Berger Verbreiterbar Auf 3.2M Erste Letzte Achs Hebeax nakup rabljenega (6.671)

Stanje: rabljeno, lastna masa: 6.195 kg, največja dovoljena obremenitev: 29.805 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2015, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.610 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 91 m³, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: siv, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385 / 65 R 22,5, velikost zadnje pnevmatike: 385 / 65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: siva Dodatki v opremi Lodpfxjzcdgxs Adgoad ABS, EBS, zračno vzmetenje, kolutne zavore, vzmetenje: zrak, nosilnost (kg): 29.805 Tip nadgradnje: kesonska prikolica, dolžina x širina x višina 13.600 x 2.480 x 2.700 m, Edscha – drsna streha, zadnja portirna vrata, ponjava premikajoča na desni in levi strani (označena), BPW – osi z zračnim vzmetenjem z možnostjo dviga in spusta, 1. os dvižna os (brez funkcije), kolutne zavore, zračni priključek rdeč/rumen, elektrika 24 V – 15-polni + 2 x 7-polni

Stanje: rabljeno, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Krone 2-osna ponjavna prikolica z nakladalno ploščadjo Stranske stranice Rezervno kolo Zadnja portalna vrata Rezu odporne stranske ponjave Drsne ponjave Sprednja opora Podvozna dvižna ploščad DHollandia Krone osi Lodpfex St Acjx Adgjad Pnevmatike 385/55 R 22.5 Dodatne informacije na zahtevo

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with 'Load-Lock profile' for lashing strap attachment 24 t, 2-speed landing gear, single-sided operation Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of and behind axle assembly With anti-spray mud flaps compliant with EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fixing kit Ledpfxjri Hiho Adgoad Axles & Suspension: SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser alignment' reduces tire wear and fuel consumption 1st axle automatic lift axle, additionally electrically operable from the truck Includes forced lowering and start-up aid, no installation required on truck Brake System: 2-line compressed air braking system Spring-loaded parking brake EBS by Wabco, electronic braking system with EBS socket at the front, without connection cable With raise & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN bus signal, display via monitor Wheels and Tires: 385/65 R22.5" / 6 steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side LED marker lights (amber) 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connection cable 2 additional LED work lights at the rear, controlled via reverse light Floor: Approximately 30 mm thick phenolic plywood, mounted on continuous longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg at the bulkhead Drop-in Slats: 5 rows of aluminum V-insert slats 2 pairs of Vario steel slats, in conjunction with Vario beams for fore and aft load securing (then no insert slats required in the area of the steel slats) Rear Portal Doors: Double-winged, each with 2 internal lock rods. Tarp with welded horizontal and vertical belts Unladen weight: 5,960 kg Offer and pictures non-binding

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, Krone SZK 18 eLB41-LI | Dry Liner Box Trailer Lajdpevw Hnqofx Adged Basic Data • Vehicle type: SZK 18 eLB41-LI • Fifth wheel height (unladen): 1,150 mm Weights (Approved / Technical) • Fifth wheel load: 12,000 kg / 12,000 kg • Axle load: 18,000 kg / 18,000 kg • Gross vehicle weight: 30,000 kg / 30,000 kg Dimensions • Body dimensions: 13,620 x 2,480 mm (internal length) • Internal height: 2,715 mm • Rear portal through-loading height: 2,650 mm • Unladen vehicle height: approx. 4,000 mm • Front structure height: 100 mm (incl. floor) Axles • 2 axles, each with 9,000 kg load capacity • KRONE axles with air suspension and disc brakes • Brake disc: 430 mm • Axle group spacing: 8,135 mm • Wheelbase: 1,310 mm • Warranty: 6 years with unlimited mileage Tyres & Rims • 4x 385/65 R 22.5 M+S • KRONE Smart Tyre Monitoring • Without spare wheel Brake System • EBS 2S/2M with ABS • Spring-loaded parking brake • Brake system: WABCO Box Body • Closed body • Internal side forklift protection: 320 mm high • Front wall: steel sheet, interior 9 mm phenolic-coated plywood • Rear wall: steel container door with seal • LED light strip in the cargo area on the left • 2 ventilation louvres per side • 2 rows of lashing rails (800 mm / 1,600 mm above floor) Floor • 30 mm waterproof bonded plywood floor • EN 283 rated for forklift axle loads up to 7,000 kg Lighting • Full LED • Full-LED multifunction rear lights (Hella Gen.2) • LED side marker lamps with indicator function • Outline/brake lights at upper rear Certificates • EN 12642 Code XL • VDI 2700 Beverage Transport • Daimler Guideline 9.5 • CEMT/CM certificate Painting • Chassis: RAL 9005 Jet Black • Box body: KRONE White • Roof: RAL 9010 Pure White

Stanje: rabljeno, največja dovoljena obremenitev: 18 kg, skupna masa: 18.000 kg, velikost pnevmatike: 385/65 R 22.5, Leto izdelave: 2014, velikost sprednje pnevmatike: 385/65 R 22.5 | %, velikost zadnje pnevmatike: 385/65 R 22.5 | %, obratovalna teža: 18.000 kg, največja hitrost: 80 km/h, Oprema: klimatska naprava, osvetlitev, zavorni sistem na stisnjen zrak, Pnevmatike (spredaj): 385/65 R 22.5, Pnevmatike (zadaj): 385/65 R 22.5, Prva registracija: 2014_____, Lokacija: stranka Laodexl Sg Rjpfx Adgsd

Stanje: rabljeno, skupna masa: 20.000 kg, konfiguracija osi: 1 os, prva registracija: 08/1984, * Forced steering Laedjwip Ddopfx Adgsd * Air suspension * Tool box * Unladen weight: 4,500 kg -----Internal vehicle number: 9797----Errors and prior sale excepted.

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Ledpfx Adol Tihusgead * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough Ledpfxsl Tnvgj Adgead * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately* Lsdpfjxptn Dsx Adgoad

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026 Lajdpfspk D I Aox Adgod

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 24.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65-22,5, barva: črn, Oprema: ABS, = Additional Options and Accessories = - EBS (Electronic Braking System) - LED lighting - Air suspension - Disc brakes - Toolbox Laodpfxozba Eus Adgsd = Remarks = Internal reference number for customer inquiries: 5-143 Immediately available!!! PAVIC semi-trailer timber transport platform, hardwood flooring, 43 t technical gross weight, 13,500 mm loading length. With quick-change pocket system. Only the stanchion is pulled out; the technology is housed in the pocket. Your advantage: Standard stanchion with low weight at a moderate price. IMMEDIATELY AVAILABLE! * Chassis length approx. 13,510 mm (front frame to front frame) * Chassis width approx. 2,540 mm (outer frame to outer frame) * Ride height unladen approx. 1,400 mm at fifth wheel height 1,200 mm * Maximum kingpin load approx. 16,000 kg * Front overhang (kingpin to front edge of front frame) 1,550 mm * 2" kingpin to SAE standard, replaceable from below * Spare wheel carrier for 1 spare wheel * Front wall approx. 2,500 mm high, corners slanted with sheet metal cladding * Steel floor with 4/6 mm checker plate cover * Outer frame with rounded edges and lashings points every approx. 500 mm for load securing * First axle lift, automatic function, with start-up assistance * 3x 9t axles, available with disc or drum brakes upon request * Axle spacing approx. 1,310/1,310 mm * Premium tyres 385/65 R 22.5 * EBS brake system with Roll Stability Program * Smartboard/TIM/Info center, in addition to the H+S valve * LED light system * LED work lights * 2x plastic toolboxes * Pallet box or optionally 2x long aluminium storage boxes, custom-made by Pavic (see pictures) * With OPIPA AL10 aluminium stanchions (also available without stanchions upon request) Also available with steel flooring instead of hardwood flooring (weight difference for steel floor: +650 kg) Financing available through our finance partners. If you have any further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Tyre size: 385/65-22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Permissible total weight: 40,000 kg Body brand: PAVIC short timber platform quick-change Overall condition: very good Technical condition: very good Visual condition: very good

