Tovornjak s ploščadjo

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • Detailed vehicle specifications are available in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (Jost JSK type), mounted on the subframe • Front support cover with company logo (engraved / smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be dismantled, enabling a fifth wheel to be mounted on the chassis. Operation with crane and superstructure including fifth wheel is also possible. Lhedpey E A Stjfx Aibjf The vehicle has two fifth wheels in total, both of which are longitudinally adjustable. • Mounting/bolting of the crane and main stabilizer beam onto the subframe. Installation of all hydraulic and electrical connections. Mounting position: Front • Platform construction as removable steel/welded design • Length approx. 380 cm, width approx. 248 cm. • Platform body painted. Color tone in RAL (chassis color) • Removable aluminium side boards by Suer, height 600 mm, anodised version with integrated steps, removable Kinngripp stanchions. • Standard platform floor with welded steel checker plate, 4 mm, painted in RAL (chassis color) • 6 retractable lashing rings (2,500 daN each side), fitted in slotted profiles for flexible positioning. • 4 x lashing points for chains (6,500 daN): 2 at the front and 2 at the rear of the body. • Robust front wall made of welded frame, welded 4mm steel sheet, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyes for tie-down straps, welded on. • Cladding sheets, mudguards made from aluminium checker plate (sandblasted, powder-coated and painted) • Multifix stanchion pockets: 2 rows, spaced approx. 80 cm from bulkhead and rear. • Holders for support discs and crane plates, galvanized steel. • Additional stabilizer mounted beneath the chassis. • Installation of underrun protection at the rear and for the additional stabilizer, including hydraulic and electrical connections. • Duomatic and red/yellow connections at the front for semi-trailers, as well as at the rear for trailers. • New crane, type FASSI F545 RA 2.27, continuous rotation, fully mounted, installed, and parameterised, with 7 hydraulic extensions, and JIB L214 with 4 hydraulic extensions. • Detailed crane specifications can be found in the attached documents. • Series 5450 • Initial TÜV-UVV inspection and parameterisation of the crane according to the manufacturer's technical regulations and load charts (FASSI loader cranes). Additional equipment and crane accessories: • 5 x crane support plates with holders, positioned according to production drawings. • AWC (automatic rope length control) • User manual, maintenance manual, and crane inspection book. Lighting: • 2 x LED working lights integrated in the front wall • 2 x beacon lights on the FH cab roof • 2 x flashing lights in the engine hood • 2 x LED lights under the body at the rear, left and right as agreed • 4 x LED working lights, 2 on each side mounted under the body near the support legs • 4 x yellow LED light strips, 1 on each support leg Further information available upon request.

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: Will be provided. • Please refer to the attached documentation for detailed vehicle specifications. • Oil pump type: LEDUC • Fifth wheel with sliding function and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (etched/smooth steel sheet) Superstructure: Crane swap body system: The body including crane can be dismounted, and a fifth wheel can be installed on the chassis instead. The operation of the crane and body in combination with the fifth wheel is also possible. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. • Installation/bolting of the crane and main outrigger support to the subframe. Installation of all hydraulic and electrical connections. Installation location: front. • Cargo bed design as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Cargo platform coated, painted in RAL color (chassis color) • Removable aluminum drop sides by Suer, height 600 mm, anodized design with steps, removable steel stakes (Kinngripp type) • Standard platform floor made of welded 4 mm steel checker plate, painted in RAL (chassis color) • 6 pcs. recessed lashing eyes, 2500 daN each side, mounted in perforated profile for flexible positioning • 4 x lashing points for chains, 6500 daN (2x front and 2x rear on the body) • Reinforced front wall consisting of a welded frame, welded 4 mm steel plate, and 5 accessory hooks; front wall height approx. 1300 mm, painted steel with 2 fold-down lashing eyes for tie-down belts, welded on • Cladding plates, fenders in aluminum checker plate (sandblasted, powder-coated, and painted) • Multifix stake pockets: 2 rows with spacing approx. 80 cm from front and rear • Brackets (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizer mounted under chassis • Mounting of underride protection at the rear and the additional stabilizer, including installation of the hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semi-trailers as well as at the rear for trailers Lhedjy E A Smspfx Aibjf • New crane, type FASSI F545 RA 2.27 with continuous rotation, fully installed, commissioned, and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For detailed crane equipment, please refer to the attached documentation • Series 5450 • Initial TÜV-UVV inspection and crane parametrization according to the technical regulations and load charts of FASSI loading cranes Additional equipment and crane accessories: • 5 x crane outrigger pads with holders, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, and crane inspection book Lighting: • 2 x LED working lights integrated into the front wall • 2 x revolving beacons on the FH cab roof • 2 x flashing lights on the bonnet • 2 x LEDs under the body at the rear, each left and right, arrangement as required • 4 x LED working lights, two left and two right under the body in the area of the support legs • 4 x yellow LED light strips, one on each support For further information, feel free to contact us upon request.

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis – New Vehicle: – MODEL 2024 - Manufacturer/Type: Volvo FH500 6x2, Wheelbase 3700 mm, VIN: To be provided. - For detailed vehicle equipment, please refer to the attached documents. - Oil pump type: LEDUC - Fifth wheel with sliding function and self-lubricating (type Jost JSK), mounted on the subframe - Front support cover with company logo (engraved/smooth steel sheet) Body: Lhjdpfey E A Sajx Aibjf Crane interchange system: The superstructure, including the crane, can be dismounted, and a fifth wheel can instead be installed on the chassis. The crane and body can also be used together with the fifth wheel mounted. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. - Mounting/bolting of crane and main outrigger carrier to the subframe. Installation of all hydraulic and electrical connections. Installation position: front - Drop-side body version as steel/welded construction, removable - Approx. length 380 cm, width 248 cm. - Body painted in chassis color (RAL code) - Removable aluminum side boards, Suer brand, 600 mm height, anodized with integrated steps, removable Kinngripp stakes. - Standard platform floor with welded 4 mm steel chequer plate, painted in chassis color (RAL) - 6 retractable lashing rings per side (2,500 daN per ring), in slot pattern profile, flexibly arranged. - 4 x tie-down points for chains (6,500 daN) (2 front, 2 rear on the body) - Heavy-duty front wall with welded frame, welded 4 mm steel sheet, 5 accessory hooks, approx. 1300 mm height, painted steel, with 2 welded folding lashing points for tie-down straps. - Cladding panels and fenders made from aluminum chequer plate (sandblasted, powder-coated, painted) - Multifix stake pockets, 2 rows at approx. 80 cm intervals from the front and rear wall. - Brackets (for support plates, crane pads) made of galvanized steel. - Additional supports mounted underneath the chassis. - Rear underrun guard and extra support installation with hydraulic and electrical connections. - Duomatic and red/yellow connections at the front for semi-trailer and also at the rear for trailer connections - New crane, type FASSI F545 RA 2.27, endless rotation, fully installed, commissioned, and parameterized, 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions. - For detailed crane equipment, please refer to the attached documents. - Series 5450 - Initial TÜV-UVV approval and parameterization of the crane in accordance with technical regulations and load charts from FASSI crane manufacturer. Additional equipment and crane accessories: - 5 crane support pads with brackets, arranged as per manufacturing drawings. - AWC (automatic wire rope length monitoring) - Operating manual, maintenance manual, and crane inspection log Lighting: - 2 LED AS integrated in the front wall - 2 rotating beacons on FH roof - 2 strobe lights in the engine hood - 2 LEDs under the body at the rear (left/right), arrangement as agreed - 4 LED AS, 2 left and 2 right, mounted under the body in the support leg area - 4 yellow LED light strips, 1 on each support leg Further information available on request.