Tovornjaška dvižna delovna ploščad

HUMBAUR Dreiseitenkipper HTK 754020

Stanje: rabljeno, največja dovoljena obremenitev: 5.150 kg, skupna masa: 7.500 kg, konfiguracija osi: 2 osi, prva registracija: 04/2022, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna širina: 2.180 mm, skupna višina: 1.450 mm, Leto izdelave: 2022, Oprema: ABS, Za vprašanja glede vozila je vam na voljo gospod Seidel (na tel.).---- Humbaur HTK 754020 trostranski tandem kiper priklopnik ----* Nastavljivo vlečno oje * Wabco-ABS * Popolnoma pocinkan * ADR osi * Vlečni obroč 40 mm Klodpsxgkq Refx Adhsl * Zadnja podporna noga * Dimenzije nakladalnega prostora: Dolžina: 4.000 mm Širina: 2.050 mm Višina: 400 mm * Dovoljena skupna masa: 7.500 kg * Lastna masa: 2.350 kg * Nosilnost: 5.150 kg Na željo vam pripravimo ponudbo za leasing ali financiranje. G. Seidel vam je na voljo na navedeni telefonski številki. Več informacij najdete na naši spletni strani. !!! Pridržujemo si pravico do napak, sprememb in predhodne prodaje !!!

Stanje: novo, največja dovoljena obremenitev: 5.600 kg, skupna masa: 7.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.030 mm, višina nakladalnega prostora: 400 mm, skupna širina: 2.200 mm, skupna višina: 1.400 mm, Leto izdelave: 2025, * Humbaur HTK 754020 * Three-way tipper trailer * New vehicle * Tandem axle * Year of manufacture: 2025 * Gross vehicle weight: 7,500 kg * Unladen weight: 1,900 kg * Payload: 5,600 kg * Overall dimensions: 6,040 mm x 2,200 mm x 1,400 mm * Internal dimensions: 4,000 mm x 2,030 mm x 400 mm * Loading height: 920 mm * Steel side and rear drop sides, foldable and removable * Rear drop side swinging with central locking * Height-adjustable tow bar approx. 590 mm - 930 mm * Torsion suspension and parabolic springs * Integrated shaft for ramp storage Kedpfx Adsttfm Hjhjll * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4 mm steel sheet * 3 pairs of recessed lashing points * Air brake with load-dependent braking (ALB) / anti-lock braking system (ABS) ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to sell the item elsewhere, as it is also offered on other platforms. We strongly recommend an inspection and assessment to avoid any misunderstandings regarding condition and suitability. Viewings and inspections are possible at any time by prior arrangement and are expressly encouraged!!! Images are for reference only and may include optional, chargeable accessories. The stated internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGES AND EXTRA PAYMENTS POSSIBLE!!! Display location: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, ++Availability upon request++ ++Delivery possible, freight charges upon request++ HTK 754020 Weights Technical gross vehicle weight: 7,500 kg Drawbar load: 500 kg Unladen weight: approx. 2,250 kg Payload with standard equipment: approx. 5,250 kg Dimensions Platform dimensions (L x W x H): approx. 4,000 x 2,030 x 400 mm Side wall height: approx. 400 mm Loading height (unladen): approx. 920 mm Drawbar length (free): approx. 1,900 mm Coupling height (unladen): approx. 560–840 mm Overall dimensions (L x W x H): approx. 6,070 x 2,200 x 1,450 mm Tyres: 4 x 215/75 R 17.5 Tip angle lateral/rear: 45° / 48° Oil requirement: 10 L V-value mechanical: 14.8 V-value pneumatic: 11.1 2 pairs of recessed folding lashing eyes per corner, 3,000 kg each 3 pairs of recessed lashing brackets along loading bed, 2,000 kg each -- Axles Axle units from renowned manufacturers; Suspension Maintenance-free parabolic suspension with load equalisation; Tyres Tyres according to manufacturer’s choice; Brake system ABS braking system according to ECE directive with ALB function; ABS connector ISO 7638; Spindle parking brake; 2x polarity safe coupling heads red/yellow ISO 1728; Electrics 24 V lighting system with multi-chamber rear lights and LED side marker lights; 15-pin plug connector for lights; Towing device Drawbar with 40 mm DIN screw towing eye, galvanised, Infinitely adjustable via crank; Kodjwk Efmopfx Adhjll Chassis Robust, welded, hot-dip galvanised frame; Lockable recess for 2 optional loading ramps; Equipment Rigid side underrun protection installed from the start of the bed to the 1st axle; Mudguards with splash guards on front and rear axles; 2 wheel chocks with holder; Side and rear contour markings; Space for single-line license plate; Support Heavy-duty automatic jockey wheel; Hydraulics Three-way hydraulic tipper controlled via towing vehicle (max. 200 bar); Five-stage nitrided cylinder with stroke limitation and safety cables; Hydraulic quick coupling SVK BG3 as single-circuit connection; Platform Platform floor made of 4 mm steel plate; Reinforced, hot-dip galvanised platform frame; 4 ball cup bearings with 2 polarity safe tilt bearing bolts; Side Walls Laser-welded high-quality steel side walls, 400 mm high; Side walls foldable and removable; Rear flap foldable, removable, and swinging with central locking; Front wall made of steel, removable; Side walls primed and painted according to RAL (colour of your choice); +++ Without loading ramps => Optional at a surcharge of €1,590 net plus VAT 1 pair aluminium loading ramps incl. support feet at rear Length x width approx. 3,050 x 400 mm Load capacity approx. 4,390 kg/pair for a wheelbase of 1,500 mm Weight/piece: approx. 31 kg Ramp angle: approx. 16° +++ +++ Side walls, loading bed, and chassis frame hot-dip galvanised by immersion bath (side walls hot-dip galvanised / not painted!) +++ -- All information subject to change -- Illustrations may differ --

Stanje: novo, lastna masa: 2.250 kg, največja dovoljena obremenitev: 5.250 kg, skupna masa: 7.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.070 mm, širina tovornega prostora: 1.450 mm, višina nakladalnega prostora: 2.200 mm, vzmetenje: zrak, velikost pnevmatike: 215/75 r15,7, barva: oranžna, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, HUMBAUR 7.5 t Tandem Three-way Tipper with Ramp Compartment, Type HTK 754020 Premium INCLUDES HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDES HOT-DIP GALVANIZED TIPPER BODY INCLUDES LOCKABLE RAMP COMPARTMENT WITH LID (privacy cover) Equipment: * Permissible total weight: 7,500 kg * Payload approx. 5,250 kg * Loading area approx. 4,000 x 2,030 mm * Unladen loading height approx. 920 mm * Overall dimensions: LxWxH approx. 6,070 x 2,200 x 1,450 mm * Tipper bed made from 4 mm fine-grain steel * Tipper body & chassis fully hot-dip galvanized * Side panels available in custom RAL color (optionally galvanized at extra charge) Kjdpfx Aden Sl Htjhsll * Quality laser-welded steel side panels, 400 mm high * Side and rear panels foldable, removable, and swinging, with central locking; bolted and quickly removable rear stanchions, galvanized * Robust front wall made of galvanized steel, bolted and removable * Infinitely height-adjustable drawbar for coupling heights unladen approx. 560 - 900 mm * DIN bolt-type towing eye Ø 40 mm * Heavy-duty automatic jockey wheel * 2 recessed 3 t lashing rings in the corners * 3 pairs of 1 t drop lashing shackles recessed in the outer frame * Tipping angle (side/rear): 45°/48° * 2 telescopic folding supports at the rear * Lockable storage compartment with plastic rollers for 2 optional ALU loading ramps integrated into the frame * Dual-circuit air brake system with ALB function * ABS braking system 24 Volts * Spindle parking brake * Hydraulic three-way tipping system, operated via towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limitation and safety cables; Hydraulic quick-coupling SVK BG3 as single-circuit connection * Mudguards with splash protection system * Chassis frame and drawbar hot-dip galvanized by immersion * Tyres 215/75 R17.5 * Maintenance-free parabolic suspension with load equalization * Electrics: 15-pin, 24 Volts * Brake connection: 2 color-coded (red/yellow) ISO 1728 coupling heads Your benefits: * Optimum corrosion protection through hot-dip galvanizing by immersion * Safe loading and unloading via telescopic folding supports at the rear * Simple and easy handling due to the patented safety system for ALU loading ramps * Ideal cargo securing options with standard lashing points * Infinitely height-adjustable drawbar enables compatibility with various towing vehicle coupling heights * Low tare weight => high payload Optional extras (at additional cost): * 1 pair ALU loading ramps (4.4 t/pair) with support legs at the rear, length approx. 3,050 mm x width approx. 400 mm (approx. 31 kg/unit) * Plastic toolbox mounted under the loading area * Galvanized side panels * Electric-hydraulic system 24 Volts with battery and remote control * Steel extensions, etc. *Stock unit – available immediately *Subject to prior sale *Ex-works price – Gersthofen