Kamion z zamenljivo nadgradnjo

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: Will be provided. • Please refer to the attached documentation for detailed vehicle specifications. Lodoy E A Smepfx Aibohf • Oil pump type: LEDUC • Fifth wheel with sliding function and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (etched/smooth steel sheet) Superstructure: Crane swap body system: The body including crane can be dismounted, and a fifth wheel can be installed on the chassis instead. The operation of the crane and body in combination with the fifth wheel is also possible. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. • Installation/bolting of the crane and main outrigger support to the subframe. Installation of all hydraulic and electrical connections. Installation location: front. • Cargo bed design as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Cargo platform coated, painted in RAL color (chassis color) • Removable aluminum drop sides by Suer, height 600 mm, anodized design with steps, removable steel stakes (Kinngripp type) • Standard platform floor made of welded 4 mm steel checker plate, painted in RAL (chassis color) • 6 pcs. recessed lashing eyes, 2500 daN each side, mounted in perforated profile for flexible positioning • 4 x lashing points for chains, 6500 daN (2x front and 2x rear on the body) • Reinforced front wall consisting of a welded frame, welded 4 mm steel plate, and 5 accessory hooks; front wall height approx. 1300 mm, painted steel with 2 fold-down lashing eyes for tie-down belts, welded on • Cladding plates, fenders in aluminum checker plate (sandblasted, powder-coated, and painted) • Multifix stake pockets: 2 rows with spacing approx. 80 cm from front and rear • Brackets (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizer mounted under chassis • Mounting of underride protection at the rear and the additional stabilizer, including installation of the hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semi-trailers as well as at the rear for trailers • New crane, type FASSI F545 RA 2.27 with continuous rotation, fully installed, commissioned, and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For detailed crane equipment, please refer to the attached documentation • Series 5450 • Initial TÜV-UVV inspection and crane parametrization according to the technical regulations and load charts of FASSI loading cranes Additional equipment and crane accessories: • 5 x crane outrigger pads with holders, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, and crane inspection book Lighting: • 2 x LED working lights integrated into the front wall • 2 x revolving beacons on the FH cab roof • 2 x flashing lights on the bonnet • 2 x LEDs under the body at the rear, each left and right, arrangement as required • 4 x LED working lights, two left and two right under the body in the area of the support legs • 4 x yellow LED light strips, one on each support For further information, feel free to contact us upon request.

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis - New Vehicle: - MODEL 2024 - Manufacturer/Model: Volvo FH500 6x2, Wheelbase 3700 mm, VIN: To be provided. - For detailed vehicle specifications, please refer to the attached documents. - Oil pump type: LEDUC - Fifth wheel with sliding mechanism and self-lubricating feature (Type Jost JSK), mounted on the subframe - Front support covering with company logo (engraved/smooth sheet steel) Superstructure: Crane Swap System: The superstructure, including crane, can be removed, allowing a fifth wheel coupling to be installed on the chassis. Crane and superstructure operation, including fifth wheel, is also possible. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. - Assembly/bolting of crane and main support beam to the subframe. Lsdpjy E A Sgjfx Aibohf Installation of all hydraulic and electrical connections. Mounting position: front - Flatbed executed as removable steel/welded construction - Length approx. 380 cm, width approx. 248 cm - Flatbed body painted. Color shade RAL (chassis color) - Removable aluminum drop sides, manufacturer Suer, height 600 mm, anodized with integrated steps, removable Kinngripp stakes. - Standard flatbed floor made of welded 4 mm steel tread plate, painted in RAL (chassis color) - 6 recessed lashing rings, 2500 daN each side, in slotted profile for flexible positioning. - 4 x lashing points for chains, 6500 daN (2x front and 2x rear on the superstructure) - Robust front wall consisting of a welded frame, welded-on 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel version painted, with 2 folding lashing eyes for straps, welded on. - Cover panels, mudguards made of aluminium tread plate (sand-blasted, powder-coated, and painted) - Multifix stake pockets, 2 rows positioned approx. 80 cm from the front wall and rear. - Holders (for support plates, crane mats) galvanized steel. - Additional support mounted under the chassis. - Installation of rear underrun protection and additional support, including mounting of hydraulic and electrical connections. - Duomatic and red/yellow couplings, front for semi-trailer as well as rear for trailer. - New crane, type FASSI F545 RA 2.27, continuous rotation, fully assembled, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions. - For detailed crane specifications, please refer to the attached documents. - Series 5450 - Initial TÜV-UVV approval and parameterization of the crane according to technical regulations and load diagrams of FASSI loader cranes. Additional equipment and crane accessories: - 5 x crane support plates with holders, layout as per production drawing. - AWC (automatic rope length control) - Operating manual, maintenance manual, and crane inspection book. Lighting: - 2 x integrated LED work lights in the front wall - 2 x rotating beacons on the FH roof - 2 x strobe lights in the engine bonnet - 2 x LEDs mounted under the body at the rear, left and right, placement as agreed. - 4 x LED work lights, 2 left and 2 right under the body near the support legs. - 4 x yellow LED strips, one on each support leg. Further information available upon request.

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis – New Vehicle: – MODEL 2024 - Manufacturer/Type: Volvo FH500 6x2, Wheelbase 3700 mm, VIN: To be provided. - For detailed vehicle equipment, please refer to the attached documents. - Oil pump type: LEDUC - Fifth wheel with sliding function and self-lubricating (type Jost JSK), mounted on the subframe - Front support cover with company logo (engraved/smooth steel sheet) Body: Crane interchange system: The superstructure, including the crane, can be dismounted, and a fifth wheel can instead be installed on the chassis. The crane and body can also be used together with the fifth wheel mounted. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. - Mounting/bolting of crane and main outrigger carrier to the subframe. Installation of all hydraulic and electrical connections. Installation position: front - Drop-side body version as steel/welded construction, removable - Approx. length 380 cm, width 248 cm. - Body painted in chassis color (RAL code) - Removable aluminum side boards, Suer brand, 600 mm height, anodized with integrated steps, removable Kinngripp stakes. - Standard platform floor with welded 4 mm steel chequer plate, painted in chassis color (RAL) - 6 retractable lashing rings per side (2,500 daN per ring), in slot pattern profile, flexibly arranged. - 4 x tie-down points for chains (6,500 daN) (2 front, 2 rear on the body) - Heavy-duty front wall with welded frame, welded 4 mm steel sheet, 5 accessory hooks, approx. 1300 mm height, painted steel, with 2 welded folding lashing points for tie-down straps. - Cladding panels and fenders made from aluminum chequer plate (sandblasted, powder-coated, painted) - Multifix stake pockets, 2 rows at approx. 80 cm intervals from the front and rear wall. Ledpey E A Sajfx Aibohf - Brackets (for support plates, crane pads) made of galvanized steel. - Additional supports mounted underneath the chassis. - Rear underrun guard and extra support installation with hydraulic and electrical connections. - Duomatic and red/yellow connections at the front for semi-trailer and also at the rear for trailer connections - New crane, type FASSI F545 RA 2.27, endless rotation, fully installed, commissioned, and parameterized, 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions. - For detailed crane equipment, please refer to the attached documents. - Series 5450 - Initial TÜV-UVV approval and parameterization of the crane in accordance with technical regulations and load charts from FASSI crane manufacturer. Additional equipment and crane accessories: - 5 crane support pads with brackets, arranged as per manufacturing drawings. - AWC (automatic wire rope length monitoring) - Operating manual, maintenance manual, and crane inspection log Lighting: - 2 LED AS integrated in the front wall - 2 rotating beacons on FH roof - 2 strobe lights in the engine hood - 2 LEDs under the body at the rear (left/right), arrangement as agreed - 4 LED AS, 2 left and 2 right, mounted under the body in the support leg area - 4 yellow LED light strips, 1 on each support leg Further information available on request.