Nizki nakladalnik

Nooteboom Semidieplader + Hydraulisch Rampen

Stanje: rabljeno, največja dovoljena obremenitev: 36.216 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.100 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2024, Oprema: ABS, FAYMONVILLE MAX100 3-axle SANH semi low-loader forklift transport trailer First registration 10/2024 Unladen weight approx. 13,200 kg Saddle height 1,150 mm Length of low-bed 9,300 mm Gooseneck length 3,800 mm Internal width 2,480 mm Loading height in low-bed 860 mm Height-adjustable tarpaulin cover, adjustable by approx. 400 mm Gsdpfex Nlhrjx Abaein EDSCHA sliding roof, can be moved forward The body can be hydraulically extended at the rear portal by approx. 750 mm Loading platform after gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, gooseneck and low-bed with grating flooring, above axles with checker plate and integrated sand coating Two-part steel ramps approx. 3,185 + 1,420 mm, width each 1,250 mm, also with grating surface, max. load 30,000 kg Tyres: 13 pieces, 235/75 R 17.5 BPW axles with drum brakes 1st axle: LIFT AXLE 3rd axle: SELF-STEERING AXLE Air suspension with lifting/lowering function WABCO Trailer EBS E-hydraulics 24 volt RENTING is the new BUYING – with us also available immediately as a full-service rental.

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips Gjdpeuadk Njfx Abasin - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: dober (rabljeno), prevoženi kilometri: 342.344 km, moč: 257 kW (349,42 KM), prva registracija: 11/2006, vrsta goriva: dizel, velikost pnevmatike: 385/65 R22,5, konfiguracija osi: 6x4, medosna razdalja: 5.580 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 3, vzmetenje: jeklo, število sedežev: 2, Leto izdelave: 2006, Oprema: ABS, električno upravljanje oken, spojka prikolice, žerjav, = Additional Options and Accessories = - 3 axles - 6x4 drive - Leaf spring suspension - Speed limiter - Hydraulic system - Hub reduction - Radio - Beacon - Feed tube - Differential lock - PTO (power take-off) = Notes = Crane Number of hydraulic extensions: 2 Number of stabilizer legs: 2 Number of additional functions: 2 = Further Information = Giodpfx Absw I Ha Soaon General Information Number of doors: 2 Cab: TRAKKER, single cab License plate: 1PKG353 Technical Information Number of cylinders: 6 Engine displacement: 7,790 cc Drivetrain Engine type: IVECO CURSOR 8 Axle configuration Front axle: Tire size: 385/65 R22.5; Max. axle load: 8,000 kg; Steering axle Rear axle 1: Tire size: 315/80 R22.5; Dual tires; Max. axle load: 10,000 kg Rear axle 2: Tire size: 315/80 R22.5; Dual tires; Max. axle load: 10,000 kg Weights Unladen weight: 12,280 kg Payload capacity: 13,720 kg Gross vehicle weight: 26,000 kg Max. towing capacity: 44,000 kg Functionality Crane: Fassi F120.22, year of manufacture: 1999 Body brand: HYVALIFT Extendable body: Yes Condition Technical condition: Good Visual condition: Good

Stanje: rabljeno, lastna masa: 22.300 kg, dvižna višina: 26.600 mm, tip droga: simpleks, Leto izdelave: 2025, obratovalne ure: 16 h, skupna dolžina: 8.250 mm, skupna širina: 2.530 mm, skupna višina: 3.120 mm, velikost sprednje pnevmatike: 445/65 R22,5, velikost zadnje pnevmatike: 445/65 R22,5, težišče tovora: 600 mm, dolžina vilic: 1.200 mm, širina nosilnega okvirja vilic: 1.040 mm, gorivo: dizel, nosilnost: 8.000 kg, številka stroja/vozila: FANL1086303, - Vehicle: Single auxiliary hydraulics - Mast: Single auxiliary hydraulics - Fork carriage: Fork carriage with forks (FEM) - Full cab, split left-hand door - Overall height with operator protective roof: 3,120 mm - Heating & air conditioning - Integrated particulate filter with AdBlue - 2 x work lights front - 1 x reverse light rear - Lighting system with parking and driving lights, brake lights and indicators incl. German road equipment (StVZO) - Rotating beacon Giodpfx Ajw Uxrtobasn - Reverse warning signal - Speed limiter: 20 km/h - Roof protection grille - Exterior mirrors - Height-adjustable steering column - Access control: key switch - Driver's seat comfort (fabric cover) - Single-pedal operation - Joystick control - Magni rotating telescopic handler RTH 8.27 - STOCK MACHINE - Load capacity: 8,000 kg at 600 mm load center distance - Slew range: 360° continuous - Boom: sturdy boom with internal hoses - Max. lift height: 26.60 m - Max. outreach: 23.10 m - Engine: diesel engine Volvo TAD 582 VE Stage V - 160 kW (218 hp) at 2,300 rpm - Drive: hydrostatic all-wheel drive - Chassis: monolithic, heavy-duty frame construction with automatic leveling - Scissor outriggers - Brakes: service brake: hydraulic oil-bath multi-disc brake at each axle - Parking brake: hydraulic negative brake - Tires: 445/65 R22.5 - Steering: front-wheel, all-wheel steering and crab steering - Dimensions: length 8,250 mm - Width 2,530 mm - Ground clearance 310 mm - Gradeability: 40% - Weight: 22,300 kg - Cab: comfortable overpressure cab, 1,030 mm wide - Fully enclosed and airtight - 100% fresh air filter - Safety glass with roof protection grille - Opening rear window - Lockable cab door (split) - Windscreen wiper with washer - Rear window wiper - Interior cab lighting - Height and tilt adjustable steering column - Multi-adjustable comfort seat with lap belt - Air conditioning and heating - Premium seat (electrically tiltable, air suspension with headrest) - Working hydraulics/control: load-sensing system - Two 2-axis joysticks with armrests Danfoss with deadman function - CAN-bus technology - Radio remote control - Lighting: two headlights front (parking, low beam and high beam), indicator system, tail and brake lights, reverse lights, number plate lighting - Control and monitoring system: - 10-inch multifunction touchscreen - Additional control via rotary knob - Display and operation of: - Operating states - Driving settings - Stabilizer configurations and various parameters - Load chart depending on attachment - Automatic attachment recognition - RFID - Rear-view camera (displayed on multifunction touchscreen) - Attachments: fork carriage with forks (FEM) - Speed: Standard 20 km/h (40 km/h optional) - Paint: red - Documents: CE certificate, TÜV certificate - All other items are optional equipment and may replace standard features - 2 LED headlights top of cab - front - 2 LED headlights top of cab - rear - 2 LED headlights on boom - Plastic pads for outriggers (incl. holder) - LSP 0.6 Ref: FANL1086303

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Gedoyhkrrspfx Abaein Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform