Stas 88 Cbm, Cargofloor 10 Mm, 2X Liftachse, Optiturn nakup rabljenega (39.388)

Stanje: rabljeno, največja dovoljena obremenitev: 34.130 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 10.149 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 3.822 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, Condition: Like NEW Mileage: 62,270 km Internal dimensions (LxWxH): 10,149 x 2,350/2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,820 kg Z-chassis in cranked design Continuous 5 mm Hardox steel (HB450) floor Front wall and side walls: 4/3 mm Hardox steel (HB450) Slanted front wall with internal ascent 2-wing portal doors, pneumatic post-unlocking GRAIN SLIDE with dust protection bag Reinforced roof roll tarpaulin HYVA tipping cylinder, Alpha type, suitable for high and low pressure Full-load crank landing gear 2x air vibrators mounted underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with starting aid WABCO Trailer EBS with RSS anti-skid system WABCO Smartboard Automatic tipping lowering device Raise and lower mechanism Cjdpfsyl Tfvsx Albjgw Tires 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminum rims Aluminum access ladder Shovel and broom holder Toolbox on the right 4x LED reversing spotlights RENTING is the new BUYING: with us, immediately available also under FULL-SERVICE RENTAL-----

Stanje: rabljeno, največja dovoljena obremenitev: 34.725 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration: 10/2024 Mileage: 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical body in width) Unladen weight: only 7,275 kg Z-chassis, cranked version Continuous 5 mm Hardox steel HB450 floor Front and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, internal access ladder 2-wing rear portal doors, pneumatic remote unlocking 1 piece GRAIN SLIDE in the right door wing Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder Type Alpha, suitable for high and low pressure ALU landing legs, full-load rated 2x air vibrators below the body Cjdeyy Hakspfx Albjgw SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE with traction aid WABCO Trailer-EBS with RSS rollover protection WABCO SmartBoard Automatic tip lowering Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, and with us also available immediately in FULL-SERVICE RENTAL-----

Stanje: rabljeno, največja dovoljena obremenitev: 34.900 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2021, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.280 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 3.861 mm, Leto izdelave: 2021, Oprema: ABS, STAS 3-osovinski Hardox čelični kiper 55 cbm "AGRAR-LINER" Prva registracija 04/2021 Pređena kilometraža 203.910 km Dimenzije unutrašnjosti (D x Š x V): 10.000 x 2.350/2.450 x 2.280 mm (konusni oblik) Sopstvena težina samo 7.100 kg Šasija u obliku slova Z, savijena izvedba Pod celom dužinom od 3 mm Hardox čelika HB450 Prednji i bočni zidovi od 3 mm Hardox čelika HB450 Kosi prednji zid, unutrašnji pristup sa stepeništem Jednokrilna ALU kombinovana vrata s klatnom funkcijom, pneumatsko odvajanje 1 komad klizni otvor za žito Krovna rolo cerada, ojačana izvedba HYVA kiper cilindar tip Alpha, pogodan za visok i nizak pritisak ALU sedlaste noge za potpuni teret 2x vazdušna vibratora ispod nadogradnje SAF osovine sa velikim disk kočnicama, 430 mm 1. osovina podizna osovina WABCO prikolica-EBS sa zaštitom od prevrtanja RSS WABCO Smartboard Uređaj za podizanje i spuštanje Pneumatici 385/65 R 22.5 Csdsy Nvrzepfx Albogw Aluminijumske merdevine za pristup Držač za lopatu i metlu Kutija za alat sa desne strane 4x LED svetla za vožnju unazad IZNAJMLJIVANJE je nova KUPVINA, kod nas odmah dostupno i u FULL-SERVICE najmu-----

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, naslednji pregled (TÜV): 08/2023, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.740 mm, prostornina tovornega prostora: 90 m³, Leto izdelave: 2021, Oprema: ABS, ecoSTAR 90 m³ barva: grafitno črna ECOSTAR FE PODVOZJE - V13500 - NAVPIČNA PREDNJA STENA - NAVPIČNA ZADNJA VRATA Notranja dolžina nadgradnje: 13.500 mm Notranja širina nadgradnje: 2.475 mm Notranja višina nadgradnje: 2.650/2.740 mm Volumen nadgradnje: 90 m³ Višina sedla: 1.150–1.180 mm TEHNIČNI OPIS 1. OKVIR POMOŽNI OKVIR: kakovostna jeklena konstrukcija iz S355JR (= ST52.3). Šasija ni lakirana, ampak pocinkana (EN ISO 1461), vroče cinkana. PREME: Tridem; proizvajalec: SAF - CUSTOM DESIGN (CD); nosilnost: 3 x 9 t; vzmetenje: original SAF zračno vzmetenje; zavore: velike kolutne - INTEGRAL; sled: ET 120; BVA: z INDIKATOR OBRABE ZAVOR FUNKCIJA DVIGOVANJA OSI: tretja os je sledilno vodena (notranja višina spredaj/zadaj 2.650/2.740 mm), prva os je dvižna os. ASISTENCA PRI ZAGONU: aktivira se s pritiskom na gumb v tovornjaku (oprema tovornjaka ni vključena). ZRAČNO VZMETENJE: Dvig in spust, aluminijasti zračni rezervoar. PNEVMATIKE: 6 x 385/65 R 22.5 na jeklenih platiščih. ET 120. NOŽICE ZA POLPRIKLOPNIKE: JOST modul s kompenzacijskimi nogami za vozila z zračnim vzmetenjem; vodenje z enostranskim upravljanjem in 2 prestavama. ZAVORNI SISTEM - EBS: WABCO EBS-E sistem 2S/2M - PREMIUM MODULATOR; dvovodna tlačnozračna zavorna napeljava po CE smernicah. Parkirna zavorna vzmet na 2 oseh. S SMARTBOARD. R.S.S. (Roll Stability System). RAZSVETLJAVA - ASPÖCK 24 V električna oprema. 2 x 7-polna in 1 x 15-polna vtičnica. ZADNJA OSVETLITEV V ZAŠČITI PODVOZJA: z aluminijasto zaščito (zložljiva). 2 x petkomorni svetilki - EUROPOINT III, LED verzija. DELOVNA SVETILA NA OKVIRJU: 2 x LED delovni svetilki WORKPOINT pred osmi in 2 x za osmi - s stikalom na kontrolni konzoli. DODATNA DELOVNA SVETILKA: 1 x LED na prednji steni (notranja desna stran) s sprednjim stikalom. HIDRAVLIČNI SISTEM: tlak: ? ženski; povratek: 1 ženski. HIDRAVLIČNI PRIKLJUČEK: na prednji steni; dodatna možnost priklopa pod nadgradnjo pred podporami. Aluminijasta nadomestna lestev (3,7 m), pritrjena na desni bočni zaščiti. IZVLEČNA ZADNJA LESTEV, integrirana zadaj desno na vozilu. PNEVMATSKO CENTRALNO ZAKLEPANJE: z 1-delno pokrivno ploščo (talna ponjava ni mogoča). ORODJARNICA iz PVC s ključem (800 x 460 x 430 mm), zadaj levo. NAMESTITEV KRMILNE KONZOLE IN TEM KABINETA: montirani zadaj levo; kontrola iz tal prav tako zadaj levo. BLATNIKI: 6 posameznih plastičnih blatnikov, 2 zaščitni gumi Clear Pass trajno nameščeni na plastiko. 2. KIPERSKA KAD PREDNJA STENA: iz 30 mm debelih aluminijastih profilov tip 600 s ojačanimi vogali. NOTRANJE TESNJENJE MED TALOM IN PREDNJO STENO: trajno tesnilo iz alu profila in PVC zatesnitve. STRANSKE STENE: gladka izvedba znotraj in zunaj, dvojna stenska profila 600 mm širine, 30 mm debeline - 3 mm notranja, 2 mm zunanja pločevina (izvedba za žita). Stranski profili so znotraj neprekinjeno zvarjeni. Cgsdszfdgiopfx Albew PREVLEČNI TLAK - SISTEM CARGO FLOOR CF 500 SL-C: električno upravljanje, 21 talnih desk, pogonski agregat s 3 dvosmernimi hidravličnimi cilindri, hod 200 mm, zadnja obloga iz aluminija. UPRAVLJANJE TALNEGA SISTEMA: električno z radijskim daljinskim upravljalnikom (original Cargo Floor + multifunkcijska upravljalna enota).

Stanje: novo, širina tovornega prostora: 1.600 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 10 m³, skupna širina: 1.670 mm, skupna višina: 2.000 mm, Leto izdelave: 2025, 2 units immediately available from stock 1x RAL 7011 Iron Grey 1x RAL 5010 Gentian Blue Skip container according to DIN 30720 Open design Type: AM 2.10 Useful volume: approx. 10 m³ Cedpfx Aovz Rgfjlbogw Paintwork: RAL 7011 (Iron Grey) - Asymmetric design with single tipping bearing at the discharge edge - Lifting lugs for skip loader systems according to DIN 30720 - Base tray made of 6 mm St 37.2 (S235JR) - Side walls made of 4 mm St 37.2 (S235JR) - End profile made of U 100 x 50 x 4 - All corners reinforced - Container primed once inside, double primed outside and double-coated in single colour on the outside - UVV safety decals with safety instructions - Container tested and certified according to UVV (formerly BGR 186) Offer non-binding, without warranty or guarantee. Subject to prior sale. Sale is only concluded upon receipt of payment. The vehicle remains our property until full payment is received. We accept payments in Euros only, with no additional costs for the seller, and only by bank transfer or cash. No cheques. Prices are per unit.

Stanje: novo, konfiguracija osi: 3 osi, prostornina tovornega prostora: 55 m³, Oprema: ABS, ferroSTAR 55 cbm Material podvozja: jeklo Tip podvozja: Z-šasija Nosilnost konjske glave National (t): 12 Nosilnost osi National (t): 8 Medosna razdalja (mm): 1310-1310 Višina vpete prikolice (mm): 1150 Širina šasije (mm): 1400 Najširše šasije na trgu z 1400 mm za maksimalno stabilnost in varnejše upravljanje. Širina nakladanja (mm): 2325 Notranja višina spredaj (mm) (IHF): 2.285 Notranja višina zadaj (mm) (IHB): 2.285 Nakladalna dolžina (mm): 10149 KC-vrednost: 0650 Skupna širina (mm): 2550 Volumen (m³): 55,00 Medosna razdalja (mm) (WB): 6.600 Skupna dolžina (mm): 11.501 Osi: SAF Verzija osi: Intra Tip zavor: Kolutna zavora Tip zavore: SAF - SBS 2220 (Haldex) Ugreznitev (ET): 120 Opcija 1. os z dvižno osjo in pomočjo pri speljevanju Aktivacija pomoči pri speljevanju preko gumba v tovornjaku (namestitev gumba ni vključena v obseg dobave) in s potrojitvijo zavore Opcija 3. os z dvižno osjo Indikator obrabe zavornih oblog priklopljen Return-to-ride (RTR): 15 km/h Zaščitna plošča zračnih mehov Zračno vzmetenje ECAS z dvigalnim in spuščalnim ventilom Samodejno spuščanje zračnega vzmetenja med kipanjem, ročno blokirano preko pametne plošče in stikala na šasiji Pnevmatska spojka: evropska "palm coupling" (dlani spojka) Csdpfx Aozdw Ttolbsgw Upravljalna konzola EBS na levi strani v smeri vožnje pred osmi Standardna pametna plošča (Smartboard) Konzola za zrak in elektriko na desni v smeri vožnje Podporni vijaki tip JOST MODUL Dimenzija pnevmatik: 385/65R22.5 Sistem za nadzor tlaka v pnevmatikah: Wabco OptiTire Platišča: Alcoa Dura Bright Tip TPMS senzorja: senzor pritrjen na platišču Dobavitelj TPMS senzorjev: ZF Kromirane kapice matice koles Proizvajalec razsvetljave: Aspöck Tip razsvetljave: ECOLED III - z logotipom STAS Vzvratna luč: 2x LED vzvratni luči, zadaj levo in desno v smeri vožnje, nameščeni na nosilcu luči Pozicija delovnih žarometov (aktivacija s stikalom): 2x LED vzvratni žarometi spredaj levo in desno v smeri vožnje, nameščeni v območju podpornih vijakov Upravljanje podvozne zaščite ročno Zaščitni gumijasti nadstavek podvozne zaščite, črne barve z logotipom STAS Znamka kiper cilindrov: Hyva (izbor proizvajalca STAS) Tip kiper cilindra: cilinder z majhnim ohišjem Kot kipanja cilindra: normalno ±47° Model kiper cilindra: Hyva - FC 169 Hod kiper cilindra: 7130 Največji tlak PTO za kiper: 250 Hidravlična spojka: rotacijska spojka Velikost hidravlične spojke: 1 Spol hidravlične spojke: ženski Cev hidravlične spojke: 2.100 mm Blatniki: Domar STAS z belo črto Tip brizgalnega blatnika: Clear Pass Orodjarna na levi strani v smeri vožnje pred osmi Aluminijasta lestev dolžine 2,8 m, nameščena na desni v smeri vožnje Pozicija držala za metlo in lopato: po 3 držala, nameščena na podvozje levo v smeri vožnje Manometer za tlak pri nakladanju Ø 100 mm - nameščen spredaj na podvozju Dva plastična podpornika za kolesa Varnostni zadrževalni sistem podvozja - nadgradnja gumijasti polipi Prednja stena iz 3 mm HB450 Stranska stena iz 4/3 mm HB450 Dno iz 5 mm HB450 Položaj gumijaste podloge pod talnimi prečkami Zadnja stena tipa krilna vrata Zadnja stena iz 3 mm HB450 Število tečajev zadnje stene: 3 para tečajev za vrata Izvedba krilnih vrat: delitev 1/2 na 1/2, z 1 kosom zaklepa za odpadke Odpiranje vrat najprej desno Pritrditev odprtih vrat s pomočjo verige Tesnilo zadnje stene: gumijasto tesnilo na spodnjem delu, stransko zaključeno na 1.000 mm Dodatno zaklepanje zadnje stene pnevmatsko

Stanje: rabljeno, največja dovoljena obremenitev: 32.447 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, STAS 3-osý Hardox oceľový sklápací náves 86 m³ Prvá registrácia 01/2023, od prvého majiteľa Najazdených 171 700 km Vnútorné rozmery (d x š x v): 13 110 x 2 350/2 450 x 2 770 mm (konická konštrukcia) Prevádzková hmotnosť: 9 640 kg Podlaha z jedného kusa 5 mm Hardox ocele HB450 Predná stena a bočné steny z 3 mm Hardox ocele HB450 Pneumaticky sklopná zadná spodná zábrana Rovná predná stena, vnútorný výstupný rebrík Zadné portálové dvere 50:50, pneumatické diaľkové odistenie HYVA vyklápací piest typ Alpha, nízkotlakový 2x pneumatický vibrátor Cgedpfezahunsx Albow JOST kľukové sedlové opory s plnou nosnosťou SAF nápravy s veľkými 430 mm kotúčovými brzdami 1. náprava zdvíhacia náprava WABCO prívesová EBS so stabilizačným systémom RSS WABCO Smartboard Zdvíhacie a spúšťacie zariadenie Automatické zníženie pre sklápanie Pneumatiky: 6x 385/55 R 22.5 ALCOA disky z lešteného hliníka Dura-Bright Hliníkový rebrík Držiak na lopatu a metlu Náradový box vľavo 4x LED cúvacie svetlá PRENÁJOM je novým NÁKUPOM – u nás okamžite dostupný aj ako full-service prenájom

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 27 m³, Leto izdelave: 2026, Oprema: ABS, Nemško vozilo Novo vozilo iz zaloge na voljo več enot 27,2 m³ aluminijasta kesonska nadgradnja višina nakladanja 3120 mm višina sedla 1250 mm zrnati drsnik Codpszfunwofx Albogw dvižna os oporne noge za polno obremenitev 430 mm kolutne zavore LED vzvratne luči samodejno spuščanje pri kipanju merilnik tlaka za nakladanje rol cerada 8 mm dno zadaj prečne prečke in še več... najem, nakup, financiranje z odkupom najem s celovito storitvijo od 690 EUR mesečno – vse podrobnosti najdete na Primer financiranja z odkupom: mesečno 610 EUR neto pri dobi 48 mesecev, začetno plačilo 7.500 EUR neto in zaključni obrok 5.000 EUR neto. Vse cene so neto, brez DDV in pod pogojem pozitivne ocene bonitete Nemško vozilo Novo vozilo iz zaloge večkrat na voljo 27,2 m³ aluminijasta kesonska nadgradnja Nakladalna višina 3120 mm Višina sedla 1250 mm Zrnati drsnik Dvižna os Polno podporne noge 430 mm kolutne zavore LED vzvratne luči Avtomatsko spuščanje pri kipanju Merilnik tlaka za nakladanje Rol cerada 8 mm dno zadaj Prečne prečke in še več...

Stanje: rabljeno, največja dovoljena obremenitev: 30.070 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 9.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.700 mm, skupna širina: 2.550 mm, skupna višina: 3.830 mm, Leto izdelave: 2014, Oprema: ABS, * Zadnja vrata portala z žitnimi loputami * Podest s pokrivno ponjavo * 1. os dvižna * 3. os dvižna (okvarjena) * Wabco SmartBoard * Wabco Trailer EBS-E Remorque * SAF osi z kolutnimi zavorami * Platišča iz lahke litine * Stranske omarice ----* Dimenzija pnevmatik: 385/65R22,5 Cgjdpfxozhfa Ne Albew * Tehnična skupna masa: 39.000 kg * Lastna teža: 5.930 kg * Skupna dolžina: 11.085 mm * Medosne razdalje: 5.490 + 1.310 + 1.310 mm * Tehnični pregled (SP) veljaven do: 11.2026 ----Številka vozila: 12194----Napake in vmesna prodaja pridržane----Reklame in različni napisi so bili digitalno odstranjeni. -----Z veseljem smo vam na voljo za vse formalnosti, ki nastanejo pri nakupu vozila. Sporočite nam svoje želje in predloge, za vse ostalo poskrbimo mi. Poleg tega vam lahko proti doplačilu ponudimo naslednje storitve:----Odkup vašega starega vozilaTÜV/SP pregledPopolna izvedba izvozne dokumentacijePosredovanje financiranjaPridobitev izvozne registracijePrevoz vozilaRegistracija vozilaReševanje in prevoz vozil----?VAŠA EKIPA VTS

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 68 m³, Leto izdelave: 2026, Oprema: ABS,

Stanje: rabljeno, lastna masa: 5.880 kg, največja dovoljena obremenitev: 33.120 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2026, vzmetenje: drugo, vrsta goriva: bencin, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, ABS/EBS Kolutne zavore Zračno vzmetenje Dvigalna os Aluminijasta prekucna korita WZK, podest Csdjy Nnmqspfx Albsgw nevtralno 2x žitni drsniki Portalna vrata Paletna širina Drsna ponjava 6x poliranih aluminijastih platišč Nemško vozilo + dokumenti Poškodovano v nesreči Lokacija v bližini 39120 Magdeburg ... Vzmetenje: zračno - dvižno, rabljeno vozilo, vključno z DDV.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.355 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 608 m³, skupna širina: 2.550 mm, skupna višina: 2.165 mm, Leto izdelave: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load (national): 12 t * Axle load (national): 8 t * Axle spacing (mm): 1310-1310 * Coupling height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-value: 0800 * Total width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Total length (mm): 12355 * Brake version: Disc brake * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Activation of traction aid via push button in the truck (installation of button not included in scope of supply) and by threefold actuation of the brake pedal * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake lining wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as switch on chassis * Pneumatic coupling head: European palm coupling * Control console: EBS controls on left side in direction of travel, in front of axles * Standard Smartboard * Landing gears: Weweler * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tire type: Regional * TPMS sensor type: rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Work lamp position (activated by switch): 2 LED reversing lights rear left and right, mounted on lamp bracket * Work lamp position (activated by switch): 2 LED reversing lights front left and right, mounted in area of landing gears * LEDs in door end crossmember: 2 x 3-function LED * Underrun protection operated manually Cjdjy Dmv Hopfx Albogw * Spray flaps underrun protection: Black with STAS logo * Cylinder tipping angle: Normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Tipping cylinder max. pressure: 250 * Surface treatment of cylinder stages: Standard surface * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Splash guard type mudguard: Clear Pass * Toolbox: 860x520x500 * Air connection left side, mounted on lamp carrier * 3 m aluminum access ladder * Two plastic chocks * Safety device chassis - body: Rubber polyps Body: * Front wall slope (°): 90 * Rear wall slope (°): 90 * Inner lower rail profile slope (°): 90 * Front wall: 4 mm (Aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads mounted below the floor crossmembers * Rear wall type: Combination door * Rear wall: Aluminum * Combination door type: 1/2 - 1/2 with swivelling door end crossmember * Door end crossmember in swivelling design * Slide position: 2 pieces, left + right * Additional rear wall locking: Pneumatic double-acting * Operation of additional lock: automatic during unloading, additionally manually via control on the side of the control panel * Quantity and position of bows: 3 center bows (centrally, evenly spaced) and 1 rear bow (at rear) * Bow type hinge position: right

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.613 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 604 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Specification: * Chassis type: moving floor * Kingpin load (national) (t): 12 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 Cgodpfx Aljy I Hr Nobow * Wheelbase (WB) moving floor trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10613 * Neck height chassis (mm): 240 * Overall width (mm): 2550 * Volume (m³): 60.4145 * Overall length (mm): 11420 * Axles: JOST * Brake type: disc brake * Brake system: JOST - DCA-T7 (Knorr-Bremse) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Traction aid activation via push button in truck * Option: 3rd axle with lift axle and Optiturn, additional lift axle control activated via Wabco Smartboard * Brake pad wear sensor connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * EBS operating console on left side in direction of travel, ahead of the axles * Standard Smartboard * Central air and electrical console with tower * Landing gear: aluminium drop legs * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura-Bright * TPMS sensor type: rim-mounted sensor * TPMS supplier: ZF * Wheel nut covers: chrome with STAS logo * Lighting type: ECOLED III with STAS logo * Reversing lights: 2 units * 2 LED reversing lights at rear left and right behind the axles * 2 LED reversing lights at front left and right in the area of the landing gear * 1 unit inside front wall, driver's side * Lighting unit protection: one-piece fender * LED in door header crossbeam: 2 x 3-function LED * Underrun protection * Mudflap for underrun guard, black, with STAS logo * Operator console for moving floor: left behind the axles * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 3/4" * Hydraulic coupling gender: female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling size: 1" * Hydraulic return coupling gender: female * Hydraulic hose length: 3,000 mm * Hydraulic connection position: front wall * Hydraulic coupling type: standard design * Hydraulic positioning: press return pressure left, return right (CON) * Tool box: plastic * Air connection in tool box * Aluminium access ladder, 2.5 m, extendable * Broom and shovel holder * Two plastic wheel chocks * Front wall angle (°): 90 * Rear wall angle (°): 90 * Service door: driver's side * Side wall profile: 3 mm - 2 mm * Moving floor system make: Cargo Floor * Floor system operation: radio remote control * Moving floor system: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Floor profile type: 11 mm smooth, overlapping, aluminium moving floor end plate * Oil temperature sensor for moving floor system * Clean-out partition: aluminium with brushes * Clean-out partition mounting: 6 rollers with bi-directional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall material: aluminium * Impact protection for rear doors: aluminium ramp buffers * Number and position of posts: 2 middle posts (centrally and evenly spaced), 1 rear post (at the back) * Curtain pole holder, straight design: 4 units, right side wall * Catwalk/ladder * Catwalk at front wall * Foldable A-sign * Fixed aluminium cover plate between floor and front wall.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 476 m³, skupna širina: 2.550 mm, skupna višina: 2.165 mm, Leto izdelave: 2026, Equipment: * Chassis material: aluminum * Chassis type: V-chassis * King pin load (National standard, t): 12 * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal front height (mm): 2165 * Internal rear height (mm): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Total width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm): 5800 * Total length (mm): 10259 * Chassis * Axles, brakes, and suspension * SAF axles * Wheel offset (ET): 120 * Option: 1st axle with lift axle and starting aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco SmartBoard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping, manually lockable via SmartBoard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS controls on left in direction of travel, ahead of axles * Standard SmartBoard * Air and electric console on right in direction of travel * Landing gears: Weweler, steel gearbox landing gears, Weweler type, with compensation feet, single-sided operation, and 2-speed * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional use * TPMS sensor type: rim-mounted sensor * TPMS sensor * Wheel nut caps: chrome with STAS logo * Work lamp positions (switched): 2x LED reverse lamps rear left and right in direction of travel, mounted on lamp bracket * Work lamp positions (switched): 2x LED reverse lamps front left and right in direction of travel, mounted in landing gear area * LEDs in rear door cross member: 2x 3-function LED * Manual control for underrun protection * 2 towing eyes, left and right Cgedey Dmvaepfx Albsw * Spray flaps under underrun protection, black with STAS logo * Cylinder tipping angle, standard ±47° * Model tipping cylinder: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 * Standard surface finish for cylinder stages * Hydraulic coupling: rotary coupling * Hydraulic coupling - size 1 * Hydraulic coupling - female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mudguard flaps: 2 * Mudguard flap type: Asphalt * Toolbox: 860x520x500 * Aluminum ladder 3m, right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of chassis * 2 plastic wheel chocks * Retention device chassis/body: rubber poly-pad Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Lower belt profile internal angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall type: combination door * Combination door design: 2/3 - 1/3 split with pivoting upper transverse door rail * Door leaf opens right first * Pivoting transverse door rail * Hinge type: double knuckle * Slide type: rectangular * Slide position: 1 piece, centered * Grain outlet/dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Open door leaves secured by chain * Standard rubber seal on rear wall * Extra aluminum round profile

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.613 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 604 m³, skupna širina: 2.550 mm, Oprema: ABS, Equipment: * Chassis type: moving floor * Kingpin load rating (national) (t): 12 Codpfsy I Hr Asx Albjgw * Fifth wheel height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) moving floor semi-trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10,613 * Chassis neck height (mm): 240 * Overall width (mm): 2550 * Volume (m³): 60.4145 * Overall length (mm): 11,420 * Axles: JOST * Brake version: disc brakes * Brake type: JOST - DCA-T7 (Knorr braking system) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Traction aid activation via push button in truck * Option: 3rd axle with lift axle and Optiturn, activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lowering valve * Lowering of air suspension via Smartboard as well as lift/lower valve * Control console for EBS operation on left, ahead of axles * Standard Smartboard * Central air and electrical console with gantry * Landing gears: aluminium drop leg jacks * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura-Bright * TPMS sensor type: rim-mounted * TPMS sensor manufacturer: ZF * Wheel nut caps: chrome with STAS logo * Lighting type: ECOLED III with STAS logo * Reversing lights: 2 pieces * 2x LED reversing lights at rear, left and right, mounted behind axles * 2x LED reversing lights at front, left and right, mounted near landing gears * 1x inside on the front wall, direction of travel left * Lighting unit protection: one-piece guard plate * LEDs in rear crossbar: 2 x 3-function LEDs * Underrun protection * Mudflap underrun protection, black with STAS logo * Control console position for moving floor: left, behind axles * Hydraulic coupler: rotary coupling * Hydraulic coupler size: 3/4" * Hydraulic coupler gender: female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling size: 1" * Hydraulic return coupling gender: female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling connection position: on front wall * Hydraulic coupling specification: standard version * Hydraulic functions: pressure left, return right (CON) * Toolbox: plastic * Air connection in toolbox * Aluminium ladder, 2.5 m, extendable * Broom and shovel holder * Two plastic wheel chocks * Front wall angle (°): 90 * Rear wall angle (°): 90 * Service door: on left in direction of travel * Side wall profile: 3 mm - 2 mm * Moving floor system make: Cargo Floor * Floor system operation: radio remote control * Moving floor system: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Floor profile type: 11 mm smooth, overlapping with end plate, moving floor aluminium * Oil temperature sensor for moving floor system * Emptying end wall: aluminium with brushes * Emptying end wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall: aluminium * Impact protection rear doors: aluminium dock buffers * Number and position of stanchions: 2 centre stanchions (centre, evenly distributed) and 1 rear stanchion (rear) * Tarpaulin holders, straight version: 4 pieces, right side wall * Catwalk/ladders * Catwalk on front wall * Foldable A-sign

Stanje: novo, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.641 mm, prostornina tovornega prostora: 91 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor (walking floor) * King pin load (National, t): 12 * Axle load (National, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor semi-trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Activation of traction aid via button in truck (installation of button not included) and by pressing brake pedal three times * Option: 3rd axle with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via smartboard as well as lift/lower valve * Pneumatic coupling head: European palm coupling * Control console: EBS control on driver's side, behind axles * Standard smartboard * Air and electrical console centrally mounted with gantry * Landing legs: Weweler * As steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation and 2 speed stages * Position of landing leg crank handle: outside * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Steel * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 LED reversing lights, mounted at rear left and right on the lamp holder * Work lights (operated via switch): 2 LED reversing lights at front left and right, mounted near landing legs * Protection of lighting unit: One-piece mudguard * LEDs in door end cross member: 2 x 3-function LED * Operating underrun protection: Fixed underrun bar * Mud flaps underrun protection: Black with STAS logo * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: Swivel coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling - hose: 3,000 mm * Hydraulic coupling - position: Connection possible at front wall (additional connection possible at landing legs) * Hydraulic positioning: Pressure return, pressure left, return right (CON) * Number of mud flaps on fenders: 2 pieces * Toolbox * Air connection mounted laterally on control panel * Aluminium access ladder 3.80 m - right side * Broom and shovel holder Csdpfx Aoy Dmu Njlbogw * Two plastic wheel chocks * Profile front wall: 3 mm - 2 mm * Profile side wall: 3 mm - 2 mm * Moving floor system: Cargo Floor brand * Floor system operation: Radio remote control * Cargo Floor Control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Front wall inclination (°): 90 * Rear wall inclination (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Residue emptying wall: Aluminium * Storage for residue emptying wall: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: Swing door, 1/2 to 1/2 division, with door end cross member

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, skupna širina: 2.550 mm, skupna višina: 2.165 mm, Leto izdelave: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-chassis * Kingpin load (National): 12 t * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm): 2165 * Internal height rear (mm): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid Cgsdpey Dmvmsfx Albew * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of the air suspension during tipping, can be locked manually via Smartboard or switch on chassis * Pneumatic coupling head: European Palm Coupling * EBS control panel on the left-hand side in the direction of travel, in front of the axles * Standard Smartboard * Air and electric console on the right-hand side in the direction of travel * Landing gears: Weweler as steel gear landing gears, type Weweler, with compensation feet, single-sided operation and 2 speed settings * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: regional distance * TPMS sensor type: rim-mounted sensor * TPMS sensor * Wheel nut caps: Chrome with STAS logo * Work light position (operated by switch): 2 LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp bracket * Work light position (operated by switch): 2 LED reversing lights at the front, left and right in the direction of travel, mounted in the area of the landing gears * LEDs in rear cross member: 2 x 3-function LED * Manual underrun protection operation * Towing eye: 2 pieces, left and right * Rear underrun splash guards: Black with STAS logo * Cylinder tipping angle: Normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white line * Number of mudflap pieces on mudguard: 2 * Mudflap type (on mudguard): asphalt * Toolbox: 860x520x500 * Aluminium access ladder 3 m - right side in direction of travel * Holder for broom and shovel * Ferry rings * 2 lashing eyes at rear of chassis * 2 plastic wheel chocks * Body retention device: chassis - body rubber buffer Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm aluminium * Sidewall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads attached below floor cross members * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with pivoting door end cross member * Right door leaf opens first * Door end cross member: pivoting design * Hinge type: double door hinge * Sliding shutter: rectangular design * Position of shutter: 1 piece, centered * Grain outlet / dust sack: 1 grain hopper incl. dust sack * Smooth surface on rear wall * Open door leafs are fixed using a chain * ...

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2015, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, medosna razdalja: 9.060 mm, Leto izdelave: 2015, Oprema: ABS, = Dodatne možnosti in oprema = - Elektronski zavorni sistem (EBS) - Zadnja vrata - Zračno vzmetenje = Dodatne informacije = Konfiguracija osi Velikost pnevmatik: 385/65R22.5 Znamka osi: VALX Cgjdpezhbgxefx Albew Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Alu platišča; dvižna os; maks. osna obremenitev: 9.000 kg; profil pnevmatike levo: 70 %; profil pnevmatike desno: 70 % Zadnja os 2: Alu platišča; maks. osna obremenitev: 9.000 kg; profil pnevmatike levo: 60 %; profil pnevmatike desno: 60 % Zadnja os 3: Alu platišča; maks. osna obremenitev: 9.000 kg; profil pnevmatike levo: 60 %; profil pnevmatike desno: 60 % Teže Lastna teža: 8.330 kg Nosilnost: 36.670 kg gVW: 45.000 kg Identifikacija Registrska oznaka: ON-94-VP Dodatne informacije Za več informacij se obrnite na Boba Beukersa.

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 03/2020, vzmetenje: zrak, velikost pnevmatike: 445/45R19.5, Leto izdelave: 2020, Oprema: ABS, = Dodatne možnosti in oprema = - Elektronski zavorni sistem (EBS) - Zadnja vrata - Zračno vzmetenje = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 445/45R19.5 Znamka osi: BPW Zavore: Kolutne zavore Vzmetenje: Zračno vzmetenje Zadnja os 1: LM platišča; dvižna os; Največja obremenitev osi: 9000 kg; Profil pnevmatik levo: 60%; Profil pnevmatik desno: 60% Cjdpfxszg D T So Albsgw Zadnja os 2: LM platišča; Največja obremenitev osi: 9000 kg; Profil pnevmatik levo: 80%; Profil pnevmatik desno: 80% Zadnja os 3: LM platišča; Največja obremenitev osi: 9000 kg; Profil pnevmatik levo: 80%; Profil pnevmatik desno: 80% Teže Lastna teža: 7.800 kg Vzdrževanje APK (tehnični glavni pregled): veljaven do 06.2027 Dodatne informacije Za dodatne informacije se obrnite na Bob Beukers.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 05/2012, prostornina tovornega prostora: 50 m³, skupna dolžina: 11.490 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 8.710 mm, barva: zelen, Leto izdelave: 2012, Oprema: ABS, = Additional Options and Accessories = - Alcoa Dura-Bright wheels - EBS (Electronic Braking System) - Rear doors - Lift axle - LED lights - LED work lights - Alloy rims - Air suspension - Sliding tarpaulin cover Cedpjyxdhisfx Albogw - SAF axles - Disc brakes = Notes = Stas S300CX Year of manufacture: 2012 50m³ BPW axles, disc brakes Tailgate/door combination Aluminum rims Tarpaulin cover ABS/EBS Roadworthiness test (APK) valid until 05/2025 = Additional Information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Max. axle load: 9,000 kg; Left tire tread: 60%; Right tire tread: 60% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Left tire tread: 60%; Right tire tread: 50% Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Left tire tread: 60%; Right tire tread: 50% Weights Unladen weight: 6,570 kg Payload: 32,430 kg Gross vehicle weight (GVW): 39,000 kg Functional Tipper: Rear Condition Technical condition: very good Visual condition: very good Identification Registration number: OL-56-RN = Company Information = Interested in financing this vehicle? Not a problem. We can quickly arrange a favorable finance lease contract for you with terms of 12, 24, 36, 48, or 60 months. All photos and further information can be found at or contact us directly.

