Polpriklopnik s premičnim dnom

STAS bioSTAR 91 cbm

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 91 m³, skupna širina: 2.550 mm, Oprema: ABS, bioSTAR 91.3 m³ Basalt Grey Chassis Type: Moving Floor Kingpin Load National (t): 12 Axle Load National (t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Technically Permissible Gross Weight: 39 = 12+9+9+9 t Wheelbase (Moving Floor Trailer) (mm): 7850 Interior Height Front (mm): 2641 Interior Height Rear (mm): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Total Width (mm): 2550 Total Length (mm): 14000 Chassis Tire Size: 385/65R22.5 Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brake Brake Type: JOST - DCA-T7 Offset (ET): 120 Option First Axle: Start Assist Start Assist optimized with activation via button in truck (button installation not included) and by pressing brake pedal three times Option Third Axle: Without Brake Pad Wear Indicator: Connected Tire Pressure Monitoring: Wabco TrailerPulse Air Suspension: ECAS with lift and lower valve Lowering of air suspension via Smartboard and lift/lower valve Pneumatic Coupling Head: European Palm Coupling Rims: Speedline Diamond Wheel Nut Caps: Chrome with STAS logo Landing Gear: Weweler as steel-geared landing gear, type Weweler, with compensating feet, single-sided operation, and 2 speed stages Underrun Protection: Fixed underrun bar Lighting Manufacturer: Aspöck Hjdpexdqbkjfx Agfok Lighting Type: EUROPOINT III - LED 2 LED reversing lights, mounted left and right on rear lamp carrier Work Lights (switchable): 2 LED reversing lights, mounted left and right at front in area of landing gear Hydraulic Coupling: Rotary coupling Hydraulic Coupling Position: Connection point on front wall (additional connection point at landing legs) Hydraulic positioning: Pressure return left, return right (CON) Air Connection: In toolbox Aluminum Access Ladder 3.80 m, mounted right in direction of travel Brush and Shovel Holders: Three each, mounted left in direction of travel Moving Floor System: Manufacturer Cargo Floor Air and Electrical Console: Mounted centrally with gantry Lighting Unit Protection: One-piece mudguard Body Front Wall Angle (°): 90 Rear Wall Angle (°): 90 Rear Wall Type: Swing Doors A-Shield: Foldable on rear wall, mounted right in direction of travel Cover Plate between floor and front wall: Fixed aluminum plate and PVC strips Fifth Wheel Plate Type: Standard fifth wheel plate Front Wall Profile: 3 mm - 2 mm Side Wall Profile: 3 mm - 2 mm, smooth inside and outside, double-wall profiles 600 mm wide - 30 mm thick Wear Plates: Rectangular 1500 x 1000 x 4 mm Floor System Operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor Profile Type: 8 mm ribbed Moving Floor End Plate: Stainless steel With additional plastic guides beneath the floor profiles End Cap Reinforcement: Stainless steel shoes over end caps of floor profiles, with aluminum wear plate above end caps Oil Temperature Sensor for moving floor system Complete Discharge Wall Rear Wall: Aluminum Swing Door Design: 1/2 to 1/2, with central locking crossbar Door Wing Opening: Right door wing opens first (STAS manufacturer’s choice) Locking crossbar: Swiveling Crossbar Material: Aluminum Rear Door Locking: 1x rotary bar/door half

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 91 m³, Leto izdelave: 2024, Oprema: ABS, Last king pin load (t) 12 Axle load (t) 8 Axle spacing (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Wheelbase (mm) 7850 Internal height front (mm) 2641 Internal height rear (mm) 2821 Overall width (mm) 2550 Overall length (mm) 14000 Chassis steel Tyres 385/65R22.5 Chassis neck height (mm) 217 Axle version Intra Brake type SAF - SBS 2220 Option 1st axle with traction aid Hsdpfxoqaaf Re Agfjk Optimised traction aid Tyre pressure monitoring system Air suspension with lift and lower valve Lowering of air suspension via Smartboard and lift/lower valve Pneumatic coupling head European palm coupling Rims steel Landing legs Steel gearbox landing legs at front, type JOST MODUL, with single-sided operation and 2-speed gearbox Operation underrun protection fixed Spray flaps underrun protection black with STAS logo over full width of underrun protection Control console EBS control on left in direction of travel, behind axle assembly Sliding floor control console positioned on left in direction of travel, behind axles Tool box plastic Lighting type ECOLED II Reversing lights 2 LED reversing lights, rear left and right Work lights 2 LED work lights front left and right, in area of landing legs Hydraulic coupling rotary coupling, female, 3000 mm hose Hydraulic coupling connection option located at front wall Smartboard Aluminium access ladder 3.80 m Broom and shovel holder positioned on left side protection in direction of travel Load pressure gauge Ø 100 mm - front of chassis With two plastic wheel chocks including brackets Moving floor system manufacturer Cargo Floor Air and electric supply console centrally positioned with gantry Lighting unit protection: single-piece protective cover Superstructure Front wall angle (°) 90 Rear wall angle (°) 90 Rear wall type swing doors Cover plate between floor and front wall: fixed aluminium plate and PVC strips Standard fifth wheel plate Front wall profile 3 mm - 2 mm Side wall profile 3 mm - 2 mm, smooth inside and out, double-wall profiles 600 mm wide - 30 mm thick Distance lower corner profile to upper side wall at rear 2649 Floor system operation: radio remote control Cargofloor control type CF 500 SL-C - E-CONTROL Number of floor profiles 21 Type of floor profile 10 mm ribbed End plate moving floor aluminium With additional plastic guides beneath floor profiles Emptying wall aluminium Emptying wall with brushes Emptying wall hand grip: stainless steel handles for easy movement Mounting of emptying wall: 6 wheels with bidirectional cleaning (cargo floor) Rear wall aluminium Swing door version divided 1/2 to 1/2, with upper crossmember Opening of door wings: right-hand door wing opens first Crossmember on door: swivelling version Rear door lock 1 x rotary bar per door half Rear wall sealing with standard rubber seal Rear wall additional lock pneumatic single-acting Operation of additional lock manually at side-mounted controls on the console Rear door impact protection aluminium buffers Tensioning gear for tarpaulin tensioning, tensioning gear with handle, mounted below/on the side wall of the body Type of roof rib steel straight design, foldable Number and position of roof ribs: 2 centre ribs (centrally, equally spaced) and 1 rear rib (rear) Straight tarpaulin holders