Tovornjak z žerjavom

Volvo FH 540 8x2 EFFER 955/8S + JIB 6S

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Bodpfx Ajhlz R Ssn Iedc Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, BERTOJA SEMITRAILER 13.80m BRAND NEW, READY FOR REGISTRATION Galvanised double hydraulic ramp Protective sideboard on neck Winch preparation Self-steering axle CONTACT: Bsdpjxpi A Rsfx An Iodc 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30am–7:00pm - SATURDAY 8:30am–2:00pm WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semitrailer - Refrigerated Tanker Semitrailer – Lamberet - Schmitz Isuzu - Fixed Platform - Crane - Tipper - 4 Axles - Rear 4 Axles - Tway-T-Way-540-460 HP - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tailgate Loader - Refrigerated Case - Insulated with Fridge - Van Domenico Truck srl accepts no liability for any discrepancies in technical data, fittings, or features, which may differ from those described. We recommend verifying the features of each specific vehicle.

Stanje: zelo dobro (rabljeno), barva: zelen, prva registracija: 08/2020, tip droga: prosto dvigalo s teleskopsko roko, Leto izdelave: 2020, obratovalne ure: 1.536 h, Oprema: spojka prikolice, Pogon: kolo Skupna dovoljena masa: 3.500 kg Dolžina droga: 36 m Dvižna zmogljivost: 2.400 kg Prosti dvig: 1 cm Znamka nadgradnje: BOCKER AHK 36/2400 MONTAŽNI ŽERJAV / KRAN Oznaka CE: da Tehnično stanje: zelo dobro Optično stanje: zelo dobro BOCKER AHK36/2400 MONTAŽNI ŽERJAV ALU PRIKOLICA DALJINSKO UPRAVLJANJE Bdedpfoy Ddmvsx An Ijc ALU MONTAŽNI ŽERJAV DELOVNA VIŠINA 36 METROV MAKS. DVIG 2.400 KG Z DELOVNIM KOŠEM 1536 DELOVNIH UR!!!! PRIKOLICA JE V DOBREM STANJU

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, prva registracija: 03/2015, dolžina tovornega prostora: 134.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 480 mm, vzmetenje: hidravlika, Leto izdelave: 2015, Oprema: ABS, = Dodatne možnosti in oprema = - Centralno mazanje = Dodatne informacije = Konfiguracija osi Bsdpfxevtc Ais An Ijdc Vzmetenje: hidravlično vzmetenje Zadnja os 1: Max. obremenitev osi: 12.000 kg; Krmiljena Zadnja os 2: Max. obremenitev osi: 12.000 kg; Krmiljena Teže Lastna teža: 12.660 kg Nosilnost: 34.340 kg Skupna dovoljena masa: 47.000 kg Funkcionalno Višina nakladalne površine: 48 cm Izvlečna nadgradnja: Da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: Po dogovoru Dodatne informacije Za več informacij se obrnite na Davida F Middelmana.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WMAN08ZZ8FY326339, prevoženi kilometri: 99.700 km, moč: 213 kW (289,60 KM), prva registracija: 02/2015, vrsta goriva: dizel, lastna masa: 15.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 4x2, gorivo: dizel, zavore: intarder, barva: rumena, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 2015, Oprema: ABS, računalnik na krovu, zapora diferenciala, žerjav, LOCATION: 73230 Kirchheim unter Teck -- Böcker AK 44 / 400 on MAN TGM 18.290 4x2 BL First registration: 08.08.2015 VIN: WMAN08ZZ8FY326356 -- CHASSIS MAN TGM 18.290 4x2 BL Weight configuration: 8,000 kg / 11,500 kg Front axle: leaf spring suspension, axle load 8 t Rear axle: leaf spring suspension, axle load 11.6 t, differential lock Engine: MAN 6-cylinder diesel, 213 kW (290 HP) / Emission standard EURO 6 Bedpfsw Igglsx An Isdc Transmission: 8-speed manual gearbox with reduction Retarder: Intarder, engine brake Tyres: FA – 315/55 R22.5 | RA 1 + 2 – 315/80 R22.5 Cab: C, short cab, comfort driver's air-suspension seat BÖCKER SUPERSTRUCTURE CRANE OPERATION - Maximum jib length: 44.00 m (with 2 m mechanical extension) - 500 kg lifting capacity at 28.00 m - 1,000 kg lifting capacity at 21.00 m - 2,000 kg lifting capacity at 14.00 m - 4,000 kg lifting capacity at 8.20 m AERIAL PLATFORM - Maximum working height: 41.5 m - Slewing range: approx. 620 degrees - 100 kg at 33 m - 250 kg at 30 m OTHER Radio remote control Work cage optional Further equipment features available upon request. Ex-ownership: single owner – very good condition – immediately available from stock in Kirchheim unter Teck.

