Polpriklopnik z nizkim nakladalnikom

MAX Trailer 2-Achs-Tiefbett mit Pendelachsen

For every used semi-trailer, you will receive a current and complete inspection and function report.

Gooseneck:
- Gooseneck in SNT design for optimal loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- For tractors: 4 x 2, 6 x 2, and 6 x 4

Loading platform:
- Lowbed with external girders in extendable "SUPER LOW" design, approx. 6,850 mm long
- Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking
- 5 pairs of folding lashing rings on the outside
- 6 pairs of threaded blocks on the inner girder for mounting bolt-on RUD rings

Rear running gear:
- Rear running gear with closed outer frame, chequer plate deck, and continuous prismatic excavator recess approx. 1,250/700 x 505 mm, open at the rear

Pendulum axle and tyres:
- "PENDEL-AXLE", all axles hydromechanically forced-steered
- Burst protection valve on axle leveling cylinders with automatic RESET function
- Hydraulic cylinders with shut-off valves and plug-in pins for securing in lifted position
- Axles finished with 2 coats of single-colour 2K paint in grey
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres 245/70 R 17.5

Accessories included:
- Prepared for bolt-on container lockings for 1x 20ft or 1x40ft container on the outer beams
- 2" kingpin
- One galvanized steel headboard approx. 400 mm high
- One spare wheel with holder
Knedpfjw S Tt Hex Ab Uof
- Front galvanized connection strip with yellow-red air couplings
- 4 wheel chocks with holders
- Remote cable control for steering both front and rear, with single-track axle alignment control
- Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings
- Electro-hydraulic power pack
- 2 wooden blocks 500x250x200 mm
- One bracket for rotating beacon at the rear
- One rear mudflap
- European reflective boards (red-yellow) at the rear of the trailer
- At the gooseneck and rear panel, left and right, each with a bracket for warning signs incl. socket
- Central lubrication system with 2 BEKAMAX pumps
- Axle load gauge incl. loading diagram
- 6 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings
- 2 pairs of bolted-on container supports on the outer beams, incl. 2 pairs of container locks for 1x20ft or 1x40ft containers
- On the gooseneck, removable aluminium drop sides and rear wall approx. 2,440 x 400 mm
- One INOX toolbox 1,350 x 400 x 400 mm on the gooseneck
- 5 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area
- Folding extensions, approx. 230 mm each side
- Extension boards made of hardwood
- Maximum load allowed on a 200 x 200 mm area: 3.5 t
- 1 pair of steel ramps for bridging the mounting hooks of the lowbed
- Loading surface with painted sand layer as anti-slip coating
- 2 reversing lights on the rear panel
- Bucket recess in the rear running gear closed front and rear with insertable plates
- Four extendable warning signs approx. 423 x 423 mm, extend by approx. 400 mm, with position lamp
- HRM metallization (High Resistance Metallisation) of the outer frame

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.