Stanje: rabljeno, lastna masa: 7.950 kg, največja dovoljena obremenitev: 31.050 kg, skupna masa: 39.000 kg, prva registracija: 10/2024, prostornina tovornega prostora: 93 m³, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, drsna vrata, elektronski program stabilnosti (ESP), Knapen Schubbodenauflieger 92 m³ Volumen * Leergewicht ca. 7.950 kg * Abmessungen innen (L x B x H): 13,53 x 2,48 x 2,69/2,79 m * Hecktüren mit Edelstahlverschlussstangen und Sicherung * Mitlaufende Trennwand * ABS/EBS * 1 x Liftachse * Alcoa-Aluminiumfelgen * 10 mm Cargofloor * 1-Zoll-Adpro-Anschluss * LED-Lichtanlage * Zusätzliche LED-Rückfahrscheinwerfer * Knapen-Achsen * Bereifung: 385/65R22,5 Sehr guter Zustand! Deutsches Fahrzeug! Auch zur Vermietung! Knapen Walking Floor Trailer, volume 92 m³ * Empty weight approx. 7,950 kg * Internal dimensions (L x W x H): 13.53 x 2.48 x 2.69/2.79 m * Rear doors with stainless steel locking rods and safety latch * Mobile partition wall * ABS/EBS * 1 x lift axle * Alcoa aluminum rims * 10 mm cargo floor * 1-inch Adpro connection * LED lighting system * Additional LED reversing lights * Knapen axles * Tires: 385/65R22.5 Very good condition! German vehicle! Available for rental! Remorque à fond mouvant Knapen, volume 92 m³ * Poids à vide env. 7 950 kg * Dimensions intérieures (L x l x H) : 13,53 x 2,48 x 2,69/2,79 m * Portes arrière avec barres de verrouillage en inox et sécurité * Cloison mobile * ABS/EBS * 1 x essieu relevable * Jantes aluminium Alcoa * Plancher mobile 10 mm * Raccord 1 pouce Adpro * Système d'éclairage LED * Feux de recul LED supplémentaires Cgsdpfx Alswrfaajbow * Essieux Knapen * Pneus : 385/65R22,5 Très bon état ! Véhicule allemand ! Disponible à la location !

Stanje: rabljeno, prevoženi kilometri: 287.820 km, moč: 190 kW (258,33 KM), prva registracija: 01/1973, vrsta goriva: dizel, skupna masa: 22.000 kg, konfiguracija osi: 3 osi, barva: zelen, vrsta prenosa: mehanski, Scania LS 110 Super Three-Way Tipper – Fully Restored – Collectors’ Item For sale is a Scania LS 110 Super three-way tipper in fully restored condition. The engine runs smoothly and powerfully, and the transmission shifts cleanly. The cab, chassis, body, and technical components are all in excellent visual and mechanical condition. Perfect for collectors, classic vehicle events, or as a showpiece. - Three-way tipper - Snow plough mounting - Leaf/leaf suspension - Roof rack - Rotating beacons Cgjdpjyg Utdsfx Albjw - Tire size front axle: 11.00 - 20 NB 60 - Tire size rear axle: 11.00 - NB 60 - Technical gross weight: 22,000 kg - Curb weight: 9,400 kg Vehicle number: 11617 Errors and prior sale excepted. Advertising and various decals have been digitally removed. We are happy to assist you with all paperwork required for the purchase of a vehicle. Simply let us know your wishes and suggestions and we will take care of the rest. Among other services, we can offer you the following for an additional fee: - Trade-in of your old vehicle - TÜV/roadworthiness inspections - Complete export handling - Financing arrangements - Application for export license plates - Vehicle transfer - Vehicle registration - Recovery and vehicle transport YOUR VTS TEAM

Stanje: rabljeno, največja dovoljena obremenitev: 30.060 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 9.665 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 9.665 mm, prostornina tovornega prostora: 51 m³, Leto izdelave: 2024, Oprema: ABS, Last king pin National 12t Axle load National 8t Axle spacing 1310-1310 mm Saddle height 1150 mm Chassis width 1400 mm Internal height front 2165 mm Internal height rear 2165 mm Overall width 2550 mm Wheelbase 6800 mm Overall length 10656 mm Chassis material Aluminium Tyres 385/65R22.5 Loading length 9665 mm Axles SAF Brake type SAF - SBS 2220 Offset (ET) 120 Option 1st axle With lift axle and starting aid Activation of starting aid Via push button in the truck (mounting of button not included in scope of supply) and by operating the brake pedal three times Brake pad wear indicator Not connected Tyre inflation system (Tire Pilot) Without Tyre pressure monitoring Wabco Trailerpulse Air suspension ECAS with lift and lower valve Lowering of air suspension Automatic lowering of air suspension during tipping, can be manually locked via smartboard and a switch on the chassis Pneumatic coupling head European palm coupling Wheel nut caps Chrome with STAS logo Landing legs Aluminium drop support legs mounted at the front of the chassis, operated individually from both sides, support capacity 20t / P Underrun protection operation Manual Tow eye Once, in driving direction Mud flaps underrun protection Black with STAS logo Cover underrun protection Handle underrun protection With Control console EBS operation In direction of travel, in front of axles Tool box position In direction of travel to the left, in front of axles, plastic Tool box dimension - Left in front of axles 860x520x500 Mudguard type Domar STAS with white line Number of mud flaps on mudguard 2x Mud flap type mudguard Clear Pass Lighting manufacturer Aspöck Lighting type ECOLED II Work lights (operated by switch) With Position work lights (operated by switch) 2x LED reversing lights in front, to the left and right in direction of travel, in the area of the landing legs Tipper cylinder brand Hyva Tipper cylinder type Hydraulic cylinder with large casing Tipper cylinder model Hyva - FC 169 Csdpfx Aeuar Amslbsgw Tipper cylinder stroke 7130 Tipper cylinder max. pressure 250 Surface treatment of cylinder stages Standard surface treatment Hydraulic coupling Rotating coupling Hydraulic coupling - size 1 Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminium leaning ladder 3 m Leaning ladder mounting for rear access With hooks for hanging Position broom and shovel holder 3 holders each, on chassis to the left in direction of travel Loading pressure gauge Ø 100 mm - mounted at the front on the chassis With two plastic wheel chocks including mount Body support device Chassis - Body Rubber stops Air and electrical console Centrally in direction of travel with gallows Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type Combination door Internal lower belt profile inclination (°) 90 Floor 8 mm ALU - 110 Brinell Position rubber pads below floor crossmembers Front wall 4 mm (Alu) Profile side wall 3 mm - 2 mm smooth finish inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall Alu Combination door type 1/2 - 1/2 with swivelling upper crossbar Door leaf opening Right door leaf opens first (STAS manufacturer choice) Upper crossbar Swivelling version Hinge type With double door hinge (double-joint hinge) Slider Rectangular design, standard Slider position 2 pieces, with control handle, 1 each to left and right in direction of travel Securing of open door leaves By chain Rear wall seal With standard rubber seal

Stanje: novo, lastna masa: 6.550 kg, največja dovoljena obremenitev: 29.450 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.613 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.300 mm, skupna dolžina: 25.500 mm, skupna širina: 39.960 mm, skupna višina: 140.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, medosna razdalja: 6.250 mm, Leto izdelave: 2025, velikost sprednje pnevmatike: 385/65 R 22,5, velikost zadnje pnevmatike: 385/65 R 22,5, emisijski razred: noben, Axle manufacturer SAF, aluminium chassis, colour grey, suspension air-lift, raising and lowering, lift axle 1st and 3rd axle, brakes disc brakes, fixed lateral underrun protection, toolbox, 2x LED reversing lights, 4x LED side reversing lights (2x on the support winch and 2x behind the axle assembly), 1x LED spotlight in the cargo area, broom and shovel holder on the left side underrun protection in the direction of travel, Cargofloor control type CF 500 SL-C - E"-CONTROL 6 mm with additional plastic guides under the floor profiles, swing doors (1/2 - 1/2 with door end crossbeam), radio remote control, rear door impact protection - aluminium bumpers over the entire width of the rear wall, stanchions and tarpaulin, maintenance hatch front left, working platform with steps, rolling tarpaulin (PVC tarpaulin, Panama quality, 900g/m²), load securing certificate DIN EN 12642 Code XL, production 5/2025, grain hopper / sluice with central outlet at the rear and dust bag, immediately available. Cgodpfx Aexac Dpolbjw

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 56 m³, Oprema: ABS, Chassis – Lightweight Version Made from aluminium (15-6-12) Two fully automated welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Axles and Suspension - 430 mm disc brakes - Jost (ex Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, air bellows centrally positioned on the chassis longitudinal member - 1st axle liftable with start-up aid and manual forced lowering - Smart Board Info Center - Raise/lower valve - BVA brake wear indicator Tyres and Wheels - 6 wheels with 385/65 R22.5 tyres from selected manufacturers, steel rims 11.75 x 22.5 ET 120 Landing Gear - Mechanical version with single-sided operation, 2-speed gearbox, swiveling foot for air suspension Brake System - According to E.G. standard, two-line Wabco system, spring-loaded parking brake on two axles, and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Info Center, aluminium air reservoir system Electrical System - According to German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck Ecopoint 2 lights, 24V system with 2 x 7- and 1 x 5-pin sockets, side marker lights, 2 separate LED reversing lights at the rear, 1 LED interior light Tipping Body / Body Construction (fully welded interior) - Aluminium tipper body - Sidewalls: 30 mm thick plank profiles (2–3 mm), welded 600 mm wide - Floor: 8 mm high-wear resistant alloy (5383H34/HB 110) - Front wall: 4 mm reinforced, straight version - Rear wall: Universal door, straight version with 2 wing doors in 2/3-1/3 division with one grain chute, or optional in 1/2-1/2 version with one grain chute per door - Aluminium round profile sealing at rear doors (side and bottom) - Rear doors partially smooth aluminium-plated - Universal door operation: pneumatically automatic with separate lever lock - Aluminium swing-out rear canopy - 2 hold-down devices with rubber buffers on tipping body frame at the front wall Hydraulic System – Tipping Cylinder with Large Housing - Hydraulic cylinder mounted on the front wall, max. working pressure 150 bar, manufacturer Edbro - Approx. 2.5 m hydraulic hose and 1" loose half coupling - Tipping angle approx. 48° Accessories - 6 Parlok mudguards - Complete splash apron covering the entire vehicle width mounted to the underrun protection - Aluminium spare wheel holder - Right-side foldable side underrun guard - Large toolbox type 860 - Approx. 3 m aluminium ladder - 3 aluminium pivoting bows approx. 150 mm raised in the middle - Additional centrally mounted bow bracket for a total of 2 bows to increase loading width - Rolling tarpaulin with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with roll tarp system, perimeter rubber cord at the rear closure of the tarp with two hooks to fix at rear pivoting bow - Walkway on chassis frame painted in chassis color - Tarpaulin quick release lock - Rear tarp closure with welded-in rubber seal for water ingress protection - Robust, foldable underrun protection with two towing eyes left and right incl. pin - 2 "Clear-Pass" splash guards on the fenders (EG standard) - Aluminium grain funnel with sack, mounted on the side of the frame - Holder for shovel, broom, and scraper above the axles +€590 delivery charge Available in 50 m³ – 56 m³ Loading compartment length: 9,700 mm and 10,500 mm Cgodpfjfi Nmujx Albow * Price varies according to equipment configuration