Stanje: rabljeno, prevoženi kilometri: 365.385 km, moč: 397 kW (539,77 KM), prva registracija: 04/2018, vrsta goriva: dizel, velikost pnevmatike: 385/65R22.5, konfiguracija osi: 8x4, medosna razdalja: 4.300 mm, gorivo: dizel, zavore: retarder, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 11.100 mm, skupna širina: 2.550 mm, dolžina tovornega prostora: 6.940 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 1.200 mm, Leto izdelave: 2018, Oprema: ABS, AdBlue, centralno zaklepanje, električno upravljanje oken, greljenje sedeža, nadzor oprijema, parkirni grelec, retarder, servovolan, tempomat, zapora diferenciala, žerjav, = Additional Options and Accessories = - Electric power steering Bdjdpsx Iggmofx An Isc - Remote central locking - Refrigerator - Leather interior - Lift axle - Air suspension - Engine brake - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Hiab 548E-9 4 x hydraulic outriggers. 9 x hydraulic extensions. Radio remote control. 2.20 m – 18,000 kg 4.70 m – 9,600 kg 6.20 m – 6,900 kg 7.90 m – 5,100 kg 9.70 m – 3,900 kg 11.50 m – 3,100 kg 13.50 m – 2,500 kg 15.60 m – 2,060 kg 17.60 m – 1,760 kg 19.70 m – 1,540 kg 21.70 m – 1,380 kg Loading box: 694 cm x 249 cm Loading height: 120 cm Trailer coupling = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steering axle; Tire tread left: 20%; Tire tread right: 20%; Suspension: Leaf suspension Rear axle 1: Tire size: 295/80R22.5; Twin tires; Tire tread left inner: 15%; Tire tread left outer: 15%; Tire tread right inner: 15%; Tire tread right outer: 15%; Suspension: Air suspension Rear axle 2: Tire size: 295/80R22.5; Twin tires; Tire tread left inner: 15%; Tire tread left outer: 15%; Tire tread right inner: 15%; Tire tread right outer: 15%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steering axle; Tire tread left: 50%; Tire tread right: 50%; Suspension: Air suspension Weights Curb weight: 22,775 kg Payload: 14,225 kg Gross vehicle weight: 37,000 kg Functionality Crane: Hiab Interior Upholstery: Leather Financial Information Price: On request Identification Type number: FH 540 / 8x4*4 / HIAB 548E-9 CRA = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information, but no rights can be derived from the information provided.

Stanje: rabljeno, prevoženi kilometri: 86.472 km, moč: 375 kW (509,86 KM), prva registracija: 04/2019, vrsta goriva: dizel, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, barva: bež, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2019, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Truck: VOLVO FH 500 8x4 BL with lift axle, I-Shift, top specification Condition: Very good, 7,400 engine hours, 4,900 PTO hours Tyres: 60-90% tread remaining Body: Flatbed, extendable at the rear Bdedpowr Sw Ejfx An Ioc Crane: FASSI F545RA.2.26 XE-DYNAMIC, 6+4 jib

Stanje: rabljeno, prevoženi kilometri: 85.600 km, moč: 552 kW (750,51 KM), prva registracija: 05/2022, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, Sedlo za polpriklopnik Vlečna kljuka z 40 mm očesom Nakladalna ploščad Tovornjak ima vse dodatne opcije, ki jih je mogoče poslati po e-pošti Effer nakladalna dvigalka 2055 8 S s 3 mehanskimi podaljški Jib 6 S Heavy Duty z 2 mehanskima podaljškoma 8 hidravličnih iztegov na glavnem iztegljivem ramenu 19,40 m 6100 kg 6 hidravličnih iztegov na jib 31,63 m 1800 kg, plus 2 mehanska podaljška 35,6 m 1250 kg Homologacija za košaro za delo/prilagoditev košare za delo Sprednje podpornike 50 t 100 % nosilnosti v 360 stopinjah, brez omejevalnika momenta obremenitve Vse dodatne opcije so na voljo po e-pošti Bdjdpjy Ahc Eofx An Ioc

Stanje: rabljeno, prevoženi kilometri: 129.252 km, dvižna višina: 38.000 mm, Leto izdelave: 2015, Intended use: Construction Drive: Wheel Unladen weight: 27,875 kg Lifting capacity: 23,800 kg Serial number: 122024 Front tire condition: 70% Rear tire condition: 70% Bsdpfxsw A Hb Ts An Iedc Transport dimensions (L x W x H): 11.1 x 2.55 x 3.9 m Please contact PFEIFER GROUP for further information.

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Bdedpfxjg Sk T Dj An Iec Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes