Ramp tip offset (nose min. 150 mm) suitable for placement at loading ramps. Ramp operation labeled. Drop brake valve for l

Stanje: novo, največja dovoljena obremenitev: 30.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 15.215 mm, skupna širina: 2.550 mm, skupna višina: 1.640 mm, Leto izdelave: 2025, Oprema: ABS, 2-axle semi-trailer LOGO 21 * Air suspension * 2 single axles, BPW brand, 12 t with drum brakes * Manual landing gear * 8 x DOLL Mammut bolsters and stakes * Tires 315/80 on steel rims * EBS-E braking system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * BEKA-MAX central lubrication pump * 2x snow chain holders * RAL 9011 graphite black (frame + bolsters), RAL 3002 carmine red (stakes) * Side underrun protection according to ECE R73 * All add-on parts according to EC directive Various additional equipment available. Further information upon request. Images may differ from the original. Specifications subject to change without notice. Bedpfogqc Hfsx Ai Ajlh Contact: Niclas Lott Tel.:

Stanje: novo, največja dovoljena obremenitev: 33.570 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, DOLL 3-Achs Sattelauflieger LOGO 12 * Stirnwand aus Feinkornstahlblech, ausgelegt nach DIN EN 12642 Code L * Verschweißte Stahl-Tränenblech-Abdeckung * 3 Einzelachsen, Fabrikat SAF, 9 t Scheibenbremsen Intradisc CD * 1. Achse als Liftachse Bjdpfsx Egtlex Ai Aslh * Luftfederung mit Heben & Senken über Drehschieberventil * Handmechanische Abstützung * 8 x DOLL Mammut Schemel und Rungen * Bereifung 385/65 R 22.5 auf Stahlfelgen * LED Schlußleuchten mit integriertem Dreieckrückstrahler * 4x LED Arbeitsscheinwerfer (1.800 Lumen) * RAL 9011 Graphitschwarz (Rahmen + Schemel), RAL 3002 Karminrot (Rungen) * COC-Dokument Verschiedene schraubbare Zusatzausstattungen wie z. B. Werkzeugkasten, Zusatzabstützung, Aufstieg sind gegen einen Mehrpreis erhältlich. Weitere Informationen auf Anfrage. Abbildungen können vom Original abweichen. Angaben ohne Gewähr. Kontakt: Niclas Lott Tel.: ENGLISH: DOLL 3-axle semi-trailer LOGO 12 * Front wall constructed from fine-grain steel sheet, designed according to DIN EN 12642 Code L * Welded steel checker plate cover * 3 single axles, SAF brand, 9 t Intradisc CD disc brakes * 1st axle liftable * Air suspension with raise/lower function via rotary lever valve * Manual mechanical landing legs * 8 x DOLL Mammut bunks and stanchions * 385/65 R 22.5 tyres on steel rims * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * RAL 9011 graphite black (chassis + bunks), RAL 3002 carmine red (stanchions) * COC (Certificate of Conformity) document Various bolted optional features such as toolbox, additional supports, and access ladder available at extra cost. Further information on request. Images may differ from actual product. Information subject to change. Contact: Niclas Lott Tel.: FRENCH: Semi-remorque DOLL à 3 essieux LOGO 12 * Paroi avant en tôle d’acier à grains fins, conçue selon la norme DIN EN 12642 Code L * Couvercle de plancher en tôle larmée soudée * 3 essieux simples SAF, freins à disque Intradisc CD 9 t * 1er essieu relevable * Suspension pneumatique à commande montée/descente par vanne rotative * Béquilles mécaniques manuelles * 8 x chevalets et montants DOLL Mammut * Pneus 385/65 R 22,5 sur jantes acier * Feux arrière LED avec réflecteur triangulaire intégré * 4 x projecteurs de travail LED (1 800 lumens) * RAL 9011 noir graphite (châssis + chevalets), RAL 3002 rouge carmin (montants) * Document COC Différents équipements vissés optionnels tels que boîte à outils, supports supplémentaires et échelle disponibles en supplément. Pour plus d’informations, merci de nous contacter. Les visuels peuvent différer du produit réel. Informations sans garantie. Contact : Niclas Lott Tel.: POLISH: Naczepa 3-osiowa DOLL LOGO 12 * Ściana przednia z drobnoziarnistej blachy stalowej, zgodna z DIN EN 12642 Kod L * Spawana stalowa pokrywa z blachy ryflowanej * 3 osie pojedyncze, marka SAF, hamulce tarczowe Intradisc CD 9 t * Pierwsza oś podnoszona * Zawieszenie pneumatyczne z podnoszeniem i opuszczaniem za pomocą zaworu obrotowego * Mechaniczne, ręcznie rozkręcane podpory * 8 x kłonice i słupki DOLL Mammut * Opony 385/65 R 22,5 na stalowych felgach * Tylne światła LED ze zintegrowanymi trójkątnymi odblaskami * 4x lampy robocze LED (1800 lumenów) * Kolor: RAL 9011 grafitowa czerń (rama + kłonice), RAL 3002 karminowa czerwień (słupki) * Dokument COC Różne przykręcane opcje dodatkowe, jak skrzynka narzędziowa, dodatkowe podpory, drabinka, dostępne za dopłatą. Dalsze informacje na zapytanie. Zdj

Stanje: novo, največja dovoljena obremenitev: 35.700 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.735 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, 3-Axle Semi-Trailer LOGO 14X Specially designed for OFF- and ON-ROAD OPERATIONS! * Electronic air suspension * 3 single axles, SAF brand, 9 t capacity with disc brakes * 1st axle liftable, 3rd axle with trailing steering * Remote control for operating chassis lock and brakes * Manual mechanical support legs * Bolster: 8x ExTe D7 (Position 1 with double pockets, Position 2 adjustable with flat stanchion pockets and quick-release wedge system) * Stanchions: 14x ExTe D7 telescopic stanchions, 2x ExTe D10 telescopic stanchions * Tires: 385/65 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangle reflector * 4x LED work lights (1,800 lumens) * Aluminum air reservoir * 1x grapple rope * 1x shunting coupling Bedpfx Aiohnak Ie Aolh * Frame + ExTe D7 bolster painted RAL 9011 graphite black * All attachments according to EU regulations Various additional equipment available. Further information upon request. Images may differ from the original. Specifications subject to change. Contact: Niclas Lott Tel.:

Stanje: novo, največja dovoljena obremenitev: 35.585 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.950 mm, višina nakladalnega prostora: 1.347 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, 3-axle semi-trailer LOGO 14XL Specifically designed for OFF- and ON-ROAD applications! * Electronic air suspension * 3 single axles, manufacturer SAF, 9 t, with disc brakes * 1st axle liftable, 3rd axle trailing and steered * Radio remote control for operating the frame locking system and the brake * Manually operated landing gear * Bolster: 8x ExTe D7 (position 1 with double pockets, position 2 adjustable and with flat stake pockets as well as quick-release wedge system) * Stakes: 14x ExTe D7 telescopic stakes, 2x ExTe D10 telescopic stakes * Tyres: 385/65 R 22.5 on steel rims * EBS braking system * LED rear lights with integrated triangular reflectors * 4x LED work lights (1,800 lumens) * Air tanks made of aluminium * 1x grab rope * 1x shunting coupling * Frame and bolster in RAL 9011 graphite black * All attachment parts according to EU regulations Bodpfogqc Eaox Ai Aelh Various additional equipment available. Further information upon request. Images may differ from original. Subject to alteration. Contact: Niclas Lott Tel.: