Priklopnik za platformo

Faymonville telemax

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2016, Oprema: ABS, Visitez notre site web, où vous trouverez l’ensemble de notre parc de véhicules avec de nombreuses autres photos et informations dans plusieurs langues. SEL 7432 (10.2026/04.2026) Faymonville Telemax Télescopique / 13 650 mm – 21 550 mm Homologation allemande 1ère mise en circulation : 01.2016 PTAC technique (kg) : 48 000 PTAC autorisé (kg) : 42 000 Poids à vide (kg) : 9 500 N° de châssis (VIN) : YAFSR3000G0018145 Contrôle technique (HU) : 02.2025 / SP : 08.2025 Hpsdpfx Aev Dp H Aebpoa PNEUS ET ESSIEUX : Pneumatiques : 235/75 R 17,5 Configuration des essieux : 3 essieux 3ème essieu autodirectionnel Suspension pneumatique Freins à tambour CARROSSERIE Extension de plateau (mm) : 7 900 AUTRES SPÉCIFICITÉS : Anneaux d’arrimage Rail pour poches à ranchers Télescopique DOCUMENTS DU VÉHICULE : Carte grise Certificat de conformité Documents supplémentaires sur demande avec supplément. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC d. (Deutsch, Bosanski) L. OBODYNSKA Ukrainien/Українська, Russe/Русский Nous parlons : ALLEMAND, ANGLAIS, ITALIEN, ESPAGNOL, PORTUGAIS, UKRAINIEN, RUSSE, POLONAIS Même si nous nous efforçons d’assurer l’exactitude des informations, nous ne pouvons pas garantir l’absence d’erreurs ou d’omissions. Nous invitons nos clients à consulter les photos disponibles. Les dimensions indiquées sont approximatives. Nos véhicules sont vendus en état, tels qu’ils se présentent. Nous invitons les clients à venir voir le véhicule pour évaluer l’état sur place. Nous offrons aussi la possibilité d’un essai routier. Il est important de noter que les batteries livrées avec le véhicule sont celles installées au moment de la vente. Si le client souhaite de nouvelles batteries, nous pouvons fournir un devis sur demande.

Stanje: rabljeno, lastna masa: 11.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, skupna dolžina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5, Oprema: ABS, Faymonville Telemax F-S43 Low Loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | insertable stanchions | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | 13,500 mm + 7,900 mm + 8,100 mm | Subject to errors, input mistakes, and prior sale. Hpjdpfewm I Ipex Abpea

Stanje: rabljeno, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 06/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate delivery or at short notice, can be found on our website. Extract from the specification. Full equipment details available upon request. Loading area: * Gooseneck, length approx. 4,100 mm, with central beam * Loading area manufactured as a double extension version, length approx. 9,400 mm, with pneumatically operated locking mechanism * A welded intermediate table, approx. 200 mm wide, is permanently attached to the central beam * Supply lines are protected within the extendable beams and automatically adjust to the respective loading area length (exception: supply of the first locking mechanism) * For tractors: 4 x 2 and 6 x 2 Axles and suspension: * BPW axles and suspension; all axles are hydro-mechanically force-steered and installed on turntables * Technical air suspension with lift and lowering valve Tyres: * 235/75 R 17.5 3PMSF dual tires * Make of our choice. Load index 143/141J (144/144F) Braking system: * Braking system by WABCO EBS-E, compliant with EU regulations Metallisation: * Complete HRM metallisation (High Resistance Metallisation) * Entire steel structure shot-blasted, then hot finished with ZINACOR 850 (Zinc 85% – Aluminium 15%) Paintwork: Hedpjw E A Egsfx Abpopa * 6-stage final treatment: the entire steel structure is shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final coating applied with two layers of 2-component (acrylic) paint, single colour, followed by cavity sealing with special wax * Trailer colour: RAL 3002 Carmine Red * Rim colour: Silver grey * Lamp panel colour: RAL 9010 Pure White Accessories included: * Steel front wall, approx. 1,600 mm high, certified version according to EN12642:2016 XL. Maximum load capacity: 20,000 daN * 4 pairs of recessed lashing rings in the external frame of the gooseneck: the 3 front pairs of lashing rings are lying flat (LC 10,000 daN), the rear pair is foldable outwards (LC 10,000 daN) * 4 pairs of stake pockets set into the outer frame of the gooseneck for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted at the rear of the gooseneck loading floor for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 4 wheel chocks with brackets in front of the front wall * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B, static tested load approx. 50,000 kg * On the gooseneck and loading area, approx. 32 mm wooden floor enclosed in aluminium omega profiles * On the large cross-section extension tube, a locking position every approx. 500 mm * On the small cross-section extension tube, a locking position every approx. 1,000 mm. Therefore, a locking option every approx. 500 mm is achieved * 10 pairs of recessed flat lashing rings in the outer frame of the loading area, foldable outwards: one pair before the last axle and one at the rear crossmember of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets set into the outer frame of the loading area for insertable stakes approx. 100 x 50 mm * 3 transverse stake pocket rails mounted in the loading floor of the loading area for insertable stakes approx. 100 x 50 mm * 1 spare wheel holder under the loading area on the right in the direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading area on the left in the direction of travel * Access ladder mounted on the right in the direction of tra

Stanje: rabljeno, lastna masa: 10.300 kg, največja dovoljena obremenitev: 50.700 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, vzmetenje: zrak, velikost pnevmatike: 275/70 22,5, stanje pnevmatik: 50 odstotek, barva: siv, Leto izdelave: 2020, velikost sprednje pnevmatike: 275/70 22,5, velikost zadnje pnevmatike: 275/70 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference no. for inquiries: 40473 Faymonville, F-S43-1AAF * Year of manufacture: 2020 * ABS (Anti-lock Braking System) * Air suspension * Steering axle * Forced-steered axle * Air coupling head (red + yellow) * Spare wheel carrier * Connection plug 2x7-pin * Lift and lower device * Storage/toolbox * Telescopic – telescopic semi-trailer * Stake pockets * EBS (Electronic Braking System) * Connection plug 15-pin * Heavy-duty lashing eyes * Suspension: Air * Gross vehicle weight: 61,000 kg * Unladen weight: 10,300 kg * Payload: 50,700 kg * Permissible gross weight: 61,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 50% – 50% – Tyre size: 275/70 R22.5 * Tyre condition, 2nd axle: 50% – 50% – Tyre size: 275/70 R22.5 * Tyre condition, 3rd axle: 50% – 50% – Tyre size: 275/70 R22.5 * Tyre size: 275/70 R22.5 * Remote control * Removable stakes * Twistlock * Heavy-duty floor * Vehicle length: 13,900 mm – 21,900 mm * 3 axles with hydraulic steering * Platform height: 1,380 mm Liability disclaimer: Subject to change, prior sale, and errors excepted. Further photos and videos available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export / customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Delivery/transfer of commercial vehicles Hsdpfx Abexr Tqqepjpa Please contact our trained specialist staff – we’re happy to advise you.

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm Hjdpfxewvzg Rs Abpjpa * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)