Stanje: novo, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, MAX Trailer Type 100 NEW | Extendable | 39t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your application. High payload capacity with rugged construction and maximum cost-efficiency. --- Highlights: • Approx. 39,600 kg payload • Loading platform 8,600 mm + 5,400 mm extendable • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system --- Technical Data: Cpodpfx Asypa Npsbvsw • Gross vehicle weight: 49,500 kg • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Speed: 80 km/h --- Standard Equipment: • Extendable loading platform with durable hardwood floor • Galvanised steel ramps with hydraulic lifting mechanism • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) --- Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power pack under loading platform • Extendable warning signs with LED • Reflective tape in accordance with EU regulations • Rotating beacon holder at rear • Ramp control valves on right side Additional equipment and individual adaptations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 39.000 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Trailer Type 110 NEW | Hydraulic steering – extendable | 39t payload | 3 axles | from €97,400 New vehicle, customizable to your specific operation requirements. High payload with robust design and maximum cost-efficiency. ----Highlights: • Extendable loading platform with durable 48 mm hardwood floor • Galvanized steel ramps with hydraulic lifting mechanism (up to 40,000 kg load capacity) • Hydro-mechanically forced-steered BPW axles with air suspension Cpsdpfx Aoypa Rgobvow • Heavy-duty lashing points for professional load securing • WABCO EBS braking system according to EU regulations • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Body & Construction • High-tensile fine-grained steel construction • Metallized vehicle chassis for optimal corrosion protection • Multi-layer paint structure with additional cavity sealing • Checker plate above axles for increased durability Very important for trust. ----Included options • Galvanized front wall (approx. 400 mm) • Electro-hydraulic power pack • Convenient cable remote steering • Spare wheel with holder • Galvanized folding supports • Extendable warning panels with LED • Beacon bracket • Reflective tape according to EU regulations ----Further equipment and customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 39.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 875 mm, Oprema: ABS, Kässbohrer SLS 3 | Rigid Low Loader | from €47,000 New vehicle – individually configurable for your application. The Kässbohrer SLS 3 is a robust rigid low loader designed for daily use in machinery, construction, and special transport sectors. With its low loading height, high stability, and proven Kässbohrer quality, it offers maximum cost efficiency and ease of operation. Attractive entry-level price—ideal as a base vehicle with a wide range of upgrade options. ---Highlights--- - Low deck height for easy loading and unloading - Sturdy S700 MC steel construction - High payload capacity with low tare weight - Proven Kässbohrer chassis and braking system ---Technical data--- Cjdpjypa Acefx Abvepw - Fifth wheel height: approx. 1,250 mm - Platform length: approx. 9,240 mm - Gooseneck length: approx. 3,950 mm - Deck height: approx. 875 mm - Overall width: 2,550 mm (optionally extendable) - Axles: 3 × BPW with air suspension - Axle load: 30,000 kg (3 × 10 t) - Permissible gross weight: * 48,000 kg at 80 km/h * 52,800 kg at 60 km/h - Unladen weight: approx. 8,527 kg ---Standard equipment--- - Frame made of high-tensile S700 MC steel - 45 mm hardwood floor on the platform - WABCO EBS brake system 2S/2M with ABS and RSS - Air suspension with load gauge - Mechanical supports front and rear - High-strength lashing rings on gooseneck and platform - LED lighting system in accordance with ECE R48 - Steel toolbox - Wheel chocks with holders - Spare wheel carrier on the front wall ---Included options--- - Extendable width marker boards incl. LED position lights - Rotating beacon - Rear LED work lights - Rear angle 10° executed - Container lock pockets for 1×20 ft - Side and rear markings as per ECE regulations Other equipment and custom adaptations available on request – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 16.390 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Oprema: ABS, MAX Trailer 300 NEW | 7.0 m Loading Platform | 16.4 t Payload | Ramps | from €38,600 New vehicle – configurable to your specific requirements. Compact and robust low-loader trailer designed for the safe transport of machinery, equipment, and vehicles. Engineered for high payload, easy handling, and cost-effective operation in daily use. --- Highlights --- • Approx. 16,390 kg payload • 7,000 mm loading platform length • Rear chamfer for easy loading • Manually adjustable aluminium ramps • Ramp load capacity up to 24,000 kg per pair • BPW axles with air suspension • EBS braking system • Compact dimensions – ideal for construction sites & service applications --- Technical Data --- • Gross weight: 21,000 kg • Unladen weight: approx. 4,610 kg (±3%) • Payload: approx. 16,390 kg • Loading platform length: 7,000 mm • Total width: 2,480 mm • Loading height at max. load: approx. 860 mm • Coupling heights: 700 / 775 / 850 mm • Maximum speed: 80 km/h --- Standard Features --- • Loading platform with hardwood flooring (approx. 38 mm) • Tread plate covering over the axles • Lashing points up to LC 5,000 daN and recessed lashing rings in the frame • Cut-outs in the outer frame for tension belts • BPW axles, air suspension, drum brakes with lift/lower function • EBS braking system (2S/2M) with spiral cable • LED lighting ASPÖCK NORDIK • Tire pressure monitoring system TPMS (ECE R141) --- Included Options / Accessories --- • Drawbar approx. 1,750 mm with 50 mm towing eye • Galvanised steel front wall, approx. 400 mm Cjdpfxsypa Ape Abvepw • Spare wheel with holder on the drawbar • Manual support leg at the front • Galvanised folding supports under the loading platform chamfer • European rear reflector panels • White reflective tape on sides and rear • Beacon holder at the rear • Holders for warning signs including socket • Mud flaps with MAX logo • Additional number plate holder rear right • User manual & documentation on USB stick Further equipment and individual adaptations are possible at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 34.700 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 3.930 mm, Oprema: ABS, Horizontal Silo Semi-Trailer NEW | 31–38 m³ | Lightweight Aluminium | from €58,000 New vehicle – individually configurable for your application requirements. Horizontal silo semi-trailer in robust lightweight aluminium construction for cost-effective bulk material transport. Also available in 35 m³ and 38 m³ versions. ----Highlights • Horizontal silo semi-trailer made of lightweight aluminium • Capacity options: 31 m³, 35 m³, or 38 m³ • High payload with low unladen weight • User-friendly and safe unloading system • Low-maintenance, durable construction for daily operation ----Technical Specifications • Type: Horizontal silo semi-trailer • Volume: 31 m³ to 38 m³ (depending on configuration) • Tank: Welded aluminium silo body • Compartments: Single compartment • Manholes: 2 × DN 450 • Discharge: Rear discharge DN 100 • Operating pressure: up to 2.0 bar • Test pressure: up to 3.0 bar • Operating temperature: approx. –20°C to +80°C ----Standard Equipment • Aluminium catwalk with anti-slip safety grating • Foldable safety railing (UVV-compliant) • Aluminium access ladder at the rear • 2" top air line at the front • 3" side air line on the left with Storz coupling • Non-return and vent valves • Anti-slip strips in manhole area • Sight glass at outlet • Hose storage for compressed air hoses • Integrated toolbox ----Chassis & Safety • 3 BPW axles with air suspension and disc brakes • Automatic lift axle (axle-dependent, EBS-controlled) • EBS braking system with stability control • Tire pressure monitoring system (TPMS) according to ECE R141 • LED lighting system in compliance with EU regulations • White side reflex tape, red rear marking tape ----Included Options / Accessories • Wheel nut caps with manufacturer’s logo • Load control pressure gauge • Work light on tank • Mechanical JOST landing legs Cpodoypa Avopfx Abvjw • Aluminium rims (manufacturer selection) Further features and individual customisation available at any time – we configure your vehicle exactly to your requirements. Sample image. Equipment may vary depending on configuration.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, New vehicle / stock vehicle / inbound? Also individually configurable / from €29,900 -- For sale is a Wielton construction materials semi-trailer, designed for professional use in building materials and general cargo transport. Note: Cedpfx Aoypa A Aebvjpw The equipment listed below describes a current stock or pre-ordered vehicle. Deviations depending on the specific vehicle, production status, or individual customer configuration are possible. ----Chassis Load floor made of 30 mm phenolic plywood, load capacity 7.5 t * Steel lamp bracket, 371 mm * 19 pairs of lashing rings, each 2.0 t * Rubber-steel rear impact buffers * Folding rear underrun protection * Rear underrun protection made of steel * Lateral underrun protection made of aluminum ----Axles and Suspension 3 axles, rigid version * SAF disc brake axles, 3 × 9,000 kg, 22.5" INTRADISC * 1st axle lifting axle * No lift axle on the 3rd axle * Fifth wheel height approx. 1,120 mm ----Landing Gear SAF Hercules 2-speed landing gear, full-load ----Mudguards PVC mudguards, half shell, 2 front / 2 rear ----Rims 6 × steel rims 22.5 × 11.75, ET-120 * Wheel nut protection caps * Without spare wheel rim ----Tyres 6 × 385/65 R 22.5 according to manufacturer selection Options: * GOODYEAR KMAX G2 T M+S 3PMSF Roll resistance: B | Wet grip: C | Noise: 71 dB * BRIDGESTONE Ecopia H-TRAILER 002 M+S 3PMSF Roll resistance: A | Wet grip: B | Noise: 68 dB * Without spare tyre ----Other Chassis Equipment 2 × toolboxes, each 165 l * Spare wheel basket * Extendable width marker boards ----Superstructure Front wall H = 1,800 mm, galvanised splash plate up to top edge * Drop sides 1,000 mm * Bolt-on drop sides * Folding drop side at rear ----Braking System / Pneumatics WABCO braking system with basic modulator * RSS / RSP * Aluminium air tanks * RTR automatic self-levelling * Brake system WABCO or Knorr with H-S-valve ----Electrical System Full LED lighting Aspöck ECOLED II * Flashing side marker lights * 2 LED reversing lights * 2 × 7-pole + 1 × 15-pole, incl. EBS connection * Without connection cables to tractor unit ----Paintwork / Surfaces Frame hot-dip galvanized, unpainted * Side walls anodised, unpainted ----Additional Systems ABERG TPMS tyre pressure and temperature monitoring * Sensors on rims * Control unit connected to EBS * Developed for semi-trailers and trailers ----Marking Partial contour marking with Wielton logo * White on the sides, red at the rear * Wielton warning stickers * Vehicle labeling in German ----Further equipment and individual customizations available at any time – we will configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: rabljeno, prevoženi kilometri: 641.000 km, moč: 375 kW (509,86 KM), prva registracija: 10/2021, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Engine & Drivetrain: * Volvo D13K500, 12.8 L diesel engine with 510 HP (375 kW) and 2,550 Nm * Euro 6 emissions standard with SCR, particulate filter, and EGR * I-Shift 12-speed automated transmission (AT2612F) * Rear axle RSS1344E with 2.31:1 ratio * Gross combination weight up to 44 t Chassis & Suspension: * 4x2 tractor unit with a 3,800 mm wheelbase * Air suspension front and rear * Reinforced anti-roll bars front and rear * Aluminium air tanks, EBS braking system with ESP Cab: * Globetrotter XL cab (extra high) * Comfort seats (air-suspended, with seat-integrated belt) * Two bunks (lower with pocket spring mattress, upper foldable) * I-Park Cool stationary air conditioning + auxiliary heater * 33 L fridge with freezer compartment * Electric sunroof (tinted), sun blinds, blackout curtains * Leather armrests, table at bunk, numerous storage compartments Comfort & Safety: * Driver comfort package "Superplus" * LED main and fog lights, automatic headlight leveling * Lane departure warning, adaptive cruise control (ACC) with emergency braking function * Immobiliser, smoke detector, eco cruise control * Digital tachograph (Gen 2), 12" driver display + 9" touchscreen Equipment & Details: * Two 560 mm high aluminium tanks: 505 L + 475 L * 65 L AdBlue tank * Michelin tyres: 315/60R22.5 (front), 295/60R22.5 (rear) * 22.5" steel rims * Paint: Winter White, radiator grille matching body colour * Central locking with remote control * Fire extinguisher bracket, on-board tools, jack Codpsypa Dgjfx Abvjpw All information without guarantee!

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.350 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.650 mm, skupna širina: 2.600 mm, Oprema: ABS, Lamberet SR2 Greenliner Refrigerated Trailer NEW | XL | from €46,900 New trailer without refrigeration unit – fully configurable to your specific application. Refrigeration unit can be selected freely – sample image shows an optionally installed unit. Highlights: • Premium Lamberet SR2 Greenliner refrigerated trailer • XL body for maximum transport efficiency • Unit selectable according to customer requirements • Branded running gear for high operational safety • Ideal for demanding chilled and fresh logistics Special Equipment Features (excerpt): Codpfx Ajypa Dtsbvopw • Insulated refrigerated box with efficient air circulation • Non-slip, heavy-duty floor • LED interior lighting with daylight effect • Full-width rear doors with multi-lip sealing • Anchor rails for professional load securing Chassis & Safety: • SAF 3-axle running gear with disc brakes • WABCO EBS Premium with stability control • Lift axle for reduced tire wear • Pneumatic ride height adjustment • Tire pressure monitoring system (TPMS) • High-quality branded tires Structure & Durability: • Galvanised chassis with premium coating • Reinforced superstructure for professional daily use • Aluminium fuel tank (approx. 240 L) • ATP certification possible (upon technical inspection) Additional equipment and individual customization available at any time – we configure your vehicle precisely to your requirements. Sample photo shows vehicle with optional refrigeration unit. Specification may vary depending on configuration.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, New vehicle / stock vehicle / inbound delivery? Also available in various volumes / from €42,500,-- For sale: Wielton Bulk Master tipping semi-trailer 51 m³, designed for heavy-duty applications in bulk, agricultural, and mass transport. The Bulk Master is available in various versions with body volumes from approx. 37 m³ to approx. 67 m³. Note: The equipment specified below describes a current stock or pre-ordered vehicle. Dimensions, weights, volumes, and specifications may vary depending on the vehicle, production status, or individual customer configuration. --- Dimensions / Weights --- Total length: 11,087 mm * Internal length (measured at centre of body height): 9,890 mm * Floor length: 9,270 mm * Total width: 2,550 mm * Internal width (measured at centre of body height): 2,460 mm * Internal width at upper frame: 2,350 mm * Total height to upper frame: 3,500 – 3,550 mm * Total height to top of tarpaulin: 3,660 – 3,710 mm * Internal height: 2,100 mm * Track width: 2,040 mm * Kingpin to 2nd axle distance: 6,710 – 6,810 mm * Saddle height: 1,150 – 1,200 mm * Axle spacing: 1,310 – 1,410 mm * Rear overhang: 1,362 mm * Floor height: 1,400 – 1,450 mm * Max. height, body tipped: 9,860 – 9,910 mm * Gross weight: 36,000 kg * Technical gross weight: 42,000 kg * Axle load: 8,000 kg (technically 9,000 kg) * Fifth wheel load: 12,000 kg (technically 15,000 kg) * Load volume: approx. 51.1 m³ * Manufacturer designation (homologation): NW-3 * Unladen weight: approx. 6,146 kg (weight tolerance ±3%) --- Chassis / Technology --- Steel underrun protection * Rear foldable underrun guard * Saddle height unladen approx. 1,150 mm * SAF disc axles 3 × 9,000 kg, 22.5" INTRADISC CD * 1st axle as lift axle * Tyres 6 × 385/65 R 22.5 (manufacturer as desired) * Toolbox 165 l, mounted left mid-section * Water tank 30 l, mounted right mid-section * Dust bag holder * Shovel and broom mounted on front wall --- Body / Tipping Body --- Combi door version * Volume: 51 m³ * Front wall 20° angled * Side walls heavy-duty, internal thickness 3.9 mm, fully welded * Internal height 2,100 mm * Double-wing aluminium combination door (left + right), vertical, with portal beam * 2 grain discharge chutes * 2 lower tension locks * Pallet-width design * Cross member spacing in floor: 360 mm * Floor thickness 5 / 7 mm * Tension chain between side walls * Control station on front wall, access on left in direction of travel --- Cover --- PVC rolling tarpaulin 680 g/m² --- Brake system / Pneumatics --- Aluminium air tank * Spring pressure manometer * Automatic lowering when tipping, can be switched off * WABCO brake system 2S/2M Cjdpfx Aboypa Ekovjpw --- Hydraulics --- HYVA hydraulic cylinder, eye mounting at top * Tipping angle indicator --- Electrical --- Full LED lighting * 2 LED work lights on side impact guard * 2 LED reversing lights * 2 × 7-pin + 1 × 15-pin, incl. EBS connection (without cables to tractor unit) * Aspöck ECOLED II lighting with flashing side marker lamps --- Additional Systems --- ABERG TPMS – tyre pressure and temperature monitoring * Control line for lift axle from cab --- Paintwork --- Chassis: RAL 7021 black grey * Body: RAL 9006 white aluminium * Tarpaulin: RAL 9006 white aluminium --- Other volumes (approx. 37–67 m³), equipment, and customised solutions available at any time – we configure your vehicle exactly to your requirements. Example photo. Features may differ depending on configuration.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, prostornina tovornega prostora: 92 m³, Oprema: ABS, Standard model, suitable for transporting dry bulk materials and palletized loads. - Chassis made of STEEL, preconfigured for Cargo Floor - 1st axle as lift axle - 3 SAF rigid axles, 9 tons each, with disc brakes Ø 430 mm - Air suspension with manual lifting/lowering valve - Support legs with universal foot (flat plate + half wheel) - EBS WABCO braking system 2s/2c - A.D.R. electrical system - Pneumatic parking brake - Wheel chocks and holders - Lateral safety guards - 6 PVC mudguards - 2 PVC toolboxes Internal dimensions: Length: 13,542 mm – Front height: 2,660 mm – Rear height: 2,814 mm – Width: 2,475 mm – Capacity: 92 m³ External dimensions: Length: 13,665 mm – Width: 2,542 mm – Height above ground: 4,000 mm – Fifth wheel height: 1,150 mm – Gross vehicle weight: 39,000 kg Moving Floor: CF500 Cargo Floor (moving floor) with 21 aluminum slats, thickness 10 mm, standard (smooth, longitudinally ribbed) - Rear floor section (300 mm) of stainless steel, approx. 4 mm thick - Remote control in a waterproof control box - Max. pressure valve (225 bar) and high-pressure oil filter - Board movement: 200 mm/cycle Subframe: - Made entirely from extruded aluminum profiles (cross members) - Moving floor supported longitudinally by aluminum tubes - Corrosion protection via polypropylene films between aluminum and steel Front wall: - Made of aluminum profiles 600/30/3/2 mm with reinforced upper profile - Front walkway with 2 ladders for accessing side tarpaulin - Connection strip (with sockets) for brake, lighting, and hydraulic systems - Upper square reinforcement plates between front and side walls Movable bulkhead: - Made of aluminum profiles and tarpaulin hem on the floor, with reinforced battens for tarpaulin attachment - Sliding partition, suspended on trollies with slide bearings on 2 rails Cpodpfoypa Hbsx Abvsw Side wall: - Made of aluminum profiles 600/30/3/2.5 mm, inside and outside welded to contour - Upper circumferential profile with rail for movable partition Rear frame: - Made of aluminum profiles with 2 doors of aluminum profiles 600/30/3/2.5 mm, surrounding door profile 50 mm, double seal - 4 aluminum hinges with galvanized pin (vertical), upright with handle, fully bolted stainless steel lock with vertical rod for each door - Rotatable upper rear cross brace (one piece) - Safety device for door release (pneumatically actuated) Roof: - 4 removable roof bows - Vertical tarpaulin securing straps, with 4 lateral tension belts - 2 straps running the full length - Tarpaulin 900 g/m² - Mounting the right tarpaulin by rivets along the top profile Paintwork: - Chassis color: MENCI SILVER GREY - Body color: MENCI SILVER GREY - Tarpaulin color: RAL 9006 Standard equipment: - 4 safety hooks for tarpaulin - Holder for shovel, broom, and rake - Manometer for weight control (63 mm diameter) in the moving floor control box - Compressed air gun connection at rear left - Prepared for tarpaulin roller (floor tarpaulin) at rear - Rear foldable guard for taillights Optional extras: - 6 SPEEDLINE alloy wheels 385/65 R 22.5, offset 120 - RADIO REMOTE CONTROL All details without guarantee!

Stanje: novo, največja dovoljena obremenitev: 34.720 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, DOLL LOGO 10X NEW | 3-axle bolster semi-trailer | Approx. 34.7 t payload | Long timber | from €55,000 New vehicle – individually configurable according to your operational requirements. 3-axle stepped-frame bolster semi-trailer for professional long and round timber transport. Designed for high payload, robust off-road and on-road use, and maximum flexibility in cargo handling. Highlights • Approx. 34,720 kg payload • 3-axle bolster semi-trailer for long and round timber transport • LOGO-10X version with reinforced frame drop • 6-bolster configuration with variable loading options • SAF axles with disc brakes • Lift axle (1st axle) • In-cab weight display (CAN-Bus) • Full LED lighting with dynamic indicators Technical Data • Gross vehicle weight rating: 39,500 kg • Fifth wheel load: 12,500 kg • Axle load: 27,000 kg • Unladen weight approx.: 4,780 kg • Payload approx.: 34,720 kg • Total length: approx. 9,195 mm • Loading length (B dimension): approx. 8,650 mm • Width: 2,550 mm • Coupling height loaded: approx. 1,100–1,250 mm • Loading height, bolster top loaded: approx. 1,080 mm • Max. total height: 4,000 mm Standard Equipment • High-strength, FEM-optimized frame made of fine-grain steel Cpedjypa Hzopfx Abvow • 2" kingpin, bolted and replaceable • 6 ExTe steel bolsters in LOGO-10X arrangement • Telescopic aluminium stakes • SAF 9 t axles with disc brakes (ET120) • Electronic braking system EBS-E incl. ABS • Conventional air suspension with automatic lift axle control • Side underrun protection according to ECE-R73 • Rear underrun protection according to ECE-R58-3 • Aluminium air tanks • Protected brake and electrical lines Included Options / Features (extract) • In-cab weight display via CAN-Bus • Tyre pressure monitoring system (TPMS) • Lift axle on the 1st axle • Steel frame covers at frame drop area • Chequer plate cover at rear section • Full LED lighting to ECE-R48 • LED work lights, side & rear • Grab protection (multiple executions) • Continuous mud flaps with DOLL logo • Conspicuity marking to ECE standard • TÜV certificate / vehicle documentation Further equipment options and individual customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Actual specification may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 33.570 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, DOLL LOGO 12X NEW ? 3-Axle Bunk Semi-Trailer | approx. 33.5 t Payload | from €38,500 New vehicle ? custom-configurable to your field of application. Robust bunk design for road and off-road (forest) use with high payload capacity. Highlights: ? Approx. 33,570 kg payload ? 3-axle bunk semi-trailer for long timber & roundwood ? 8 bunks ? versatile loading options ? SAF axles with disc brakes ? Full LED lighting with dynamic indicators ? Weight display in the driver’s cabin (CAN bus) Technical Data: ? Perm. gross weight: 39,500 kg ? Unladen weight approx.: 5,930 kg ? Axle load: 27,000 kg (9,000 kg per axle) ? Kingpin load: 12,500 kg ? Total length: 12,616 mm ? Loading length: 12,450 mm ? Width: 2,550 mm ? Coupling height loaded: approx. 1,100 – 1,250 mm Standard Equipment: ? High-strength, FEM-optimized frame made of fine-grained steel ? 2" kingpin, replaceable ? 8 DOLL steel bunks MAMMUT ? 16 aluminium stakes, loading height approx. 2,479 mm ? SAF axles 9 t with disc brakes & EBS ? Lift axle (1st axle) ? Air suspension with raise/lower function Csdsypa H Iepfx Abvopw ? Front wall according to EN 12642 Code L ? Full LED lighting, incl. work lights ? Underrun and rear impact protection to ECE standard Included Options / Accessories: ? Weight indicator via CAN bus ? Tire pressure monitoring system (TPMS) ? Continuous walkway/covering made of steel chequer plate ? Contour marking as per ECE ? Mudguards with DOLL logo ? Rear marker board ECE 70 ? COC document for registration Further equipment and individual customizations always available ? we configure your trailer exactly to your specifications. Sample photo. Features may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 31.950 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 30 m³, Oprema: ABS, Kässbohrer STC Chemical Tank Stainless Steel | ADR NEW | insulated | from €102,500 Cjdpfjypa H Ujx Abvspw New vehicle – specifically designed for the safe transport of chemical products. Robust stainless steel construction with ADR approval and high-quality insulation. Engineered for demanding operations in chemical and hazardous goods transportation. Highlights: - Stainless steel chemical tank, 30 m³ - ADR-approved (hazardous goods transport) - Insulated tank with heating channels (steam/water) - BPW axles with air suspension and disc brakes - EBS brake system with electronic stability control - High-quality stainless steel and aluminum components - Tire pressure monitoring system (TPMS) in accordance with ECE R141 Technical Data: - Total volume: 30,000 liters - Compartments: 1 chamber with baffle walls (7,500 l segments) - Gross weight: 39,000 kg - Unladen weight: approx. 7,050 kg - Axle load: 27,000 kg (3 axles) - Fifth wheel load (king pin): 12,000 kg - Operating temperature: up to 150 °C - Operating pressure: 3.0 bar - Test pressure: 4.0 bar Standard Equipment: - Cylindrical tank made of stainless steel AISI 316Ti - Insulation: 100 mm glass wool, stainless steel outer cladding - 4 manholes DN 500 with spill trays - Aluminum walkway along the entire tank length - Foldable stainless steel handrail & UVV-compliant access ladder - Heating channels for steam or hot water heating - Pneumatically operated bottom valve DN 80 - BPW axles with disc brakes - KNORR / WABCO EBS 2S/2M with RSS - Electronic air suspension ECAS - LED lighting system (ASPÖCK) Included Options: - Tire pressure monitoring system (TPMS) - Stainless steel toolbox - ADR equipment incl. warning panels & hazardous goods signs - Side and rear underrun protection made of aluminum - Hose holder left & right - Fire extinguisher box - Wheel nut covers with Kässbohrer logo Further features and individual customizations available at any time – we configure your vehicle precisely according to your requirements. Sample photo. Actual equipment may vary depending on the configuration.

Stanje: novo, največja dovoljena obremenitev: 18.275 kg, skupna masa: 25.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Low Loader NEW – Stepped Loading Platform | 18.3 t Payload | Ramps | from €47,400 New vehicle – individually configurable to your application. Robust low loader trailer for the secure transport of construction machinery, vehicles, and heavy equipment. Compact design with high payload and powerful ramp system for daily use on construction sites. ----Highlights ? Approx. 18,275 kg payload ? Stepped loading platform with rear bevel ? Hydraulic steel ramps, adjustable ? Ramp load capacity up to 40,000 kg per pair ? High-tensile steel construction ? BPW axles with air suspension ? EBS braking system with spiral cable ----Technical Specifications ? Gross weight: 25,000 kg ? Unladen weight: approx. 6,725 kg ? Payload: approx. 18,275 kg ? Load platform length: 8,600 mm ? Load height at max. load: approx. 860 mm ? Overall width: 2,540 mm ? Speed: 80 km/h ? Axle spacing: 1,360 mm ----Standard Equipment ? Stepped loading platform with hardwood floor (approx. 48 mm) ? Checker plate covering above the axles ? Multiple lashing points up to LC 10,000 daN ? Galvanized, one-piece steel ramps with hardwood covering ? Hydraulic ramp lift system ? High-strength fine-grained steels (S355 / S690) ? BPW axles, air-suspended, drum brakes ? LED lighting ASPÖCK NORDIK ? EBS brake system (2S/2M) ----Included Options / Accessories ? Bogie with towing bar (1,750 mm) and towing eye Ø 40 mm ? Electro-hydraulic unit mounted under the rear load platform ? Tire pressure monitoring system TPMS (ECE R141) Cpjdpfxoypa Irs Abvsw ? Cover plates between ramps and loading platform ? Ramp control valves at right side ? Galvanized supports under the platform slope ? Rotating beacon bracket at rear ? Extendable warning signs with LED ? Tools & documentation on USB ? Additional license plate holder, rear right ----Further equipment and custom adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 31 m³, Oprema: ABS, Menci Grapar TSA 105 PED NEW | 31,000 l | 3 Compartments | Pressure Tank | ATP | from €89,000 New vehicle – individually configurable for your specific application. PED-certified stainless steel pressure tank for the professional transport of sensitive liquid products. Designed to meet the highest safety, hygiene, and quality requirements. ----Highlights • PED pressure tank compliant with EU 2014/68 • Total capacity: 31,000 liters • Three compartments for flexible product separation • Tank made of AISI 304 L stainless steel, polished interior • ATP insulated – suitable for temperature-sensitive products • CIP cleaning system combined with compressed air system • High-quality SAF chassis with lift axle ----Technical Specifications (Excerpt) • Total tank volume: 31,000 liters • Compartment split: 12,500 l / 6,000 l / 12,500 l • Operating pressure: 2.0 bar • Design pressure: 2.2 bar • Test pressure: 3.5 bar Cpsdoypa Hhspfx Abvow • Compartments: 3, with DN 100 conical outlet valves • Certification: PED EU/2014/68 (with simultaneous pressurization of all compartments) • Axles: SAF INTRADISC PLUS, disc brakes Ø 430 mm • Lift axle: 1st axle, fully automatic, load-dependent ----Standard Equipment (Excerpt) • Grapar tank brand, AISI 304 L stainless steel • Interior polish in accordance with Code 1 – food-grade standard • DN 500 pressure manhole cover with safety valves • Stainless steel toolboxes with insulated doors and drain • CIP cleaning system with 5 removable spray heads • Compressed air system with air reservoir and process filter housing • Walkway on the left made of anodized aluminum with folding stainless steel handrail • Folding stainless steel access ladder • Gravity discharge via insulated outlets ----Chassis & Safety • Frame made of fine-grained steel, fully hot-dip galvanized • SAF 3-axle assembly, disc brakes • WABCO EBS brake system (2S/2M) incl. stability program • Automatic lift axle control with starting aid • Air suspension with automatic level control • Spray protection system in accordance with EU 109/2011 • Underrun protection compliant with ECE-R58R03 • ASPÖCK LED lighting system ----Included Options / Features • SPEEDLINE aluminum wheels 22.5" • Premium tires 385/65 R22.5 • Stainless steel toolbox and sterile box • Spare wheel carrier incl. mounting kit • Stainless steel manifold and reducers • Additional cleaning and ventilation connections • Chassis paint MB 7350 Nova Grey • Complete ECE signage & reflective markings Other equipment and individual customizations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 35.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Kässbohrer Tank Container Chassis NEW | 20 ft | also available in 30 ft variant | from €22,300 New vehicle – individually configurable to suit your application. High-quality tank container chassis for safe transport of 20-ft tank containers. Also available as a 30-ft variant – configuration according to customer requirements possible. ----Highlights * Suitable for 1 × 20 ft tank container * Also available as 30-ft tank container chassis * Very low tare weight (approx. 3,200 kg) * Robust, durable chassis with 10-year corrosion protection * Proven Kässbohrer quality for hazardous goods and tank logistics ----Technical Data * Gross weight: 39,000 kg * Axle load: 27,000 kg * Kingpin load: 12,000 kg * Fifth wheel height: 1,150 mm * Total length: 8,160 mm * Overall width: 2,550 mm * Unladen weight: approx. 3,200 kg * Axle spacing: * 1st–2nd axle: 1,310 mm * 2nd–3rd axle: 1,410 mm ----Standard Equipment * High-strength steel construction from S700 MC * KTL-coated chassis with 10-year corrosion protection * Container locks (JOST) for: * 1 × 20 ft tank container * Swap tanks (7,150 / 7,450 / 7,820 mm) * BPW axles, air suspension, disc brakes (3 × 9 t) * WABCO EBS brake system (2S/2M) incl. ABS & RSS * LED lighting system according to UN ECE R48 * Lateral underrun protection according to ECE R73 * Fixed underrun protection according to ECE R58.3 * Mechanical JOST landing gears (24 t) ----Included Options / Equipment * TPMS tire pressure monitoring system (WABCO OptiTire) * Aluminium rims (Kässbohrer selection) * ADR preparation (ADR-compliant, T9 document to be provided by customer) * Hose tray with stainless steel cover * Side and rear markings according to EU regulations * Fire extinguisher box * Manometer for axle load display * Mudguards & spray protection according to EU standard Cedpfoypa Nvox Abvspw ----Suitable for Tank Container Transport * Chemical and hazardous goods logistics * Liquid goods in ISO tank containers * National & international transport * Haulage companies operating 20-ft and 30-ft tank containers ----Further equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 50 m³, Oprema: ABS, Kässbohrer Tipping Silo Semi-Trailer NEW | 40–60 m³ | Aluminium | Food-Grade | from €65,900 New vehicle – individually configurable to suit your application. Silo semi-trailer for bulk goods – available for either industrial or food applications. Several volume options available (40 / 45 / 50 / 60 m³) – we will advise you based on your specific requirements. --- Highlights - Aluminium tipping silo, robust lightweight construction - Volume options: 40 / 45 / 50 / 60 m³ - Food-grade design optionally available (e.g. for flour, animal feed) - Tiltable tank with DN700 discharge cone - Internally ground weld seams Cedpoypa Rajfx Abvopw - BPW axles with air suspension & disc brakes - WABCO / KNORR EBS braking system - Non-slip catwalk with folding safety rail - High-quality corrosion protection & long-lasting paint finish --- Technical Data - Gross weight: 39,000 kg - Unladen weight: approx. 5,200 kg (±3%) - Axle load: 27,000 kg - Fifth wheel load: 12,000 kg - Tank diameter: approx. 2,530 mm - Vehicle height: approx. 4,000 mm - Saddle height: approx. 1,220 mm - Operating temperature: –20 °C to +80 °C - Operating pressure: 2.0 bar --- Standard Equipment - Aluminium tank with ground internal welds - 3 manholes DN450 - DN700 stainless steel discharge cone with fluidisation - Stainless steel mixing manifold with brass valves - Upper & side air pipes made from aluminium - Non-slip aluminium catwalk with folding fall protection - Aluminium access ladder in compliance with UVV regulations - BPW axles with air suspension & disc brakes - Lift axle (EBS-controlled) - Electronic air suspension (ECAS) - LED lighting (Aspöck) - JOST landing legs - Side and underrun protection in accordance with ECE --- Included Options / Special Equipment - Food-grade version available - Vacuum & non-return valves made of brass - Hose carriers on both sides (DN200) - Hydraulic tipping system (oil supply via tractor unit) - Load monitoring pressure gauge - Toolbox - Aluminium underrun protection (tiltable) - Side protection in aluminium - Reflective stripes as per ECE - Wheel nut covers with “K” logo --- Further equipment and customised solutions available at any time – we configure your vehicle exactly to your specifications. Sample photo. Actual equipment may vary depending on configuration.

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, WEB Trailer WF/W 22.5 NEW? Swap Body Chassis | for €17,500!!! New vehicle – individually configurable to your operational requirements. Swap body chassis for professional applications, suitable for 7,150–7,450 mm swap bodies. Robust construction with air-suspended running gear and high-quality corrosion protection. Highlights: - Swap body chassis for symmetrical swap bodies 7,150–7,450 mm - 2 outriggers + 4 retractable twist-lock fasteners (20 t) - Flush rear mount for 7,150 mm (incl. bumpers) - Air-suspended turntable with low-maintenance ball bearing slewing ring - Extendable drawbar - Hot-dip galvanized chassis for maximum durability Technical Data: - Ride height unladen: approx. 1,240 mm - Drop-off height: approx. 1,220–1,320 mm - Coupling height unladen: approx. 850 mm - Total air suspension travel: approx. 180 mm - Axle load: 9,000 kg - Tyres: 385/65 R22.5 - Towing eye: Ø 40 mm (for turntable trailers) Standard Equipment: - Chassis for swap bodies 7,150–7,450 mm - Folding, adjustable front stopper - Turntable with air suspension & ball bearing slewing ring (90 mm) Cpedpeypazrsfx Abvjw - Height adjustment via tension springs (e.g. with extendable drawbar) - Extendable drawbar 6 × 100 - Light/brake connection lines on the right of the drawbar - EBS braking system (Knorr or Wabco) incl. Roll Stability Program - Lift/lower valve on the left side in driving direction - Steel air tanks 2 × approx. 80 l - Side underrun protection both sides - LED lighting as per EU regulations Included Options: - Hot-dip galvanized chassis (without top coat) - Drawbar hot-dip galvanized (per customer requirement) - Lamp bracket galvanized & painted in RAL 9005 - Prepared for E-spare wheel holder (winch type) - Free choice of axle manufacturer (SAF / BPW / JOST) - Branded tyres of your choice by WEB Trailer - Red / yellow coupling heads - COC documents by System Trailers Further equipment and individual customization always possible – we configure your vehicle exactly to your requirements. Sample photo. Specification may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 37.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 200 NEW | extendable | 37t payload | 3 axles | from €57,000 New vehicle – customizable to your specific application. High payload with sturdy construction and maximum cost-effectiveness. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous heavy-duty lashing points for maximum load securing • BPW axles, air-suspended with disc brakes and lift/lower function • Self-tracking axles with electro-magnetic reverse lock • WABCO EBS brake system compliant with EU regulations • Robust steel construction with premium corrosion protection • LED lighting system • Mechanical JOST landing gear with 2-speed gearbox Cpsdpfxsypazxe Abvew • Tire Pressure Monitoring System (TPMS) ----Construction & Design • High-strength fine-grained steel construction for long service life • Metallized chassis with additional cavity sealing • Multi-layer paint finish for optimum protection • Durable wooden floor mounted in sturdy omega profiles ----Included Options • Galvanized front wall (approx. 1,200 mm) • Spare wheel holder under the loading platform • 10 pairs of stake pockets for flexible load securing • EN 12642-XL body • Reflective tape & European reflector plates • Brackets for warning signs incl. socket • Beacon brackets • Air couplings at the front ----Further equipment and individual customizations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2020, prostornina tovornega prostora: 92 m³, Oprema: ABS, Standard model, suitable for transporting dry bulk materials and palletized loads. - Chassis made of STEEL, pre-fitted for Cargo Floor. - 1st axle as lift axle - 3 rigid SAF axles, 9 tons each, with 430 mm disc brakes - Air suspension with manual raise/lower valve - Support legs with universal foot (flat plate + half-wheel) - EBS WABCO braking system 2S/2C - A.D.R. electrical system - Pneumatic parking brake - Wheel chocks and brackets - Side underrun protection Csdpfxsypa Dys Abvepw - 6 PVC mudguards - 2 PVC toolboxes Internal dimensions: Length: 13,542 mm – Front height: 2,660 mm – Rear height: 2,814 mm – Width: 2,475 mm – Volume: 92 m³ External dimensions: Length: 13,665 mm – Width: 2,542 mm – Height above ground: 4,000 mm – Fifth-wheel height: 1,150 mm – Gross weight: 39,000 kg Moving Floor: CF500 Cargo Floor (moving floor) with 21 aluminum planks, 10 mm thick, standard type (smooth, longitudinal ribbing) - Rear floor end (300 mm) in stainless steel, approx. 4 mm thick - Remote control in a waterproof control box - Max. pressure valve (225 bar) and high-pressure oil filter - Board movement: 200 mm per cycle Subframe: - Entirely made of extruded aluminum profiles (crossbeams) - Moving floor is longitudinally supported by aluminum tubes - Corrosion protection by polypropylene sheets applied between aluminum and steel Front wall: - Made from 600/30/3/2 mm aluminum profiles with reinforced top profile - Front catwalk with 2 ladders for side curtain operation - Connector strip (with sockets) for braking/electric/hydraulic systems - Upper square reinforcement plates between front wall and side wall Mobile partition wall: - Made from aluminum profiles and curtain bead at the floor, with reinforced strips for attaching curtains - Sliding partition, suspended from trolleys with slide bearings on two rails Side wall: - Made from 600/30/3/2.5 mm aluminum profiles, welded along the contour inside and outside - Upper continuous profile with a rail for the mobile partition Rear frame: - Made from aluminum profiles, with 2 doors (600/30/3/2.5 mm aluminum profile), 50 mm all-round door profile, double sealing - 4 aluminum hinges with galvanized pins (vertical), upright with handle - Fully screwed stainless steel lock with vertical tubular bar on each door - Rotatable upper rear cross member (one-piece) - Pneumatic safety device for door unlocking Roof: - 4 removable crossbars - Curtain fastening straps vertical, with 4 side tensioning straps - 2 tension belts across the full length - Curtain 900 g/m² - Right side curtain fixed by rivets along the surrounding profile Chassis color: SILVER GREY by MENCI Body color: MENCI SILVER GREY Curtain color: RAL 9006 Standard accessories: - 4 safety hooks for the curtain - Holder for shovel, broom, and rake - Manometer for weight monitoring (63 mm diameter) in moving floor control box - Compressed air gun connection on the left rear side - Prepared for rear floor tarp roller - Rear foldable protection for taillights Additional special equipment: - 6 SPEEDLINE LIGHT-ALLOY RIMS 385/65 R 22.5, OFFSET 120 - RADIO REMOTE CONTROL All details subject to change without notice!

Stanje: novo, največja dovoljena obremenitev: 33.975 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Lowbed Trailer NEW | 9.3 m Loading Platform | Ramps | approx. 34 t Payload | from €56,600 New vehicle – individually configurable for your application. Robust lowbed trailer with a dropped loading deck and high-performance ramp system for professional transport of construction machinery, vehicles, and heavy equipment. Engineered for high payload, long service life, and reliable use on job sites. -- Highlights -- • Approx. 33,975 kg payload • Dropped loading platform with rear bevel • Hydraulic, sliding steel ramps • Ramp load capacity up to 40,000 kg per pair • Drawbar version with turntable • High-strength steel construction • BPW axles with air suspension • EBS brake system -- Technical Specifications -- • Gross weight: 42,000 kg • Tare weight: approx. 8,025 kg (±3%) • Payload: approx. 33,975 kg • Loading platform length: 9,300 mm • Overall width: 2,540 mm • Loading height at max. load: approx. 860 mm • Axle spacing: 1,360 mm • Max. speed: 80 km/h -- Standard Features -- • Dropped loading platform with approx. 48 mm hardwood flooring • Checkered plate over axles Cpjdpfx Aboypazljvjw • Multiple lashing points up to LC 10,000 daN • Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm) • Hydraulic ramp lifting system • High-strength fine-grained steels S355 / S690 • BPW axles, air suspension, drum brakes • EBS braking system (2S/2M) with spiral cable • ASPÖCK NORDIK LED lighting -- Included Options / Equipment -- • Turntable with approx. 1,750 mm long drawbar and 50 mm towing eye • Coupling height loaded: approx. 630–810 mm • Electro-hydraulic unit at rear under loading platform • Tire pressure monitoring system TPMS (ECE R141) • Cover plates between ramps and loading platform • Ramp control valves on right-hand side • Galvanized support legs under rear bevel • Rear LED rotating beacon bracket • Extendable warning panels with LED • Reflective tape in accordance with EU regulations • Additional license plate bracket rear right Further features and individual customization available on request – we configure your trailer to your exact requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2014, Oprema: ABS, *SAF kolutne zavore *Zračno vzmetenje *Dvižno-spustni ventil *Zaboj za 32 palet s pokrivno ponjavo *Dvojni nosilec za rezervno kolo *Orodjarna *Adapter omarica 2x7-polno in 1x15-polno Cpjdpoypa Edjfx Abvow *3-vrstne aluminijaste letve *Stranska drsna ponjava *Drsna streha Vse informacije brez garancije!

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, New vehicle / Stock vehicle / Incoming? Also available with individual configuration / from €38,600,-- For sale is a Wielton box semi-trailer, designed for professional use in general cargo, pallet, and distribution transport. Note: The following equipment describes a current stock or pre-ordered vehicle. Variations depending on the specific vehicle, production status, or individual customer configuration are possible. ----Chassis / Frame 19 pairs of lashing rings ----Axles and Running Gear 3 axles, each with a 9,000 kg load capacity * SAF axles with air suspension and disc brakes (ET120) * Brake discs Ø 430 mm * 1st axle as a lift axle * 2 mechanical landing gears, brand SAF ----Chassis Accessories Large roller-type impact buffers mounted on rear frame * 2 large PVC toolboxes, 165 l each, located behind the unit * Rear underrun protection made of steel, compliant with ECE * PVC quarter mudguards with antispray system * Spare wheel holder ----Braking System Dual-line compressed air brake system, WABCO, ADR-compliant * Steel air tanks for brake system and air supply ----Lighting and Electrics Multi-chamber multifunctional taillights Aspöck ECO LED, full LED * 2 × 7-pin + 1 × 15-pin socket, front * EBS socket ----Wheels and Tyres 6 × 385/65 R 22.5 tyres * 6 × steel rims 11.75 × 22.5, ET120 * 6 × premium BRIDGESTONE tyres * Protective caps for wheel nuts ----Floor All-round fully sealed flooring * Floor end plate, 270 mm deep, over entire vehicle width in the rear area * Forklift suitable up to 7,500 kg axle load ----Body Box body made of 20 mm plywood sandwich panels with metal exterior layers * Aluminium corner posts, bonded and bolted Cpjdpfx Aoypa Eqobvow * Lightweight insulated roof structure * Internal front wall reinforcement made of plywood, 1,400 mm high * 1 row of load securing rails on both sides at 1,200 mm height * Double-deck rails including support beams * 1 A5 document box * Side underrun protection, 260 mm high * Rear twin hinged doors with 2 internal locking rods each ----Documents Load securing certificate according to VDI 2700 / DIN EN 12642 XL * Document container on front wall, DIN A4 * Operating manual in German / English ----Additional Systems TPMS tyre pressure monitoring * Sensor on each wheel * Warning light on chassis frame * CAN bus signal to tractor unit * Control line for lift axle from cab ----Further equipment and individual adaptations possible at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, WEB Trailer WF/W-18 NEW ? Swap Body Trailer | for €19,500!!! New vehicle – customizable to your application. Swap body trailer for symmetrical swap bodies from 7,150 to 7,450 mm. Low center of gravity, air-suspended chassis, and hot-dip galvanized frame for professional distribution and swap traffic. Cpodsypa Hnjpfx Abvew ----Highlights • Swap body chassis for 7,150–7,450 mm • 18 t axle load (2 × 9 t) • Very low ride height • 2 outriggers + 4 retractable twist-locks (20 t) • Air-suspended bogie with low-maintenance ball bearing slewing ring • Extensible drawbar • Hot-dip galvanized chassis for maximum corrosion protection ----Technical Data • Unladen ride height: approx. 1,050 mm • Unladen coupling height: approx. 720 mm • Parking height: approx. 1,020 – 1,320 mm • Underrun clearance: approx. 1,000 mm • Axle loads: 18,000 kg (2 × 9,000 kg) • Spring center distance: approx. 1,300 mm • Drawbar pivot angle: ±3° • Tires: 445/45 R19.5 ----Standard Equipment • Chassis for swap bodies 7,150–7,450 mm • Folding & adjustable front stop • Air suspension bogie incl. ball bearing slewing ring (90 mm) • Height adjustment via tension springs • Extensible drawbar (stepless, approx. 600 mm) • Tow eye Ø 40 mm (for turntable trailers) • EBS brake system (Knorr or WABCO) incl. Roll Stability Program • Lift and lower device, left side in direction of travel • Steel air tanks, painted • Side underrun protection on both sides • LED lighting system 24 V with multifunction lights ----Included Options • Hot-dip galvanized chassis (without top coat) • Hot-dip galvanized drawbar (as per customer spec) • Preparation for electronic spare wheel holder (winch design) • Free choice of axle brand (SAF / BPW / JOST) • Brand tires 445/45 R19.5 M+S • Lamp bracket painted RAL 9016 Traffic White • Wheels painted aluminum/silver (similar to RAL 9006) • Lane departure and side marker lights in LED • COC papers by System Trailers ----Additional Equipment and Customization Further equipment and individual configurations available at any time – we configure your vehicle precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 28.620 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.610 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.030 mm, skupna širina: 2.550 mm, skupna višina: 4.020 mm, Oprema: ABS, SCAM Semi-Trailer NEW – Highly Versatile | from €45,000 Brand new vehicle – fully customizable to your specific application. Robust SCAM quality designed for daily transport operations, engineered for high payload, durability, and efficiency. Ideal as a base chassis for a wide range of bodies and transport solutions. Cedsypa I Ejpfx Abvepw --- Highlights --- - High-strength chassis for demanding applications - High payload with optimized tare weight - Proven brand components (axles, brakes, electrics) - Versatile and fully configurable --- Technical Specifications (3-Axle Version) --- - Axle load: up to 9,000 kg per axle - Air suspension with lifting/lowering function - Gross vehicle weight: up to 39,000 kg (depending on configuration) - Fifth wheel coupling according to EU standards (Dimensions and weights depend on configuration) --- Standard Equipment --- - High-tensile steel frame in SCAM design - Air-suspended chassis - EBS braking system in line with EU regulations - LED lighting system - Heavy-duty mechanical landing legs - Side underrun protection and rear underrun protection --- Included Options --- - Spare wheel holder - Wheel chocks with holder - Lift/lower valve - Prepared for various body types - Custom paintwork available in RAL colors --- Additional equipment and bespoke solutions available on request – we configure your vehicle exactly to your requirements. Sample photo. Actual equipment may vary depending on configuration.