Tristrani nagibni priklopnik

FLIEGL TSK 118 Tandem Dreiseitenkipper 5,0m Kipp Anhäng

Stanje: novo, največja dovoljena obremenitev: 8.580 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further information plus pre-carriage / provision ex storage location 26639 Wiesmoor €1,280.00 / net Chassis: Central axle tipper trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball bearing mount Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underride protection Rear mudflaps across the entire width (not in combination with forklift holder) Quarter-shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! Sideboard contacts the toolbox when folded down. Lockable storage compartment for loading ramps under the loading area Central axle trailer drawbar Drawbar with certified 40 mm drawbar eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235/75 R 17.5" manufacturer’s choice Steel rims, factory silver Braking system 2-line compressed air brake system Color-coded piping for easy service Hand spindle parking brake 24 volt ABS and ALB, front with ABS connector and connecting cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! 2 non-swappable coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 to 24 volts, multi-chamber LED lights, side amber LED lighting, LED license plate lights (Note: certain towing vehicles may cause false diagnostic errors, despite proper function) 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin non-swappable connectors at the front, with connecting cable 1 additional LED work light at the rear, controlled via reversing light Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic delivery rate of 55 l/min). Hydraulic connection with SVK plug NW 10/3, including connecting hose Operation hydraulically via truck PTO Tipper body Robust tipper body with 4 mm steel floor, steel sideboard structure, continuous side panels, foldable and swinging with central locking at the bottom. Rear corner posts plug-in. Rear panel foldable and swinging, with central locking at the bottom. Bed length approx. 5,000 mm, sidewalls with 6 lower hinges. Sideboard retraction springs (not possible with foldable front panel) Bed width 2,420 mm 3 pairs of lashing rings in the floor, each 5 tons Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be achievable within the permissible axle/support/kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service hotline prepared for single-line license plate holder Iiedpfx Ahey Dzlioksa Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Coating Frame hot-dip galvanized, including passivation "15 years warranty against rust-through" Sideboard/platform RAL 9010 pure white Note!

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further Information Plus pre-carriage / provision from storage location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing mount Support jack at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Side wall contacts toolbox when folded down. Lockable storage for loading ramps underneath the loading area NO ramps included Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Axles/chassis laser measured" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalizer (rocker equalizer) Wheels and Tires 235 / 75 R 17.5" Manufacturer's choice Factory silver steel rims Brake System 2-line air brake system Color-coded lines for easier servicing Manual spindle parking brake Integral air reservoir ABS and ALB, with ABS connector at the front including connecting cable Caution: The trailer may only be towed by towing vehicles that ensure ABS function! 2 tamper-proof coupling heads at the front with connection lines to the truck Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin tamper-proof plugs at the front with connecting cable Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, throttle must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipper Body Robust tipping body with 4 mm steel floor, steel side wall construction, continuous side walls foldable not pendulum-mounted, without lower central locking. Removable rear corner stanchions. Rear wall foldable and pendulum-mounted, lower central locking. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Drop side retraction springs (not available with split side walls) Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated for 5 t Operational Notes The specified total weight is technically possible; depending on the type of load, the total weight may not be achievable while observing the permissible axle/support/kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra approval and report (in accordance with §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against rust-through" Side boards/platform RAL 5002 ultramarine blue Note! Platform interior only primed – if painted, special platform version required! Optional: loading ramps €1,280.00 net Ijdpfxoy Dzlcj Ahkoia