Polovični polnilnik z nizkim nakladanjem

Lako | SPECIAL TRAILER | PALFINGER 42502 | FULL STEE...

Stanje: rabljeno, prevoženi kilometri: 360.000 km, moč: 390 kW (530,25 KM), prva registracija: 05/2020, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2020, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, DAF XF 530 6X2 dvignljiv/krmiljen, popolnoma zračno vzmeten, ploščad z dvigalom popolnoma opremljen Medosna razdalja: 4800 mm Nakladalna površina: 6200 mm Skupna dolžina: 9900 mm Gbodpfex Sbz Tsx Adgjk Dvigalo: Palfinger PK 23002-SH neomejeno vrtenje 6+1, skupno 19 m, 740 kg, daljinsko upravljanje, paket cevi s hitrim spojem, vilica za palete (1100h) Stanje: odlično in popolnoma opremljeno Na voljo je tudi prikolica, trenutno v dveh različicah: Jumbo ali Standard

Stanje: rabljeno, prevoženi kilometri: 403.500 km, moč: 360 kW (489,46 KM), prva registracija: 10/2017, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, konfiguracija osi: 8x2, medosna razdalja: 3.750 mm, gorivo: dizel, zavore: retarder, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, skupna dolžina: 10.450 mm, skupna širina: 2.550 mm, dolžina tovornega prostora: 6.350 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.100 mm, Leto izdelave: 2017, Oprema: ABS, AdBlue, asistent za ohranjanje voznega pasu, greljenje sedeža, klimatska naprava, nadzor oprijema, parkirni grelec, retarder, spojka prikolice, tempomat, zapora diferenciala, žerjav, = Further Options and Accessories = - Alarm system - Refrigerator - Lifting axle - Air suspension - Towing jaw coupling - Engine brake - PTO (Power Take-Off) - Rear view camera - Disc brakes - Sun visor Gbjdpfx Adjx Srx Nogok - Spotlights - Lane departure warning system - Auxiliary heater - Toolbox = Notes = HMF 5020 K6 FJ 1000 Front stabilizers. Scanreco radio remote control. 4.70 m = 9,270 kg 6.40 m = 6,460 kg 8.30 m = 4,780 kg 10.30 m = 3,700 kg 12.30 m = 3,000 kg 14.40 m = 2,500 kg 16.70 m = 2,150 kg FJ1000 19.70 m = 1,100 kg 21.30 m = 990 kg 22.90 m = 900 kg 24.70 m = 820 kg 26.60 m = 700 kg 28.50 m = 575 kg Hydraulic rear underrun protection and table. 2 x hydraulic stabilizers. Loading platform 635 cm + 120 cm extension. Loading height 110 cm. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Left tire tread: 70%; Right tire tread: 70% Rear axle 1: Tire size: 305/70R22.5; Twin tires; Left inner tread: 45%; Left outer tread: 45%; Right inner tread: 45%; Right outer tread: 45% Rear axle 2: Tire size: 305/70R22.5; Twin tires; Left inner tread: 45%; Left outer tread: 45%; Right inner tread: 45%; Right outer tread: 45% Rear axle 3: Tire size: 385/55R22.5; Steered; Left tire tread: 50%; Right tire tread: 50% Weights Curb weight: 22,285 kg Payload: 14,715 kg Gross Vehicle Weight: 37,000 kg Functional Crane: HMF Financial Information Price: On request Identification Type number: G490 8x4*4 / HMF 5020 + JIB = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Stanje: rabljeno, prevoženi kilometri: 281.486 km, moč: 552 kW (750,51 KM), prva registracija: 06/2019, vrsta goriva: dizel, velikost pnevmatike: 385/65R22.5, konfiguracija osi: 8x4, medosna razdalja: 5.100 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, skupna dolžina: 11.200 mm, skupna širina: 2.550 mm, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2019, Oprema: ABS, AdBlue, centralno zaklepanje, električno upravljanje oken, greljenje sedeža, klimatska naprava, nadzor oprijema, parkirni grelec, servovolan, tempomat, zapora diferenciala, žerjav, = Additional Options and Accessories = - Electric power steering - Remote central locking - Refrigerator - Leather interior - Alloy wheels - Air suspension - PTO (Power Take-Off) - Radio - Rearview camera Gedoym Ntrspfx Adgjbk - Disc brakes - Sun visor - Differential lock - Spotlights - Auxiliary heater / Parking heater - Toolbox = Notes = Volvo FH 16 750 8x4 Full air suspension. Dynamic steering. HMF 9520 K7 Fly JIB: FJ 2200-K6 Front outrigger. Scanreco radio remote control. Winch. Man basket. 4.40 mtr - 17,010 kg. 6.10 mtr - 11,990 kg. 7.90 mtr - 8,780 kg. 9.80 mtr - 6,820 kg. 11.80 mtr - 5,470 kg. 13.90 mtr - 4,530 kg. 16.00 mtr - 3,780 kg. 18.10 mtr - 3,230 kg. FJ2200K6 with extra functions. 21.20 mtr - 1,705 kg. 22.70 mtr - 1,545 kg. 24.20 mtr - 1,410 kg. 25.80 mtr - 1,295 kg. 27.50 mtr - 1,195 kg. 29.30 mtr - 1,115 kg. 31.10 mtr - 985 kg. Manual extension: 33.00 mtr - 700 kg. 34.90 mtr - 400 kg. Loading box: Hydraulic extension: 170 cm. Hydraulic boat support legs. Folding rear bumper. Tool boxes around the truck. = More Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Steered; Left tire tread: 50%; Right tire tread: 50% Front axle 2: Tire size: 385/65R22.5; Steered; Left tire tread: 50%; Right tire tread: 50% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 2: Tire size: 315/70R22.5; Twin tires; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Weights Unladen weight: 27,415 kg Payload: 9,585 kg Gross vehicle weight: 37,000 kg Functional Crane: HMF Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 06/2026 Financial Information Price: On request Identification Type number: FH 16 750 8x4 / HMF 95 tm / JIB = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We strive to provide accurate information, but no rights can be derived from the texts provided.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 242.362 km, moč: 360 kW (489,46 KM), prva registracija: 09/2016, vrsta goriva: dizel, velikost pnevmatike: 385/22/22.5, konfiguracija osi: 8x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: zrak, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.100 mm, Leto izdelave: 2016, Oprema: ABS, AdBlue, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, klimatska naprava, meglenke, navigacijski sistem, parkirni grelec, spojka prikolice, tempomat, zapora diferenciala, žerjav, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - High beam headlights - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Particulate filter - Reversing camera - Sun visor - Auxiliary heater - Toolbox - Power take-off (PTO) - Central lubrication system - Towing jaw = Further Information = Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/22/22.5; alloy wheels; max. axle load: 9,000 kg; steered Front axle 2: Tire size: 385/55/22.5; alloy wheels; max. axle load: 9,000 kg; steered Rear axle 1: Tire size: 315/60/22.5; twin tires; differential lock; alloy wheels; max. axle load: 12,700 kg Rear axle 2: Tire size: 315/60/22.5; alloy wheels; lift axle; max. axle load: 8,300 kg Weights Curb weight: 25,800 kg Payload: 10,198 kg Gross vehicle weight (GVW): 36,000 kg Functional Boom: Telescopic (14 sections) Boom length: 38 m Gbodpfxsyiuqnj Adgjk Lifting capacity: 26,200 kg Lifting height: 3,800 cm Crane: EFFER 955/8S + JIB 6S, year of manufacture 2016, mounted behind the cab Body manufacturer: EFFER 955/8S + JIB 6S CE marking: yes Condition Technical condition: very good Visual condition: very good SCANIA G490 LB8X2*6HNB WITH EFFER 955/8S + JIB 6S CRANE + WINCH EURO 6 L PACKAGE 490 HP DRIVETRAIN 8X2*6HNB LAST AXLE LIFTABLE AND STEERABLE!!! FULL AIR SUSPENSION WHEELBASE 610 CM CG19H SLEEPER CAB FULL OPTIONS WITH AIR CONDITIONING AND AUXILIARY HEATING, NAVI, CAMERA, REFRIGERATOR, LEATHER, TV SPECIAL INTERIOR WITH LED LIGHTING OPTICRUISE AUTOMATIC TRAILER COUPLING MANY TOOLBOXES!!! ALCOA RIMS OPEN LOADING PLATFORM PLATFORM LENGTH 625 CM + 300 CM HYDRAULIC EXTENSION, TOTAL LENGTH 925 CM PLATFORM WIDTH 255 CM + SIDE EXTENSION LASHING EYES + STAKE POCKETS + TWISTLOCKS EFFER 955/8S + JIB 6S + WINCH OIL COOLER FOR CRANE HYDRAULICS 14X HYDRAULIC EXTENSIONS TOTAL WORKING HEIGHT 38 METERS!! MAX. LIFTING CAPACITY AT 2.50M = 26,200 KG MAX. LIFTING CAPACITY AT 33.55 METERS 720 KG CRANE CAN WORK IN FRONT OF THE CAB THANKS TO 1X FRONT OUTRIGGER 100% EXTRA CHASSIS REINFORCEMENT TOTAL 5X OUTRIGGERS LARGE HYDRAULIC WINCH WITH AUXILIARY EQUIPMENT HOOKS AND ROLLERS RADIO REMOTE CONTROL

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, BERTOJA SEMITRAILER 13.80m BRAND NEW, READY FOR REGISTRATION Galvanised double hydraulic ramp Protective sideboard on neck Winch preparation Self-steering axle CONTACT: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30am–7:00pm - SATURDAY 8:30am–2:00pm Gbsdpoxpi A Refx Adgjk WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semitrailer - Refrigerated Tanker Semitrailer – Lamberet - Schmitz Isuzu - Fixed Platform - Crane - Tipper - 4 Axles - Rear 4 Axles - Tway-T-Way-540-460 HP - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tailgate Loader - Refrigerated Case - Insulated with Fridge - Van Domenico Truck srl accepts no liability for any discrepancies in technical data, fittings, or features, which may differ from those described. We recommend verifying the features of each specific vehicle.

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel Gbjdpfx Adohlz S Nogek • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Gsdpfx Adjiu Er Aogjbk - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2006, skupna širina: 2.850 mm, vzmetenje: drugo, velikost pnevmatike: 285/70R19.5, barva: črn, Leto izdelave: 2006, Oprema: ABS, = Additional Options and Equipment = - Central lubrication = Remarks = Faymonville Jeep Dolly D3 Year: 10-2006. 1 x lift axle. 1 x friction-steered axle (trailing steering axle). Air suspension. Maximum technical weight: 56,000 kg. Faymonville STBZ-5VA Year: 10-2006. Pendulum axles. Removable gooseneck. Movable platform. Extendable load bed: 400 cm. Load bed dimensions: 650 + 400 cm. Gooseneck load capacity: 50,000 kg. Maximum technical weight: 119,680 kg. = Further Information = Axle Configuration Tyre size: 285/70R19.5 Brakes: Drum brakes Front Axle 1: Twin tires; Left inside tread: 15%; Left outside: 60%; Right inside: 60%; Right outside: 60%; Suspension: Air suspension Front Axle 2: Twin tires; Left inside tread: 30%; Left outside: 30%; Right inside: 40%; Right outside: 60%; Suspension: Air suspension Front Axle 3: Twin tires; Steered; Left inside tread: 30%; Left outside: 70%; Right inside: 60%; Right outside: 70%; Suspension: Air suspension Rear Axle 1: Twin tires; Steered; Left inside tread: 30%; Left outside: 60%; Right inside: 40%; Right outside: 70%; Suspension: Hydraulic suspension Rear Axle 2: Twin tires; Steered; Left inside tread: 50%; Left outside: 50%; Right inside: 30%; Right outside: 75%; Suspension: Hydraulic suspension Rear Axle 3: Twin tires; Steered; Left inside tread: 60%; Left outside: 60%; Right inside: 60%; Right outside: 60%; Suspension: Hydraulic suspension Rear Axle 4: Twin tires; Steered; Left inside tread: 60%; Left outside: 60%; Right inside: 40%; Right outside: 50%; Suspension: Hydraulic suspension Rear Axle 5: Twin tires; Steered; Left inside tread: 70%; Left outside: 70%; Right inside: 20%; Right outside: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Gedpfx Aoxbng Esdgebk Model number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information; however, no rights can be derived from the listed texts.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 18.520 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 450 mm, skupna dolžina: 18.520 mm, skupna širina: 2.750 mm, skupna višina: 450 mm, vzmetenje: hidravlika, velikost pnevmatike: 245 / 70 R17.5 | Load index 146/146F, barva: bela, Leto izdelave: 2014, Farbe: Weiß Radstand: 136 cm Nutzlast: 53.800 kg Ladebodenhöhe: 45 cm ausziehbar gebremst Hersteller: Goldhofer Typ: STZ-VP 3-55/80A Fahrgestellnummer (VIN): WG0STZV39E0036631 Baujahr: 2014 Gewichte: Sattellast: 35.000 kg Achslast: 12.000 kg Gesamte Achslast: 36.000 kg zulässiges Gesamtgewicht (zGG): 71.000 kg Leergewicht: 17.200 kg Zuladung: 53.800 kg Abmessungen: Länge: 15.520 mm + 3.000 mm Verlängerung Ladeflächenlänge: 6.300 mm + 3.000 mm Ladeflächenbreite: 2.750 mm Ladebodenhöhe: 450 mm Aggregathöhe: 1.100 mm (+385 mm / -215 mm) Sattelhöhe: 1.390 mm Achsen: BPW Eco Pendelachsen Alle Achsen hydraulisch gelenkt Bereifung: 245/70R17.5 ABS / EBS Weitere Ausstattung: 1x ausziehbar Hydraulikanlage über Nebenantrieb (PTO) des Zugfahrzeugs Abnehmbare Schwanenhals mit Frontladerampen Baggerstielmulde Funk- und Kabel-Fernbedienung Zurringe Rungentaschen Holz-Ladeboden Edelstahl-Werkzeugkasten 2x Reserverad + Halter Arbeitsscheinwerfer Heckstoßstange mit Beleuchtung 3,5'' Königszapfen Zentralschmieranlage Beka-Max Gjdpfexyh I Tjx Adgobk = Weitere Informationen = Allgemeine Informationen Baujahr: 2014 Achskonfiguration Reifengröße: 245 / 70 R17.5 | Lastindex 146/146F Achsenmarke: BPW hydraulische Pendelachsen Federung: hydraulische Federung Hinterachse 1: Doppelbereifung; max. Achslast: 12 t; gelenkt Hinterachse 2: Doppelbereifung; max. Achslast: 12 t; gelenkt Hinterachse 3: Doppelbereifung; max. Achslast: 12 t; gelenkt Gewichte Leergewicht: 17.200 kg Zuladung: 53.800 kg zGG: 71.000 kg Funktionalität Aufbau ausziehbar: Ja Zustand Technischer Zustand: gut Optischer Zustand: gut Finanzielle Informationen Preis: auf Anfrage Weitere Informationen Bitte wenden Sie sich für weitere Informationen an Stefan Schaapveld.

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg Gjdpfxoxarl Nj Adgobk - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks