Drugo

SENNEBOGEN 630 Seilbagger 2007 30m. + Ausleger 7,5m

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high Prjdpfxek Af Sve Aphsa - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) Prjdjrgzv Njpfx Aphea * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: rabljeno, moč: 74,5 kW (101,29 KM), vrsta goriva: dizel, barva: rdeča, dvižna moč: 4 kg/m, dvižna višina: 14.000 mm, velikost pnevmatike: 15.5 / 80 - 24, stanje pnevmatik: 98 odstotek, tip droga: teleskopski, Leto izdelave: 2007, obratovalne ure: 1.048 h, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1440 SLT ULTRA TURBO Series III-E2 - 4x4x4, first delivered: 2008, LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m, LONG FORKS – QUICK COUPLER, AUXILIARY HYDRAULICS, LOAD PROTECTION GUARD, 4-cylinder PERKINS TURBO diesel engine (101.32 hp / 74.50 kW at 2,200 rpm), RADIO REMOTE CONTROL, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic outriggers (2x / WIDE DESIGN), SIDE SHIFT - LEVELLING, OVERLOAD PROTECTION DEVICE, spacious cab (coloured glass), comfort seat, ROPS / FOPS, road lighting, WORK LIGHTS (front/rear), WARNING BEACON, exterior mirrors (2x), windscreen wipers (2x), heating / ventilation, trailer coupling, lashing and transport points. Tyres: BKT OFF-ROAD TYRES (15.5/80 – 24) – approx. 98% all round. Transport dimensions: Length: approx. 7,290 mm (approx. 5,930 mm without forks), width: approx. 2,440 mm, height: approx. 2,560 mm. Price is net export; for domestic sales, VAT applies. Financing possible / low-cost worldwide transport / for export sales, only the net price is payable. Prodpfjuiyqdox Aphja

Stanje: novo, največja dovoljena obremenitev: 65.400 kg, skupna masa: 93.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Pos. 1: Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data apply only when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights at speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Gross vehicle weight rating: 94,000 kg Curb weight: approx. 29,600 kg Pjdpfxowg N N Ij Aphsra Payload: approx. 64,400 kg (depending on load diagram / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Overall length of combination: 24,165 mm Vehicle width: — Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Articulation radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front bogie Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: counter-steered Flatbed 14,400 mm (external beams), single telescopic with separating point Length x width: 7,000 mm x 2,750 mm Telescopic extension by / to max. 3,400 mm / 10,400 mm Deck height: 300 mm Plus 4,000 mm extension beam included Loaded loading height: approx. 450 mm 4-axle rear bogie Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 16.300 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2018, vzmetenje: drugo, velikost pnevmatike: 205/65 R 17,5, barva: zelen, Oprema: ABS, EBS (Elektronski zavorni sistem), - 5 osi: 1. os vodena s trenjem in dvižna; 2.-5. os hidravlično vodene - Raztegljivo: 6.200 mm (skupna dolžina: 12.800 mm - 19.000 mm) - SAF osi - Premične hidravlične dvojne rampe z nosilnimi nogami - Dvižni in spustni sistem - Bobnaste zavore - Vzmetenje: zračno-lift Prsdpeymnmwjfx Aphea Pridržujemo si pravico do napak

Stanje: zelo dobro (rabljeno), prva registracija: 08/2008, barva: zelen, Leto izdelave: 2008, Izvlečna nadgradnja: da Tehnično stanje: zelo dobro Optično stanje: zelo dobro Prsdjykz Uispfx Aphsa

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 11.200 kg, dovoljena osna obremenitev (os 2): 11.200 kg, dovoljena osna obremenitev (os 3): 11.200 kg, dolžina tovornega prostora: 14.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, skupna dolžina: 14.600 mm, skupna širina: 2.550 mm, skupna višina: 880 mm, vzmetenje: zrak, velikost pnevmatike: 245 / 70 R17.5, barva: modra, Leto izdelave: 2008, Oprema: dvižna zadnja plošča, Color: Blue Loading capacity: 72,600 kg Loading floor height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Model: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights / Loading Capacity King pin load: 26,000 kg Axle load: 11,200 kg Total axle load: 6 x 11,200 kg = 67,200 kg Gross vehicle weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload: 72,600 kg Axles Axle make: BPW Air suspension 1st axle fixed Axles 2–6 hydraulic steering Axles 1 & 2 liftable High/low valve WABCO braking system Tyres: 245/70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Maximum extended length: 21,800 mm Loading width: 2,550 mm Height: approx. 885 mm – 925 mm King pin height: +/- 1,350 mm Additional information • Operated via truck PTO • Lashing rings • Stake pockets • Partially wooden loading deck • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • 3.5" king pin • Central lubrication • Oversize load marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = Further information = General information Year of manufacture: 2008 Axle configuration Tyre size: 245/70 R17.5 Axle brand: BPW Eco Suspension: Air suspension Rear axle 1: twin tyres, lift axle, max. axle load 11,200 kg Rear axle 2: twin tyres, lift axle, max. axle load 11,200 kg, steered Rear axle 3: twin tyres, max. axle load 11,200 kg, steered Rear axle 4: twin tyres, max. axle load 11,200 kg, steered Rear axle 5: twin tyres, max. axle load 11,200 kg, steered Rear axle 6: twin tyres, max. axle load 11,200 kg, steered Weights Unladen weight: 20,600 kg Payload: 72,600 kg GVW: 93,200 kg Functional Prjdpfx Apox R Undshea Superstructure make: WABCO Loading platform height: 88 cm Extendable superstructure: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Stanje: rabljeno, moč: 74,5 kW (101,29 KM), vrsta goriva: dizel, barva: rdeča, dvižna višina: 18.000 mm, velikost pnevmatike: 15.5 - 25, stanje pnevmatik: 98 odstotek, tip droga: teleskopski, Leto izdelave: 2011, obratovalne ure: 2.847 h, gradbena višina: 2.540 mm, dolžina vilic: 1.200 mm, širina nosilnega okvirja vilic: 1.200 mm, nosilnost: 4.000 kg, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1840 EP PRIVILEGE TURBO - 4x4x4, year of first use: 2012. Lifting capacity: 4,000 kg, maximum lifting height: 18.00 m. Equipped with radio remote control, emergency lowering system, long forks (fork length: 1,200 mm / fork carriage width: 1,200 mm), auxiliary hydraulics with hydraulic quick coupler and hydraulic side-shift. Includes load protection guard. Powered by a 4-cylinder PERKINS diesel engine (101.32 HP / 74.50 kW at 2,200 rpm), CPB, permanent four-wheel drive and all-wheel steering (4x4x4) including crab steering mode. Features hydraulic stabilizers (2x), chassis leveling system, overload warning system, spacious panoramic cab with tinted glass, ROPS/FOPS, comfort seat from GRAMMER, tow hitch, front and rear work lights, road lighting, warning beacon, reverse alarm, three windshield wipers, dual external mirrors, heating/ventilation system, and German-language operator’s manual. Fitted with BKT off-road tyres (size 15.5 – 25) with approximately 98% tread remaining. Transport dimensions: length: approx. 7,420 mm (approx. 6,100 mm without forks), width: approx. 2,400 mm, height: approx. 2,540 mm. Financing available / cost-effective worldwide transportation / for export, only the net price is payable (!). Predpfxjuiwv Rj Aphsa

Stanje: dober (rabljeno), prevoženi kilometri: 83.664 km, barva: modra, Leto izdelave: 2017, obratovalne ure: 11.908 h, Proizvajalec: Liebherr Tip: LTM 1040-2.1 Letnik: 2017 Nosilnost (t): 40 Glavni dvižni krak: 35 m Psdpfx Aey E Ig Asphjra Jib: 9,5 m Kilometri: 83.664 km Delovne ure dvigala: 11.908 h Delovne ure podvozja: 4.883 h

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 14 kg, dovoljena osna obremenitev (os 2): 14 kg, dovoljena osna obremenitev (os 3): 14 kg, dolžina tovornega prostora: 21.200 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 1.240 mm, skupna dolžina: 21.200 mm, skupna širina: 2.750 mm, skupna višina: 1.240 mm, vzmetenje: hidravlika, velikost pnevmatike: 285 / 70 R19.5 (150/148J), barva: modra, Leto izdelave: 2012, Color: Blue Payload weight: 110,550 kg Extendable Main Features Manufacturer: Goldhofer Model: THP / XLE 8 (3+5) Low Loader Chassis number: WG0THPX57B0030736 Gooseneck VIN: WG0SH0005B3030736 XLE 3 VIN: WG0XLE034B0035242 XLE 5 VIN: WG0THPX57B0030736 Year of manufacture: 2012 Weights / Load Capacity Fifth wheel load: 27,000 kg Axle load: 14,000 kg Podpfx Ajxx Sv Esphsra Total axle load: 8 x 14,000 kg = 112,000 kg Gross vehicle weight (GVW): 139,000 kg Unladen weight: 28,450 kg Payload capacity: 110,550 kg Axles BPW pendle axles Axle spacing: 1,360 mm / 1,400 mm EBS/ABS Tyres: 285 / 70 R19.5 (150/148J) Hydraulic steering and suspension Radio remote control Dimensions Overall length: 21,200 mm Loading platform length: 6,000 mm Loading floor extension: 8,500 mm Max. loading platform length: 14,500 mm Loading floor thickness: 450 mm Ground clearance loading floor: 200 mm Loading platform width: 2,750 mm / 3,250 mm Bogie width: 2,750 mm Bogie height: 1,240 mm (+/- 300 mm) Excavator trough: 700 mm Additional Equipment Hydraulic operation via truck PTO 3.5” king pin Central lubrication system Remote control operation Detachable gooseneck Hydraulic quick couplings Oversize load marker boards Working lights Amber warning beacon Ramps for loading on floor Additional tables for extending loading platform = Further Information = General Information Year of manufacture: 2012 Axle configuration Tyre size: 285 / 70 R19.5 (150/148J) Axle manufacturer: BPW Suspension: hydraulic suspension Intermediate axle 1: Twin tyres; lift axle; Max. axle load: 14 t; Steering Intermediate axle 2: Twin tyres; lift axle; Max. axle load: 14 t; Steering Intermediate axle 3: Twin tyres; lift axle; Max. axle load: 14 t; Steering Rear axle 1: Twin tyres; lift axle; Max. axle load: 14 t; Steering Rear axle 2: Twin tyres; lift axle; Max. axle load: 14 t; Steering Rear axle 3: Twin tyres; lift axle; Max. axle load: 14 t; Steering Rear axle 4: Twin tyres; lift axle; Max. axle load: 14 t; Steering Rear axle 5: Twin tyres; lift axle; Max. axle load: 14 t; Steering Weights Unladen weight: 28,450 kg Payload capacity: 110,550 kg GVW: 139,000 kg Condition Technical condition: Good Optical condition: Good Financial Information Price: On request