Stanje: rabljeno, največja dovoljena obremenitev: 29.080 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/2018, dolžina tovornega prostora: 9.550 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 2.000 mm, prostornina tovornega prostora: 43 m³, Oprema: ABS, ? Nihajna loputa z žitnim drsnikom ? Preklopna zaščita proti podletu ? Kamera za vzvratno vožnjo ? Zadnja os vodljiva ? Kolutne zavore Lasdpfx Adoyixkfeged ? Platišča iz lahke litine ? Podest ? ABS ? Dvignjena pnevmatska vzmetenja ? 1 x shranjevalna škatla ? EBS ? Podporne noge ? Drsna ponjava ? SAF osi Vse informacije brez jamstva / vmesna prodaja pridržana.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000364, lastna masa: 6.120 kg, največja dovoljena obremenitev: 28.880 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- build tolerance Overall length approx.: 13,800 mm Max. overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Lajdpfx Adoy Slhqegjd Loading height in low-bed, loaded approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis semi-trailer for haulage company Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping at the beginning of the low-bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly sloped new outer frame design with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for attaching lashing straps, mounted on the crossmember underneath the outer frame 24 t two-speed landing gear, single-sided operation, with straight lower section, without load equalizer Free landing leg corner dimension or free rear swiveling radius of approx. 1,920 mm Side underrun protection: aluminum Rear underrun protection: steel Quarter shell mudguards 9 pairs of lashing/ stanchion rails recessed across the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing between bars approx. 60 mm. Bottom with angle plate as closure, half open downwards. For securing and inserting stanchions 80 x 80 mm (3 pairs in gooseneck, 6 pairs in low-bed area) 3 pairs of stake pockets recessed in the outer frame, internal dimension approx. 72 x 42 mm Axles & Suspension: Drum brake axles as per manufacturer’s choice "Laser-measured axles/chassis" for reduced tire and fuel consumption Air suspension Brake system: 2-line compressed air braking system Color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS electronic braking system, EBS socket at front, no connecting cable Note: The trailer must only be towed by tractor units that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle stability system Wheels and Tires: 235/75 R17.5, manufacturer at the buyer’s discretion Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side lighting (recessed inward) 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets at the front, no connecting cable 1 additional LED work light at rear, switched via reverse light Floor: Approximately 30 mm thick anti-slip plywood, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / front corner stanchions: 25 mm aluminum hollow profile, 1,350 mm high Country of registration / plates: Germany Inspection and certificate in Bosnia 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red at the rear Warning sign according to ECE 70 Painting: Frame: hot-dip galvanized incl. passivation “15-year guarantee against corrosion perforation” Front corner pillars: hot-dip galvanized Front wa

Stanje: rabljeno, lastna masa: 5.950 kg, največja dovoljena obremenitev: 29.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 7.360 mm, širina tovornega prostora: 2.340 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: oranžna, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385 / 65 R 22,5, velikost zadnje pnevmatike: 385 / 65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: oranžna Lsdey Igt Hepfx Adgoad Dodatki v opremi ABS, zračna vzmetenje, vzmetenje: zračno dviganje, nosilnost (kg): 29050 Tip nadgradnje: jeklo - jeklena kesonska prikolica cca 25 m³, D x Š x V 7.360 x 2.340 x 1.500 mm, Hardox 450 - (5 mm dno / 4 mm bočne stene), BPW osi z zračnim vzmetenjem, 1. os dvižna, bobnaste zavore, aluminijasta platišča, platforma, rolo ponjava, elektrika 24 V - 15 + 2 x 7-polno, ABS, zračni priključek rdeč/rumen, podporne noge, lastna teža 5.950 kg

Stanje: rabljeno, lastna masa: 5.714 kg, največja dovoljena obremenitev: 26.786 kg, skupna masa: 32.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.320 mm, prostornina tovornega prostora: 22 m³, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: siv, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385 / 65 R 22,5, velikost zadnje pnevmatike: 385 / 65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Base colour: grey Additional equipment Laodpfx Adov Ah E Iegjd Air suspension, Suspension: air-lift, Payload (kg): 26,786 Body type: Schmitz steel tipper body L x W x H 7,300 x 2,350 x 1,320 mm, approx. 22 m³, SAF axles with air suspension including lift and lower function, drum brakes, sliding tarpaulin, aluminium rims, red/yellow air couplings, 15-pin electrics, ABS

Stanje: rabljeno, lastna masa: 6.341 kg, največja dovoljena obremenitev: 29.659 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2021, naslednji pregled (TÜV): 09/2025, dolžina tovornega prostora: 13.639 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.955 mm, prostornina tovornega prostora: 99 m³, vzmetenje: zrak, velikost pnevmatike: 435 / 50 R 19,5, barva: srebrn, vrsta prenosa: drugo, velikost sprednje pnevmatike: 435 / 50 R 19,5, velikost zadnje pnevmatike: 435 / 50 R 19,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Base colour: silver Laedjvhtmzepfx Adgjd Equipment extras: ABS, EBS, air suspension, disc brakes, suspension: air-lift, payload (kg): 29,659 Body type: jumbo trailer, L x W x H 13,630 x 2,480 x 2,955 mm, galvanised subframe, Schmitz axles with air suspension featuring lifting and lowering, disc brakes, 1st axle is a lift axle, sliding curtain on both sides (neutral), lifting roof, Edscha system, aluminium insert slats, RSAB

Stanje: rabljeno, lastna masa: 7.313 kg, največja dovoljena obremenitev: 31.687 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 13.630 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.600 mm, prostornina tovornega prostora: 87 m³, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: srebrn, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385 / 65 R 22,5, velikost zadnje pnevmatike: 385 / 65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: srebrna Dodatki v opremi ABS, zračna vzmetenje, kolutne zavore, vzmetenje: zračno-dvižna os, nosilnost (kg): 31.687 Tip nadgradnje: ploščati polpriklopnik D x Š x V 13.630 x 2.480 x 2.600 mm, podvozje vroče pocinkano, škatla za palete (24 Euro), Schmitz osi s kolutnimi zavorami, prva os dvižna, sistem za polnjenje pnevmatik, Speed Curtain Sider desno in levo s certifikatom za tovor DIN EN 12642 Koda XL za pijače VDI 2700 in Daimler - Smernice za pritrjevanje tovora 9,5, zadnja vrata portala (nevtralizirana), Edscha odpiranje spredaj in zadaj, RSAB, vzvratna kamera, zračni priključki rdeča/rumena, 2 x 7-pol. + 15-pol. vtičnica, ABS, NOVA CENA ? 43.000,-- neto. Laodpfx Adeyrnrwjgsd

Stanje: rabljeno, največja dovoljena obremenitev: 15.620 kg, skupna masa: 22.000 kg, konfiguracija osi: 1 os, prva registracija: 09/2018, dolžina tovornega prostora: 11.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Skupna masa: 22.000 kg Lastna masa: 6.380 kg Nosilnost: 15.620 kg Lasdpfxsxudp No Adgjd Skupna dolžina: 11.345 mm Dolžina nakladalne površine: 11.300 mm Širina: skupna širina 2.550 mm / nakladalna širina pribl. 2.480 mm Nakladalna višina: pribl. 1.100 mm Dodatne informacije - Nakladalna ploščad Dhollandia pribl. 2.000 mm - Dvojna montaža koles - SAF osi - Zračno vzmetenje - Zadnja zaščita proti podvozu - Škatla za orodje - Prednja stena pribl. 3.250 mm

Stanje: rabljeno, številka stroja/vozila: WFDFLT33902030059, lastna masa: 7.452 kg, največja dovoljena obremenitev: 27.548 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 92 m³, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", barva: črn, The images are archive photos; the vehicle may still be in use! Ledpswk Dc Rofx Adgoad Weights and dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Specified fifth wheel load permissible / technical: 11,000 / 12,000 kg Unladen weight (standard version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Coupling height approx.: 1,130 mm Kingpin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis: Semi-trailer for freight forwarding High-tensile steel welded lightweight construction up to the support legs, fifth wheel plate with replaceable 2" kingpin Lashing ring preparation laterally in the floor (max. 13 pairs) 24 t 2-speed landing gear, one-sided operation, with straight lower section, no load equalizer Pull-out ladder at the rear Door retainers on the sides Wheel chocks with holders Side underrun protection made of aluminum Steel underrun protection with wide Fliegl mud flaps Foldable fender for light unit Quarter shell mudguards Rear impact guard Axles & Suspension BPW disc brake axles Air suspension 1st axle is an automatic lifting axle with forced lowering and start-up aid, activated via triple brake application Brake system 2-line compressed air braking system Colored line routing for easier maintenance Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Flow rate: 110 l/min Pressure: 250 bar Oil reservoir minimum: 100 l SB Body Box-shaped aluminum body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow profiles, welded all-around with a large special reinforcement profile at the top, with a special subframe welded in at the bottom. Moving wall for improved unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made from aluminum hollow profiles, as two-leaf doors, split 1/2 to 1/2, all-around with special U-profile with stop and rubber gasket, fitted with 2 external rotary bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in driving direction. With pivoting transverse brace at the top. Standing platform with ladders on both sides (left/right in direction of travel) and railing for opening and closing the sliding roof tarp. Removable, swiveling cross bars for tarp support + tarp support at front bulkhead and rear wall. Sliding tarp can be rolled to one side with 2 longitudinal tensioning straps, 3 side ratchet straps. At the front bulkhead and above the rear doors, the tarp is secured with hooks and rubber

