Os

BPW HSF 12010 ECO-P TRAILER AXLE DRUM.

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Hnjdpfx Amel Sl Izeueu Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket Hodpfx Amstphtmjuenu A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: novo, konfiguracija osi: > 3 osi, dovoljena osna obremenitev (os 1): 45 kg, dovoljena osna obremenitev (os 2): 45 kg, dovoljena osna obremenitev (os 3): 45 kg, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 1.170 mm, skupna širina: 3.000 mm, skupna višina: 1.170 mm, vzmetenje: hidravlika, velikost pnevmatike: 215/75R17.5, medosna razdalja: 1.500 mm, barva: rdeča, Leto izdelave: 2026, Hauptmerkmale Baujahr: Neu Universal-Sattelhals SH 35/2 Ladeplattform: 3.700 mm x 2.440 mm 3,5-Zoll-Königszapfen Hydraulische Hub- und Senkvorrichtung Hydraulische Stützzylinder Kupplungshöhe: 1.450 mm Integrierte Zurrkupplung Zurrösen Reserverad + Reserveradhalter Hydraulischer Verriegelungsbolzen Automatische Gooseneck-Schmierung mit Pumpe, Beka-MAX Hatz Diesel PPU Hatz 1-Zylinder-Dieselmotor (Silent Pack) mit 9,6 kW 240-Liter-Hydrauliköltank, pulverbeschichtet Leistung: 35 l/min, maximaler Arbeitsdruck: 250 bar 3x verschiedene Schnellkupplungsgrößen für Druckanschluss 3x verschiedene Schnellkupplungsgrößen für Tankanschluss Elektronische Drehzahlregelung THP SL 3 Maximale Achslast: 45.000 kg pro Achse Gesamte Achslast: 3 x 45.000 kg = 135.000 kg ZG-Gesamtgewicht: 135.000 kg Leergewicht: 10.650 kg Nutzlast: 124.350 kg Gesamtlänge: 4.500 mm Ladeflächenbreite: 3.000 mm Höhe: 1.175 mm (+/- 300) THP SL 4 Maximale Achslast: 45.000 kg pro Achse Gesamte Achslast: 4 x 45.000 kg = 180.000 kg ZG-Gesamtgewicht: 180.000 kg Leergewicht: 13.850 kg Nutzlast: 166.150 kg Gesamtlänge: 6.000 mm Ladeflächenbreite: 3.000 mm Höhe: 1.175 mm (+/- 300) THP SL 5 Maximale Achslast: 45.000 kg pro Achse Gesamte Achslast: 5 x 45.000 kg = 225.000 kg ZG-Gesamtgewicht: 225.000 kg Leergewicht: 17.250 kg Nutzlast: 207.750 kg Gesamtlänge: 7.500 mm Ladeflächenbreite: 3.000 mm Höhe: 1.175 mm (+/- 300) Hnjdpox S Evbefx Amuou THP SL 6 Maximale Achslast: 45.000 kg pro Achse Gesamte Achslast: 6 x 45.000 kg = 270.000 kg ZG-Gesamtgewicht: 270.000 kg Leergewicht: 19.800 kg Nutzlast: 250.200 kg Gesamtlänge: 9.000 mm Ladeflächenbreite: 3.000 mm Höhe: 1.175 mm (+/- 300) Tiefbett FB 300 - 10.000 mm, ohne mechanische Kupplung, nicht befahrbar - Nutzlastklassifizierung in Kombination (6+6): 300 t - Höhe 300 mm, Länge 10.000 mm, Breite 2.990 mm - Kupplungsköpfe vorne und hinten für modulare Verbindung - Fahrwerke für modulares Fahrwerk - Eigengewicht ca. 21.300 kg - Inkl. hydraulischem Verriegelungsbolzen zur längsseitigen Verbindung modularer Fahrwerke 1 x Tiefbett FB 250 - 8.000 mm, mit mechanischer Kupplung, nicht befahrbar - Nutzlastklassifizierung in Kombination (6+6): 170.000 kg - Höhe 250 mm, Länge 8.000 mm, Breite 2.990 mm - Kupplungsköpfe vorne und hinten für modulare Verbindung - 1x Verlängerung für Tiefbett, 4.000 mm - 1x Verlängerung für Tiefbett, 5.000 mm Allgemeine Informationen Baujahr: 2026 Achskonfiguration Reifengröße: 215/75R17.5 Achshersteller: BPW Eco Plus Federung: hydraulische Federung Mittelachse 1: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 2: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 3: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 4: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 5: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 6: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Funktionalität Ladeflächenhöhe: 117 cm Ausziehbarer Aufbau: Ja Zustand Allgemeiner Zustand: sehr gut Technischer Zustand: sehr gut Optischer Zustand: sehr gut Schäden: keine Finanzielle Informationen...

Stanje: rabljeno, prevoženi kilometri: 90.000 km, moč: 96 kW (130,52 KM), število postelj: 5, vrsta goriva: dizel, vrsta prenosa: mehanski, barva: bela, prva registracija: 04/2015, skupna dolžina: 6.630 mm, skupna širina: 2.330 mm, skupna višina: 3.100 mm, skupna masa: 3.495 kg, Leto izdelave: 2015, Oprema: centralno zaklepanje, kopalnica, navigacijski sistem, * Motor/podvozje: Fiat Ducato 2,0 MJET * Moč: 96 kW / 131 KM * Prenos: ročni menjalnik Hedpfjzzu Nyox Amuenu * Prevoženi kilometri: 90000 km * Dovoljena skupna masa: 3495 kg * Postelja(e): dvižna postelja, nadstropna postelja ----POSEBNA OPREMA: * Osnovni paket (panoramski strešni ventilator (Midi Heki), obloga kopalnice, mini Heki namesto strešne odprtine MPK, lesena rešetka za tuš, garderoba, voznikov sedež (Captain Chair), prevleka za voznikov sedež (Captain Chair) v barvi notranjosti, obešalnik za oblačila v kopalnici, 2. vtičnica v zgornji omari nad kuhinjskim blokom, LED notranja luč) * Markiza Omnistor 5003 – 3,5 m * Priklopna naprava * Povratna kamera (nova) * Navigacijska naprava Xzen X-F275 (nova) * Satelitska antena, vključno z 22-palčnim televizorjem (nova) ---- ----Pridržujemo si pravico do sprememb, medprodaje in napak! ----ustvarjeno s SYSCARA