Nizki nakladalnik

Faymonville 3-assige Euro Dieplader Gooseneck

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: Iodpjk Af Svsfx Akajig - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 07/2016, vzmetenje: zrak, Leto izdelave: 2016, Oprema: dvižna zadnja plošča, Vzmetenje: zračno vzmetenje Zadnja os 1: krmiljena Zadnja os 2: krmiljena Zadnja os 3: krmiljena Največja dovoljena masa: 48.000 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Cena: na zahtevo Iiodpfx Aovvwzrekasg Za več informacij se obrnite na Davida F Middelmana.

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram Iodpfx Ael Ux Rwekajig - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.200 kg, največja dovoljena obremenitev: 29.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: bela, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, polprikolica De Angelis, nova, z rampon, takoj na voljo, razen če je že prodana, 3 osi s pnevmatičnim vzmetenjem, 3. os je vodljiva, sistem EBS, tovorna površina dolžine 10 m, višina od tal 85 cm, dvojne elektrohidravlične rampe z dvojnim batom za popolno odpiranje, rampe so nastavljive po širini, rampe so vroče pocinkane, par stranskih kavljev Rud in nosilci, talna obloga iz jeklene pločevine in lesa, 12 pnevmatik 245.70 R 17.5, stranske ograje iz aluminija, garancija proizvajalca, POOBLAŠČENI TRGOVEC INTERDRIVE SRL-PARMA. Isdpfx Akjznm Tqoaoig

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Iisdpfxji Ri Hro Akasg Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WKVDAS00300129422, lastna masa: 9.882 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 845 mm, skupna dolžina: 13.190 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, NOVO, ŠE NI REGISTRIRAN Prikolica s hidravličnimi rampami BPW osi, nosilnost 10 t Iedezcqgfopfx Akaoig 1. os dvižna, 3. os krmiljena Skupna dolžina: 13.190 mm Dolžina nakladalne površine: 9.240 mm Višina nakladalne površine od tal: 845 mm Hidravlične rampe 40 t s pomikom Stranske razširitve Sidrni kavlji Rezervno kolo Lastna teža: 9.880 kg

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel Iiedpfx Asx Efzuskaog - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 9.998 kg, prva registracija: 09/2018, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, skupna višina: 3.800 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: zelen, Leto izdelave: 2018, = Dodatne možnosti in dodatna oprema = - Zračna vzmetenje - Centralno podmazovanje = Opombe = Meusburger MTS-3. Letnik: 2018. 10-tonske osi BPW. Lastna teža: 13.300 kg. Nosilnost: 28.200 kg. Skupna teža: 41.500 kg. Nosilnost sedla: 11.500 kg. Prisilno krmiljenje (3 krmiljene osi). Zračna vzmetenje. Hidravlična 2-točkovna podpora na zadnji strani. Rebrasto dno. Hidravlična naložna rampa od nizke platforme do podaljška. - Dolžina: 3500 mm. Vinska vitla z daljinskim upravljanjem. Daljinsko upravljanje za krmiljene osi, rampe, naložno rampo in podpore. Orodjarni predali. EBS, ABS, ALB. Hidravlične 2-delne rampe: - Dolžina: 2900 + 1700 mm. - Hidravlični stranski premik (levo/desno). 1. os kot dvižna os. Hidravlično napajanje prek vtičnice NATO na vlečnem vozilu. Dimenzije: Podaljšek: D: 3800 mm. Š: 2500 mm. V: 1400 mm. Višina sedla: 1150 mm. Tovor: D: 10.500 mm. Š: 2550 mm. V: 950 mm. Pnevmatike: 235/75R17,5 (Globina profila 30–80 %). Nemška prikolica! Dimenzije prikolice: D: 13.900 mm. Š: 2550 mm. V: 3800 mm. ID št.: 639. Ijdpfx Ajzq Actskajig Za vse oglase, ponudbe in cenitve Heinhuis ter za vse pogodbe, ki jih je sklenil Heinhuis, in za pogovore, ki so jim predhodili, veljajo splošni pogoji poslovanja Heinhuis. Z vsako obliko stika potrjujete veljavnost splošnih pogojev poslovanja Heinhuis in izjavljate, da ste seznanjeni s temi pogoji. Naše cene so neto cene za izvoz. = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 235/75R17,5 Znamka osi: BPW Vzmetenje: Zračna vzmetenje Zadnja os 1: Dvojna pnevmatika; Dvižna os; Maks. obremenitev osi: 10000 kg; Krmiljena; Globina profila pnevmatike levo notranji: 80 %; Globina profila pnevmatike levo zunanji: 80 %; Globina profila pnevmatike desno notranji: 80 %; Globina profila pnevmatike desno zunanji: 40 % Zadnja os 2: Dvojna pnevmatika; Maks. obremenitev osi: 10000 kg; Krmiljena; Globina profila pnevmatike levo notranji: 80 %; Globina profila pnevmatike levo zunanji: 80 %; Globina profila pnevmatike desno notranji: 80 %; Globina profila pnevmatike desno zunanji: 80 % Zadnja os 3: Dvojna pnevmatika; Maks. obremenitev osi: 9998 kg; Krmiljena; Globina profila pnevmatike levo notranji: 80 %; Globina profila pnevmatike levo zunanji: 80 %; Globina profila pnevmatike desno notranji: 30 %; Globina profila pnevmatike desno zunanji: 30 % Teže Lastna teža: 13.300 kg Nosilnost: 28.200 kg Skupna teža: 41.500 kg Funkcionalnost Višina tovorne površine: 95 cm Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro Poškodbe: nobene = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2015, = Dodatne možnosti in dodatna oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj - Centralno mazanje Iijdpszq Rg Hofx Akaog = Opombe = GOVORIM PO RUSKO - Yuriy, mobilna številka: 3-osni nizkopodvozni priklopnik, ki ga je mogoče prevoziti. Priklopna platforma, približno 3.900 x 2.550 mm, z aluminijastimi stranskimi stenami, nizkopodvozna platforma, približno 9.050 x 2.550 mm, 4 vdolbinice za kolesa z izvlečnimi deli, vdolbinice spredaj, približno 390 mm, zadaj, približno 290 mm, medosna razdalja, približno 3.100 mm, nosilec za roko bagra. Višina nakladanja, približno 900 mm. 34 pritrdilnih točk, zložljive razširitve na 3.000 mm, opozorilni paket za presežne dimenzije. Hidravlične rampe, dvodelne, približno 4.300 x 720 mm, z gumijasto oblogo, hidravlično premikljive, BPW osi, 3 osi, hidravlično prisilno krmiljenje, vključno z daljinskim upravljalnikom, EBS, zračno vzmetenje, dvižna os. Dovoljena skupna masa 48.000 kg, masa na priklopno glavo 18.000 kg, nosilnost 35.350 kg. Kraljevski vijak 2 palca, višina priklopne glave, približno 1.250 mm. Orodjarna na priklopni platformi. Pnevmatike 235-75R17.5. Dvojni zračni sistem, hidravlična črpalka. Centralno mazanje. Barva: MB 5361, encijan modra. Tehnični pregled veljaven do 07-2027. = Dodatne informacije = Lastna masa: 12.650 kg Nosilnost: 35.350 kg Dovoljena skupna masa (zGG): 48.000 kg Pnevmatike spredaj: 235-75R17.5 Pnevmatike zadaj: 235-75R17.5 Država proizvodnje: DE Za dodatne informacije se obrnite na Jana-Marca Schwickerta.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 09/2019, dolžina tovornega prostora: 18.320 mm, širina tovornega prostora: 2.530 mm, višina nakladalnega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2019, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - BPW osi - EBS - Dvigalna os - Zračna vzmetenje - Rezervno kolo - Bobnaste zavore - Centralno podmazovanje = Opombe = Iedpfezcy R Hsx Akajig 09/2019 BROSHUIS 3ABSD, 3-osni nizkopodsredni prikolici z ABS/EBS, dovoljena skupna masa: 59.000 kg, vrat z nosilnostjo prikolice 23.000 kg, hidravlično krmiljenje na 2. in 3. osi, dvigalna os na 1. osi, hidravlične rampe (2-delne, dolžina: 310 + 190 cm, širina: 91 cm, nagibni kot 8°, nastavitev širine), hidravlična dvižna ploščad, hidravlične zadnje podpore, električni vitel (8.165 kg s 27,4 m jeklene žice in kavlja), višina tovorne površine: 92,5 cm, 2 para vzdolžnih žepov, podpore za razširitev, različne pritrdilne točke in vzdolžni žepi, BPW Eco Plus osi z bobnastimi zavorami in dvojnimi pnevmatikami z 245/70-R17.5 pnevmatikami (profil levo: 7/8, 10/7, 6/8 mm; profil desno: 7/10, 10/11, 9/9 mm), prazna masa: 15.860 kg, dovoljena skupna masa: 59.000 kg, nizozemska registracija z veljavnim tehničnim pregledom (APK) do 08.10.2026 = Dodatne informacije = Konfiguracija osi Zadnja os 1: Dvigalna os; Maks. obremenitev osi: 9000 kg Zadnja os 2: Maks. obremenitev osi: 9000 kg Zadnja os 3: Maks. obremenitev osi: 9000 kg Mase Prazna masa: 15.860 kg Nosilnost: 43.140 kg Dovoljena skupna masa: 59.000 kg Funkcionalnost Znamka nadgradnje: Brosuis 3ABSD Višina tovorne površine: 91 cm Razširljiva nadgradnja: Da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Identifikacija Registrska tablica: OX-77-HF Dodatne informacije Za več informacij se obrnite na Arneja Honingha.