Polpriklopnik kiper

SCHMITZ CARGOBULL SKI24 7.2 SL Alu 27,2 cbm Mietkauf 610 EUR

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Chodpfxjfakkcj Akcsa Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902037031, lastna masa: 4.795 kg, največja dovoljena obremenitev: 30.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.040 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: siv, These images are archive photos! The vehicle may still be in use! Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin, Curved front closure, patented 24-ton, 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, with thrust compensation Wheel chocks with holders Foldable underrun protection Half-shell fenders Integrated mudguard bracket, stone-repellent finish With anti-spray mud flaps only on the last axle Tarpaulin rod with bracket Tow hook at rear (not included on Revolution model) Axles & Suspension SAF disc brake axles with 430 mm disc diameter Chsdpfx Aey Rrplokcoa "Laser-measured axles/chassis" reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle is an automatic lift axle, including forced lowering and traction aid, operated by "brake 3x" function (traction aid works up to axle overload of 30% and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Brake system 2-line compressed air braking system Color-coded piping for easier maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting hose 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles equipped to ensure proper ABS function! With raise/lower valve Vehicle stability system Automatic tipping lowering with shut-off valve "TPMS" tire pressure monitoring system – display via towing vehicle, through EBS, not installed in truck (prerequisite: required installation in truck; only monitors base tyres) Wheels & Tires 385/65 R22.5" Steel rims Electrics 24 Volts, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED (Note: for certain towing vehicles, error messages may occur despite fully functioning system) Side yellow LED lighting linked to turn signal ("blinking side marker lights") 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Integrated additional LED work light at the rear, switched with reverse light Hydraulics Low-pressure cylinder, max. 170 bar Operation hydraulically via vehicle PTO Body Aluminium box body made of high-grade, abrasion-resistant material. Inclined front wall, 5 mm thick, with external cylinder mounting. Side walls constructed from 30 mm hollow section profiles, neatly welded, with spill-repellent top rail profile. Interior with access steps at front wall (not with Cramaro system). External shovel and broom holders at front wall Greenline – conical, aerodynamic body form "Membrane" tailgate Tailgate as pendulum flap with double-joint hinges, externally mounted, dual hook locking Tailgate with rubber seal Continuous 6 mm thick floor Standing platform with access steps, connector plate for air/electricity/brake with large working space for optimal operability Roll tarpaulin can be stowed on right side, with central locking on the left Operating notes For transport involving salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against material corrosion and rusting.