Čelni viličar

Still RX 60-80 900

Stanje: novo, številka stroja/vozila: 12969, Leto izdelave: 2022, obratovalne ure: 404 h, nosilnost: 8.000 kg, dvižna višina: 5.450 mm, prosto dvigovanje: 1.870 mm, težišče tovora: 900 mm, gradbena višina: 3.220 mm, velikost sprednje pnevmatike: 300-15, velikost zadnje pnevmatike: 28x12,5-15, skupna masa: 14.400 kg, Pridržana pravica do sprememb in prodaje medtem. Hsdpfx Aow Ayu Tjmusnu

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,700 mm long, with hydraulically foldable and lowerable rear section as well as hydraulically liftable front section for driving onto the gooseneck Axles and tyres: - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - 235/75 R 17.5 3PMSF twin tyres - TPMS tyre pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electrohydraulic auxiliary steering for the self-steering axle of a 3-axle unit - Automatic control of the self-steering axle when reversing via gyroscope sensor - Manual steering operation in forward and reverse using separate radio remote control - Manual operation enabled up to 10 km/h - System powered by separate electro-hydraulic unit Accessories included: - Removable steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power pack - External beams on gooseneck with mounting holes for bolted lashing rings - First mounting hole approx. 200 mm from front, then approx. every 400 mm - One mounting hole at upper rear of external gooseneck beams for a bolted lashing ring - Grating cover with 5 mm sheet reinforcement on gooseneck and rear taper - 2" king pin - Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide - Round NATO socket at front connection bar (Maeler & Kaege VG 96 917) - 1 pair of removable side aluminium drop sides on gooseneck, approx. 400 mm high, anodized - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller - Winch installed at the front inside the gooseneck - Continuous grating cover with 5 mm steel underlay for additional reinforcement, designed for point loads: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted-on sand coating on the gooseneck covering plates and in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, load capacity while driving in raised position: 9,000 kg - Hydraulic cylinders are fitted with load-holding valves - Cut-outs in the outer frame of the loading platform and lift bed for attaching tension straps - Extensive lashing positions - Hydraulically lowerable rear section for loading and unloading, can be raised to shorten total coupling length - Load capacity while driving in horizontal position: 10,000 kg - Shortening of total coupling length when raised: 2,350 mm - Painted-on sand coating on the complete ramp, except for the extendable galvanized part of the ramp Hnjdpeyw Sakefx Amuju - Hydraulically extendable rear extensions for loading and unloading - Radio remote control: - Control of hydraulic lift bed - Control of hydraulic lifting of rear extension - Control of hydraulic extension of rear extension - 1st axle with starting aid - Centralized lubrication system with 1 pump - 4 warning signs, approx. 423 x 423 mm, extendable

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 15.255 h, nosilnost: 7.000 kg, dvižna višina: 4.300 mm, vrsta goriva: električni, gradbena višina: 3.020 mm, stanje pnevmatik: 50 odstotek, velikost sprednje pnevmatike: 355 65-15 nicht kreidend, velikost zadnje pnevmatike: 8.25-15 nicht kreidend, lastna masa: 10.284 kg, skupna dolžina: 3.720 mm, barva: drugo, Anbaugeräte: Seitenschieber, Zinkenverstellgerät, Anbaugerätebeschreibung: Zinkenverstellgerät Öffnungsbereich: 495 / 1465 mm Sonderausstattung: Heizung, Vollkabine, Beschreibung: Wir haben neben diesem Kalmar Modell noch ca. 200 Schwerlaststapler, Kompaktstapler, Gabelstapler & Seitenstapler in unserem Lager Hamburg und Danzig. Besuchen Sie unsere Homepage - Mietkauf & Finanzierung zu günstigen Konditionen sind für uns jederzeit machbar. Gerne kaufen wir auch Ihren Gebrauchten frei an, auch ohne dass Sie ein Fahrzeug bei uns erwerben. Unser Inhaber Herr Peter Sawitzki berät Sie gerne ausführlich zu diesem ECF 70-6 P.S.: Unsere Stapler-Meisterwerkstatt ist auf Reparatur, Instandsetzung, Überholung und Sonderbau für Gabelstapler ab 8 to. spezialisiert. Gerne stellen wir auch Ihr Fahrzeug bei uns zum Kommissionsverkauf aus. Hnedpferfdmxsx Amusu

Stanje: novo, Leto izdelave: 2025, nosilnost: 2.500 kg, dvižna višina: 4.700 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.240 mm, moč: 16 kW (21,75 KM), stanje pnevmatik: 50 odstotek, lastna masa: 4.736 kg, skupna dolžina: 2.280 mm, barva: drugo, Posebna oprema: 3. ventil, 4. ventil, delovne luči zadaj, delovne luči spredaj, polkabin, CE certifikat, tehtnica, varnostna luč, nepuščajoče pnevmatike, brisalec, LED, sedež. Opis posebne opreme: - Blue Spot spredaj/zadaj - Zunanji dvižni cilindri - Elektronska ročna zavora - Upravljanje Fingertip - Velik zaslon na dotik - Kamera za vzvratno vožnjo Hnjdpfx Aexz Hp Eomuju