Nizki nakladalnik

GOODYEAR K MAX T | 265/55 R 19.5 | trailer tire | with r...

Stanje: rabljeno, največja dovoljena obremenitev: 23.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 19.100 mm, Oprema: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF First registration: .23 Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Unladen weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max. capacity: 11,200 kg + 11,200 kg + 11,200 kg Kingpin load / fifth wheel load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyres: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further information available upon request by email! No guarantee for the accuracy of information/errors excepted! Nlsdpfx Abeu Ry T Rj Uek Details provided online are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability for errors, input mistakes and data transmission errors. Subject to change without notice. Permanent purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction and heavy-duty vehicles.

Stanje: novo, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Availability: Approx. 3–4 months after order confirmation Kässbohrer SLS HS3 3-Axle Low Loader, fixed/non-extendable NEW VEHICLE Axles / Brake System: - BPW axles with 17.5" drum brakes - 3rd axle is a trailing steering axle - 1st axle is a lift axle - WABCO braking system 4S/3M - 13 branded tyres, size 245/70 R17.5, on steel rims Low Loader: - Fifth wheel height: 1,250 mm - Low-bed length: 9,240 mm - 8 x 2 lashing rings (6 t) in outer frame - 6 x 2 lashing rings (6 t) on gooseneck - 6 x 2 lashing rings (6 t) on low-bed deck - Extendable side extensions for oversize loads: 300 mm - Galvanised grating floor - Colour: RAL 3020 Traffic Red - PARTIALLY METALLISED Loading Ramps: - Hydraulically adjustable ramps with galvanised grating floor - 4,200 mm long x 850 mm wide x 9° gradient - 2 kW electrohydraulic pump - NATO socket for operating the electrohydraulics incl. cable Gooseneck ramp: - 2,800 mm long x 2,550 mm wide x 10° gradient Nsdpevm Nm Usfx Ab Uslk - 2 accessory/toolboxes beneath the gooseneck ramp Miscellaneous: - 4 oversized load signs with mountings for rotating beacons - 1 toolbox on the right in the direction of travel - JOST front landing gear - Galvanised manual rear supports - 2-inch king pin - 24 V Aspöck lighting system - Spare wheel holder with spare wheel ---- Subject to errors, modifications, and prior sale! Location: KTH-Trailer GmbH, 47574 Goch, Germany.

Stanje: rabljeno, lastna masa: 8.340 kg, največja dovoljena obremenitev: 32.660 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2020, naslednji pregled (TÜV): 03/2025, dolžina tovornega prostora: 13.360 mm, širina tovornega prostora: 2.500 mm, skupna dolžina: 25.500 mm, skupna širina: 28.500 mm, skupna višina: 127.000 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: rdeča, Leto izdelave: 2020, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, emisijski razred: noben, Oprema: ABS, ABS, axle manufacturer SAF, aluminium two-part drive-on ramps, load capacity 20,000 kg, spring-assisted, air suspension with lift function, raise and lower capability, first axle is a lift axle, steered trailing axle + hydraulic maneuvering aid with radio remote control, rear steering, wheel recesses, stake pockets, toolbox, aluminium supports, width extension panels, 2 x wheel recesses with aluminium covers, excavator arm recess, drop legs at rear, load gauge, NATO socket for electro-hydraulics, 2 x 3-chamber LED rear lights, container bridge, twistlocks, 2 x LED work lights, equalizing block, coupling height 980 mm Nsdjtxrqqspfx Ab Uslk

Stanje: rabljeno, največja dovoljena obremenitev: 38.440 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2023, naslednji pregled (TÜV): 08/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment. Complete equipment details on request. - Loading platform with rear taper, approx. 1,000 mm x 8° - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm - JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) - BPW axles and suspension, 1 axle with trailing steering - Technical axle load: 12,000 kg each - Air suspension with lifting and lowering valve - Top coat single-color in RAL 3002 carmine red Nlsdpjxthz Tjfx Ab Ujk - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Electro-hydraulic unit located at the rear, under the loading platform - Load gauge for axle load determination, including load diagram - On the gooseneck: ALU side walls and tailgate, removable, approx. 2,440 x 400 mm (L x H) - One galvanized toolbox integrated in the tapered gooseneck - 6 pairs of stake pockets for insertable stakes approx. 100 x 50 mm on the outer frame of the platform - Galvanized, extendable widenings, approx. 230 mm per side - Lifting axle on the 1st axle - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 2 LED reversing lights mounted on the rear panel - HRM metallization (High Resistance Metallisation)

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Further Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Height of 5th Wheel (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty, extra-durable, BOX-type chassis design. Fully welded S355 steel chassis. Outer frame made of UPE 240 profile. Chassis Welding: Submerged automatic arc welding. Superstructure Welding: Automated robot welding. Axle (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12 ton axles Axle Lifting: 1st axle automatic lift Suspension (Type): Air suspension Steering Axles: 3rd axle self-steering King Pin (Type): 1-position, 1x coupling pin 2” (EU-approved), Çayırova brand Tires: 12+1 units, 245/70 R 17.5, Fulda or Pirelli or Goodyear brands Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brands Landing Gear: Mechanically operated on one side, two-speed, Gos brand Brake System: Wabco EBS (4S/3M) with RSS, EC-compliant, with ADR adaptation Brake Chamber: 1 axle with 2 emergency brake chambers 2 axles with 4 service brake chambers Electric System: 24V, 2x7 + 1x15 pin sockets, SAE standard with ADR adaptation, SABA brand • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x Registration plate lights • 2 x Rotating lights Floor: Above tyres and platform edging covered with chequered sheet and hardwood; the central surface is flat sheet steel Rear Loading Ramps: Hydraulically operated rear ramps with electric pump, cable remote push-button operation, rear ramp length 2,500 mm + 1,500 mm, width 900 mm. All ramps internally and externally sliding hydraulically. Short steel ramps behind the neck. Color: On request Paint Application: Sandblasting, chemical cleaning, HYZINC coating, epoxy primer and two coats of acrylic paint TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 pcs heavy-duty lashing rings (outer frame, mushroom type) • 4 x Certified Expray mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 Galvanized side extension brackets (250 mm + 250 mm) • 2 x Side protections, aluminium • 1 x Toolbox • 1 x Spare wheel carrier with 1 tyre (on gooseneck) • 2 x Manual support legs at the rear • 2 x Reflective tapes and reflector signs on rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 plate holder on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE Marking: yes Nsdpfx Abexhgz Io Uslk

Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks - Sheet metal mudguards with Clear-Pass Nodpewu Agiefx Ab Uslk - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection