Drugi

Ashita AG3-70 Notstromaggregat 70kVA NEU

Stanje: novo, največja dovoljena obremenitev: 48.180 kg, skupna masa: 70.700 kg, konfiguracija osi: 3 osi, skupna širina: 2.750 mm, Oprema: ABS, You can find our entire vehicle inventory, including vehicles available immediately and at short notice, on our website. Ibodewx Ddwjpfx Ab Uef Excerpt from the equipment list. Complete specifications available on request. GOOSENECK * Gooseneck with integrated 1-axle running gear (pendulum axle) in a detachable design * Gooseneck hydraulically adjustable in height, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front taper approx. 60° * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, tapered design * 1 pair of mechanical supports at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized version * 1 plug-in aluminum rear board, approx. 400 mm high, anodized version * Checker plate covering over the gooseneck * 3.5 inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the right side in direction of travel near the aluminium board, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic couplings from gooseneck to low bed with multi-coupling * 1 LED work light left and right at the rear cross member of the gooseneck, wired to the connection panel for the tractor unit LOADING AREA * Low-bed with external beams, designed as a telescopic loading area in low construction with front extension, including fixed approx. 50 mm thick hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking position approx. every 1,000 mm on the extension * Fixed drive-on wedges at the front of the loading area with climbing strips * 1 lashing ring outside on the fixed drive-on wedges (LC 10,000 daN) * 1 hanging lashing ring each left and right on the front crossmember (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the inner beams of the low bed * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the outer beams of the low bed (LC 10,000 daN) * Cut-outs above the lashing rings on the top chord of the outer beams * Mechanical bolt-flange coupling from low bed to chassis, for exchanging the loading platform or adding extension beams, with electro-pneumatic-hydraulic couplings * Outer beams of the low bed feature a painted-on sand layer as anti-slip protection * 4 pairs of recessed lashing rings flush in the loading area, distributed along the outer frame/outer beams (LC 10,000 daN) * 1 lashing ring outside each left and right on the rear crossmember (LC 10,000 daN) * Folding extensions, approx. 230 mm per side * Loose extension planks, framed in steel * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam, for mounting boltable rings M24 (LC 8,000 daN) * 2 pairs of M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR * Rear chassis with closed outer frame, checker plate covering and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear PENDULUM AXLE * All axles are hydro-mechanically force-steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and safety pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in DB 7350 Nova Grey * Hydraulic axle compensation * Tyres 245/70 R 17.5 3PMSF * Hanging bar for loose loading ramps at the

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: zelen, Leto izdelave: 2013, Empty weight: 25,200 kg Payload: 60,300 kg Gross vehicle weight (GVW): 85,500 kg Iedpfx Abewhl Sbe Usbf

Stanje: novo, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 1.350 mm, višina nakladalnega prostora: 450 mm, barva: rdeča, Leto izdelave: 2024, Colour: Red Hersteller: Goldhofer Typ: Raupenauflage / Spinebed BB 450 A Fahrgestellnummer: 2100788 Baujahr: 2024 – NEU / unbenutzt Allgemeines Ausziehbar von 8.000 mm bis 13.000 mm Tragfähigkeitsklasse 100 t / 120 t in Kombination 4+6 Bauhöhe 450 mm; Länge 8.000 mm, Breite 1.350 mm Ausziehbar in 500-mm-Schritten Heckseitige Laschenkupplung zur Verbindung mit THP-Fahrwerken Frontseitige Klauenkupplungen für den Anschluss von Schwanenhals oder Klauenkupplungsadapter Integrierte Versorgungsleitungen für Hydraulik, Bremse und Elektrik mit Anschlusskupplungen Eigengewicht ca. 14.400 kg Ladungssicherung Iedpfxjvnb Nwo Ab Uobf 1 Paar Zurrösen (LC = 30.000 daN) im hinteren Kupplungskopf 8 Paare Zurrösen (LC = 20.000 daN) außen am Außenholm angeordnet Seitliche Verbreiterungen Ausschwenkbare Rungenträger und Einlagen am Außenholm (Basislänge) Ausschwenkbare Seitenverbreiterungen und Matratzen im Innenrohr 1 x Schnellkupplungsadapter THP/SL Zur Verbindung der Kupplungskrallen eines Decks mit den Laschen von Modulfahrwerken oder eines Schwanenhalses Eigengewicht 1.600 kg 1 x Auffahrkeil für Baggerauflage in Stahlausführung (4 Stück) Gewicht 360 kg = Further information = General information Year of manufacture: 2024 Weights Unladen weight: 14,400 kg Payload: 120,000 kg Gross vehicle weight: 134,400 kg Functional Load height: 45 cm Extendable structure: Yes Condition General condition: Very good Technical condition: Very good Optical condition: Very good Financial information Price: On request Further information Please contact Stefan Schaapveld for further information.