Prikolica z nizko platformo

MÜLLER-MITTELTAL 14,4 to, Tand - Plateau- Tieflader, hydr. Rampen

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ---Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ---Axles: * 2 x 7 t Gigant axles ---Suspension: * Parabolic springs with equalizing aggregate ---Drawbar / Flange draw eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ---Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no vehicle-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ---General Attachments: * Support winch front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm front right external on the front wall * Side underrun protection * Plastic quarter mudguards ---Low Loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for subsequent installation of container locks * 400 mm bolted smooth sheet metal bulkhead * Bolted rear stakes * Dropsides with spring balancer ---Load Securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * One 6.3 t lashing ring at each front and rear corner * Various drilled holes in the front and rear crossmember for 1.2 t lashing options Dcodsrwc R Repfx Adroc ---Ramps: * One-piece hydraulic grate loading ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Hydraulic flow divider in the trailer (with hydraulic pump capacity in the truck from over 40 l/min up to max. 140 l/min) ---Paintwork: * Chassis, drawbar, front wall, mechanical drop supports and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange draw eye painted in a shade of black * Dropside paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color available for an additional charge ---Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ---Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * Drawbar extension by 250 mm to 2,250 mm total length ----Electrics / Lighting: * Tire pressure monitoring with display function in truck via EBS signal - no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on headboard exterior * Side underrun protection * Plastic quarter mudguards ----Low Loader Area: * 50 mm softwood flooring * Pre-fitting at headboard for retrofitting container locks * Bolted 400 mm smooth plate headboard * Bolted rear stanchions * Sideboards with spring assist ----Load Securing: * Perforated outer frame, approx. 45°, bent, with 2 t lashing capacity every 480 mm * Option for 3 t retractable lashing rings every 600 mm * One 6.3 t lashing ring in each corner front and rear * Various bores for 1.2 t lashing points in headboard and rear crossmember ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm proximity) * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40l/min up to max. 140l/min) ----Paintwork: * Chassis, drawbar, headboard, mechanical drop supports, and ramps hot-dip galvanized Dcsdpfxsrwc R Ao Adroc * Axles, springs, air tanks, front support winch, and flange eye painted in black * Sideboard paint in RAL 9010 pure white * Painting of side panels available in any RAL color at extra cost ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: Djdpfx Aexvgrpjdrjcc ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – truck-side installation not required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with both 12 and 24 V electrical systems ----General Equipment: * Front support winch * Outward-folding rear supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted on the right front side of the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fixture in front of bulkhead for retrofitting container locks * 400 mm screwed bulkhead made of smooth sheet * Removable rear stanchions * Drop sides with spring assist ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece hydraulic open-grid loading ramps, approx. 2,750 x 600 mm (can be telescoped to 20 mm spacing) * Hydraulic flow divider in the trailer (for pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical rear supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange eye painted black * Drop sides painted in RAL 2011 deep orange * Side walls can be painted in any RAL color for an extra charge ----Notes: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf