Valjar z enim bobnom

AMMANN ARX26

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 805 h, - EPA 1200 mm Več informacij Za več informacij kontaktirajte Kurt Meurrens, (), Kodpfxjymvvae Ag Ejdr

Stanje: novo, številka stroja/vozila: 1, lastna masa: 11.000 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2020, Oprema: ABS, New Ceylan low-loader trailer, ready for registration. 3 axles, with first axle liftable and third axle steering. Equipped with EBS, full-width double hydraulic ramps, widening devices, winch preparation, loading deck height 87 cm, loading area length 9.95 m, total length 13.65 m. RUD lashing points. Immediate delivery subject to prior sale. Warranty included. Dealer: INTERDRIVE SRL - PARMA. Kdodpfxeh S Aw Rj Ag Eer

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 860 h, - EPA Kdodpfxoymvuve Ag Esr 1200 mm Več informacij Za več informacij kontaktirajte Kurt Meurrens, (),

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 1.081 h, Za več informacij se obrnite na Kurta Meurrensa. Ksdpfx Ageyhya Nj Eodr

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram Kdsdpfxeiu Er Aj Ag Eer - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 1.103 h, Za več informacij se obrnite na Kurta Meurrensa. Kodpfx Aoyzwdvog Eodr

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 22,5 kW (30,59 KM), vrsta goriva: dizel, barva: rumena, obratovalna teža: 2.460 kg, Leto izdelave: 2015, obratovalne ure: 516 h, Ammann ARX26 Leto izdelave: 2015 Gorivo: Diesel Teža: 2460 kg Moč: 22,5 kW Maks. delovna širina: 1,2 m Delovne ure: 516 Transportne dimenzije: 2330 x 1630 x 2550 mm Na zalogi Kedpfx Aey Rxx Tog Eodr Opis: Stroj je v dobrem stanju, motor in hidravlični sistem sta zelo čista in delujeta brezhibno. Cena je NETTO za izvoz. Za dodatna vprašanja o stroju prosim pošljite e-pošto. Govorimo: - angleško - nemško - madžarsko

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, obratovalne ure: 11.000 h, BULDÓŽER CATERPILLAR D 5 M LGP Kedpfxjxxal Us Ag Eedr LETO 1999 11.000 UR RIPPER NAGIBNA LOPATA

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 4.499 h, Oprema: pogon na vsa štiri kolesa, Številka vozila 12110 Pridržujemo si pravico do napak in vmesne prodaje Kdodpfx Agjy T Ulhe Eor

Stanje: novo, številka stroja/vozila: PA1268-N1, Novo long reach (dolgi) krak, primeren za KOMATSU PC 200 - 240,-6,-7,-8 in druge, dolžina 55 čevljev = ca. 16,76 m, vklj. z novo izkopno žlico z zobmi, širina ca. 970 mm. Kdodpfsrhi Sdsx Ag Esr PA1268 Naša ponudba je načeloma brez novega tehničnega pregleda TÜV. Če želite nov TÜV, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dobave in plačila. Z veseljem vam pripravimo ponudbo za financiranje ali lizing te opreme. Prosimo, kontaktirajte nas!