Stanje: rabljeno, številka stroja/vozila: W09SHL335ATM08351, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.700 mm, Leto izdelave: 2010, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj = Dodatne informacije = Teža Nosilnost: 36.000 kg Dovoljena skupna masa: 7.140 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Videz: povprečen Dodatne informacije Lsdpfx Adszclcbjgjad Stanje pnevmatik spredaj: 40 % Stanje pnevmatik zadaj: 40 % Pnevmatike spredaj: 385/65 R 22.5 Pnevmatike zadaj: 385/65 R 22.5 Zadnji pregled: 2026-06-04 Dodatne informacije Za več informacij se obrnite na Lastas Sales.

Stanje: rabljeno, številka stroja/vozila: W09SKS27BG7S11262, konfiguracija osi: 3 osi, Leto izdelave: 2016, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj = Dodatne informacije = Teže Nosilnost: 46.450 kg Dovoljena skupna masa: 8.020 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Lodpfx Adozclb Dogjad Vizualno stanje: povprečno Dodatne informacije Stanje pnevmatik spredaj: 20% Stanje pnevmatik zadaj: 20% Pnevmatike spredaj: 385/65 R 22.5 Pnevmatike zadaj: 385/65 R 22.5 Zadnji pregled: 2026-06-04 Dodatne informacije Za več informacij kontaktirajte Lastas Sales.

Stanje: novo, skupna masa: 22.000 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 11.105 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, PRSSQTri 09-SYS with Body, 1-Axle, Tail Lift Twin Tyres 22.5, TRIDEC Curtainsider Body, side height 2600 mm from loading floor to lower edge of exterior rail Maximum steering angle: 31° Mechanical steering system with 1 drag link for steering a single axle Chassis width approx. 2480 mm Fifth wheel load max. approx. 12,000 kg Landing leg position approx. 2300 mm from kingpin Chassis length approx. 11,105 mm Axle loads: 10,000 kg Ride height unladen approx. 1300 mm with 1150 mm fifth wheel height Approval with COC documents *External frame height approx. 125 mm, with groove for lashing rings, base thickness approx. 4 mm, with outer lashing holes 11 pairs of lashing rings on the outer frame Lasdog Dkyqspfx Adgod (Tested lashing capacity 5t per lashing point) 24 t telescopic landing gears Axle Free choice of axle make by WEB Trailers (SAF/BPW/Jost) Axle with large disc brake Axle 10t, disc 22.5", twin tyres Air suspension unit per 10 t Lifting and lowering device Coupling heads red and yellow Lifting and lowering device mounted at the right rear in driving direction 2 air tanks approx. 80 l each, steel, painted black EBS brake system, brand Knorr or Wabco incl. RSS Tyre pressure monitoring system 4 branded tyres 275/70 R 22.5 on steel rim (brand according to WEB Trailer’s choice) Tail Lift Platform with roll-off protection Platform steel – chequered plate Front connector for tail lift as Rema socket (without batteries! optional) Tail lift as per our choice, 2.5t Documentation, manual, etc. Operation via control in box at rear right and remote control with spiral flex cable in upper right of body Platform height approx. 2000 mm (standard, lockable at rear) Indicator lights on the tail lift platform Fusing and reverse polarity protection on positive and negative leads (red + blue) Brand of tail lift as per WEB Trailer’s choice Body certificate to DIN EN 12642 XL (for 27t payload+tail lift) with at least 2 rows of wooden insert slats and locking at the top of the platform Conspicuity markings on tarpaulin and rear portal ECE signs on tail lift Rear position lights in red (LED, upper mounting) Sliding roof fixed at rear Top flap for tail lift with gas strut Front position lights (upper & lower, white with reflectors, LED) 3 sets of side roller curtains, manufacturer as per WEB’s choice Front wall: steel standard with 400 mm steel cassettes Inner wear plate approx./max. 2.40 m 3 rows of plug-in wooden slats Lighting system 24 V LED, with compact multifunction taillights 15-pin connector Side marker lights with indicator function Reinforced roof tarpaulin, 12x12 roof fabric Tension ratchet at the rear, release only at the front 2 steel bumpers at rear corners Plastic mudguards, 180 degrees Anti-spray mudflaps Side underrun protection on both sides, aluminium, steel profile or plastic Body certificate to DIN EN 12642 XL Coating/Paintwork: Chassis paint in RAL 9005 or Nova Grey 7350; other colours available at extra charge, only if powder available KTL coating with zinc phosphating plus powder, highest corrosion protection Hot dip galvanizing optional Body colours in RAL of choice Approval: COC Ex works price Attention!!! Pictures show special equipment Consultation and a free, non-binding quotation available. Leasing, financing, and hire-purchase possible! We are happy to tailor to your requirements! Contact us for an offer. Errors and prior sale excepted!

Stanje: novo, lastna masa: 9.600 kg, največja dovoljena obremenitev: 53.400 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: siv, Oprema: ABS, Platform area: - Platform with approx. 30 mm thick hardwood flooring - 10 pairs of folding lash rings (outward folding) Landing legs: - JOST landing legs with 2-speed gearbox, 24 t lifting capacity Laodpsrq Dlfsfx Adged Axles and tyres: - BPW axles, technical capacity 10,000 kg per axle; first axle fixed, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise/lower valve - Axle tools included - Tyres: 385/65 R22.5 Braking system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrical system: - Electrical system according to EU regulations, 24 Volt lighting - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S and 15-pin sockets - Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component zinc-dust primer - High-quality 2-component topcoat, single-colour in Nova Grey - Rear section metallized and painted in RAL 9010 Accessories included: - Platform with approx. 30 mm thick hardwood flooring - 2" king pin - One galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks with holders on the front wall - Storage for 1,000 mm plug-in stanchions in the rear central beam - On the gooseneck and rear panel, left and right, a mounting bracket for warning signs with socket - Remote steering from front and rear, operated via cable remote control with push-buttons; with axle tracking control - Electro-hydraulic power pack - White reflective tape as per EU regulations along the side of the trailer, red at rear - 12 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load bed - European reflective plates at the trailer rear - One bracket for a rotary beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable protector for the pump - TPMS tyre pressure monitoring system: - The towing vehicle must be capable of transmitting and displaying these data for correct readout - Lift axle on the front axle, automatically controlled by TEBS E in accordance with current axle load and trailer loading status - Radio remote control for the remote steering in addition to the cable remote, with indicator lamps on the receiver for axle tracking control - 5 pairs of crosswise stanchion pocket strips on the bed for 100 x 50 mm plug-in stanchions - 80 km/h speed stickers at rear and both sides - Adjustable access ladder mounted left and right in direction of travel - 2 reversing lights mounted at the rear panel - Load gauge for determining axle loads, including load diagram - HRM metallization of the outer frame: complete steel structure shot-blasted, then all designated visible areas hot metalized with ZINACOR 850 (Zinc 85% - Aluminum 15%)

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 235/75 R17.5, barva: siv, obratovalna teža: 11.000 kg, Oprema: ABS, Chassis: Lsdpfxoiu Eu Ns Adgjad - Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer - Neck and kingpin plate 225 mm - Lowered bed rated for 25 t point load over 5 m - Outer frame closed to the outside with welded-on lashing rings for securing - Interchangeable 2" king pin - Rear hook-in rail for aluminum ramps Axles and Tyres: - BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tyres 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate) - 6 pairs of mushroom anchors in outer frame in the lowered bed - Storage box with lid in the lowered bed floor, front left and right Front Wall: - 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener - Tarp extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for separate tarpaulin extension piece - 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank - With belt pockets Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door holders - Each door wing with aluminum double-joint hinge and two recessed grip hollows Front Corner Posts: - Roof height, bolted to front side Central Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length via trolley - Middle posts in the lowered bed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area) - Rear portal cross beam swivels away - PVC tarpaulin roof without customs closure - Manually operated hydraulic lifting roof on both sides, lift 450 mm - Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height - Including tarpaulin extension and apron at rear - Roof can be cranked out 900 mm at front wall Accessories: - Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm - Storage for 4 warning signs on inside of front wall, top right and left - 1 aluminum ladder with holder 2,500 mm long on front wall - 2 rows of self-securing aluminum slats - Metal mudguards with splash flaps - 1 overnight parking plate and 1 ADR plate on rear wall - BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points - Electrohydraul

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain Lodotvfkfspfx Adgoad - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined