Müller-Mitteltal 5 Achs Tieflader, Nachlauflenkachse, Ma Liftbar nakup rabljenega (42.357)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Kaufungen
695 km
Polpriklopnik z nizko nakladalno ploščadjo
MÜLLER-MITTELTALTS2 KOMPAKT Tieflader 2 Achse Hydr. Rampen
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 23.900 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, Leto izdelave: 2007, Interna št. vozila: G400178
Nemško vozilo
Takoj na voljo na našem dvorišču v Kaufungen - Kassel, Nemčija
Več INFO pri:
Lsdezahg Depfx Aicoac
* Luis Lucena (nemško, angleško, špansko, francosko)
* Viktoria Sologubova (poljsko, rusko, ukrajinsko, angleško)
Lastna masa: 7.100 kg
Skupna dolžina: 10.800 mm
Najv. dovoljena masa: 31.000 kg
Pridržujemo si pravico do napak
Z veseljem sprejmemo vaše rabljeno vozilo v račun.
Možnost financiranja neposredno pri nas.
GOLEC NUTZFAHRZEUGE GMBH
Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.
----.
Mali oglas
Bobenheim - Roxheim
623 km
Polpriklopnik z nizko nakladalno ploščadjo
MÜLLER-MITTELTALTieflader TS3-RM ML30,0 mit Radmulden Lenkachse
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 38.230 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Müller-Mitteltal nizkopodna prikolica z vdolbinami za kolesa TS 3 RM ML 30,0, 2 višini nakladanja in rampe
* Povečanje vertikalne obremenitve sedla iz 12 t na 18 t vklj. Montiran sedelni zatič v: drugi poziciji sedelnega zatiča 2", sedelni zatič do vključno krivljenja 2.750 mm. Zadnji polmer zasuka ca. 2.400 mm v svetli odprtini (priporočamo prosti prostor min. 150 mm). Sprednji polmer zasuka 1.480 mm oz. 1.570 mm z rezervnim kolesom. Opomba: Dovolj prostora do vlečnega vozila mora zagotoviti stranka.
* Izvlečni deli za vdolbine za kolesa spredaj in zadaj spodaj (205 mm globoko). 6 kos desk za vdolbine za kolesa z nosilcem kot ležišče v skladu s kodo 09.112 ALU-tlačni zračni rezervoar namesto jeklenega
* Smartboard upravljalna omarica kot infotool nameščena na prikolici z tlačnimi senzorji za prikaz skupne obremenjenosti osi. Prikaz možen na upravljalni omarici ali v tovornjaku preko EBS-zračnega vzmetenja (odvisno od proizvajalca tovornjaka)
* ?SP-kombi paket: Orodjarna z 45° vogali iz pocinkanega jekla, dodatno prašno lakirana v RAL 9006 bela aluminij, na sedlarski platformi B=2.480 x V=500 mm z zgornjim preklopnim pokrovom, stranskimi vrati in poševno. ALU stranske stene zložljive na sedlarsko platformo (500 mm visoko), ALU zadnja stena vstavna (150 mm visoko), notranje in zunanje ALU stranice lakirane v RAL 9006 bela aluminij. Vklj. zložljivi & snemljivi zadnji stebri, pocinkani (brez zaključnega premaza). Vključuje vijačeno sprednjo konstrukcijo. Dolžina sprednjega okvirja do krivljenja 3.935 mm Sprednji polmer zasuka, brez rezervnega kolesa z dimenzijo krivljenja 2.450 mm oz. 2.750 mm ca. 1.750 oz. ca. 1.480 mm
* 2 kosa ležišč za fiksiranje kontejnerjev, vgrajeni v sprednji okvir
Lajdpfx Aisy R Ipuecoc
* 3 ležišča pod sedlarsko platformo za shranjevanje izbirnih ALU ramp ali lesenih desk za prekrivanje vdolbin za kolesa
* Zložljivo/izvlečno konzolo (pocinkana) in lesene deske za širitev vklj. (ne na zadnji poševnini), nosilec desk na sedlarski platformi (največja širina tovora največ 2.500 mm)
* Druga LED pozicijska luč v opozorilnem paketu spredaj in zadaj (dvojna osvetlitev), le v povezavi z opozorilnim paketom
* 2 LED vzvratni žarometi na zadnji strani prikolice, prižgana v vzvratni prestavi (primerno za 12 V in 24 V), največ 2 dodatna kosa dovoljena
* 7-polna vtičnica na zadnji strani, vezana za razsvetljavo za prekomerno dolžino z zadnjo lučjo (58 R) in maso
* Gumijasta prevleka na nakladalni rampi levo in desno (ca. 860 mm dolžine) 190 07644 gumijasti trakovi, na notranji deski enodelnih ramp
* Popolnoma avtomatski centralni sistem mazanja s črpalko (24V), rezervoarjem za mast ter integriranim upravljanjem prikolice, brez priklopa ramp (pri krmiljenju: vključno s priklopom razdelilnika na sedlarsko platformo). Opomba: Možno izključno za vlečna vozila z 24V razsvetljavo!
Vmesna prodaja in napake pridržane!
Prodaja izključno po naših Splošnih pogojih poslovanja.
Pomembno obvestilo – Pomembna informacija: Kljub natančnemu preverjanju vseh podrobnosti v naši ponudbi se lahko pojavijo napake, ki so posledica prenosa med različnimi platformami. Zato opozarjamo, da so vse informacije brez garancije in ne predstavljajo pravne zahteve.
Pravno: Ta prodajni oglas ne predstavlja ponudbe v smislu §145 BGB, ampak informacijo za pripravo pogodbe. Tukaj navedeni podatki so brez garancije in ne predstavljajo zagotovljenih lastnosti.
Mali oglas
Legden
847 km
Odprta prikolica
MÜLLER-MITTELTALEAL-TA 13,5 Tandem Anhänger
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 10.950 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 04/2007, naslednji pregled (TÜV): 04/2027, skupna širina: 2.550 mm, skupna višina: 1.500 mm, Oprema: ABS, * zračno vzmetenje
----* dimenzija pnevmatik: 285/70R22,5
* tehnična skupna masa: 13.500 kg
* lastna masa: 2.550 kg
* skupna dolžina: 6.600 mm
* SP zapade: 10.2026
----Številka vozila: 12150---Pridržujemo si pravico do napak in vmesne prodaje---Oglasi in različni napisi so bili digitalno odstranjeni.---Z veseljem vam svetujemo in pomagamo pri vseh formalnostih, ki nastanejo pri nakupu vozila. Sporočite nam vaše želje in predloge, mi pa bomo poskrbeli za ostalo. Poleg tega vam lahko za doplačilo ponudimo naslednje storitve:---Odkup vašega starega vozilaTÜV/SP pregledPopolna izvozna obravnavaPosredovanje financiranjaPridobitev izvoznih registrskih tablicPrevoz vozilRegistracija vozilReševanje in transport vozil---Vaša VTS ekipa
Laodpfxozb Avij Aicsc


Več kot 140.000 povpraševanj po nakupu mesečno
Izvedite več zdaj
+49 201 858 95 507
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL2achs, 21to,Agrar, Stahl,3 Seitenkip. -Bordmatik
Pokliči
Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0:
----Axles:
* Gigant axles
* Start-up aid for maneuvering purposes on the 1st axle (operated via EBS)
* 1st axle as lift axle (fully automatic)
* Forced lowering and raising of the lift axle by an additional switch in the tractor unit
* Automatic lowering of the air suspension during tipping operation (can be deactivated via control unit in the driver's cab)
----Brakes:
* EBS (electronic braking system with RSS)
* Emergency release device for spring brake cylinder
* Drum brakes
----Tyres:
* 600/55 R 22.5
----Suspension:
* Air suspension with level control during tipping operation
----Electrics / Lighting:
* 13-pin 12V power connector
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* LED tail lights 12 / 24 V with galvanized protective housing
----Drawbar / Flanged Towing Eye:
* Drawbar with adjustable K80 ball hitch
----Coupling Height:
* Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines
----General attachments:
* Support winch at the front
* Bolted steel underride guard
* Plastic quarter mudguards in front of the first and behind the last axle
* Removable protective grille for rear lights (not permitted under StVZO regulations and must be removed before driving on public roads)
----Chassis:
* Chassis made of fine-grained steel
----Tipper Body:
* 3-way tipper body made of steel (fixed front wall, continuous side walls - without center pillar -, right side wall swinging via central locking and foldable with drop side spring assist)
* Left side wall foldable with drop side hydromatics
* Rear wall swinging with automatic hook locking
* 5 mm steel floor made of HARDOX-450 steel or equivalent
----Load securing:
* On each side 4 x 3 t lashing rings recessed in the outer frame, UVV-compliant
Laedpfey Tr Hiex Aicjc
----Paintwork:
* Axles, air tank, support winch, flanged towing eye painted in a black tone
* Tipper body painted in a customer-specified RAL color (no special or metallic paint), can be changed up to approx. 6 weeks before completion
* Chassis, protective grille for rear lights, hot-dip galvanized
----Info:
* Sample images
----Delivery time:
* The vehicle is still under construction and, barring any delays, will be completed in calendar week 44 / 2026
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL2achs, 21to,Agrar, Stahl,3 Seitenkip. -Bordmatik
Pokliči
Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0:
----Axles:
Lsdoy Tr Hcspfx Aicjac
* Gigant axles
* Start assist system for maneuvering on the 1st axle (controlled via EBS)
* 1st axle as lift axle (fully automatic)
* Forced lowering and raising of the lift axle via an additional switch in the tractor
* Automatic lowering of the air suspension when tipping (can be deactivated via control element in cab)
----Brakes:
* EBS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Tyres:
* 600/55 R 22.5
----Suspension:
* Air suspension with level control during tipping
----Electrics / Lighting:
* 13-pin 12V power connector
* EBS multi-voltage system for tractors with 12V & 24V electrics
* LED tail lights 12/24 V with galvanized protection box
----Drawbar / Flange towing eye:
* Drawbar with K80 ball coupling, adjustable mm
----Coupling height:
* Coupling height approx. 440 - 550 mm when loaded with raised tower for connecting lines
----General attachments:
* Support winch in front
* Bolted steel underride guard
* Plastic quarter mudguards in front of the first and behind the last axle
* Removable tail light guard (not permitted under StVZO, must be removed before driving on public roads)
----Chassis:
* Chassis made of fine-grain steel
----Tipping body:
* 3-way steel tipper body (fixed front wall, continuous side walls without center stanchions, right side wall swinging via central locking and foldable with side wall spring-assisted lift, left side wall foldable with hydraulic side wall system)
* Tailgate swinging with automatic hook locking
* 5 mm steel floor made from HARDOX-450 steel or equivalent
----Load securing:
* Each side with 4 x 3 ton UVV lashing rings recessed in outer frame
----Painting:
* Axles, air tanks, support winch, flange towing eye painted in black
* Tipper body painted in a RAL color of your choice (no special or metallic colors, changeable up to approx. 6 weeks before completion)
* Chassis, tail light guards hot-dip galvanized
----Information:
* Sample images
----Delivery time:
* Vehicle is still under construction and, assuming uninterrupted and steady production, will be completed in week 44 / 2026
Mali oglas
Schwebheim
554 km
Tristrani nagibni priklopnik
Müller MitteltalTA-2 14,4 t Tandemkipper- Tieflader Breitbereifung NEUWERTIG
Pokliči
Stanje: rabljeno, lastna masa: 3.680 kg, največja dovoljena obremenitev: 10.720 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2021, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19,5 156J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 156J, velikost zadnje pnevmatike: 385/55R19,5 156J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, KOT NOVO, široke pnevmatike, kiper ploščad CINKANA, 12 pritrdilnih obročev, stranske stene 600 mm, doplačilo za rampe 1.000 €, -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, vzorčne slike --, Več podatkov na zahtevo!
Ljdszd Dtaopfx Aicsac
Mali oglas
Schwebheim
554 km
Tristrani nagibni priklopnik
Müller MitteltalKA-TA-RT 18,0 18 t Tandemkipper- Tieflader
Pokliči
Stanje: rabljeno, lastna masa: 4.190 kg, največja dovoljena obremenitev: 13.810 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2016, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R22,5 160J, velikost zadnje pnevmatike: 385/55R22,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne zanke, aluminijaste stranske stranice 800 mm, doplačilo za rampe 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in razlik v podatkih, vzorčne slike --, Več podatkov na: !, Več podrobnosti: !
Laodpfx Aijzd Dudjcec
Mali oglas
Furth im Wald
387 km
Odvozna prikolica
MÜLLER-MITTELTALRA18 Abrollanhänger 7m BPW Trommel TÜV 5/2025
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 14.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2010, naslednji pregled (TÜV): 05/2025, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, Leto izdelave: 2010, Oprema: ABS, MÜLLER MITTELTAL RA18 Trailer for Swap Containers with External Rollers 5,500 mm – 7,000 mm,
German trailer, second owner
Technical Data
Suitable for containers with external rollers, internal length 5,500–7,000 mm, for rear loading.
Dimensions:
- Gross weight: 18,000 kg
- Unladen weight: approx. 3,100 kg
- Payload: approx. 14,900 kg
- Overall length: approx. 9,400 mm
- Overall width: 2,550 mm
- Tyres: 385/55R22.5, approx. 40–70% tread
Features:
- ABS/EBS connection according to ISO 7638 (5- or 7-pin)
- Chassis main frame with raised outer rails for container guidance, hot-dip galvanized
- Container locking:
The roll-off container is secured at 4 points by 2 pneumatic clamping units. After sliding on the container, the 4 securing claws are closed by activating a valve, clamping the container to the chassis frame. To the front, the container is additionally secured by 2 insertable lock parts (with holders), which can be positioned at various points along the guide rails.
- 2x 9t BPW 420 mm drum brake axles with air suspension
- Air suspension with lowering function
- Frame: welded steel construction
- Brake system: two-line EBS-compliant (EU standard)
- DUOMATIC coupling head
- Spring-loaded parking brake
- Electrics: 24 volts
- Multi-chamber rear lights
- 15-pin plug with connecting cable
- Lighting according to EU regulations
- Rims: factory silver
- Underrun protection: aluminum profiles
- Wheel chocks with holders
Lasdevg T Nyopfx Aicoc
- 1/2 shell plastic mudguards
- Toolbox (approx. 800x300x500 mm)
Condition commensurate with age and mileage!
Delivery available at extra cost
All information subject to change!
Sale to businesses or for export only!
NOTE: PRICE IS NET PLUS VAT
German, English: JOSEF
WhatsApp:
We speak: German, Czech, Polish, Romanian, Russian, English
Mali oglas
Riederich
509 km
Hladilnik prikolica
MÜLLER-MITTELTAL2-Achs Tandemkühlanhänger 7 m LBW*THERMOKING
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 4.960 kg, skupna masa: 10.500 kg, prva registracija: 04/1993, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 6.260 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.430 mm, prostornina tovornega prostora: 37 m³, Oprema: ABS, dvižna zadnja plošča, 2-axle tandem refrigerated trailer, 7 m, with 1 ton tail lift.
* THERMOKING LND-II MAX (diesel engine) and stand-by cooling, 380 V ELECTRIC
* Vehicle number for customer inquiries: 4593
* Tail lift
* Air suspension
* EBS (Electronic Braking System)
* Anti-lock braking system (ABS)
No liability for printing or typographical errors.
Sale exclusively to commercial customers.
Subject to prior sale and errors. Changes, prior sale, and errors are expressly reserved. The description serves solely for the identification of the vehicle and does not constitute a warranty in the legal sense of the purchase contract. The purchase contract description is binding.
* TOP SERVICE & QUALITY
* We are happy to provide you with a leasing, financing, or hire-purchase offer
Guarantee insurance available upon request from the insurer
* TÜV inspection / UVV LBW (tail lift safety test) / tachograph inspection and OBU (On-board Unit) installation can be arranged by our local partners
* Export license plates for 30 days available
All export documents can be provided, but must be requested individually
* Toll collection for Toll Collect can be arranged in-house
* Free transfer from Stuttgart airport or Metzingen (Württ) railway station
* ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT.
* FOR ENGLISH * Andreas Pittas * Thomas Pittas
* Alexander Pittas * Robin Pittas
WHATSAPP number * *
---- Visit us on our website at
Lodpeykxflofx Aicjac
* Over 200 vehicles always in stock
Mali oglas
Jestetten
515 km
Prikolica z nizko platformo
Müller-MitteltalT40 Tieflader / Swiss-Vehicle
Pokliči
Stanje: rabljeno, lastna masa: 9.300 kg, največja dovoljena obremenitev: 14.700 kg, prva registracija: 02/2001, naslednji pregled (TÜV): 10/2024, skupna širina: 25.500 mm, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17.5 / 10mm, velikost sprednje pnevmatike: 235 / 75 R 17.5 / 10mm, obratovalna teža: 24.000 kg,
Mali oglas
Wiedemar
626 km
Drugo
Müller-MitteltalTandem-Tieflader Anhänger ETS-TA-B 11,9
Pokliči
Stanje: rabljeno, prva registracija: 01/2023, voznikova kabina: drugo, vrsta prenosa: drugo, Leto izdelave: 2023, Ostalo:
* Možen je odkup in zamenjava vozil ter strojev.
* Prodajna cena ne vključuje prevoza in prenosa.
* Brez odgovornosti za tiskarske in pisne napake.
* Pridržujemo si pravico do napak, sprememb in medčasne prodaje.
Ledjzcfz Dspfx Aicjac
* Ponudba ni zavezujoča.
* Fotografije so lahko zgolj simbolične. Cena velja za trenutno stanje.
* Vse navedbe brez garancije.
Mali oglas
Triptis
562 km
Nizki nakladalnik
Müller-Mitteltal4-Achs Tieflade-Anhänger T40
Pokliči
Stanje: rabljeno, številka stroja/vozila: 39500, lastna masa: 8.250 kg, največja dovoljena obremenitev: 31.750 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/1995, velikost pnevmatike: 235/75 r17,5 zwilling, barva: oranžna, Further information
Laodpfji Rixgsx Aicoc
Main and outer frame made of high-strength double-T sections, grade ST 52.3, quadruple longitudinal profiling, with high-webbed front and rear cross-members as well as transverse braces; frame behind the bogie passage features a gently sloping stepped offset and rear loading bevel, 0.8 m long; lowest possible floor height achieved by recessed wheel wells above the rear wheels; leading edges of the bogie platform beveled at 45 degrees. Two recessed UVV lashing rings each on the bogie platform and loading bevel for attaching securing devices. Rear end fitted with wide supports for a ramp shaft with six-fold bearings. Lateral side protection fitted with an EC-compliant guard rail, wheel chocks with clamp lock.
Low-maintenance inclined roller bearing axles with automatic linkage adjusters, two-line pneumatic braking system in accordance with EC regulations, and parking brake.
Bogie and drawbar: Constructed from double-T sections in welded design with ball-bearing turntable; standard drawbar length 1,500 mm, with 8 eyelets (50 mm diameter each), drawbar support with threaded spindle as height adjustment device. Vehicle is not fitted with axle compensation!
24 volts, 2 exchange-proof 7-pin connection cables, large rectangular four-chamber lights including rear fog and reversing lights, front distribution box, rear outline marker lights, side marker reflectors, and holder for single-line license plate.
Undercarriage made of 40 mm thick, pressure-impregnated pine. Low-loader platform and loading bevel with cross-laid top flooring, 30 mm thick, running lengthwise. Total floor thickness 70 mm. Bogie platform with longitudinal single-layer flooring and recessed open tool box, size L 700 x W 800 x H 180 mm.
Ramps: Welded construction with trough plate, transverse braces, longitudinally laid wooden overlay, 50 mm thick; ramp tips reinforced; ramp holding rods with turnbuckle and safety catch; ramps laterally adjustable by 470 mm each, with perforated rail and sliding tube; ramp shaft made of bright steel, articulated spring lifters with external and internal springs for easy one-person operation, with automatic ground supports.
Shot-blasted with steel granulate, zinc phosphate-primed, painted in a single acrylic RAL color of choice; wheels silver. Available in traffic, light, and metallic colors as well as two-tone paint finishes; wood surface is stained.
Mali oglas
Empfingen
535 km
Gospodarsko vozilo
Müller-Mitteltal3 Achs Anh für Container Frontbeladung TÜV03 27
Pokliči
Stanje: rabljeno, prva registracija: 10/2014, skupna masa: 27.000 kg, lastna masa: 5.100 kg, barva: siv, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2014, največja dovoljena obremenitev: 21.900 kg, naslednji pregled (TÜV): 03/2027, vzmetenje: jeklo, velikost pnevmatike: 265/70 R19.5, velikost sprednje pnevmatike: 265/70 R19.5, velikost zadnje pnevmatike: 265/70 R19.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Müller Mitteltal remorque 3 essieux pour conteneurs à benne basculante TM 2 24,0
* Conçue pour 2 conteneurs/bennes de 12 m³ chacun
* Timon pneumatique abaissable pour chargement frontal
* Point d'arrêt réglable pour la fixation du conteneur
* Arrimage manuel avec cliquets
* Plancher étanche
* Essieux BPW
* Suspension à lames
* Châssis/cadre galvanisé
* Freins à tambour
* Plaques d'usure
* Phares additionnels
* 7 anneaux d'arrimage par côté montés à l'extérieur
* Grande caisse à outils
* Poids : PTAC - 27 000 kg, Poids à vide - 5 170 kg, Charge utile - 21 830 kg
* Véhicule allemand avec papiers allemands !!
* 1ère main !!
* 1ère mise en circulation : 21.10.2014
* Contrôle technique valable jusqu'à 03/2027
* Contrôle sécurité valable jusqu'à 09/2026
* VIN : WMM00000E0058208
Sous réserve de vente préalable, erreurs et modifications !
Laedpfxozbbbdj Aicoc
Les logos d'entreprise ont été supprimés de certaines photos – merci de demander !
Aucune garantie sur le fonctionnement des équipements supplémentaires !
Contact :
Christoph Ott
Tél. + WhatsApp :
Mali oglas
Lübbecke
828 km
Nizki nakladalnik
Müller-MitteltalTieflader mit Radmulden Langerampen
Pokliči
Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in oprema =
- Rezervno kolo
- Dvojne pnevmatike
= Opombe =
Müller Mitteltal 2-osni nizkopodni priklopnik T5 2AL z rampami
Zračno vzmetenje
BPW osi
ABS ZSA
Pnevmatike 60% GR 235R17,5
ID številka 665
Z veseljem vas pričakujemo za svetovanje, podpis pogodbe ali prevzem vozila v našem avtohiši. Prosimo, da se predhodno dogovorite za termin.
Če ne morete priti k nam, vam celoten postopek uredimo tudi po telefonu/e-pošti/WhatsAppu/faksu.
Po želji vam novo vozilo dostavimo neposredno na vaš dom.
To za vas pomeni najboljšo ceno, največjo varnost in udobje pri nakupu vozila.
Odkup rabljenih vozil
Z veseljem odkupimo vaše rabljeno vozilo.
Ponujamo vam možnost digitalne ocene vozila na podlagi vaših fotografij, brez obiska avtohiše.
Naša specializirana odkupna ekipa vam zagotovi najvišjo odkupno ceno.
Na željo vam po vsej Nemčiji dostavimo izbrano "rabljeno vozilo" neposredno do vaših vrat ter vaše rabljeno vozilo vzamemo s seboj.
Financiranje - Leasing
Takojšnja odobritev in poplačilo starega kredita.
Vaš specializiran partner za osebna vozila, dostavnike, gospodarska vozila in gradbene stroje.
ITC GmbH & Co KG
Siemensstraße 7
32312 Lübbecke (industrijska cona)
Obiščite našo spletno stran
Vedno preko 400 vozil na zalogi
Navedbe v oglasih, na spletu, cenikih in slikah so nezavezujoči opisi in ne pomenijo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti ali jamstva za tipkarske napake oziroma napake pri prenosu podatkov. Oprema, navedena v oglasu, je lahko predmet posebnega preverjanja. Ponudba je na splošno brez nove TÜV homologacije - z veseljem izdelamo ponudbo v sodelovanju z našim partnerskim servisom. Možnost napak in predhodne prodaje pridržana.
Lodpexw T Uaefx Aiceac
= Dodatne informacije =
Lastna teža: 8.900 kg
Nosilnost: 26.100 kg
Dovoljena skupna masa: 35.000 kg
Prodajna cena: 18.000 € / 20.890 US$
Mali oglas
Bovenden
710 km
Odvozna prikolica
Müller-MitteltalTRA-Kombi 18,0 Abroll/Absetz/Tieflader
Pokliči
Stanje: rabljeno, lastna masa: 5.100 kg, največja dovoljena obremenitev: 12.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/1998, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1 mm, skupna dolžina: 2.550 mm, skupna širina: 1.600 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, medosna razdalja: 5.400 mm, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing eyes, container locking system, underrun protection, pneumatically adjustable drawbar, side aluminum underrun protection, twin tires, storage box, removable side panels
Wheelbase: 5400 mm
Body: Trailer for roll-off containers with lengths from 6m to 6.75m, SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for plug-in locking hooks, 4x pockets for plug-in container centering and skip stops. The trailer can also be used as a flatbed! Aluminum side panels with a height of 600 mm are included with the trailer!
Lodpfei Rpxwjx Aicoac
Ramps available at an additional price of €900.00 net!
ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors.
Mali oglas
Alsdorf
835 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTALETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
Pokliči
Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-over Platform Trailer
Ref. for enquiries: 11630
Vehicle available immediately from stock in Alsdorf
New vehicle inc. COC
* Gross weight: 21 t, Payload: 16.5 t, hot-dip galvanized chassis
* Platform version with 400 mm high front wall, ramp securing via ramp holding rods and diagonal bracing
* Version with gross weight 21 t, reinforced frame and axles, axle spacing 1,810 mm
* Floor height approx. 910 mm loaded / approx. 940 mm unloaded
* 7 m loading area with 400 mm high front wall
* Extended ramps: 3 m one-piece hot-dip galvanized ramps with galvanized grating
* Ramp lift with vertically standing, adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV folding lashing brackets (LC 8,000 daN) mounted in the existing hole pattern in the 45° outer frame, positioned approx. 1 m from front/rear crossmember
* 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole pattern in the outer frame
* 2 UVV lashing rings each at front and rear, recessed in crossmember, LC 10,000 daN
* Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and end crossmember
* Preparation for retrofitting container locks (container locks available at extra cost)
* Softwood floor, 50 mm thick
* Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering
* 235/75R 17.5 (twin tyres, 8x) with tyre pressure monitoring sensor
* Plastic toolbox in front of the front wall, right-hand side in direction of travel
* LED lighting system
* 7-pin socket at rear, prepared for overlength lighting with tail light (58 R) and ground
* 2 LED reversing lights at rear
* Flashing side marker lights
* Oversize warning panel
* 1 removable all-round LED beacon incl. bracket and installation
* Folding supports at rear, front support leg with geared winding mechanism
----
Lease purchase example from our partner MMV Leasing: €665/month net for 60 months term with no down payment and €0 final instalment
Other terms with/without down payment/final value possible!
We are Müller-Mitteltal authorised dealer
----* Our business hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside business hours available by appointment
* We speak German, English, Russian, Polish, French
Lsdsyvxg Uspfx Aicoac
* WhatsApp
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTALPT40 Sonderpreis, Tieflader mit hydr. Rampen
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 4 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering system, including RtR valve
----Drawbar:
* Drawbar with 50 mm towing eye and height adjustment
----Lighting / Electrics:
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12 / 24 V
* Removable rear LED beacon
* 2 LED reversing lights (activated via reverse gear)
----General equipment:
* Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits)
* Side underrun protection
* Swing-down supports at the rear of the chassis frame
* Mechanically adjustable warning sign sets front and rear
* VA plastic quarter mudguards with spray protection
* HA straight galvanized steel skirts with spray protection
* Reflective contour tape on sides and rear
* Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high
----Low loader platform:
* Forepart in front of the turntable platform, approx. 490 mm long with 45° corners
* ROBOT-welded anti-slip surface on the steel plate of the turntable platform
* Hardwood floor on the running surfaces of the low loader platform
----Load securing (La-Si package comprising):
* In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right
* 4 lateral holes each in the turntable platform with 2 t lashing capacity each
* 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support
* 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame
* 3 pockets for stanchions per side, with simultaneous 2 t lashing facility
----Widening package:
* Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper)
* Plank holder for extensions under the chassis on the left, longitudinally
----Excavator arm rest:
* Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep
* 2 pairs of 6.4 t lashing points each side in the excavator arm rest
----Ramps:
* Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways
* Outer planks of ramps made from hardwood
* Steel structure prepped for 6-section control valve
----Loading height:
* Loading edge unladen approx. 950 mm +/- 20 mm
----Tires:
* 235/75 R 17.5 tires
----Paintwork:
* Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized
* -- Axles, air tanks, drawbar finished in a shade of black --
----Information:
* Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used
* New vehicle with manufacturer’s warranty
Laedpfx Ajl Tlhrjicsc
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
Laodpfx Aorwc R Rsicjc
----Suspension:
* Parabolic springs with equalizing device
----Drawbar / Flange Hitch Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Fittings:
* Landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* 50 mm softwood floor
* Provisions in front of the bulkhead for retrofitting container locks
* Bolt-on 400 mm bulkhead made of smooth sheet
* Removable rear stanchions, bolted
* Drop sides with spring assist
----Load securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* 1 x 6.3 t lashing point in each front and rear corner
* Various holes in the headboard and rear crossmember for 1.2 t lashing options
* Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN
----Ramps:
* One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min)
----Painting:
* Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized
* Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade
* Drop sides painted in RAL 9010 pure white
* Painting of the side walls in a RAL color of your choice available at extra charge
----Information:
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex Egestorf
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
Ledjv Eq Evjpfx Aicoac
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm, up to 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General Attachments:
* Support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on headboard
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Fittings for retrofitting container locks in front of the headboard and rear slope for the transport of 20" containers
* Bolted headboard, smooth sheet
* Side walls: folding, split once in the middle, made of trapezoidal sheet metal
* Steel rear wall, can be inserted between ramp holders, stored in front of the headboard when not in use
* Bolted rear stakes
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Option for installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each of the front and rear corners
* Various holes in headboard and end beam for 1.2 t lashing options
* Profifix lashing rail in longitudinal axis, central, for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance)
* Rear approach slope approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, headboard, tailgate, folding supports and drive-on ramps hot-dip galvanized
* Axles, springs, air tank, flange towing eye and support winch painted in black
* Side wall panels painted in a RAL colour of your choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approx. week 30 / 2026
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4
----Brake System:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrical:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
Laedpfx Aoq Dyvyeicjc
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted externally at the front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists
* Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load Securing:
* Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t fold-down lashing rings possible every 600 mm
* 1 x 6.3 t lashing ring at each front and rear corner
* Various holes for 1.2 t lashing options in bulkhead and rear crossmember
----Ramps:
* One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps
* Side wall color in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra cost
----Info:
* — Reinforced and certified body according to EN 12642 XL including load securing certificate —
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
----Delivery time:
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTALPT 40 Sonderpreis, Tieflader mit hydr. Rampen
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 4 x 11 tonne Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RtR valve
----Drawbar:
* Drawbar with 50 mm towing eye and height adjustment
----Lighting / Electrical:
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12 / 24 V
* LED rotating beacon (removable) at the rear
* 2 LED reversing lights (activated via reverse gear)
----General Attachments:
* Manometer (pressure gauge) for load weight determination (axles separated into 2 air suspension circuits)
Lodpfx Aijl Tnu Aocsac
* Side underrun protection
* Swing-down supports at the rear of the chassis frame
* Mechanically adjustable warning boards, front and rear
* Front axle plastic mudguards with spray protection
* Rear axle straight galvanized steel side skirts with spray protection
* Reflective contour tape on the sides and rear
* Tool box, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high
----Low Loader Platform:
* Front extension in front of the turntable platform, approx. 490 mm long with 45° corners
* ROBOT-WELDED anti-slip coating on the steel plate of the turntable platform
* Hardwood flooring on the running areas of the low-bed platform
----Load Securing (La-Si package consists of):
* 1 x 13.4 t UVV lashing ring left & right in front of the headboard carrier
* 4 fixing holes each side in the turntable platform, each with 2 t lashing capacity
* 1 pair of lashing rings (13.4 t), suspended at the rear left & right in front of the rear carrier
* 4 pairs of UVV lashing rings (10 t) per side, pivotable and lowerable, loadable in all directions and recessed into the external frame
* 3 stake pockets per side, each offering 2 t lashing capability simultaneously
----Widening Package:
* Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear slope)
* Beam bracket for widenings under the chassis on the left, longitudinally mounted
----Excavator Arm Rest:
* Excavator arm rest above the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep
* 2 pairs of 6.4 t lashing rings per side in the excavator arm rest
----Ramps:
* Hydraulically operated one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways
* Outer planks of the ramps made from hardwood
* Steel construction prepared for 6-way control valve
----Loading Height:
* Loading edge unladen approx. 950 mm +/- 20 mm
----Tyres:
* Tyres 235/75 R 17.5
----Coating/Paintwork:
* Chassis, turntable, folding outriggers, mechanical supports, and drive-on ramps hot-dip galvanized
* --Axles, air tanks, drawbar painted black--
----Infos:
* Vehicle has a daily registration as of 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately from Egestorf
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4
----Braking System:
* EBS Electronic Braking System
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow Bar / Flange Towing Eye:
* Height-adjustable tow bar, adjustable by 300 mm
* Tow bar extension by 250 mm to a total of 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED rear lights 12 / 24 V
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right side of the headboard
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the headboard for retrofitting container locks
* Bolted headboard made of smooth sheet metal
* Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist
* Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard
* Bolt-on rear posts
* Rear approach angle approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Possible installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing point in each front and rear corner
* Various holes in the front and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps
Ljdpfx Aiopk Dv Rjcjac
* Side wall color RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex works Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic suspension with equalizer unit
----Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by approx. 300 mm
* Drawbar extension by 250 mm (up to 2,250 mm)
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right outside on the front wall
* Side underrun protection
* Plastic quarter mudguards
Ljdpfxoxglibo Aiceac
----Low-bed loading area:
* 50 mm softwood flooring
* Pre-equipment for retrofitting container locks in front of the front wall
* Bolted front wall made of smooth sheet metal
* Foldable, trapezoidal-profiled steel side walls with drop-side spring assist
* Sliding steel rear wall between the ramps (bracket for storage when not in use inside the front wall)
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm
* Option to fit 3 t drop lashing rings every 600 mm
* In each corner, front and rear: 1 x 6.3 t lashing ring
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* One-piece mechanical steel mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear wall
* Drop-side color in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra cost
----Info:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors excepted
----Delivery time:
* Available from approx. calendar week 30/2026
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL18t. Kombi, Abroller Absetzer Tieflader, Parabel
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0:
* 3-in-1 = for roll-off containers, skip containers, and as a low-loader
----Brakes:
* TPMS (Tire Pressure Monitoring System)
* EBS-E (Electronic Braking System)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 12 t Gigant axles
----Suspension:
* Parabolic springs
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long
* 40 mm drawbar eye with height adjustment device
----Electrics / Lighting:
Ledpfol Thv Rjx Aicsac
* LED tail lights
* 15-pin power connector
* TPMS, display option in the truck via EBS signal (no installation required on the truck side)
----General Attachments:
* Toolbox made of powder-coated steel sheet, right side
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Storage box made of galvanized sheet metal for container nets, approx. 960 x 300 x 400/450 mm, right side
* Plastic bumper buffer at rear
* Mechanical drop-down supports at rear
----Load Area:
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers
* Steel floor with roller recesses in the bogie area
* Possible to transport roll-off containers with a length of 5,500–7,000 mm
* Pneumatic four-point clamp locking as well as mechanical locking angles at the front in the track, securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with max. volume of 10 m³ possible
* Includes 8 removable tub stops for lateral centering of the tubs; front 4 stops plugged in with pivotable stop
* Weld bead as anti-slip coating in the ramp area of the run-up incline
----Load Securing:
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to securely fix the tubs
* 4 lashing bars per side, cloverleaf design
* 1 pair of 13.4 t UVV lashing rings at the front
----Ramps:
* 1 pair of aluminium drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear)
----Information:
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Permissible gross weight up to 20,000 kg technically possible
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. calendar week 44 / 2026
Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTAL18t. Kombi, Abroller Absetzer Tieflader, Parabel
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0:
* 3 in 1 = for roll-off containers, skip containers, and as a low-loader
----Brakes:
* TPMS (Tire Pressure Monitoring System)
* EBS-E (Electronic Braking System)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 12 t Gigant axles
----Suspension:
* Parabolic springs
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long
* 40 mm towing eye and height adjustment device
----Electrical / Lighting:
* LED tail lights
* 15-pin power connector
* TPMS, display option in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Tool box made of powder-coated sheet steel, right side
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side
* Plastic rear collision protection buffers
* Mechanical drop-down supports at the rear
----Loading Area:
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll containers
* Steel floor with roller recesses in the bogie area
* For roll-off container transport, possible container length from 5,500 to 7,000 mm
* Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with max. 10 m³ volume possible
* Includes 8 removable skip stops for lateral centering of the skips, front 4 skip stops inserted with pendulum mount
* Weld bead as anti-slip coating in the ramp area
----Load Securing:
* 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips
* 4 lashing bars each, cloverleaf design (side)
* 1 pair of 13.4 t UVV lashing rings to the front
----Ramps:
* 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Information:
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Permissible gross weight of 20,000 kg technically possible
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
Laodpfxel Thwcs Aicjc
----Delivery time:
* Available from approx. CW 44 / 2026
Olajšamo vam iskanje: "müller-mitteltal 5 achs tieflader, nachlauflenkachse, ma liftbar"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.



















































































































































































































































































































































































